summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2023-06-08arm64: dts: st: add stm32mp257f-ev1 board supportAlexandre Torgue1-0/+1
Add STM32MP257F Evaluation board support. It embeds a STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ... Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-19arm64: dts: nuvoton: Add initial NPCM8XX device treeTomer Maimon1-0/+1
This adds initial device tree support for the Nuvoton NPCM845 Board Management controller (BMC) SoC family. The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and have various peripheral IPs. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-01-26arm64: dts: fsd: Add initial device tree supportAlim Akhtar1-0/+1
Add initial device tree support for "Full Self-Driving" (FSD) SoC This SoC contain three clusters of four cortex-a72 CPUs and various peripheral IPs. Cc: linux-fsd@tesla.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Arjun K V <arjun.kv@samsung.com> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com> Signed-off-by: Chandrasekar R <rcsekar@samsung.com> Signed-off-by: Shashank Prashar <s.prashar@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220124141644.71052-15-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-04-08arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetreeHector Martin1-0/+1
This currently supports: * SMP (via spin-tables) * AIC IRQs * Serial (with earlycon) * Framebuffer A number of properties are dynamic, and based on system firmware decisions that vary from version to version. These are expected to be filled in by the loader. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-01-20ARM: remove zte zx platformArnd Bergmann1-1/+0
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with Baoyou Xie and Shawn Guo subsequently becoming maintainers after the addition of the 64-bit variant. However, the only machines that were ever supported upstream are the reference designs, not actual set-top-box devices that would benefit from this support. All ZTE set-top-boxes from the past few years seem to be based on third-party SoCs. While there is very little information about zx296702 and zx296718 on the web, I found some references to other chips from the same family, such as zx296716 and zx296719, which were never submitted for upstream support. Finally, there is no support for the GPU on either of them, with the lima and panfrost device drivers having been added after work on the zx platform had stopped. Shawn confirmed that he has not seen any interest in this platform for the past four years, and that it can be removed. Thanks to Jun and Shawn for maintaining this platform over the past five years. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-09-23arm64: dts: visconti: Add device tree for TMPV7708 RM main boardNobuhiro Iwamatsu1-0/+1
Add basic support for the Visconti TMPV7708 SoC peripherals - - CPU - CA53 x 4 and 2 cluster. - not support PSCI, currently only spin-table is supported. - Interrupt controller (ARM Generic Interrupt Controller) - Timer (ARM architected timer) - UART (ARM PL011 UART controller) - SPI (ARM PL022 SPI controller) - I2C (Synopsys DesignWare APB I2C Controller) - Pin control (Visconti specific) Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
2020-08-04Merge tag 'arm-newsoc-5.9' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are three SoC families newly dded to the 32-bit and 64-bit Arm architecture code in the kernel this time: - Daniel Palmer adds initial support for two chips made by MStar, a taiwanese SoC manufacturer that became part of Mediatek in 2012. For now, the added support is fairly minimal, with just two of its Cortex-A7 based 32-bit camera chips getting support for a limited set of on-chip peripherals. - Lars Povlsen from Microchip adds support for their new Sparx5 family of ethernet switch chips using 64-bit Cortex-A53 cores. These are descended from earlier VSC7xxx SparX and Ocelot chips using 32-bit MIPS cores. - Daniele Alessandrelli from Intel adds support for the new Keem Bay SoC for computer vision, built around a Movidius VPU with Linux running on Arm Cortex-A53 cores" * tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: mstar: Correct the compatible string for pmsleep dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep ARM: mstar: Add reboot support ARM: mstar: Add "pmsleep" node to base dtsi ARM: mstar: Add PMU ARM: mstar: Adjust IMI size for infinity3 ARM: mstar: Adjust IMI size for mercury5 ARM: mstar: Adjust IMI size of infinity ARM: mstar: Add IMI SRAM region dt-bindings: arm: mstar: Move existing MStar binding descriptions dt-bindings: arm: mstar: Add binding details for mstar, pmsleep ARM: mstar: Fix dts filename for 70mai midrive d08 ARM: mstar: Add dts for 70mai midrive d08 ARM: mstar: Add dts for msc313(e) based BreadBee boards ARM: mstar: Add mercury5 series dtsis ARM: mstar: Add infinity/infinity3 family dtsis ARM: mstar: Add Armv7 base dtsi ARM: mstar: Add binding details for mstar,l3bridge ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs ...
2020-07-24arm64: dts: amazon: rename al folder to be amazonHanna Hawa1-1/+1
As preparation to add device tree binding for Amazon's Annapurna Labs Alpine v3 support. Rename al device tree folder to be amazon. Link: https://lore.kernel.org/r/20200724132654.16549-3-hhhawa@amazon.com Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22arm64: dts: sparx5: Add basic cpu supportLars Povlsen1-0/+1
This adds the basic DT structure for the Microchip Sparx5 SoC, and the reference boards, pcb125, pcb134 and pcb135. The two latter have a NAND vs a eMMC centric variant (as a mount option). Link: https://lore.kernel.org/r/20200615133242.24911-4-lars.povlsen@microchip.com Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-04-06arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGADinh Nguyen1-0/+1
Add the initial device tree files for Intel's Agilex SoCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-02-09arm64: dts: bitmain: Add BM1880 SoC supportManivannan Sadhasivam1-0/+1
Add devicetree support for Bitmain BM1880 SoC, consisting of a Dual core ARM Cortex A53 subsystem, a Single core RISC-V subsystem and a Tensor Processor subsystem. Only ARM Cortex A53 Application processor subsystem support is enabled for now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-07-18arm64: dts: ti: Add support for AM654 EVM base boardNishanth Menon1-0/+1
The EValuation Module(EVM) platform for AM654 consists of a common Base board + one or more of daughter cards, which include: a) "Personality Modules", which can be specific to a profile, such as ICSSG enabled or Multi-media (including audio). b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2 c) Camera daughter card d) various display panels Among other options. There are two basic configurations defined which include an "EVM" configuration and "IDK" (Industrial development kit) which differ in the specific combination of daughter cards that are used. To simplify support, we choose to support just the base board as the core device tree file and all daughter cards would be expected to be device tree overlays. Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-24arm64: dts: move berlin SoC files from marvell dir to synaptics dirJisheng Zhang1-0/+1
Move device tree files as part of transition from Marvell berlin to Synaptics berlin. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
2017-12-03arm64: dts: sort vendor subdirectories in Makefile alphabeticallyMasahiro Yamada1-1/+1
The list is almost sorted. Move "lg" up to complete it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-11-15Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds1-33/+25
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-10kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada1-33/+25
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29Merge tag 'actions-arm64-dt-for-4.13' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt64 Pull "Actions Semi ARM64 based SoC DT for 4.13" from Andreas Färber: This adds an initial DT for the S900 SoC and a devboard based on it. * tag 'actions-arm64-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics
2017-06-19arm64: dts: Add Actions Semi S900 and Bubblegum-96Andreas Färber1-0/+1
Add Device Trees for Actions Semiconductor S900 SoC and uCRobotics Bubblegum-96 board. UART0/1/4/6 interrupts are guesses. Cc: 96boards@ucrobotics.com Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-05-25ARM64: dts: Add Realtek RTD1295 and Zidoo X9SAndreas Färber1-0/+1
Add initial device trees for the RTD1295 SoC and the Zidoo X9S TV box. The CPUs lack the enable-method property because the vendor device tree uses a custom "rtk-spin-table" method and "psci" did not appear to work. The UARTs lack the interrupts properties because the vendor device tree connects them to a custom interrupt controller. earlycon works without. A list of memory reservations is adopted from v1.2.11 vendor device tree: 0x02200000 can be used for an initrd, 0x01b00000 is audio-related; ion-related 0x02600000, 0x02c00000 and 0x11000000 are left out; 0x10000000 is used for sharing the U-Boot environment; others remain to be investigated. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-11-03arm64: dts: add Pine64 supportAndre Przywara1-0/+1
The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Maxime: Removed the common DTSI and include directly the pine64 DTS] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-16arm64: dts: Add ZTE ZX296718 SoC dts and MakefileJun Nie1-0/+1
Add device tree support for ZX296718 SoC and evaluation board based on it. Also document new values. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-14arm64: dts: Add dts files for LG Electronics's lg1312 SoCChanho Min1-0/+1
Add initial dtsi file to support lg1312 SoC which based on Cortex-A53. Also add dts file to support lg1312 reference board which based on lg1312 SoC. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-13Merge tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson ↵Olof Johansson1-0/+1
into next/dt64 This series adds initial support for the Amlogic S905 based Tronsmart Vega S95 Pro, Meta and Telos TV boxes. - Add new DTS to enable support for the boards - Add documentation for compatibles and vendor prefix * tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson: ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards ARM64: dts: Prepare configs for Amlogic Meson GXBaby Documentation: devicetree: amlogic: Document Meson GXBaby devicetree: bindings: Add vendor prefix for Tronsmart Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-07ARM64: dts: Prepare configs for Amlogic Meson GXBabyAndreas Färber1-0/+1
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-02-27arm64: dts: add the Alpine v2 EVPAntoine Tenart1-0/+1
This patch adds the initial support for the Alpine v2 EVP board from Annapurna Labs (Amazon). Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Barak Wasserstrom <barak@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-23Merge tag 'armsoc-tegra' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols
2015-12-22arm64: dts: uniphier: add PH1-LD10 SoC/board supportMasahiro Yamada1-0/+1
This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-11-24arm64: tegra: Add Tegra132 supportThierry Reding1-0/+1
NVIDIA Tegra132 (also known as Tegra K1 64-bit) is a variant of Tegra124 but with 2 Denver CPUs instead of the 4+1 Cortex-A15. This adds the DTSI file for the SoC, which is mostly similar to the one for Tegra124. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16arm64: renesas: r8a7795: Add Renesas R8A7795 SoC supportSimon Horman1-0/+1
Initial version of Renesas R-Car H3 support (V10) Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-11Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
2015-10-28arm64: enable building of all dtbsRob Herring1-0/+6
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. This is simpler for arm64 which has a bunch of sub-dirs. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org
2015-10-06arm64: dts: Add base stratix 10 dtsiDinh Nguyen1-0/+1
Add the base DTS for Altera's SoCFPGA Stratix 10 platform. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Add a non-zero ranges property for /soc node v3: change #address-cells and #size-cells to <2> change the GIC address to 0xfffc1000 update the GIC virtual CPU reg length to 0x2000 v2: use interrupt-affinity for pmu node
2015-08-13Merge tag 'berlin64-for-v4.3-1' of ↵Olof Johansson1-0/+1
git://git.infradead.org/users/hesselba/linux-berlin into next/arm64 Initial support for Marvell Berlin4CT ARM64 SoC * tag 'berlin64-for-v4.3-1' of git://git.infradead.org/users/hesselba/linux-berlin: arm64: dts: Add dts files for Marvell Berlin4CT SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-03arm64: dts: Add dts files for Marvell Berlin4CT SoCJisheng Zhang1-0/+1
Add initial dtsi file to support Marvell Berlin4CT SoC with quad Cortex-A53 CPUs. It also adds dts file for Marvell Berlin4CT DMP board which is based on Berlin4CT SoC. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-07-29arm64: dts: Add Broadcom North Star 2 supportRay Jui1-0/+1
Add Broadcom NS2 device tree binding document. Also add initial device tree dtsi for Broadcom North Star 2 (NS2) SoC and board support for NS2 SVK board Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 boardHeiko Stübner1-0/+1
In terms of peripherals the rk3368 is quite similar to the rk3288, which makes it possible to have a lot basic components working in the first go. More to follow once I tracked down all the tiny differences that still exist in some parts. With these dts files, the R88 board is able to boot from an attached usb device and most likely from its emmc too, if the emmc uses a standard partition table instead of Rockchip's own one - the emmc itself is detected correctly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-06-05arm64: dts: Add dts files for Hisilicon Hi6220 SoCBintian Wang1-0/+1
Add initial dtsi file to support Hisilicon Hi6220 SoC with support of Octal core CPUs in two clusters and each cluster has quard Cortex-A53. Also add dts file to support HiKey development board which based on Hi6220 SoC. Signed-off-by: Bintian Wang <bintian.wang@huawei.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Yiping Xu <xuyiping@hisilicon.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2015-04-03arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dtsKumar Gala1-0/+1
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916 evaluation board. At the current time we only boot up a single processor. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and MakefileZhizhou Zhang1-0/+1
Adds the device tree support for Spreadtrum SC9836 SoC which is based on Sharkl64 platform. Sharkl64 platform contains the common nodes of Spreadtrum's arm64-based SoCs. Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-12ARM64: Add new Xilinx ZynqMP SoCMichal Simek1-0/+1
Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-17Merge tag '64bit-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes and additions from Olof Johansson: "The 64-bit set of updates this release cycle adds support for three new platforms: - Samsunc Exynos 7 - Freescale LS2085a - Mediatek MT8173 For all these, the changes mostly consititude additions of DT contents, but also some Kconfig entries to allow dependency/selection of drivers per-platform, etc" * tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: Kconfig: clean up two no-op Kconfig options from CONFIG_ARCH_TEGRA* arm64: Fix sort of platform Kconfig entries arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig arm64: Add DTS support for FSL's LS2085A SoC arm64: mediatek: Add MT8173 SoC Kconfig and defconfig arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile Document: DT: Add bindings for mediatek MT8173 SoC Platform arm64: Add Tegra132 support arm64: Enable ARMv8 based exynos7 SoC support arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7 arm64: dts: Add PMU DT node for exynos7 SoC arm64: dts: Add initial pinctrl support to exynos7 arm64: dts: Add initial device tree support for exynos7
2015-01-28Merge tag 'v3.20-next-arm64' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson1-0/+1
next/arm64 Merge "ARM: mediatek: arm64 changes for v3.20" from Matthias Brugger: Add support for mt8173 SoC from Mediatek. - add DT bindings documentation - add dts files for SoC and evaluation board - add to Kconfig and defconfig * tag 'v3.20-next-arm64' of https://github.com/mbgg/linux-mediatek: arm64: mediatek: Add MT8173 SoC Kconfig and defconfig arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile Document: DT: Add bindings for mediatek MT8173 SoC Platform Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-28arm64: Add DTS support for FSL's LS2085A SoCBhupesh Sharma1-0/+1
This patch adds the device tree support for FSL LS2085A SoC based on ARMv8 architecture. Following levels of DTSI/DTS files have been created for the LS2085A SoC family: - fsl-ls2085a.dtsi: DTS-Include file for FSL LS2085A SoC. - fsl-ls2085a-simu.dts: DTS file for FSL LS2085a software simulator model. In addition, this patch adds build support for FSL's LS2085A simulator model in arm64 dts Makefile. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Arnab Basu <arnab_basu@rocketmail.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and MakefileEddie Huang1-0/+1
Add device tree support for MT8173 SoC and evaluation board based on it. Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-01-20arm64: Add dtb files to archclean ruleJungseok Lee1-2/+0
As dts files have been reorganised under vendor subdirs, dtb files cannot be removed with "make distclean" now. Thus, this patch moves dtb files under archclean rule and removes unnecessary entries. Cc: Robert Richter <rrichter@cavium.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-12-22arm64: dts: Add initial device tree support for exynos7Naveen Krishna Ch1-0/+1
Add initial device tree nodes for exynos7 SoC and board dts file to support espresso board based on exynos7 SoC. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Reviewed-by: Thomas Abraham <thomas.ab@samsung.com> Tested-by: Thomas Abraham <thomas.ab@samsung.com> Cc: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2014-11-28arm64: amd-seattle: Adding device tree for AMD Seattle platformSuravee Suthikulpanit1-0/+1
Initial revision of device tree for AMD Seattle Development platform. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Thomas Lendacky <Thomas.Lendacky@amd.com> Signed-off-by: Joel Schopp <Joel.Schopp@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-21dts, arm64: Move dts files to vendor subdirsRobert Richter1-3/+3
Moving dts files to vendor subdirs. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Robert Richter <rrichter@cavium.com>
2014-10-21dts, kbuild: Implement support for dtb vendor subdirsRobert Richter1-0/+1
This patch adds support of vendor sub directories for dtb files. Subdirectories can be specified in $(dts-dirs). Kbuild traverses over all directories while building and installing dtb files. The directory tree is also reflected in the install path. Tested-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Robert Richter <rrichter@cavium.com>