| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
|
|
There is no "vselect-en" property, neither in the bindings nor in the
Linux driver:
imx8mm-phyboard-polis-rdk.dtb: pmic@8: regulators:ldo2: Unevaluated properties are not allowed ('vselect-en' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of
phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Corrected the label of the VPU regulator node (buck 3)
from reg_vdd_gpu to reg_vdd_vpu.
Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support")
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix the following dtbs_check warning on all of i.MX8M variants:
"
opp-table: Unevaluated properties are not allowed ('opp-25M', 'opp-100M', 'opp-750M' were unexpected)
"
Using the following command:
"
$ sed -i '/opp-[0-9]\+M/ s@M {@000000 {@' arch/arm64/boot/dts/freescale/imx8m*
"
The Documentation/devicetree/bindings/opp/opp-v2-base.yaml expects the OPP
subnode names to be full frequency listings in Hz without unit suffixes.
Only the i.MX8M DTs are affected per "git grep 'opp-[0-9]\+M'", so fix them.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add initial support for phyBOARD-Polis-i.MX8MM.
Main features are:
* Bluetooth and Wifi
* CANFD
* eMMC
* i2c RTC
* Ethernet
* PCIe
* RS232/RS485
* SD-Card
* SPI-NOR flash
* USB
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
