summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra
AgeCommit message (Collapse)AuthorFilesLines
2022-04-06ARM: tegra: Fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds3-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-08-18ARM: tegra: paz00: Handle device properties with software node APIHeikki Krogerus1-1/+1
The old device property API is going to be removed. Replacing the device_add_properties() call with the software node API equivalent, device_create_managed_software_node(). Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210817102449.39994-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-11soc/tegra: pmc: Prevent racing with cpuilde driverDmitry Osipenko3-9/+1
Both PMC and cpuidle drivers are probed at the same init level and cpuidle depends on the PMC suspend mode. Add new default suspend mode that indicates whether PMC driver has been probed and reset the mode in a case of deferred probe of the PMC driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-01-19ARM: tegra: Don't enable unused PLLs on resume from suspendDmitry Osipenko2-24/+108
PLLC and PLLM are usually disabled on system suspend because all devices which use these PLLs are either suspended or switched away to other clock source. Don't enable unused PLLs on resume from suspend by keeping track of the enable-state of the PLLs across suspend-resume. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-06ARM: tegra: Create tegra20-cpufreq platform device on Tegra30Dmitry Osipenko1-0/+4
The tegra20-cpufreq now instantiates cpufreq-dt and Tegra30 is fully supported by that driver. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30Dmitry Osipenko1-2/+7
PLLX may be kept disabled if cpufreq driver selects some other clock for CPU. In that case PLLX will be disabled later in the resume path by the CLK driver, which also can enable PLLX if necessary by itself. Thus there is no need to enable PLLX early during resume. Tegra114/124 CLK drivers do not manage PLLX on resume and thus they are left untouched by this patch. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124Dmitry Osipenko1-5/+2
The early-resume code shall not switch CPU to PLLX because PLLX configuration could be unstable or PLLX should be simply disabled if CPU enters into suspend running off some other PLL (the case if CPUFREQ driver is active). The actual burst policy is restored by the clock drivers. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06ARM: tegra: Correct PL310 Auxiliary Control Register initializationDmitry Osipenko1-2/+2
The PL310 Auxiliary Control Register shouldn't have the "Full line of zero" optimization bit being set before L2 cache is enabled. The L2X0 driver takes care of enabling the optimization by itself. This patch fixes a noisy error message on Tegra20 and Tegra30 telling that cache optimization is erroneously enabled without enabling it for the CPU: L2C-310: enabling full line of zeros but not enabled in Cortex-A9 Cc: <stable@vger.kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06ARM: tegra: Do not fully reinitialize L2 on resumeDmitry Osipenko1-0/+4
ASUS TF300T device may not work properly if firmware is asked to fully re-initialize L2 cache after resume from LP2 suspend. The downstream kernel of TF300T uses different opcode to enable cache after resuming from LP2, this opcode also works fine on Nexus 7 and Ouya devices. Supposedly, this may be needed by an older firmware versions. Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06ARM: tegra: Initialize r0 register for firmware wake-upDmitry Osipenko1-1/+6
Downstream kernel of ASUS TF300T sets r0 to #3. There is no explanation in downstream code whether this is really needed and some of T30 downstream kernels have and explicit comment telling that all arguments are ignored by firmware. Let's take a safe side by replicating behavior of the TF300T downstream kernel. This change works fine on Ouya and Nexus 7 devices. Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13cpuidle: tegra: Squash Tegra114 driver into the common driverDmitry Osipenko5-152/+4
Tegra20/30/114/124 SoCs have common idling states, thus there is no much point in having separate drivers for a similar hardware. This patch moves Tegra114/124 arch/ drivers into the common driver without any functional changes. The CC6 state is kept disabled on Tegra114/124 because the core Tegra PM code needs some more work in order to support that state. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13cpuidle: tegra: Squash Tegra30 driver into the common driverDmitry Osipenko4-131/+1
Tegra20 and Terga30 SoCs have common C1 and CC6 idling states and thus share the same code paths, there is no point in having separate drivers for a similar hardware. This patch merely moves functionality of the old driver into the new, although the CC6 state is kept disabled for now since old driver had a rudimentary support for this state (allowing to enter into CC6 only when secondary CPUs are put offline), while new driver can provide a full-featured support. The new feature will be enabled by another patch. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidleDmitry Osipenko4-238/+2
The driver's code is refactored in a way that will make it easy to support Tegra30/114/124 SoCs by this unified driver later on. The current functionality is equal to the old Tegra20 driver, only the code's structure changed a tad. This is also a proper platform driver now. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: cpuidle: Remove unnecessary memory barrierDmitry Osipenko2-4/+0
There is no good justification for smp_rmb() after returning from LP2 because there are no memory operations that require SMP synchronization. Thus remove the confusing barrier. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: cpuidle: Make abort_flag atomicDmitry Osipenko1-4/+5
Replace memory accessors with atomic API just to make code consistent with the abort_barrier. The new variant may be even more correct now since atomic_read() will prevent compiler from generating wrong things like carrying abort_flag value in a register instead of re-fetching it from memory. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2Dmitry Osipenko1-2/+49
It is possible that something may go wrong with the secondary CPU, in that case it is much nicer to get a dump of the flow-controller state before hanging machine. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: Make outer_disable() open-codedDmitry Osipenko1-3/+8
The outer_disable() of Tegra's suspend code is open-coded now since that helper produces spurious warning message about secondary CPUs being online when CPU enters into LP2 from cpuidle. The secondaries are actually halted by the cpuidle driver on entering into LP2 idle-state, but the online status is not touched by the cpuidle. This fixes a storm of warnings once LP2 idling state is enabled on Tegra30. The outer_disable() helper has sanity checks for interrupts and secondary CPUs being disabled and we are pretty confident about the interrupts state during of CPU idling / system suspend. The rail-off status check is added in this patch as equivalent for the "num_online_cpus() > 1". Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: Rename some of the newly exposed PM functionsDmitry Osipenko5-18/+18
Rename some of the recently exposed PM functions, prefixing them with "tegra_pm_" in order to make the naming of the PM functions consistent. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: Expose PM functions required for new cpuidle driverDmitry Osipenko8-26/+8
The upcoming unified CPUIDLE driver will be added to the drivers/cpuidle/ directory and it will require all these exposed Tegra PM-core functions. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: fixup missing include rename] Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12ARM: tegra: Propagate error from tegra_idle_lp2_last()Dmitry Osipenko4-8/+12
Technically cpu_suspend() may fail and it's never good to lose information about failure. For example things like cpuidle core could correctly sample idling time in the case of failure. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12ARM: tegra: Change tegra_set_cpu_in_lp2() type to voidDmitry Osipenko3-18/+6
The Tegra30 CPUIDLE driver has intention to check whether primary CPU was the last CPU that entered LP2 (CC6) idle-state, but that functionality never got utilized because driver never supported the CC6 state for the case where any secondary CPU is online. The new cpuidle driver will properly support CC6 on Tegra30, including the case where secondary CPUs are online, and that knowledge about what CPUs entered into CC6 won't be needed at all because new driver will use different approach by making use of the coupled idle-state and explicitly parking secondary CPUs before entering into CC6. Thus this patch is just a minor cleanup change. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12ARM: tegra: Remove pen-locking from cpuidle-tegra20Dmitry Osipenko7-251/+4
Pen-locking is meant to block CPU0 if CPU1 wakes up during of entering into LP2 because of some interrupt firing up, preventing unnecessary LP2 enter that will be resumed immediately. Apparently this case doesn't happen often in practice, I checked how often it takes place and found that after ~20 hours of browsing web, managing email, watching videos and idling (15+ hours) there is only a dozen of early LP2 entering abortions and they all happened while device was idling. Thus let's remove the pen-locking and make LP2 entering uninterruptible, simplifying code quite a lot. This will also become very handy for the upcoming unified cpuidle driver, allowing to have a common LP2 code-path across of different hardware generations. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12ARM: tegra: Add tegra_pm_park_secondary_cpu()Dmitry Osipenko2-0/+19
This function resembles tegra_cpu_die() of the hotplug code, but this variant is more suitable to be used for CPU PM because it's made specifically to be used by cpu_suspend(). In short this function puts secondary CPU offline, it will be used by the new CPUIDLE driver. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12ARM: tegra: Compile sleep-tegra20/30.S unconditionallyDmitry Osipenko2-6/+2
The sleep-tegra*.S provides functionality required for suspend/resume and CPU hotplugging. The new unified CPUIDLE driver will support multiple hardware generations starting from Terga20 and ending with Tegra124, the driver will utilize functions that are provided by the assembly and thus it is cleaner to compile that code without any build-dependencies in order to avoid churning with #ifdef's. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-08ARM: tegra: Use clk_m CPU on Tegra124 LP1 resumeStephen Warren1-2/+6
Configure the clock controller to set an alternate clock for the CPU when it receives an IRQ during LP1 (system suspend). Specifically, use clk_m (the crystal) rather than clk_s (a 32KHz clock). Such an IRQ will be the LP1 wake event. This reduces the amount of time taken to resume from LP1. NVIDIA's downstream kernel executes this code on both Tegra30 and Tegra124, so it appears OK to make this change unconditionally. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-08ARM: tegra: Modify reshift divider during LP1Stephen Warren1-0/+11
The reshift hardware module implements the RAM re-repair process. This module uses PLLP as an input clock during LP1 resume. The input divider for this clock is typically set for PLLP's normal rate. During LP1 resume, PLLP is bypassed and so runs at the crystal rate, which is much slower. Consequently, decrease the divider so that the reshift module runs at a reasonable rate during LP1 resume. NVIDIA's downstream kernel code only does this if not compiled for Tegra30, so the added code is made conditional upon the chip ID. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-08ARM: tegra: Enable PLLP bypass during Tegra124 LP1Stephen Warren1-0/+11
For a little over a year, U-Boot has configured the flow controller to perform automatic RAM re-repair on off->on power transitions of the CPU rail[1]. This is mandatory for correct operation of Tegra124. However, RAM re-repair relies on certain clocks, which the kernel must enable and leave running. PLLP is one of those clocks. This clock is shut down during LP1 in order to save power. Enable bypass (which I believe routes osc_div_clk, essentially the crystal clock, to the PLL output) so that this clock signal toggles even though the PLL is not active. This is required so that LP1 power mode (system suspend) operates correctly. The bypass configuration must then be undone when resuming from LP1, so that all peripheral clocks run at the expected rate. Without this, many peripherals won't work correctly; for example, the UART baud rate would be incorrect. NVIDIA's downstream kernel code only does this if not compiled for Tegra30, so the added code is made conditional upon the chip ID. NVIDIA's downstream code makes this change conditional upon the active CPU cluster. The upstream kernel currently doesn't support cluster switching, so this patch doesn't test the active CPU cluster ID. [1] 3cc7942a4ae5 ARM: tegra: implement RAM repair Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-12-05Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-4/+6
Pull ARM SoC platform updates from Olof Johansson: "Most of these are for MMP (seeing a bunch of cleanups and refactorings for the first time in a while), and for OMAP (a bunch of cleanups and added support for voltage controller on OMAP4430)" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() OMAP2: fixup doc comments in omap_device ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1 ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED ARM: imx: use generic function to exit coherency ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS ARM: s3c: Rename s5p_usb_phy functions ARM: s3c: Rename s3c64xx_spi_setname() function ARM: imx: Add serial number support for i.MX6/7 SoCs ARM: imx: Drop imx_anatop_usb_chrg_detect_disable() arm64: Introduce config for S32 ARM: hisi: drop useless depend on ARCH_MULTI_V7 arm64: realtek: Select reset controller ARM: shmobile: rcar-gen2: Drop legacy DT clock support ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize") MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support ...
2019-11-19cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirksRafael J. Wysocki1-1/+1
Commit 99e98d3fb100 ("cpuidle: Consolidate disabled state checks") overlooked the fact that the imx6q and tegra20 cpuidle drivers use the "disabled" field in struct cpuidle_state for quirks which trigger after the initialization of cpuidle, so reading the initial value of that field is not sufficient for those drivers. In order to allow them to implement the quirks without using the "disabled" field in struct cpuidle_state, introduce a new helper function and modify them to use it. Fixes: 99e98d3fb100 ("cpuidle: Consolidate disabled state checks") Reported-by: Len Brown <lenb@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-29ARM: tegra: Use WFE for power-gating on Tegra30Dmitry Osipenko1-1/+3
Turned out that WFI doesn't work reliably on Tegra30 as a trigger for the power-gating, it causes CPU hang under some circumstances like having memory controller running of PLLP. The TRM doc states that WFI should be used for the Big-Little "Cluster Switch", while WFE for the power-gating. Hence let's use the WFE for CPU0 power-gating, like it is done for the power-gating of a secondary cores. This fixes CPU hang after entering LP2 with memory running off PLLP. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-29ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()Dmitry Osipenko1-3/+3
There is an unfortunate typo in the code that results in writing to FLOW_CTLR_HALT instead of FLOW_CTLR_CSR. Cc: <stable@vger.kernel.org> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-08-10ARM: tegra: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable': arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=] tegra_cpu_reset_handler_set(reset_address); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-tegra/reset.c:74:2: note: here case 0: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2-8/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner8-80/+8
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner13-156/+13
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner3-30/+3
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner1-14/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds5-47/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds9-22/+121
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-15treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>Masahiro Yamada2-2/+2
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29Merge tag 'tegra-for-5.2-arm-soc' of ↵Olof Johansson3-17/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers ARM: tegra: Core changes for v5.2-rc1 One of these patches enables PM by default on 32-bit ARM, following the same default that we already have on 64-bit ARM. The other patch fixes a cosmetic issue in the cpuidle driver for Tegra20 and Tegra30. * tag 'tegra-for-5.2-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 ARM: tegra: enforce PM requirement Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-18Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"Dmitry Osipenko2-30/+0
Turned out that the actual bug was in the Memory Controller driver that programmed shadowed registers without latching the new values and then there was a bug on EMEM arbitration configuration calculation that results in a wrong value being latched on resume from suspend. The Memory Controller has been fixed properly now, hence the workaround patch could be reverted safely. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-18ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30Dmitry Osipenko2-17/+3
Tegra20/30 drivers do not handle the tick_broadcast_enter() error which potentially could happen when CPU timer isn't permitted to be stopped. Let's just move out the broadcasting to the CPUIDLE core by setting the respective flag in the Tegra20/30 drivers. This patch doesn't fix any problem because currently tick_broadcast_enter() could fail only on ARM64, so consider this change as a minor cleanup. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17firmware: Move Trusted Foundations supportThierry Reding5-5/+8
Move the Trusted Foundations support out of arch/arm/firmware and into drivers/firmware where most other firmware support implementations are located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-10ARM: tegra: Sort dependencies alphabeticallyThierry Reding1-1/+1
The list of dependencies has become unsorted, which makes it difficult to find the right place to insert new dependencies. Restore alphabetical order to make future additions easier. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-09ARM: tegra: Add firmware calls required for suspend-resume on Tegra30Dmitry Osipenko3-5/+84
In order to suspend-resume CPU with Trusted Foundations firmware being present on Tegra30, the LP1/LP2 boot vectors and CPU caches need to be set up using the firmware calls and then suspend code shall avoid re-disabling parts that were disabled by the firmware. Tested-by: Robert Yang <decatf@gmail.com> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-09ARM: tegra: Always boot CPU in ARM-modeDmitry Osipenko1-0/+1
CPU always jumps into reset handler in ARM-mode from the Trusted Foundations firmware, hence let's make CPU to always jump into kernel in ARM-mode regardless of the firmware presence. This is required to make Thumb-2 kernel working with the Trusted Foundations firmware on Tegra30. Tested-by: Robert Yang <decatf@gmail.com> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>