summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/marvell
AgeCommit message (Collapse)AuthorFilesLines
2023-11-02Merge tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-10/+57
Pull SoC DT updates from Arnd Bergmann: "There are a couple new SoCs that are supported for the first time: - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU cores - Sophgo makes RISC-V based chips, and we now support the CV1800B chip used in the milkv-duo board and the massive sg2042 chip in the milkv-pioneer, a 64-core developer workstation. - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon 7c and gets added with some Xiaomi phones - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC and the RZ/G3S (R9A08G045) embedded SoC. There are also a bunch of newly supported machines that use already supported chips. On the 32-bit side, we have: - USRobotics USR8200 is a NAS/Firewall/router based on the ancient Intel IXP4xx platform - A couple of machines based on the NXP i.MX5 and i.MX6 platforms - One machine each for Allwinner V3s, Aspeed AST2600, Microchip sama5d29 and ST STM32mp157 The other ones all use arm64 cores on chips from allwinner, amlogic, freescale, mediatek, qualcomm and rockchip" * tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits) ARM: dts: BCM5301X: Set switch ports for Linksys EA9200 ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U arm64: dts: socionext: add missing cache properties riscv: dts: thead: convert isa detection to new properties arm64: dts: Update cache properties for socionext arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM arm64: dts: ti: k3-am62p: Add nodes for more IPs arm64: dts: rockchip: Add Turing RK1 SoM support dt-bindings: arm: rockchip: Add Turing RK1 dt-bindings: vendor-prefixes: add turing arm64: dts: rockchip: Add DFI to rk3588s arm64: dts: rockchip: Add DFI to rk356x arm64: dts: rockchip: Always enable DFI on rk3399 ...
2023-10-25Revert "Merge branch 'mv88e6xxx-dsa-bindings'"Jakub Kicinski7-164/+167
This reverts the following commits: commit 53313ed25ba8 ("dt-bindings: marvell: Add Marvell MV88E6060 DSA schema") commit 0f35369b4efe ("dt-bindings: marvell: Rewrite MV88E6xxx in schema") commit 605a5f5d406d ("ARM64: dts: marvell: Fix some common switch mistakes") commit bfedd8423643 ("ARM: dts: nxp: Fix some common switch mistakes") commit 2b83557a588f ("ARM: dts: marvell: Fix some common switch mistakes") commit ddae07ce9bb3 ("dt-bindings: net: mvusb: Fix up DSA example") commit b5ef61718ad7 ("dt-bindings: net: dsa: Require ports or ethernet-ports") As repoted by Vladimir, it breaks boot on the Turris MOX board. Link: https://lore.kernel.org/all/20231025093632.fb2qdtunzaznd73z@skbuf/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-25ARM64: dts: marvell: Fix some common switch mistakesLinus Walleij7-167/+164
Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - ports should be ethernet-ports - port@0 should be ethernet-port@0 - PHYs should be named ethernet-phy@ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24net: dsa: Use conduit and user termsFlorian Fainelli1-1/+1
Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23Merge tag 'mvebu-dt64-6.7-1' of ↵Arnd Bergmann4-8/+55
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.7 (part 1) Declare switch on eDPU (Armada 3720 based) Use proper suffix -gpios for SFP GPIO properties on uDPU (Armada 3720 based) Use appropriate label for spi1 pins on cn9310 boards * tag 'mvebu-dt64-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: eDPU: add support for version with external switch arm64: dts: marvell: uDPU: rename the SFP GPIO properties ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins Link: https://lore.kernel.org/r/8734y6aaqb.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-24arm64: dts: marvell: minor whitespace cleanup around '='Krzysztof Kozlowski1-2/+2
The DTS code coding style expects exactly one space before and after '=' sign. Link: https://lore.kernel.org/r/20230702185301.44505-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-20arm64: dts: marvell: eDPU: add support for version with external switchRobert Marko1-0/+47
New revision of eDPU uses an Marvell MV88E6361 switch to connect the SFP cage and G.hn IC instead of connecting them directly to the ethernet controllers. U-Boot will enable the switch node and disable the unused ethernet controller. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-09-20arm64: dts: marvell: uDPU: rename the SFP GPIO propertiesRobert Marko1-4/+4
Rename the GPIO related SFP properties to include the preffered -gpios suffix as defined in the SFP schema. This fixes the following warning: arch/arm64/boot/dts/marvell/armada-3720-eDPU.dtb: sfp-eth1: 'los-gpio', 'mod-def0-gpio', 'tx-disable-gpio', 'tx-fault-gpio' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/sff,sfp.yaml# Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-09-20ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pinsChris Packham2-4/+4
Both the CN9130-CRB and CN9130-DB use the SPI1 interface but had the pinctrl node labelled as "cp0_spi0_pins". Use the label "cp0_spi1_pins" and update the node name to "cp0-spi-pins-1" to avoid confusion with the pinctrl options for SPI0. Fixes: 4c43a41e5b8c ("arm64: dts: cn913x: add device trees for topology B boards") Fixes: 5c0ee54723f3 ("arm64: dts: add support for Marvell cn9130-crb platform") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-07-13arm64: dts: marvell: Add NAND flash controller to AC5Chris Packham1-0/+16
The AC5/AC5X SoC has a NAND flash controller (NFC). Add this to the base SoC dtsi file as a disabled node. The NFC integration on the AC5/AC5X only supports SDR timing modes up to 3 so requires a dedicated compatible property so this limitation can be enforced. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-07-13arm64: dts: marvell: add missing space before {Krzysztof Kozlowski2-3/+3
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-06-16arm64: dts: marvell: Fix espressobin-ultra boot failure and wifiBen Schneider1-0/+3
Boot hangs on EspressoBIN Ultra (Armada 3720) after a message that device vcc_sd1 had been disabled. The device manufacturer patched this issue in their kernel fork noting that vcc_sd1 is used by the EspressoBIN model but not the EspressoBIN Ultra. Removing the device from the tree fixes the boot hang and wifi. Signed-off-by: Ben Schneider <ben@bens.haus> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-06-16arm64: dts: marvell: Fix pca954x i2c-mux node namesGeert Uytterhoeven2-2/+2
"make dtbs_check": arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-06-16arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAMLVadym Kochan1-1/+1
Marvell NAND controller has now YAML to validate it's DT bindings, so change the node name of cp11x DTSI as it is required by nand-controller.yaml Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-05-17arm64: dts: marvell: add missing cache propertiesKrzysztof Kozlowski4-0/+6
As all level 2 and level 3 caches are unified, add required cache-unified properties to fix warnings like: ac5-98dx35xx-rd.dtb: l2-cache: 'cache-unified' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-18Merge tag 'mvebu-dt64-6.4-1' of ↵Arnd Bergmann6-7/+249
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.4 (part 1) Enlarge PCI memory window on Machiatobin (Armada 7040 based) Add supoport for the GL.iNet GL-MV1000 (Armada 3700 based) Add missing phy-mode on the cn9310 Align thermal node names with bindings * tag 'mvebu-dt64-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM64: dts: marvell: cn9310: Add missing phy-mode arm64: dts: marvell: add DTS for GL.iNet GL-MV1000 arm64: dts: marvell: align thermal node names with bindings arm64: dts: marvell: mochabin: enlarge PCI memory window Link: https://lore.kernel.org/r/87bkjlzfcw.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-07ARM64: dts: marvell: cn9310: Add missing phy-modeAndrew Lunn1-1/+2
The DSA framework has got more picky about always having a phy-mode for the CPU port. The SoC Ethernet is being configured to 10gbase-r. Set the switch phy-mode based on this. Additionally, the SoC Ethernet is using in-band signalling to determine the link speed, so add same parameter to the switch. Additionally, the cpu label has never actually been used in the binding, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-07arm64: dts: marvell: add DTS for GL.iNet GL-MV1000Enrico Mioso2-0/+240
The GL-MV1000 (Brume) is a small form-factor gateway router. It is based on the Marvell Armada 88F3720 SOC (1GHz), has 3 gigabit ethernet ports, 1 GB RAM, 16M SPI flash, 8GB eMMC and an uSD slot, as well as an USB 2.0 type A and an USB 3.0 type C port. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> CC: Pali <pali@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-07arm64: dts: marvell: align thermal node names with bindingsKrzysztof Kozlowski2-6/+6
Bindings expect thermal node names to end with '-thermal': armada-8040-db.dtb: thermal-zones: 'ap-thermal-cpu0', ... do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-04-07arm64: dts: marvell: mochabin: enlarge PCI memory windowRobert Marko1-0/+1
Armada 7040 uses a rather small 15MB memory window for every PCI adapter, however this is not sufficient for Qualcomm QCA6390 802.11ax cards that are shipped along with the OpenWrt WLAN model of MOCHAbin as ath11k requires at least 16MB of memory. So, similar to what MACCHIATOBin has been doing for years, lets move to using the second PCIe 2 memory window and expand it to 128MB to make it future proof. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-03-14arm64: dts: marvell: armada-ap810: Fix GICv3 ITS node nameRob Herring1-1/+1
The GICv3 ITS is an MSI controller, therefore its node name should be 'msi-controller'. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230207234735.201812-1-robh@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-02-21Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds8-8/+8
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...
2023-02-01arm64: dts: marvell: Fix compatible strings for Armada 3720 boardsPali Rohár8-8/+8
All Armada 3720 boards have Armada 3720 processor which is of Armada 3700 family and do not have Armada 3710 processor. So none of them should have compatible string for Armada 3710 processor. Fix compatible string for all these boards by removing wrong processor string "marvell,armada3710" and adding family string "marvell,armada3700" as the last one. (Note that this is same way how are defined Armada 3710 DTS files). [gclement: fix conflict for v6.2] Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-01-10arm64: dts: marvell: AC5/AC5X: Fix address for UART1Chris Packham1-1/+1
The correct address offset is 0x12100. Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-12-14Merge tag 'net-next-6.2' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-11-28arm64: dts: marvell: add optee FW definitionsKonstantin Porotchkin2-0/+10
Add reserved memory and ARM firmware definitions for optee memory region in Marvell Armada SoCs to avoid protected memory access. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-11-28arm64: dts: Update cache properties for marvellPierre Gondois4-0/+6
The DeviceTree Specification v0.3 specifies that the cache node 'compatible' and 'cache-level' properties are 'required'. Cf. s3.8 Multi-level and Shared Cache Nodes The recently added init_of_cache_level() function checks these properties. Add them if missing. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-11-28arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTCPali Rohár1-0/+3
MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5. Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-11-28arm64: dts: armada-3720-turris-mox: Define slot-power-limit-milliwatt for PCIePali Rohár1-0/+1
PCIe Slot Power Limit on Turris Mox is 10W. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-10-19arm64: dts: marvell: Update network description to match schemaMarcin Wojtas1-6/+11
Update the PP2 ethernet ports subnodes' names to match schema enforced by the marvell,pp2.yaml contents. Add new required properties ('reg') which contains information about the port ID, keeping 'port-id' ones for backward compatibility. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02arm64: dts: marvell: 98dx25xx: use correct property for i2c gpiosChris Packham1-4/+4
Use the correct names for scl-gpios and sda-gpios so that the generic i2c recovery code will find them. While we're here set the GPIO_OPEN_DRAIN flag on the gpios. Fixes: b795fadfc46b ("arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: add support for Methode eDPURobert Marko2-0/+15
Methode eDPU is an Armada 3720 powered board based on the Methode uDPU. They feature the same CPU, RAM, and storage as well as the form factor. However, eDPU only has one SFP slot plus a copper G.hn port. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: split Methode uDPU DTSRobert Marko2-149/+161
Split the Methode uDPU DTS into a common DTSI as preparation for adding support for Methode eDPU which is based on the uDPU to avoid duplication. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: rename temp sensor nodesRobert Marko1-4/+2
Rename the temperature sensor nodes to use "temp-sensor" which matches their device class instead of IC specific naming. Remove the status = "okay" which is not required as its default anyway. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: uDPU: remove LED node pinctrl-namesRobert Marko1-1/+0
Using pinctrl-names requires the appropriate pinctrl-0 property, otherwise it is not utilized at all. Since its not required, just remove it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: uDPU: align LED-s with bindingsRobert Marko1-6/+6
According to bindings they LED-s should be prefixed with "led" in this use case, so fix accordingly. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: uDPU: add missing SoC compatibleRobert Marko1-1/+1
According to the bindings, all boards using Armada 37xx SoC-s must have "marvell,armada3710" compatible while 3720 based ones should also have "marvell,armada3720" before it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatibleRobert Marko1-2/+2
Espressobin Ultra is part of the Espressobin family and shares the basic design, so add the generic "globalscale,espressobin" compatible to it as well. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-09-02arm64: dts: marvell: Add UART1-3 for AC5/AC5XChris Packham1-0/+30
The AC5/AC5X SoC has 4 UART blocks. Add the additional UART1-3 blocks to the base dtsi file. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-08-04Merge tag 'net-next-6.0' of ↵Linus Torvalds10-58/+58
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...
2022-07-19Merge tag 'mvebu-dt64-5.20-1' of ↵Arnd Bergmann4-0/+410
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.20 (part 1) Add support for Marvell 98DX2530 (and variants) * tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: marvell: enable the 98DX2530 pinctrl driver arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board dt-bindings: marvell: Document the AC5/AC5X compatibles Link: https://lore.kernel.org/r/87cze1qlg3.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X boardChris Packham4-0/+410
The 98DX2530 SoC is the Control and Management CPU integrated into the Marvell 98DX25xx and 98DX35xx series of switch chip (internally referred to as AlleyCat5 and AlleyCat5X). These files have been taken from the Marvell SDK and lightly cleaned up with the License and copyright retained. gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in cpu nodes, armv8 being reserved for the arm virtual models that are not meant to implement a particular CPU type. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-07-13arch: arm64: dts: marvell: rename the sfp GPIO propertiesIoana Ciornei10-58/+58
Rename the GPIO related sfp properties to include the preffered -gpios suffix. Also, with this change the dtb_check will no longer complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27arm64: dts: marvell: armada-3720: align lednode names with dtschemaKrzysztof Kozlowski1-1/+1
The node names should be generic and DT schema expects certain pattern with 'led'. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-12-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: marvell: align gpio-key node names with dtschemaKrzysztof Kozlowski2-3/+3
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-11-krzysztof.kozlowski@linaro.org
2022-06-16arm64: dts: marvell: adjust whitespace around '='Krzysztof Kozlowski4-6/+6
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220526204525.832847-1-krzysztof.kozlowski@linaro.org
2022-05-26Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds16-30/+34
Pull ARM DT updates from Arnd Bergmann: "There are 40 branches this time, adding a lot of new hardware support, and cleanups. Krzysztof Kozlowski continues his treewide cleanups. There are a number of new SoCs, all of them as part of existing families, and typically added along with a reference board: - Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L general-purpose MPU. - Renesas RZ/V2M (R9A09G011) is a smart camera SoC - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76 cores and deep learning accerlation. - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7 and dual Wifi-6. - Corstone1000 is a generic platform from Arm that is used for designing custom SoCs, the support for now is for the Fixed Virtual Platform emulation for it. - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in upcoming Chromebooks. - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first MMU-less SoC to be added in a while New machines based on already supported SoCs this time are mainly for 32-bit platforms and include: - Two wireless routers based on Broadcom bcm4708 - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly for the industrial embedded market, and on NXP LS1021A based IOT board. - Two ethernet switches based on Microchip LAN966 - Eight Qualcomm Snapdragon based machines, including a smartwatch, a Chromebook board and some phones - Another phone based on the old ST-Ericsson Ux500 platform - Seven STM32MP1 based boards - Four single-board computers based on Rockchip RK3566/RK3568" * tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits) ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash ARM: dts: turris-omnia: Add atsha204a node arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 ...
2022-05-18arm64: dts: armada-3720-turris-mox: Correct reg property for mdio devicesChris Packham1-6/+6
MDIO devices have #address-cells = <1>, #size-cells = <0>. Now that we have a schema enforcing this for marvell,orion-mdio we can see that the turris-mox has a unnecessary 2nd cell for the switch nodes reg property of it's switch devices. Remove the unnecessary 2nd cell from the switches reg property. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13Merge tag 'mvebu-dt64-5.19-1' of ↵Arnd Bergmann5-16/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.19 (part 1) Update sdhci node names to match schema on all mvebu dt64 dtsi files Armada 3720: uDPU board: - correct temperature sensors - update partition table espressobin-ultra board: - enable front USB3 port - add PHY and switch reset pins - fix SPI-NOR config * tag 'mvebu-dt64-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Update sdhci node names to match schema arm64: dts: marvell: espressobin-ultra: enable front USB3 port arm64: dts: marvell: espressobin-ultra: add PHY and switch reset pins arm64: dts: marvell: espressobin-ultra: fix SPI-NOR config arm64: dts: uDPU: correct temperature sensors arm64: dts: uDPU: update partition table Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-09arm64: dts: marvell: Update sdhci node names to match schemaChris Packham3-4/+4
Update the node names of the sdhci@ interfaces to be mmc@ to match the node name enforced by the mmc-controller.yaml schema. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 21:05:44 +0300