summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100/assabet.c
AgeCommit message (Collapse)AuthorFilesLines
2023-05-26ARM: sa1100: address missing prototype warningsArnd Bergmann1-1/+1
There are three warnings for mach-sa1100 when building with W=1: arch/arm/common/sa1111.c:699:1: error: no previous prototype for 'sa1111_configure_smc' [-Werror=missing-prototypes] 699 | sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, | ^~~~~~~~~~~~~~~~~~~~ arch/arm/mach-sa1100/assabet.c:718:13: error: no previous prototype for 'assabet_init_irq' [-Werror=missing-prototypes] 718 | void __init assabet_init_irq(void) | ^~~~~~~~~~~~~~~~ arch/arm/mach-sa1100/pm.c:126:12: error: no previous prototype for 'sa11x0_pm_init' [-Werror=missing-prototypes] 126 | int __init sa11x0_pm_init(void) | ^~~~~~~~~~~~~~ The first two are only used locally and can be 'static', while the last one needs to include the right header. Link: https://lore.kernel.org/r/20230516153109.514251-12-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-03-06gpiolib: split linux/gpio/driver.h out of linux/gpio.hArnd Bergmann1-0/+1
Almost all gpio drivers include linux/gpio/driver.h, and other files should not rely on includes from this header. Remove the indirect include from here and include the correct headers directly from where they are used. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org>
2023-01-16ARM: sa1100: remove irda referencesArnd Bergmann1-34/+0
IRDA support is long gone, so there is no need to declare the platform device data. See-also: d64c2a76123f ("staging: irda: remove the irda network stack and drivers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> fixup sa1100 irda Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-25ARM: 9101/1: sa1100/assabet: convert LEDs to gpiod APIsLinus Walleij1-11/+13
Convert the Assabet LEDs to use the gpiod APIs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-09mm: pgtable: add shortcuts for accessing kernel PMD and PTEMike Rapoport1-1/+1
The powerpc 32-bit implementation of pgtable has nice shortcuts for accessing kernel PMD and PTE for a given virtual address. Make these helpers available for all architectures. [rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()] Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org [akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport1-1/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-05arm: add support for folded p4d page tablesMike Rapoport1-1/+1
Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate, and remove __ARCH_USE_5LEVEL_HACK. [rppt@linux.ibm.com: fix kexec] Link: http://lkml.kernel.org/r/20200508174232.GA759899@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-20Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-63/+28
Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04ARM: sa1100/assabet: convert serial to gpiod APIsRussell King1-63/+28
Convert the Assabet serial modem control signals to use the gpiod APIs rather than custom callbacks into platform code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-02-06regulator: fixed/gpio: Pull inversion/OD into gpiolibLinus Walleij1-1/+0
This pushes the handling of inversion semantics and open drain settings to the GPIO descriptor and gpiolib. All affected board files are also augmented. This is especially nice since we don't have to have any confusing flags passed around to the left and right littering the fixed and GPIO regulator drivers and the regulator core. It is all just very straight-forward: the core asks the GPIO line to be asserted or deasserted and gpiolib deals with the rest depending on how the platform is configured: if the line is active low, it deals with that, if the line is open drain, it deals with that too. Cc: Alexander Shiyan <shc_work@mail.ru> # i.MX boards user Cc: Haojian Zhuang <haojian.zhuang@gmail.com> # MMP2 maintainer Cc: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1 maintainer Cc: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> # EM-X270 maintainer Cc: Robert Jarzmik <robert.jarzmik@free.fr> # EZX maintainer Cc: Philipp Zabel <philipp.zabel@gmail.com> # Magician maintainer Cc: Petr Cvek <petr.cvek@tul.cz> # Magician Cc: Robert Jarzmik <robert.jarzmik@free.fr> # PXA Cc: Paul Parsons <lost.distance@yahoo.com> # hx4700 Cc: Daniel Mack <zonque@gmail.com> # Raumfeld maintainer Cc: Marc Zyngier <marc.zyngier@arm.com> # Zeus maintainer Cc: Geert Uytterhoeven <geert+renesas@glider.be> # SuperH pinctrl/GPIO maintainer Cc: Russell King <rmk+kernel@armlinux.org.uk> # SA1100 Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> #OMAP1 Amstrad Delta Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-05ARM: sa1100/assabet: switch to using gpio ledsRussell King1-86/+27
Switch over to using gpio leds now that we have the gpio driver for the assabet board register in place. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-05ARM: sa1100/assabet: add gpio keys support for right-hand two buttonsRussell King1-0/+30
Add gpio keys support for the right-hand two buttons on the Assabet, which can be used to wake up the CPU after PM. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-18regulator: fixed: Convert to use GPIO descriptor onlyLinus Walleij1-7/+14
As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. Intel MID portions tested by Andy. Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff Acked-by: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-24ARM: sa1100/assabet: convert to generic CF socketsRussell King1-1/+38
Convert Assabet to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-01ARM: sa1100/assabet: add BCR/BSR GPIO driverRussell King1-17/+54
Add a GPIO driver for the board control register/board status register for the sa1100/assabet platform. This allows us to transition a range of drivers to use the gpiod APIs rather than the platform private ASSABET_BCR_* interfaces. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2014-12-31arm: sa1100: move irda header to linux/platform_dataDmitry Eremin-Solenikov1-1/+1
In the end asm/mach/irda.h header is not used by anybody except sa1100. Move the header to the platform data includes dir and rename it to irda-sa11x0.h. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01ARM: 8025/1: Get rid of meminfoLaura Abbott1-1/+1
memblock is now fully integrated into the kernel and is the prefered method for tracking memory. Rather than reinvent the wheel with meminfo, migrate to using memblock directly instead of meminfo as an intermediate. Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-13ARM: sa11x0: assabet: clean up IrDA power settingRussell King1-6/+3
Minor clean up to the IrDA power setting support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-13ARM: sa11x0: assabet: allow UCB1300 to wake up AssabetRussell King1-0/+1
The UCB1300 is capable of waking up the Assabet. Indicate to the driver that wakeup from the UCB1300 is supported. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-13ARM: sa11x0: assabet: better reset handlingRussell King1-2/+133
The codec reset pin is connected to several peripherals. When the reset is released, unfortunately the ADV7171 powers itself up rather than remaining in power-down mode. As we don't have a driver for this device, we end up needlessly consuming an additional 330mW. Not only that but we should have a way to arbitrate the reset signal. This patch provides that facility: we program the ADV7171 to sleep mode whenever the reset is released, and we release the reset when any one of the three peripherals requests the reset to be released. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-29ARM: sa11x0/assabet: ensure CS2 is configured appropriatelyRussell King1-0/+3
The CS2 region contains the Assabet board configuration and status registers, which are 32-bit. Unfortunately, some boot loaders do not configure this region correctly, leaving it setup as a 16-bit region. Fix this. Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-15ARM: sa1100/assabet: include platform_device.h directlyArnd Bergmann1-0/+1
Patch "16559ae kgdb: remove #include <linux/serial_8250.h> from kgdb.h caused assabet_defconfig to fail, since assabet.c did not itself include linux/platform_device.h, although it needs it: In file included from include/linux/mfd/ucb1x00.h:13:0, from arch/arm/mach-sa1100/assabet.c:19: include/linux/mfd/mcp.h:22:16: error: field 'attached_device' has incomplete type include/linux/mfd/mcp.h:48:23: error: field 'drv' has incomplete type In file included from arch/arm/mach-sa1100/assabet.c:19:0: include/linux/mfd/ucb1x00.h:137:16: error: field 'dev' has incomplete type arch/arm/mach-sa1100/assabet.c: In function 'assabet_init': arch/arm/mach-sa1100/assabet.c:343:3: error: implicit declaration of function 'platform_device_register_simple' [-Wimplicit-function-declaration] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-24ARM: delete struct sys_timerStephen Warren1-1/+1
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16ARM: move serial_sa1100.h header file to linux/platform_dataRussell King1-1/+1
This is really driver platform data, so move it to the appropriate directory. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-09ARM: assabet: fix bogus warning in get_assabet_scr (again)Arnd Bergmann1-1/+1
Russell fixed this bogus warning before in 2f3eca8b4f "Shut up gcc warning in assabet.c", but apparently gcc has become smarter (or dumber) since 2005, and the same warning came up again. This uses the uninitialized_var() macro to convince gcc that the variable is actually being initialized. 100 times in fact. Without this patch, building assabet_defconfig results in: arch/arm/mach-sa1100/assabet.c: In function 'fixup_assabet': arch/arm/mach-sa1100/assabet.c:397:6: warning: 'scr' may be used uninitialized in this function [-Wuninitialized] arch/arm/mach-sa1100/assabet.c:389:16: note: 'scr' was declared here Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-09-14ARM: sa1100: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the sa1100 include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jochen Friedrich <jochen@scram.de>
2012-08-13Merge branch 'for-arm-soc' of ↵Arnd Bergmann1-0/+85
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers From Bryan Wu <bryan.wu@canonical.com>: Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a new generic led trigger for CPU not only for ARM but also for others. For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to trigger idle start or idle end event. These patches convert old style LED driver in arch/arm to gpio_led or new led driver interface. Against 3.5 release and build successfully for all the machines. Test ledtrig-cpu driver on OMAP4 Panda board. v9 --> v10 * fix compiling issue on versatile_defconfig reported by Russell King * rebase to 3.5 kernel and move patches to new git tree v8 --> v9: * use mutex to replace rw_sema pointed out by Tim Gardner * add a new struct led_trigger_cpu * add lock_is_inited to record mutex lock initialization v6 --> v7: * add a patch to unify the led-trigger name * fix some typo pointed * use BUG_ON to detect CPU numbers during building stage v5 --> v6: * replace __get_cpu_var() to per_cpu() * remove smp_processor_id() which is wrong with for_each_possible_cpu() * test on real OMAP4 Panda board * add comments about CPU hotplug in the CPU LED trigger driver v4 --> v5: * rebase all the patches on top of latest linux-next * replace on_each_cpu() with for_each_possible_cpu() * add some description of ledtrig_cpu() API * remove old leds code from driver nwflash.c, which should use a new led trigger then * this trigger driver can be built as module now v3 --> v4: * fix a typo pointed by Jochen Friedrich * fix some building errors * add Reviewed-by and Tested-by into patch log v2 --> v3: * almost rewrote the whole ledtrig-cpu driver, which is more simple * every CPU will have a per-CPU trigger * cpu trigger can be assigned to any leds * fix a lockdep issue in led-trigger common code * other fix according to review v1 --> v2: * remove select operations in Kconfig of every machines * add back supporting of led in core module of mach-integrator * solidate name scheme in ledtrig-cpu.c * add comments of CPU_LED_* cpu led events * fold patches of RealView and Versatile together * add machine_is_ check during assabet led driver init * add some Acked-by in patch logs * remove code for simpad machine in machine-sa11000, since Jochen Friedrich introduced gpiolib and gpio-led driver for simpad * on Assabet and Netwinder machine, LED operations is reversed like: setting bit means turn off leds clearing bit means turn on leds * add a new function to read CM_CTRL register for led driver * 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: ARM: use new LEDS CPU trigger stub to replace old one ARM: mach-sa1100: retire custom LED code ARM: mach-omap1: retire custom LED code ARM: mach-pnx4008: remove including old leds event API header file ARM: plat-samsung: remove including old leds event API header file ARM: mach-pxa: retire custom LED code char: nwflash: remove old led event code ARM: mach-footbridge: retire custom LED code ARM: mach-ebsa110: retire custom LED code ARM: mach-clps711x: retire custom LED code of P720T machine ARM: mach-integrator: retire custom LED code ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger ARM: mach-shark: retire custom LED code ARM: mach-ks8695: remove leds driver, since nobody use it ARM: mach-realview and mach-versatile: retire custom LED code ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers led-triggers: create a trigger for CPU activity Conflicts: arch/arm/mach-clps711x/p720t.c arch/arm/mach-sa1100/leds-cerf.c arch/arm/mach-sa1100/leds-lart.c Let's hope this is the last time we pull this and it doesn't cause more trouble. I have verified that version 10 causes no build warnings or errors any more, and the patches still look good. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-01ARM: mach-sa1100: retire custom LED codeBryan Wu1-0/+85
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-09ARM: sa11x0/pxa: convert OS timer registers to IOMEMRussell King1-1/+1
Make the OS timer registers have IOMEM like properities so they can be passed to readl_relaxed/writel_relaxed() et.al. rather than being straight volatile dereferences. Add linux/io.h includes where required. linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c, arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c from Arnd. This fixes these warnings: arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init': arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type arch/arm/mach-pxa/time.c: In function 'pxa_timer_init': arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-08ARM: sa1100: use machine specific hook for late initShawn Guo1-0/+1
Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-03-26ARM: 7342/2: sa1100: prepare for sparse irq conversionRob Herring1-1/+2
In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine and explicitly include mach/irqs.h as needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-26Merge branch 'sa11x0-mcp' into sa11x0Russell King1-0/+15
Conflicts: arch/arm/mach-sa1100/assabet.c arch/arm/mach-sa1100/collie.c arch/arm/mach-sa1100/generic.c arch/arm/mach-sa1100/lart.c arch/arm/mach-sa1100/shannon.c
2012-03-26Merge branch 'sa11x0-lcd' into sa11x0Russell King1-30/+100
Conflicts: arch/arm/mach-sa1100/assabet.c
2012-03-26Merge branch 'sa1111' into sa11x0Russell King1-14/+1
Conflicts: arch/arm/common/sa1111.c arch/arm/mach-sa1100/neponset.c Fixed: arch/arm/mach-sa1100/assabet.c for the neponset changes
2012-02-21FB: sa1100: remove global sa1100fb_.*_power function pointersRussell King1-30/+60
Now that we have platform data contained within the individual board code, we can get rid of the global function pointers, placing them inside the platform data instead. Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21FB: sa1100: move platform data to platform filesRussell King1-0/+40
Move platform data out of the sa1100fb driver into the various platform files themselves. Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-19MFD: mcp-sa11x0/assabet: move assabet reset handling out of mcp-sa11x0.cRussell King1-0/+8
Move the assabet specific reset handling out of mcp-sa11x0.c, into its board file. This leaves the mcp code free from all board specific details. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-19ARM: sa11x0: add assabet ucb1x00 platform dataRussell King1-0/+6
Add ucb1x00 platform data to enable GPIO support on the UCB1300 device. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: assabet/neponest: create neponset device in assabet.cRussell King1-0/+12
The neponset board is a daughter board for the Assabet. Create the neponset platform device in assabet.c, where we don't have to wrap it with machine_is_assabet() stuff. We also create this device dynamically rather than keeping it as a static device. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: assabet: ensure that GPIO27 is drivenRussell King1-0/+8
GPIO27 is just connected to a CPLD input without any pull-ups or pull- downs. If GPIO27 is left as an input, it will float around mid-supply, which for CMOS inputs is the worst place for a pin to be. Ensure that this pin is driven. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: assabet: avoid glitching GPIOs when setting outputsRussell King1-2/+2
Avoid glitching the GPIO signals during initialization, which can have undesirable effects. Ensure that the desired pin state is set before we change the GPIO pin direction to be an output. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: assabet: deassert QMUTE to codec while codec is unpoweredRussell King1-2/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: convert to use DEFINE_RES_xxx macrosRussell King1-9/+2
Convert StrongARM-11x0 platforms and core SoC code to use the DEFINE_RES_xxx macros. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-03MFD: mcp-sa11x0: move setup of PPC unit out of mcp-sa11x0.cRussell King1-0/+2
Patch taken from af9081ae64 (ARM: sa1100: Refactor mcp-sa11x0 to use platform resources.) by Jochen Friedrich <jochen@scram.de>, and consolidated to use a common function. Move the setup of the PPC unit out of mcp-sa11x0 into the core SA11x0 code, and call it from each platforms initialization file. This centralizes the setup of the PPC unit while not polluting the mcp-sa11x0 driver with these details. Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp ↵Russell King1-1/+0
bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
2012-01-20Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."Russell King1-11/+0
This reverts commit af9081ae64b941d32239b947882cd59ba855c5db. This revert is necessary to revert 5dd7bf59e0e8563265b3e5b33276099ef628fcc7.