summaryrefslogtreecommitdiff
path: root/arch/arm/xen/mm.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-01swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocatedPetr Tesarik1-6/+4
If swiotlb is allocated, immediately return 0, so callers do not have to check io_tlb_default_mem.nslabs explicitly. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-11swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on armChristoph Hellwig1-14/+0
swiotlb-xen uses very different ways to allocate coherent memory on x86 vs arm. On the former it allocates memory from the page allocator, while on the later it reuses the dma-direct allocator the handles the complexities of non-coherent DMA on arm platforms. Unfortunately the complexities of trying to deal with the two cases in the swiotlb-xen.c code lead to a bug in the handling of DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING flag the coherent memory allocator does not actually allocate coherent memory, but just a DMA handle for some memory that is DMA addressable by the device, but which does not have to have a kernel mapping. Thus dereferencing the return value will lead to kernel crashed and memory corruption. Fix this by using the dma-direct allocator directly for arm, which works perfectly fine because on arm swiotlb-xen is only used when the domain is 1:1 mapped, and then simplifying the remaining code to only cater for the x86 case with DMA coherent device. Reported-by: Rahul Singh <Rahul.Singh@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rahul Singh <rahul.singh@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Rahul Singh <rahul.singh@arm.com>
2022-04-18swiotlb: merge swiotlb-xen initialization into swiotlbChristoph Hellwig1-10/+11
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64 this works trivially, while for x86 xen_swiotlb_fixup needs to be passed as the remap argument to swiotlb_init_remap/swiotlb_init_late. Note that the lower bound of the swiotlb size is changed to the smaller IO_TLB_MIN_SLABS based value with this patch, but that is fine as the 2MB value used in Xen before was just an optimization and is not the hard lower bound. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-18arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_regionStefano Stabellini1-4/+1
It used to be that Linux enabled swiotlb-xen when running a dom0 on ARM. Since f5079a9a2a31 "xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mapped", Linux detects whether to enable or disable swiotlb-xen based on the new feature flags: XENFEAT_direct_mapped and XENFEAT_not_direct_mapped. However, there is still a leftover xen_initial_domain() check in xen_create_contiguous_region. Remove the check as xen_create_contiguous_region is only called by swiotlb-xen during initialization. If xen_create_contiguous_region is called, we know Linux is running 1:1 mapped so there is no need for additional checks. Also update the in-code comment. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-05-14xen/swiotlb: check if the swiotlb has already been initializedStefano Stabellini1-1/+7
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with -ENOMEM if the swiotlb has already been initialized. Add an explicit check io_tlb_default_mem != NULL at the beginning of xen_swiotlb_init. If the swiotlb is already initialized print a warning and return -EEXIST. On x86, the error propagates. On ARM, we don't actually need a special swiotlb buffer (yet), any buffer would do. So ignore the error and continue. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210512201823.1963-3-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-14xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.hStefano Stabellini1-12/+0
Move xen_swiotlb_detect to a static inline function to make it available to !CONFIG_XEN builds. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-04Merge branch 'stable/for-linus-5.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Christoph Hellwig has taken a cleaver and trimmed off the not-needed code and nicely folded duplicate code in the generic framework. This lays the groundwork for more work to add extra DMA-backend-ish in the future. Along with that some bug-fixes to make this a nice working package" * 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't override user specified size in swiotlb_adjust_size swiotlb: Fix the type of index swiotlb: Make SWIOTLB_NO_FORCE perform no allocation ARM: Qualify enabling of swiotlb_init() swiotlb: remove swiotlb_nr_tbl swiotlb: dynamically allocate io_tlb_default_mem swiotlb: move global variables into a new io_tlb_mem structure xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup xen-swiotlb: split xen_swiotlb_init swiotlb: lift the double initialization protection from xen-swiotlb xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs xen-swiotlb: remove xen_set_nslabs xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer swiotlb: split swiotlb_tbl_sync_single swiotlb: move orig addr and size validation into swiotlb_bounce swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single powerpc/svm: stop using io_tlb_start
2021-04-23xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mappedStefano Stabellini1-1/+13
Newer Xen versions expose two Xen feature flags to tell us if the domain is directly mapped or not. Only when a domain is directly mapped it makes sense to enable swiotlb-xen on ARM. Introduce a function on ARM to check the new Xen feature flags and also to deal with the legacy case. Call the function xen_swiotlb_detect. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-17xen-swiotlb: split xen_swiotlb_initChristoph Hellwig1-1/+1
Split xen_swiotlb_init into a normal an an early case. That makes both much simpler and more readable, and also allows marking the early code as __init and x86-only. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2020-10-16Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+1
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-14arch, drivers: replace for_each_membock() with for_each_mem_range()Mike Rapoport1-3/+4
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-06dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>Christoph Hellwig1-1/+1
Move more nitty gritty DMA implementation details into the common internal header. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-08-04xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maintStefano Stabellini1-6/+9
dma_cache_maint is getting called passing a dma address which could be different from a physical address. Add a struct device* parameter to dma_cache_maint. Translate the dma_addr_t parameter of dma_cache_maint by calling dma_to_phys. Do it for the first page and all the following pages, in case of multipage handling. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-11-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04xen/arm: introduce phys/dma translations in xen_dma_sync_for_*Stefano Stabellini1-11/+6
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys. Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there. dma_cache_maint is fixed by the next patch. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-10-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_deviceStefano Stabellini1-2/+3
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-6-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpuStefano Stabellini1-2/+3
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-5-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-6/+6
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-07xen: mm: make xen_mm_init staticBen Dooks (Codethink)1-1/+1
The xen_mm_init is not exported or used outside of the file it is declared in, so make it static. This fixes the following sparse warning: arch/arm/xen/mm.c:136:12: warning: symbol 'xen_mm_init' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-07xen: mm: include <xen/xen-ops.h> for missing declarationsBen Dooks (Codethink)1-0/+1
Include <xen/xen-ops.h> for xen_{create,destroy}_contigous_region call declarations. Fixes the following sparse warnings: arch/arm/xen/mm.c:119:5: warning: symbol 'xen_create_contiguous_region' was not declared. Should it be static? arch/arm/xen/mm.c:131:6: warning: symbol 'xen_destroy_contiguous_region' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-02arm: xen: mm: use __GPF_DMA32 for arm64Peng Fan1-1/+4
arm64 shares some code under arch/arm/xen, including mm.c. However ZONE_DMA is removed by commit ad67f5a6545("arm64: replace ZONE_DMA with ZONE_DMA32"). So add a check if CONFIG_ZONE_DMA32 is enabled use __GFP_DMA32. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11swiotlb-xen: simplify cache maintainanceChristoph Hellwig1-47/+17
Now that we know we always have the dma-noncoherent.h helpers available if we are on an architecture with support for non-coherent devices, we can just call them directly, and remove the calls to the dma-direct routines, including the fact that we call the dma_direct_map_page routines but ignore the value returned from it. Instead we now have Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call the special Xen versions of those routines for foreign pages. Note that the new helpers get the physical address passed in addition to the dma address to avoid another translation for the local cache maintainance. The pfn_valid checks remain on the dma address as in the old code, even if that looks a little funny. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-09-11xen: remove the exports for xen_{create,destroy}_contiguous_regionChristoph Hellwig1-2/+0
These routines are only used by swiotlb-xen, which cannot be modular. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: remove xen_dma_opsChristoph Hellwig1-4/+0
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no need for a pointer indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: simplify dma_cache_maintChristoph Hellwig1-40/+21
Calculate the required operation in the caller, and pass it directly instead of recalculating it for each page, and use simple arithmetics to get from the physical address to Xen page size aligned chunks. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: use dev_is_dma_coherentChristoph Hellwig1-6/+6
Use the dma-noncoherent dev_is_dma_coherent helper instead of the home grown variant. Note that both are always initialized to the same value in arch_setup_dma_ops. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-29arch/arm/xen: Remove duplicate headerSouptick Joarder1-1/+0
Remove duplicate header which is included twice. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+0
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-20xen-swiotlb: consolidate xen_swiotlb_dma_opsChristoph Hellwig1-17/+0
ARM and x86 had duplicated versions of the dma_ops structure, the only difference is that x86 hasn't wired up the set_dma_mask, mmap, and get_sgtable ops yet. On x86 all of them are identical to the generic version, so they aren't needed but harmless. All the symbols used only for xen_swiotlb_dma_ops can now be marked static as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-03-07Merge branch 'stable/for-linus-4.11' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Two tiny implementations of the DMA API for callback in ARM (for Xen)" * 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: implement xen_swiotlb_get_sgtable callback swiotlb-xen: implement xen_swiotlb_dma_mmap callback
2017-02-13swiotlb-xen: implement xen_swiotlb_get_sgtable callbackAndrii Anisov1-0/+1
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2017-02-13swiotlb-xen: implement xen_swiotlb_dma_mmap callbackStefano Stabellini1-0/+1
This function creates userspace mapping for the DMA-coherent memory. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com> Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-2/+2
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-07swiotlb-xen: Enforce return of DMA_ERROR_CODE in mapping functionAlexander Duyck1-1/+0
The mapping function should always return DMA_ERROR_CODE when a mapping has failed as this is what the DMA API expects when a DMA error has occurred. The current function for mapping a page in Xen was returning either DMA_ERROR_CODE or 0 depending on where it failed. On x86 DMA_ERROR_CODE is 0, but on other architectures such as ARM it is ~0. We need to make sure we return the same error value if either the mapping failed or the device is not capable of accessing the mapping. If we are returning DMA_ERROR_CODE as our error value we can drop the function for checking the error code as the default is to compare the return value against DMA_ERROR_CODE if no function is defined. Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski1-4/+4
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman1-1/+1
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-23xen/swiotlb: Add support for 64KB page granularityJulien Grall1-11/+27
Swiotlb is used on ARM64 to support DMA on platform where devices are not protected by an SMMU. Furthermore it's only enabled for DOM0. While Xen is always using 4KB page granularity in the stage-2 page table, Linux ARM64 may either use 4KB or 64KB. This means that a Linux page can be spanned accross multiple Xen page. The Swiotlb code has to validate that the buffer used for DMA is physically contiguous in the memory. As a Linux page can't be shared between local memory and foreign page by design (the balloon code always removing entirely a Linux page), the changes in the code are very minimal because we only need to check the first Xen PFN. Note that it may be possible to optimize the function check_page_physically_contiguous to avoid looping over every Xen PFN for local memory. Although I will let this optimization for a follow-up. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlbJulien Grall1-2/+5
With 64KB page granularity support, the frame number will be different. It will be easier to modify the behavior in a single place rather than in each caller. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Make clear that swiotlb and biomerge are dealing with DMA addressJulien Grall1-2/+2
The swiotlb is required when programming a DMA address on ARM when a device is not protected by an IOMMU. In this case, the DMA address should always be equal to the machine address. For DOM0 memory, Xen ensure it by have an identity mapping between the guest address and host address. However, when mapping a foreign grant reference, the 1:1 model doesn't work. For ARM guest, most of the callers of pfn_to_mfn expects to get a GFN (Guest Frame Number), i.e a PFN (Page Frame Number) from the Linux point of view given that all ARM guest are auto-translated. Even though the name pfn_to_mfn is misleading, we need to ensure that those caller get a GFN and not by mistake a MFN. In pratical, I haven't seen error related to this but we should fix it for the sake of correctness. In order to fix the implementation of pfn_to_mfn on ARM in a follow-up patch, we have to introduce new helpers to return the DMA from a PFN and the invert. On x86, the new helpers will be an alias of pfn_to_mfn and mfn_to_pfn. The helpers will be used in swiotlb and xen_biovec_phys_mergeable. This is necessary in the latter because we have to ensure that the biovec code will not try to merge a biovec using foreign page and another using Linux memory. Lastly, the helper mfn_to_local_pfn has been renamed to bfn_to_local_pfn given that the only usage was in swiotlb. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-06-17xen: Include xen/page.h rather than asm/xen/page.hJulien Grall1-1/+1
Using xen/page.h will be necessary later for using common xen page helpers. As xen/page.h already include asm/xen/page.h, always use the later. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: netdev@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-06xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARMStefano Stabellini1-0/+15
Make sure that xen_swiotlb_init allocates buffers that are DMA capable when at least one memblock is available below 4G. Otherwise we assume that all devices on the SoC can cope with >4G addresses. We do this on ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case. No functional changes on x86. From: Chen Baozi <baozich@gmail.com> Signed-off-by: Chen Baozi <baozich@gmail.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Chen Baozi <baozich@gmail.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-20arm64: Relax licensing of arm64 Xen DMA operationsChuck Tuffli1-1/+1
With Xen configured into the arm64 kernel, any driver allocating DMA'able memory for PCI operations, must be GPL compatible, regardless of its interaction with Xen. This patch relaxes the GPL requirement of xen_dma_ops and its dependencies to allow open source drivers to be compiled for the arm64 architecture. Signed-off-by: Chuck Tuffli <chuck.tuffli@emulex.com>
2014-12-04xen/arm: introduce GNTTABOP_cache_flushStefano Stabellini1-2/+32
Introduce support for new hypercall GNTTABOP_cache_flush. Use it to perform cache flashing on pages used for dma when necessary. If GNTTABOP_cache_flush is supported by the hypervisor, we don't need to bounce dma map operations that involve foreign grants and non-coherent devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2014-12-04xen/arm/arm64: introduce xen_arch_need_swiotlbStefano Stabellini1-0/+7
Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-12-04xen/arm/arm64: merge xen/mm32.c into xen/mm.cStefano Stabellini1-0/+84
Merge xen/mm32.c into xen/mm.c. As a consequence the code gets compiled on arm64 too. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-10swiotlb-xen: use xen_alloc/free_coherent_pagesStefano Stabellini1-3/+3
Use xen_alloc_coherent_pages and xen_free_coherent_pages to allocate or free coherent pages. We need to be careful handling the pointer returned by xen_alloc_coherent_pages, because on ARM the pointer is not equal to phys_to_virt(*dma_handle). In fact virt_to_phys only works for kernel direct mapped RAM memory. In ARM case the pointer could be an ioremap address, therefore passing it to virt_to_phys would give you another physical address that doesn't correspond to it. Make xen_create_contiguous_region take a phys_addr_t as start parameter to avoid the virt_to_phys calls which would be incorrect. Changes in v6: - remove extra spaces. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-10-09swiotlb-xen: introduce xen_swiotlb_set_dma_maskStefano Stabellini1-0/+1
Implement xen_swiotlb_set_dma_mask, use it for set_dma_mask on arm. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-10-10xen/arm,arm64: enable SWIOTLB_XENStefano Stabellini1-0/+64
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to program the hardware with mfns rather than pfns for dma addresses. Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select SWIOTLB_XEN on arm and arm64. At the moment always rely on swiotlb-xen, but when Xen starts supporting hardware IOMMUs we'll be able to avoid it conditionally on the presence of an IOMMU on the platform. Implement xen_create_contiguous_region on arm and arm64: for the moment we assume that dom0 has been mapped 1:1 (physical addresses == machine addresses) therefore we don't need to call XENMEM_exchange. Simply return the physical address as dma address. Initialize the xen-swiotlb from xen_early_init (before the native dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v8: - assume dom0 is mapped 1:1, no need to call XENMEM_exchange. Changes in v7: - call __set_phys_to_machine_multi from xen_create_contiguous_region and xen_destroy_contiguous_region to update the P2M; - don't call XENMEM_unpin, it has been removed; - call XENMEM_exchange instead of XENMEM_exchange_and_pin; - set nr_exchanged to 0 before calling the hypercall. Changes in v6: - introduce and export xen_dma_ops; - call xen_mm_init from as arch_initcall. Changes in v4: - remove redefinition of DMA_ERROR_CODE; - update the code to use XENMEM_exchange_and_pin and XENMEM_unpin; - add a note about hardware IOMMU in the commit message. Changes in v3: - code style changes; - warn on XENMEM_put_dma_buf failures.
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-05 01:15:44 +0300