summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c/Kconfig.s3c64xx
AgeCommit message (Collapse)AuthorFilesLines
2023-05-08ARM: s3c: remove obsolete config S3C64XX_SETUP_IDELukas Bulwahn1-6/+0
Commit 0d297df03890 ("ARM: s3c: simplify platform code") removes the line in Makefile.s3c64xx to configure the inclusion of setup-ide-s3c64xx.c, with CONFIG_S3C64XX_SETUP_IDE. So, since then, config S3C64XX_SETUP_IDE has no effect and any further purpose. Remove the obsolete config S3C64XX_SETUP_IDE. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230508040433.13648-1-lukas.bulwahn@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-16ARM: s3c: simplify platform codeArnd Bergmann1-3/+0
Following down the now unused symbols and header files, some additional content can be dropped that is used by neither the s3c64xx DT support nor the crag6410 board. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16ARM: s3c: remove adc.cArnd Bergmann1-1/+0
This driver could not be enabled on s3c64xx for a long time because of the ARCH_MULTIPLATFORM dependency, so remove it. Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16ARM: s3c: remove most s3c64xx board supportArnd Bergmann1-206/+0
All traditional board files except for MACH_WLF_CRAGG_6410 were marked as unused, so remove them now. Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-02Merge tag 'arm-boardfiles-6.0' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM boardfile deprecation from Arnd Bergmann: "Over the past ten years, new machine support was based on device tree, and an initial set of about 400 boards using ATAGS with boardfile for booting were grandfathered in, with about half of them either removed or converted to DT over time. Based on the recent mailing list discussion I started, I have now turned the findings into a set of patches that marks most board files as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards. For the boards that are marked as unused, there are two final chances for potential users: The removal is scheduled to take place after the longterm stable kernel at the end of 2022, so users can stay on that version for another few years, and if anyone still has one of these machines and is planning to keep updating kernels beyond that version, they can speak up now to have their boards taken off the list again. Waiting for the LTS release also makes sure that there will be at least one longterm kernel that contains the recent multiplatform conversion along while still supporting all legacy boards. The short summary of the current status is: - The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known users and will be removed entirely. - The mmp and davinci platforms have DT support for the important machines and will become DT-only after this. - s3c64xx, dove, orion5x, and pxa keep some board files to allow those to be migrated over to DT more easily, but most board files are getting removed now. DT support on these platforms is partially working but requires changes to additional drivers for the other boards. - omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the moment but have some boards with known users. Removing the board files that nobody uses should make it easier to try a DT conversion if anyone cares. There is no explicit timeline what happens with the boards that remain after this removal, but I expect to revisit this in the future, and with most boards gone, there will be a good time to do a treewide review of platform drivers that never gained DT support and have no remaining in-tree board files" Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/ * tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency ARM: iop32x: mark as unused ARM: s3c: mark most board files as unused ARM: omap1: add Kconfig dependencies for unused boards ARM: sa1100: mark most boards as unused ARM: footbridge: mark cats board for removal ARM: mmp: mark all board files for removal ARM: ep93xx: mark most board files as unused ARM: davinci: mark all ATAGS board files as unused ARM: orion: add ATAGS dependencies ARM: pxa: add Kconfig dependencies for ATAGS based boards ARM: add CONFIG_UNUSED_BOARD_FILES ARM: add ATAGS dependencies to non-DT platforms
2022-07-22ARM: s3c: mark most board files as unusedArnd Bergmann1-10/+10
The s3c24xx platform is already scheduled for removal in early 2023, with s3c64xx meeting the same fate a year later. Most of the s3c64xx board files appear to be unused, as the better maintained ones already got converted to DT. The main exception is the Wolfson Cragganmore board, which remains in use as the reference design for Wolfson/Cirrus devices. As the other boards get removed, this one stays around along with the DT based machines. The s3c6400_defconfig file now disables the unused boards, while the s3c24xx defconfig files all turn on CONFIG_UNUSED_BOARD_FILES to remain usable. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-09ARM: s3c: Kconfig.s3c64xx: Fix indentationJuerg Haefliger1-8/+8
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Link: https://lore.kernel.org/r/20220609082154.115301-4-juerg.haefliger@canonical.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-21ARM: s3c: mark as deprecated and schedule removalKrzysztof Kozlowski1-1/+6
The Samsung S3C24xx and S3C64xx platforms are very old designs. S3C2416 was introduced in 2008 and S3C6410 in 2009/2010. They are not widely available anymore - out-of-stock on FriendlyArm (one of manufacturers of boards) and only few specialist stores still offer them for quite a high price. The community around these platforms was not very active, so I suspect no one really uses them anymore. Maintenance takes precious time so there is little sense in keeping them alive if there are no real users. Let's mark all S3C24xx and S3C64xx platforms as deprecated and mention possible removal in after 2022 for the first and 2024 for the lattere. The deprecation message will be as text in Kconfig, build message (not a warning though) and runtime print error. If there are any users, they might respond and postpone the removal. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220407072319.75614-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-11-21ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependenciesSam Protsenko1-1/+0
A separate Kconfig option HAVE_S3C2410_I2C for Samsung SoCs is not really needed and the i2c-s3c24xx driver can depend on Samsung ARM architectures instead. This also enables i2c-s3c2410 for arm64 Exynos SoCs, which is required for example by Exynos850. This is basically continuation of work made in following commits: - commit d96890fca9fd ("rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies") - commit 7dd3cae90d85 ("ARM: samsung: remove HAVE_S3C2410_WATCHDOG and use direct dependencies") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211121150558.21801-2-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2020-08-20ARM: s3c: move into a common directoryArnd Bergmann1-0/+350
s3c24xx and s3c64xx have a lot in common, but are split across three separate directories, which makes the interaction of the header files more complicated than necessary. Move all three directories into a new mach-s3c, with a minimal set of changes to each file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [krzk: Rebase, add s3c24xx and s3c64xx suffix to several files, add SPDX headers to new files, remove plat-samsung from MAINTAINERS] Co-developed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> https://lore.kernel.org/r/20200806182059.2431-39-krzk@kernel.org