summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/pm6150.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2023-09-20arm64: dts: qcom: pm6150: Add resin and rtc nodesDavid Wronek1-0/+16
Add support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device, both disabled by default. Signed-off-by: David Wronek <davidwronek@gmail.com> Tested-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230824091737.75813-3-davidwronek@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03arm64: dts: qcom: Use labels with generic node names for ADC channelsMarijn Suijten1-1/+1
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property. Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405. [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/ Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2022-12-28arm64: dts: qcom: Use plural _gpios node label for PMIC gpiosMarijn Suijten1-2/+2
The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom PMICs were already using the plural _gpios label to point to this node, but a few PMICs were left behind including the recently-pulled pm(i)8950. Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005, pm(i)8950, and pm(i)8998. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org
2022-11-08arm64: dts: qcom: pm6150/l/pm7325/pms405: Fix up commentsKonrad Dybcio1-1/+3
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-12-konrad.dybcio@linaro.org
2022-10-18arm64: dts: qcom: use generic node name "gpio" in SPMI PMICKrzysztof Kozlowski1-1/+1
GPIO controller nodes are named by convention just "gpio", not "gpios". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908080938.29199-2-krzysztof.kozlowski@linaro.org
2021-06-06arm64: dts: qcom: pm6150: Add thermal zone for PMIC on-die temperatureMatthias Kaehlcke1-0/+24
Add a thermal zone for the pm6150 on-die temperature. The system should try to shut down orderly when the temperature reaches the critical trip point at 115°C, otherwise the PMIC will perform a HW power off at 145°C. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210603081215.v2.1.Id4510e9e4baaa3f6c9fdd5cdf4d8606e63c262e3@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25arm64: dts: qcom: pm6150x: add ADC_TM definitionsJishnu Prakash1-0/+10
Add ADC_TM peripheral definitions for PM6150 and PM6150L. Add ADC peripheral definition for PM6150l, which is needed for ADC_TM. Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org> Link: https://lore.kernel.org/r/1602160825-10414-2-git-send-email-jprakash@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-02-25arm64: dts: qcom: pm6150: Add label to pwrkey nodeStephen Boyd1-1/+1
Some platforms don't want to use the pmic power key as the power key event. Add a label so platforms can easily reference and mark this node as status = "disabled". Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Kiran Gunda <kgunda@codeaurora.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200115025314.3054-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-13arm64: dts: qcom: pm6150: Remove macro from unit name of adc-chanDouglas Anderson1-1/+1
This is just like commit e77cc85ee390 ("arm64: dts: qcom: sdm845: remove macro from unit name"). It fixes the error in 'make dtbs_check': arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: adc@3100: 'adc-chan@0x06' does not match any of the regexes: ... Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: a727ec1232d9 ("arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20191212113540.4.I5f67a5ed7665f658c95447a837cbd0021e1dc689@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripheralsKiran Gunda1-0/+72
Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other PMIC infra modules. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-11-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-11 02:38:00 +0300