summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2023-05-09arm64: dts: amlogic: add missing cache propertiesKrzysztof Kozlowski1-0/+1
As all level 2 and level 3 caches are unified, add required cache-unified properties to fix warnings like: meson-a1-ad401.dtb: l2-cache0: 'cache-unified' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230421223211.115612-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-02-21Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+3
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...
2023-02-10arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitiveHeiner Kallweit1-3/+3
The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-gx: add missing unit address to rng node nameNeil Armstrong1-1/+1
Fixes: bus@c8834000: rng: {...} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-6-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-26arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node nameNeil Armstrong1-1/+1
Fixes: scpi: clocks: 'clock-controller' does not match any of the regexes: '^clocks-[0-9a-f]+$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-1-44351528957e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-13arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit addressMartin Blumenstingl1-1/+1
Node names should be generic and use hyphens instead of underscores to not cause warnings. Also nodes without a reg property should not have a unit-address. Change the scpi_dvfs node to use clock-controller as node name without a unit address (since it does not have a reg property). Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-7-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-13arm64: dts: meson-gx: Fix Ethernet MAC address unit nameMartin Blumenstingl1-1/+1
Unit names should use hyphens instead of underscores to not cause warnings. Fixes: bfe59f92d306 ("ARM64: dts: amlogic: gxbb: Enable NVMEM") Suggested-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-5-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-11-07arm64: dts: Update cache properties for amlogicPierre Gondois1-0/+1
The DeviceTree Specification v0.3 specifies that the cache node 'compatible' and 'cache-level' properties are 'required'. Cf. s3.8 Multi-level and Shared Cache Nodes The 'cache-unified' property should be present if one of the properties for unified cache is present ('cache-size', ...). Update the Device Trees accordingly. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221107155825.1644604-4-pierre.gondois@arm.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-06-10arm64: dts: amlogic: adjust whitespace around '='Krzysztof Kozlowski1-1/+1
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220526204552.832961-1-krzysztof.kozlowski@linaro.org
2022-02-04arm64: dts: meson-gx: add ATF BL32 reserved-memory regionChristian Hewitt1-0/+6
Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com
2021-06-01arm64: dts: meson: set 128bytes FIFO size on uart ANeil Armstrong1-0/+1
The first UART controller in "Everything-Else" power domain, usually used for Bluetooth HCI has 128bytes FIFO depth. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
2021-04-01arm64: dts: amlogic: Assign a fixed index to mmc devicesAlexander Stein1-0/+6
Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1]. [1] https://patchwork.kernel.org/patch/11747669/ Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.") The unconventional order (B, C, A) is due to the fact that sd_emmc_a is (according to the comments) only used for SDIO. AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of them enabled. So the alias order should match the previous non-async order for all of them. Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210203192824.854491-1-alexander.stein@mailbox.org
2021-01-26Revert "arm64: dts: amlogic: add missing ethernet reset ID"Neil Armstrong1-3/+0
It has been reported on IRC and in KernelCI boot tests, this change breaks internal PHY support on the Amlogic G12A/SM1 Based boards. We suspect the added signal to reset more than the Ethernet MAC but also the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY. This reverts commit f3362f0c18174a1f334a419ab7d567a36bd1b3f3 while we find and acceptable solution to cleanly reset the Ethernet MAC. Reported-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Jérôme Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210126080951.2383740-1-narmstrong@baylibre.com
2020-10-21arm64: dts: amlogic: add missing ethernet reset IDAnand Moon1-0/+3
Add reset external reset of the ethernet mac controller Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201020120141.298240-1-jbrunet@baylibre.com
2020-07-13arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindingsMartin Blumenstingl1-8/+10
The "amlogic,meson-gx-pwrc-vpu" binding only supports the VPU power domain, while actually there are more power domains behind that set of registers. Switch to the new bindings so we can add more power domains as needed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620161211.23685-1-martin.blumenstingl@googlemail.com
2020-05-20arm64: dts: meson-gx: add aiu supportJerome Brunet1-0/+13
Add the AIU audio device to the Amlogic GX SoC family DT. ATM, this device provides the i2s and spdif output stages and also the hdmi and internal codec glues. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-3-jbrunet@baylibre.com
2020-04-29arm64: dts: meson: fixup SCP sram nodesNeil Armstrong1-5/+5
The GX and AXG SCP sram nodes were using invalid compatible and node names for the sram entries. Fixup the sram entries node names, and use proper compatible for them. It notably fixes: sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com
2020-03-16arm64: dts: meson: add thermal zones to meson gx devicesChristian Hewitt1-0/+52
Adapt and update current VIM2 thermal zones support so that zones are available on all meson GXBB/GXL/GXM devices - similar to changes made for G12A/G12B/SM1 devices. Suggested-by: Nick Xie <nick@khadas.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/1584328854-28575-1-git-send-email-christianshewitt@gmail.com
2019-11-06arm64: dts: meson-gx: fix i2c compatibleNeil Armstrong1-4/+4
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible: Additional items are not allowed ('amlogic,meson-gxbb-i2c' was unexpected) meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible:0: 'amlogic,meson-gx-i2c' is not one of ['amlogic,meson6-i2c', 'amlogic,meson-gxbb-i2c', 'amlogic,meson-axg-i2c'] meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible: ['amlogic,meson-gx-i2c', 'amlogic,meson-gxbb-i2c'] is too long Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-11-06arm64: dts: meson-gx: cec node should be disabled by defaultNeil Armstrong1-0/+1
This fixes the following DT schemas check errors: meson-gxl-s905x-hwacom-amazetv.dt.yaml: cec@100: 'hdmi-phandle' is a required property meson-gxm-rbox-pro.dt.yaml: cec@100: 'hdmi-phandle' is a required property because CEC is not enabled on these boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-10-03arm64: dts: meson: Link nvmem and secure-monitor nodesCarlo Caione1-0/+1
The former is going to use the latter to retrieve the efuses data. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-gx: fix periphs bus node nameNeil Armstrong1-1/+1
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: periphs@c8834000: $nodename:0: 'periphs@c8834000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' meson-gxl-s805x-libretech-ac.dt.yaml: periphs@c8834000: $nodename:0: 'periphs@c8834000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-gx: fix mhu compatibleNeil Armstrong1-1/+1
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: mailbox@404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu'] meson-gxl-s805x-libretech-ac.dt.yaml: mailbox@404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu'] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-gx: fix watchdog compatibleNeil Armstrong1-1/+1
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: watchdog@98d0: compatible:0: 'amlogic,meson-gx-wdt' is not one of ['amlogic,meson-gxbb-wdt'] meson-gxl-s805x-libretech-ac.dt.yaml: watchdog@98d0: compatible:0: 'amlogic,meson-gx-wdt' is not one of ['amlogic,meson-gxbb-wdt'] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-gx: fix spifc compatibleNeil Armstrong1-1/+1
This fixes the following DT schemas check errors: meson-gxl-s805x-libretech-ac.dt.yaml: spi@8c80: compatible:0: 'amlogic,meson-gx-spifc' is not one of ['amlogic,meson6-spifc', 'amlogic,meson-gxbb-spifc'] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-gx: fix reset controller compatibleNeil Armstrong1-1/+1
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: reset-controller@4404: compatible:0: 'amlogic,meson-gx-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset'] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson-gx: drop the vpu dmc memory cellNeil Armstrong1-3/+2
This fixes the following DT schemas check errors: meson-gxl-s805x-libretech-ac.dt.yaml: vpu@d0100000: reg-names: Additional items are not allowed ('dmc' was unexpected) meson-gxl-s805x-libretech-ac.dt.yaml: vpu@d0100000: reg-names: ['vpu', 'hhi', 'dmc'] is too long The 'dmc' register area was replaced by the amlogic,canvas property which was introduced in commit f1726043426c73 ("arm64: dts: meson-gx: add dmcbus and canvas nodes.") and commit cf34287986d0b6 ("arm64: dts: meson-gx: Add canvas provider node to the vpu") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-30arm64: dts: meson: fix ethernet mac reg formatNeil Armstrong1-2/+2
This fixes the following DT schemas check errors: meson-axg-s400.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long meson-axg-s400.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short meson-g12a-u200.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long meson-g12a-u200.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short meson-gxbb-nanopi-k2.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too long meson-gxl-s805x-libretech-ac.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too lon while here, also drop the redundant reg property from meson-gxl.dtsi because it had the same value as meson-gx.dtsi from which it inherits. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-09arm64: dts: meson-gx: add video decoder entryMaxime Jourdan1-0/+14
Add the base video decoder node compatible with the meson vdec driver, for GX* chips. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-09arm64: dts: meson: add ethernet fifo sizesJerome Brunet1-0/+2
If unspecified in DT, the fifo sizes are not automatically detected by the dwmac1000 dma driver and the reported fifo sizes default to 0. Because of this, flow control will be turned off on the device. Add the fifo sizes provided by the datasheets in the SoC in DT so flow control may be enabled if necessary. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-12arm64: dts: meson: add dwmac-3.70a to ethmac compatible listJerome Brunet1-1/+3
After discussing with Amlogic, the Synopsys GMAC version used by the gx and axg family is the 3.70a. Set this is in DT Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-02-15Merge tag 'amlogic-dt64' of ↵Arnd Bergmann1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.1 - new board: G12a-based x96 max - G12a: add peripheral clock controller and clock measure support - s400: fix SD/eMMC max rate issues - s400: audio: add sp/dif in support - GX: support simplefb * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add g12a x96 max board dt-bindings: arm: amlogic: add amediatech x96-max bindings arm64: dts: meson: g12a: add peripheral clock controller arm64: dts: meson: g12a: add clk measure support arm64: dts: meson: axg: add clk measure support arm64: dts: meson: fix g12a buses arm64: dts: meson-axg: add efuse device arm64: dts: meson: s400: fix emmc maximum rate arm64: dts: meson: s400: enable sdr104 on sdio arm64: dts: meson-gx: add support for simplefb dt-bindings: meson: add specific simplefb bindings arm64: dts: meson-gx: Add canvas provider node to the vpu arm64: dts: meson-axg: s400: add spdifin to the sound card arm64: dts: meson-axg: s400: add spdif-dir codec arm64: dts: meson-axg: add spdifin Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30arm64: dts: Remove inconsistent use of 'arm,armv8' compatible stringRob Herring1-4/+4
The 'arm,armv8' compatible string is only for software models. It adds little value otherwise and is inconsistently used as a fallback on some platforms. Remove it from those platforms. This fixes warnings generated by the DT schema. Reported-by: Michal Simek <michal.simek@xilinx.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Chanho Min <chanho.min@lge.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-17arm64: dts: meson-gx: add support for simplefbMaxime Jourdan1-0/+22
SimpleFB allows transferring a framebuffer from the firmware/bootloader to the kernel, while making sure the related clocks and power supplies stay enabled. Add nodes for CVBS and HDMI Simple Framebuffers. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-17arm64: dts: meson-gx: Add canvas provider node to the vpuMaxime Jourdan1-0/+1
Allows the vpu driver to optionally use a canvas provider node. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-12-08arm64: dts: meson: Fix IRQ trigger type for macirqCarlo Caione1-1/+1
A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed. After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING. The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well. Fixes: feb3cbea0946 ("ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage") Fixes: 6d28d577510f ("ARM64: dts: meson-axg: fix ethernet stability issue") Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-29arm64: dts: meson-gx: Add Internal Clock Measurer nodeNeil Armstrong1-0/+5
The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal clock paths frequencies. This patch adds the node in the top-level meson-gx dtsi. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson: Switch simple-mfd and syscon orderNeil Armstrong1-2/+2
The order between "syscon" and "simple-mfd" is important because in these particular cases, the node needs to be first a "simple-mfd" to expose it's sub-nodes, and later on a "syscon" to permit other nodes to access this register space through the "syscon" mechanism. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson-gx: add dmcbus and canvas nodes.Maxime Jourdan1-0/+13
DMC is a small memory region with various registers, including the ones needed for the canvas module. Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson-gx: increase default shared CMA pool sizeChristian Hewitt1-1/+1
Devices using the new V4L2 mem2mem vdec require a larger CMA pool. As nearly all GX* devices are video/media focused and will use it, set a larger (256MB) default value. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-28ARM64: dts: meson-gx: fix ATF reserved memory regionKevin Hilman1-0/+6
Vendor firmware/uboot has different reserved regions depending on firmware version, but current codebase reserves the same regions on GXL and GXBB, so move the additional reserved memory region to common .dtsi. Found when putting a recent vendor u-boot on meson-gxbb-p200. Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-28ARM64: dts: meson: fix register ranges for SD/eMMCKevin Hilman1-3/+3
Based on updated information from Amlogic, correct the register range for the SD/eMMC blocks to the right size. Reported-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-20ARM64: dts: meson-gx: make efuse read-onlyJerome Brunet1-0/+1
efuse is one time programmable, so it is safer to deny write request to this memory, unless the user is savvy enough to remove the read-only flag from DTB Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-08ARM64: dts: amlogic: Convert to new-style SPDX license identifiersNeil Armstrong1-38/+1
Move the SPDX-License-Identifier lines to the top and drop the license splat. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-02-13ARM64: dts: meson: uart: fix address space rangeYixun Lan1-5/+5
The address space range is actually 0x18, fixed here. Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-08ARM64: dts: amlogic: use generic bus node namesKevin Hilman1-3/+3
The DT spec recommends that node-names have generic names like "bus". Fix that in the Amlogic DTs, while leaving the label names to have more SoC-specific names that match with the HW documentation. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-06ARM64: dts: meson-gx: grow reset controller memory zoneNeil Armstrong1-1/+1
Now the Amlogic Meson GX SoCs datasheet documents all the Reset registers, grow the memory in the node to allow usage of the level registers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-06ARM64: dts: meson-gx: add VPU power domainNeil Armstrong1-0/+11
This patch adds support for the VPU Power Domain nodes, and attaches the VPU power domain to the VPU node. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-29ARM64: dts: meson-gx: add gpio interrupt controllerJerome Brunet1-0/+9
Add gpio interrupt controller to Amlogic GX family SoCs Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-12ARM64: dts: meson-gx: remove unnecessary uart compatibleNeil Armstrong1-5/+5
Since the switch to documented uart bindings, the old undocumented compatible binding was left for simplicity. This patch removes these unneeded compatible strings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>