Age | Commit message (Collapse) | Author | Files | Lines |
|
Add proper audio routes for onboard analogue microphones AMIC[1345] -
MIC biases and route from TX macro codec to WCD9385 audio codec.
This should bring AMIC1, AMIC2 (headphones), AMIC3, AMIC4 and AMIC5
onboard microphones to work, although was not tested on the hardware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124164505.293202-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
WCD9385 audio codec TX port mapping was copied form HDK8450, but in fact
it is offset by one. Correct it to fix recording via analogue
microphones.
The change is based on QRD8550 and should be correct here as well, but
was not tested on MTP8550.
Cc: stable@vger.kernel.org
Fixes: a541667c86a9 ("arm64: dts: qcom: sm8550-mtp: add WCD9385 audio-codec")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240124164505.293202-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add PM8010 regulator device nodes for sm8550-mtp board.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/20231215-pm8010-regulator-v3-1-1bfc4b7ee5ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the GPU and provide a path for the ZAP blob.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-5-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The pm8550ve can be found with a different SID on SM8650 platforms,
make it configurable.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-3-b25fb781da52@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
|
Specify orientation GPIO in the PMIC GLINK node.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231002-topic-sm8550-upstream-type-c-orientation-v2-3-125410d3ff95@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The second PMR735D PMIC is not always presend on SM8550 based devices,
split the pmr735d.dtsi file in two so boards files can only include the
ones present on the platform.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230831-topic-sm8550-upstream-pmr735d-split-v1-1-98e632636415@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
According to schematics the VCCQ2 supply is not connected and the L3G
regulator instead powers up the controller pads (VDD_PX10). Use correct
supply vdd-hba and drop unsupported current limit for the vdd-hba.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Even though currently there is no consumer for L1B, add the supply
for it anyway.
Fixes: 71342fb91eae ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230801095246.2884770-1-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add nodes to support Type-C USB/DP functionality.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-type-c-v5-5-9221cd300903@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-1-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org
|
|
Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-2-krzysztof.kozlowski@linaro.org
|
|
MDP in sm8550.dtsi is not disabled (although its parent MDSS is), so
board DTS does not have to enable it.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-2-krzysztof.kozlowski@linaro.org
|
|
Enable the Display Clock Controller by default in SoC DTSI so unused
clocks can be turned off. It does not require any external resources,
so as core SoC component should be always available to boards.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-1-krzysztof.kozlowski@linaro.org
|
|
Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-2-krzysztof.kozlowski@linaro.org
|
|
Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-11-552f3b721f9e@linaro.org
|
|
Add the PMIC eUSB2 repeater node and add the usb-repeater
property to the eUSB2 PHY to allow it to be controlled by the
PHY driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-8-abel.vesa@linaro.org
|
|
First, move the pinctrl related propeties out from SoC dtsi and into the
board dts and add blank lines before status properties in the PHY nodes
to be consistent with the rest of the nodes. Then drop the pipe clock
from the controller nodes. Rename the aggre0 and aggre1 clocks to more
generic noc_aggr, and then the cnoc_pcie_sf_axi to cnoc_sf_axi. Add the
cpu-pcie interconnects to both controller nodes. Rename the pcie1 second
reset to link_down and drop the unnecessary enable-gpios. Switch the aux
clock to GCC_PCIE_1_PHY_AUX_CLK for the pcie1 PHY and drop the aux_phy
from clock-names. Also rename the nocsr reset to phy_nocsr. With this
changes we are now in line with the SC8280XP bindings.
Fixes: 7d1158c984d3 ("arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-12-abel.vesa@linaro.org
|
|
Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators.
Fixes: 71342fb91eae ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127121843.349738-1-krzysztof.kozlowski@linaro.org
|
|
Enable USB HC and PHYs nodes on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119004533.1869870-3-abel.vesa@linaro.org
|
|
Enable PCIe controllers and PHYs nodes on SM8550 MTP board.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118230526.1499328-3-abel.vesa@linaro.org
|
|
Add the aDSP, cDSP and MPSS firmware and "Devicetree" firmware paths
for the SM8550 MTP platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115-topic-sm8550-upstream-dts-remoteproc-v3-3-815a1753de34@linaro.org
|
|
Add nodes for the Visionox VTDR6130 found on the SM8550-MTP
device.
TLMM states are also added for the Panel reset GPIO and
Tearing Effect signal for when the panel is running in
DSI Command mode.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104-topic-sm8550-upstream-dts-display-v4-3-1729cfc0e5db@linaro.org
|
|
Enable MDSS/DPU/DSI0 on SM8550-MTP device.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104-topic-sm8550-upstream-dts-display-v4-2-1729cfc0e5db@linaro.org
|
|
Enable UFS host controller and PHY node on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116141000.1831351-2-abel.vesa@linaro.org
|
|
Add dts file for Qualcomm MTP platform which uses SM8550 SoC.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-11-abel.vesa@linaro.org
|