summaryrefslogtreecommitdiff
path: root/arch/arm/plat-versatile
AgeCommit message (Collapse)AuthorFilesLines
2014-11-28ARM: vexpress: Remove non-DT codePawel Moll1-1/+1
Now, with the CLCD DT support available, there is no more reason to keep the non-DT support for V2P-CA9. Removed, together with "some" supporting code. It was necessary to make PLAT_VERSATILE_SCHED_CLOCK optional and selected by the machines still interested in it. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-27video: move Versatile CLCD helpersLinus Walleij4-195/+0
This moves the Versatile-specific helper code and panel database down into the drivers/video folder next to the CLCD driver itself, preserving the config symbol but also moving the header to platform data. This is necessary to rid the Integrator of this final <plat/*> inclusion dependency and get us one less user of the plat-versatile folder. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: linux-fbdev@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-28ARM/leds: move ARM Versatile LED driver to leds subsystemLinus Walleij3-117/+0
Now that we have converted this driver to a real platform device module-based thing, we move the driver down into the LEDs subsystem and rename the config option to LEDS_VERSATILE. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-27ARM: plat-versatile: convert LEDs to platform deviceLinus Walleij1-21/+28
The LEDs were initialized unconditionally with an fs_initcall() which doesn't play well with multiplatform. Convert the driver to a platform device and convert all boards with these LEDs to register a platform device and pass the register as a resource instead. Tested successfully on the Versatile/AB and RealView PB1176. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: plat-versatile: LEDs initialise to off stateRussell King1-2/+2
There really is no excuse to turn on all 8 LEDs at boot time, such that on the Versatile PB/926 we end up with 6 LEDs on continuously and forever. We're not a christmas decoration! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-24Merge tag 'soc-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2013-12-12ARM: clean up cache handling in platform codeNicolas Pitre1-2/+1
We have a handy macro to replace open coded __cpuc_flush_dcache_area(() and outer_clean_range() sequences. Let's use it. No functional change. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-06Merge branch 'soc/sched_clock' into next/socKevin Hilman1-2/+2
From Stephen Boyd: * soc/sched_clock: ARM: versatile: Switch to sched_clock_register() ARM: orion: Switch to sched_clock_register() ARM: OMAP: Switch to sched_clock_register() ARM: iop: Switch to sched_clock_register() ARM: u300: Switch to sched_clock_register() ARM: sa1100: Switch to sched_clock_register() ARM: pxa: Switch to sched_clock_register() ARM: OMAP2+: Switch to sched_clock_register() ARM: OMAP1: Switch to sched_clock_register() ARM: msm: Switch to sched_clock_register() ARM: mmp: Switch to sched_clock_register() ARM: IXP4xx: Switch to sched_clock_register() ARM: integrator: Switch to sched_clock_register() ARM: imx: Switch to sched_clock_register() ARM: davinci: Switch to sched_clock_register() ARM: clps711x: Switch to sched_clock_register() ARM: timer-sp: Switch to sched_clock_register() Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-22ARM: versatile: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-19ARM: vexpress: add big endian supportBen Dooks1-0/+2
Add support for the versatile express systems to boot big-endian. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-07-15arm: delete __cpuinit/__CPUINIT usage from all ARM usersPaul Gortmaker1-3/+3
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-07Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
2013-06-24ARM: 7766/1: versatile: don't mark pen as __INITMark Rutland1-2/+0
When booting fewer cores than are physically present on a versatile platform (e.g. when passing maxcpus=N on the command line), some secondary cores may remain in the holding pen, which is marked __INIT, as each CPU's gic cpumask is initialised to 0xff, and thus an IPI to any CPU will wake up *all* secondaries. This behaviour is crucial to the GIC cpumask self-discovery. Late in the boot process, the memory comprising the holding pen will be released to the kernel for more general use, and may be overwritten with arbitrary data, which can cause the held secondaries to start behaving unpredictably. This can lead to all manner of odd behaviour from the kernel. As preventing cpus from entering the pen would require invasive changes to the GIC driver and to existing dts used in the wild, we instead remove the __INIT marker from the pen, keeping it around and leaving the unused secondary CPUs dormant. Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-June/175039.html Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-13sched_clock: Make ARM's sched_clock generic for all architecturesStephen Boyd1-1/+1
Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-03-26irqchip: gic: Perform the gic_secondary_init() call via CPU notifierCatalin Marinas1-8/+0
All the calls to gic_secondary_init() pass 0 as the first argument. Since this function is called on each CPU when starting, it can be done in a platform-independent way via a CPU notifier registered by the GIC code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Barry Song <baohua.song@csr.com>
2013-01-28Merge tag 'v3.8-rc5' into next/cleanupOlof Johansson1-1/+1
Linux 3.8-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-24ARM: vexpress: extend the MPIDR range used for pen release checkLorenzo Pieralisi1-1/+1
In ARM multi-cluster systems the MPIDR affinity level 0 cannot be used as a single cpu identifier, affinity levels 1 and 2 must be taken into account as well. This patch extends the MPIDR usage to affinity levels 1 and 2 in versatile secondary cores start up code in order to compare the passed pen_release value with the full-blown affinity mask. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-12irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.hRob Herring1-1/+1
Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10ARM: GIC: remove direct use of gic_raise_softirqRob Herring1-1/+1
In preparation of moving gic code to drivers/irqchip, remove the direct platform dependencies on gic_raise_softirq. Move the setup of smp_cross_call into the gic code and use arch_send_wakeup_ipi_mask function to trigger wake-up IPIs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-12-13Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds4-233/+0
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-11-26ARM: Fix Kconfig symbols typo for LEDSAlexander Shiyan1-1/+1
Correct option should be LEDS_TRIGGERS, not LEDS_TRIGGER. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-04ARM: plat-versatile: move FPGA irq driver to drivers/irqchipLinus Walleij4-227/+0
This moves the Versatile FPGA interrupt controller driver, used in the Integrator/AP, Integrator/CP and some Versatile boards, out of arch/arm/plat-versatile and down to drivers/irqchip where we have consensus that such drivers belong. The header file is consequently moved to <linux/platform_data/irq-versatile-fpga.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-27ARM: plat-versatile: use simple irqdomain for FPGA IRQLinus Walleij1-28/+22
This switches the FPGA IRQ driver over to using the simple IRQ domain. We can then use the same codepath for this in the DT and non-DT cases. To be able to use quicker irq_find_mapping() in the handlers we first call irq_create_mapping() on all the valid HW IRQ numbers so that descriptors will be created for them in the DT case where a linear domain will be the outcome of the call. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-07Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-10/+64
Pull ARM updates from Russell King: "This is the first chunk of ARM updates for this merge window. Conflicts are expected in two files - asm/timex.h and mach-integrator/integrator_cp.c. Nothing particularly stands out more than anything else. Most of the growth is down to the opcodes stuff from Dave Martin, which is countered by Rob's patches to use more of the asm-generic headers on ARM." (A few more conflicts grew since then, but it all looked fairly trivial) * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits) ARM: 7548/1: include linux/sched.h in syscall.h ARM: 7541/1: Add ARM ERRATA 775420 workaround ARM: ensure vm_struct has its phys_addr member filled in ARM: 7540/1: kexec: Check segment memory addresses ARM: 7539/1: kexec: scan for dtb magic in segments ARM: 7538/1: delay: add registration mechanism for delay timer sources ARM: 7536/1: smp: Formalize an IPI for wakeup ARM: 7525/1: ptrace: use updated syscall number for syscall auditing ARM: 7524/1: support syscall tracing ARM: 7519/1: integrator: convert platform devices to Device Tree ARM: 7518/1: integrator: convert AMBA devices to device tree ARM: 7517/1: integrator: initial device tree support ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ ARM: 7515/1: integrator: check PL010 base address from resource ARM: 7514/1: integrator: call common init function from machine ARM: 7522/1: arch_timers: register a time/cycle counter ARM: 7523/1: arch_timers: enable the use of the virtual timer ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental ARM: 7520/1: Build dtb files in all target ARM: Fix build warning in arch/arm/mm/alignment.c ...
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds3-8/+18
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-09-22Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson2-8/+16
* multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-18ARM: 7516/1: plat-versatile: add DT support to FPGA IRQLinus Walleij2-10/+64
This adds Device Tree probing support to the Versatile FPGA IRQ controller. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-14ARM: vexpress: convert to multi-platformRob Herring1-0/+2
Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-14ARM: consolidate pen_release instead of having per platform definitionsMarc Zyngier1-6/+0
Almost each SMP platform defines pen_release to manage booting secondary CPUs. This of course clashes with the single zImage effort. Add the pen_release definition to the ARM SMP code, and remove all others. This should only be used by platforms which lack any kind of CPU power management... Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-13ARM: SoC: convert VExpress/RealView to SMP operationsMarc Zyngier2-2/+16
Convert both Realview and VExpress to use struct smp_operations to provide their SMP and CPU hotplug operation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13Merge branch 'for-arm-soc' of ↵Arnd Bergmann2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers From Bryan Wu <bryan.wu@canonical.com>: Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a new generic led trigger for CPU not only for ARM but also for others. For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to trigger idle start or idle end event. These patches convert old style LED driver in arch/arm to gpio_led or new led driver interface. Against 3.5 release and build successfully for all the machines. Test ledtrig-cpu driver on OMAP4 Panda board. v9 --> v10 * fix compiling issue on versatile_defconfig reported by Russell King * rebase to 3.5 kernel and move patches to new git tree v8 --> v9: * use mutex to replace rw_sema pointed out by Tim Gardner * add a new struct led_trigger_cpu * add lock_is_inited to record mutex lock initialization v6 --> v7: * add a patch to unify the led-trigger name * fix some typo pointed * use BUG_ON to detect CPU numbers during building stage v5 --> v6: * replace __get_cpu_var() to per_cpu() * remove smp_processor_id() which is wrong with for_each_possible_cpu() * test on real OMAP4 Panda board * add comments about CPU hotplug in the CPU LED trigger driver v4 --> v5: * rebase all the patches on top of latest linux-next * replace on_each_cpu() with for_each_possible_cpu() * add some description of ledtrig_cpu() API * remove old leds code from driver nwflash.c, which should use a new led trigger then * this trigger driver can be built as module now v3 --> v4: * fix a typo pointed by Jochen Friedrich * fix some building errors * add Reviewed-by and Tested-by into patch log v2 --> v3: * almost rewrote the whole ledtrig-cpu driver, which is more simple * every CPU will have a per-CPU trigger * cpu trigger can be assigned to any leds * fix a lockdep issue in led-trigger common code * other fix according to review v1 --> v2: * remove select operations in Kconfig of every machines * add back supporting of led in core module of mach-integrator * solidate name scheme in ledtrig-cpu.c * add comments of CPU_LED_* cpu led events * fold patches of RealView and Versatile together * add machine_is_ check during assabet led driver init * add some Acked-by in patch logs * remove code for simpad machine in machine-sa11000, since Jochen Friedrich introduced gpiolib and gpio-led driver for simpad * on Assabet and Netwinder machine, LED operations is reversed like: setting bit means turn off leds clearing bit means turn on leds * add a new function to read CM_CTRL register for led driver * 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: ARM: use new LEDS CPU trigger stub to replace old one ARM: mach-sa1100: retire custom LED code ARM: mach-omap1: retire custom LED code ARM: mach-pnx4008: remove including old leds event API header file ARM: plat-samsung: remove including old leds event API header file ARM: mach-pxa: retire custom LED code char: nwflash: remove old led event code ARM: mach-footbridge: retire custom LED code ARM: mach-ebsa110: retire custom LED code ARM: mach-clps711x: retire custom LED code of P720T machine ARM: mach-integrator: retire custom LED code ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger ARM: mach-shark: retire custom LED code ARM: mach-ks8695: remove leds driver, since nobody use it ARM: mach-realview and mach-versatile: retire custom LED code ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers led-triggers: create a trigger for CPU activity Conflicts: arch/arm/mach-clps711x/p720t.c arch/arm/mach-sa1100/leds-cerf.c arch/arm/mach-sa1100/leds-lart.c Let's hope this is the last time we pull this and it doesn't cause more trouble. I have verified that version 10 causes no build warnings or errors any more, and the patches still look good. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-01ARM: mach-realview and mach-versatile: retire custom LED codeBryan Wu2-5/+7
This replaces the custom LED trigger code in mach-realview with some overarching platform code for the plat-versatile family that will lock down LEDs 2 thru 5 for CPU activity indication. The day we have 8 core ARM systems the plat-versatile code will have to become more elaborate. Tested on RealView PB11MPCore by invoking four different CPU hogs (yes > /dev/null&) and see the LEDs go on one at a time. They all go off as the hogs are killed. Tested on the PB1176 as well - just one activity led (led 2) goes on and off with CPU activity. (bryan.wu@canonical.com: use ledtrig-cpu instead of ledtrig-arm-cpu) Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-07-28Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-1/+1
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-12ARM: versatile: Make plat-versatile clock optionalPawel Moll2-1/+4
... in preparation for common clock coming for Integrator and Versatile Express. Based on Linus Walleij's "ARM: integrator: convert to common clock" patch. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-09ARM: Realview: use SGI0 to wake secondary CPUsRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-04ARM: 7389/2: plat-versatile: modernize FPGA IRQ controllerLinus Walleij3-21/+112
This does two things to the FPGA IRQ controller in the versatile family: - Convert to MULTI_IRQ_HANDLER so we can drop the entry macro from the Integrator. The C IRQ handler was inspired from arch/arm/common/vic.c, recent bug discovered in this handler was accounted for. - Convert to using IRQ domains so we can get rid of the NO_IRQ mess and proceed with device tree and such stuff. As part of the exercise, bump all the low IRQ numbers on the Integrator PIC to start from 1 rather than 0, since IRQ 0 is now NO_IRQ. The Linux IRQ numbers are thus entirely decoupled from the hardware IRQ numbers in this controller. I was unable to split this patch. The main reason is the half-done conversion to device tree in Versatile. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-30Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-2/+1
Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...
2012-03-27Merge branch 'devel-stable' into for-linusRussell King1-1/+0
Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-24ARM: 7310/1: integrator: implement sched_clock across all boardsLinus Walleij1-1/+1
Now that we can select a sched_clock at runtime, let's implement it for the Integrator AP, default-select the one found in all other board it for all plat-versatile boards and make the right clock kick in at runtime. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-13ARM: plat-versatile: convert to twd_local_timer_register() interfaceMarc Zyngier2-54/+0
Add support for the new smp_twd runtime registration interface to the RealView/VE platforms, and remove the old compile-time support. Tested on EB11MP. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-23ARM: versatile: Map local timers using Device Tree when possiblePawel Moll1-0/+26
Try to map TWD registers basing on a "arm,*-twd-timer" Device Tree node. This overrides existing twd_base value. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-03ARM: Make the sched_clock framework mandatoryMarc Zyngier1-1/+0
All sched_clock() providers have been converted to the sched_clock framework, which also provides a jiffy based implementation for the platforms that do not provide a counter. It is now possible to make the sched_clock framework mandatory, effectively preventing new platforms to add new sched_clock() functions, which would be detrimental to the single zImage work. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-23ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMPWill Deacon1-0/+1
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai <hamo.by@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-17Merge branch 'fixes-for-arm-soc' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson1-0/+1
into fixes * 'fixes-for-arm-soc' of git://sources.calxeda.com/kernel/linux: ARM: make BSYM macro assembly only ARM: highbank: remove incorrect BSYM usage ARM: imx: remove incorrect BSYM usage ARM: exynos: remove incorrect BSYM usage ARM: ux500: add missing ENDPROC to headsmp.S ARM: msm: Add missing ENDPROC to headsmp.S ARM: versatile: Add missing ENDPROC to headsmp.S
2012-01-16ARM: versatile: Add missing ENDPROC to headsmp.SPawel Moll1-0/+1
Once the ENDPROC is in place, BSYM() in not longer necessary to get correct pointer to versatile_secondary_startup(). Tested-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Dave Martin <dave.martin@linaro.org>
2011-12-19ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtimeMarc Zyngier1-23/+6
sched_clock() is yet another blocker on the road to the single image. This patch implements an idea by Russell King: http://www.spinics.net/lists/linux-omap/msg49561.html Instead of asking the platform to implement both sched_clock() itself and the rollover callback, simply register a read() function, and let the ARM code care about sched_clock() itself, the conversion to ns and the rollover. sched_clock() uses this read() function as an indirection to the platform code. If the platform doesn't provide a read(), the code falls back to the jiffy counter (just like the default sched_clock). This allow some simplifications and possibly some footprint gain when multiple platforms are compiled in. Among the drawbacks, the removal of the *_fixed_sched_clock optimization which could negatively impact some platforms (sa1100, tegra, versatile and omap). Tested on 11MPCore, OMAP4 and Tegra. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Tested-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: versatile: convert logical CPU numbers to physical numbersWill Deacon1-1/+1
This patch uses the new cpu_logical_map() macro for converting logical CPU numbers into physical numbers when dealing with the pen_release variable in the SMP boot and CPU hotplug paths. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-05-23ARM: consolidate SMP cross call implementationRussell King1-1/+2
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner1-2/+2
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner1-6/+6
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>