Age | Commit message (Collapse) | Author | Files | Lines |
|
Enable CRU and CSI on RZ/G2UL SMARC EVK and tie the CSI to the OV5645
sensor using a Device Tree overlay.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213141300.159847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add initial support for the Renesas Gray Hawk Single board, which is
based on the R-Car V4M (R8A779H0) SoC:
- Memory,
- Crystal oscillators,
- Serial console.
Based on the White Hawk Single DTS, and on a patch for the Gray Hawk
board stack in the BSP by Hai Pham.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/b657402113267acd57aece0b4c681b707e704455.1706194617.git.geert+renesas@glider.be
|
|
The White Hawk Single board is a single-board integration of the Renesas
White Hawk CPU and Breakout board stack, based on the R-Car V4H ES2.0
(R8A779G2) SoC.
For now, the only visible differences compared to the board stack are:
- The SoC is an updated version of R-Car V4H (R8A779G0),
- The serial console uses an FT2232H instead of a CP2102 USB-UART
bridge, with CTS/RTS wired.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/2b8d37949c17cca170c1d9e97f10a100b20c5cd9.1706192990.git.geert+renesas@glider.be
|
|
The White Hawk CPU board can be used standalone, without connecting it
to the White Hawk BreakOut board.
Add a DTS file for supporting this use case.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/95ac53e7f2bc42402eb411ad7f64a66864a3de01.1706192990.git.geert+renesas@glider.be
|
|
DT overlays in tree need to be applied to a base DTB to validate they
apply, to run schema checks on them, and to catch any errors at compile
time.
Signed-off-by: Rob Herring <robh@kernel.org>
[geert: Add missing base/overlay combinations]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/44e5c1781b012a38d07a8d2fc68b26b33c3558b6.1696945404.git.geert+renesas@glider.be
|
|
Add initial support for the R-Car S4 Starter Kit with R8A779F4
SoC support. Based on a patch in the BSP.
Signed-off-by: Michael Dege <michael.dege@renesas.com>
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87pm1wfn8z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the initial device tree for the Renesas RZ/G3S SMARC EVK board.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-28-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable CRU, CSI on RZ/G2LC SMARC EVK and tie the CSI to the OV5645 sensor
using Device Tree overlay.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230413114016.16068-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable CRU, CSI on RZ/V2L SMARC EVK and tie the CSI to the OV5645 sensor
using Device Tree overlay. RZ/G2L SMARC EVK and RZ/V2L SMARC EVK have the
same connections for connecting the CSI to OV5645 sensor so just reuse
the existing r9a07g044l2-smarc-cru-csi-ov5645.dtso and create a symbolic
link to this file for RZ/V2L SMARC EVK.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230412185608.64628-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable CRU, CSI on RZ/G2L SMARC EVK and tie the CSI to OV5645 sensor
using Device Tree overlay. rz-smarc-cru-csi-ov5645.dtsi is created so
that RZ/G2L alike EVKs can make use of it.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230322125648.24948-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable sci0 node using dt overlay and disable can{0,1}-stb-hog
nodes in DT overlay as its pins are shared with sci0 pins.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230321114753.75038-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add R-Car Sound support for the White Hawk board with the
ARD-AUDIO-DA7212 external audio board, using a DT overlay.
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87o7p5l9t7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds r8a77980A V3H2 (= r8a77980 ES2) Condor-I board
basic support.
Signed-off-by: Andrey Dolnikov <andrey.dolnikov@cogentembedded.com>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1v64nko.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Draak and Ebisu boards support an optional LVDS panel. One
compatible panel is the Mitsubishi AA104XD12. Add a corresponding DT
overlay.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Salvator-X and Salvator-XS boards support an optional LVDS panel.
One compatible panel is the Mitsubishi AA104XD12. Add a corresponding DT
overlay.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add basic support for RZ/V2M EVK (based on R9A09G011):
- memory
- External input clock
- UART
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-13-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Initial support for the Renesas White Hawk CPU and BreakOut boards.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220428135058.597586-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add basic support for RZ/G2UL SMARC EVK (based on R9A07G043U11):
- memory
- External input clock
- CPG
- DMA
- SCIF
It shares the same carrier board with RZ/G2L, but the pin mapping is
different. Disable the device nodes which are not tested and delete the
corresponding pinctrl definitions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220412161314.13800-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add basic support for the RZ/V2L SMARC EVK (based on R9A07G054L2):
- memory
- External input clock
- CPG
- Pin controller
- SCIF
- GbEthernet
- Audio Clock
It shares the same carrier board with RZ/G2L with the same pin mapping.
Delete the gpio-hog nodes from pinctrl as they will be added later when
the functionality has been tested.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110134659.30424-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add basic support for the RZ/G2LC SMARC EVK (based on R9A07G044C2):
- memory
- External input clock
- SCIF
- GbEthernet
- Audio Clock
It shares the same carrier board with RZ/G2L, but the pin mapping is
different. Disable the device nodes which are not tested and delete the
corresponding pinctrl definitions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211216114305.5842-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Initial support for the Renesas Spider CPU and BreakOut boards.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Takehito Nakamura <takehito.nakamura.nx@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-14-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for the Renesas Salvator-X 2nd version development board
equipped with an R-Car M3Ne-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/efced5c7ff71b0a0ae359be12112e0d4dfb21a72.1628766192.git.geert+renesas@glider.be
|
|
Add support for the Renesas R-Car Starter Kit Pro and Kingfisher combo
equipped with an R-Car M3e-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/54262b64be6d5c7a7ede3302259e9d15218d48a0.1626708063.git.geert+renesas@glider.be
|
|
Add support for the Renesas R-Car Starter Kit Pro equipped with an R-Car
M3e-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/c566dfa5f07605a467f8705c3a2f637ea445b1ff.1626708063.git.geert+renesas@glider.be
|
|
Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car M3e-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/177666b6ffa0b404e1e45504763dd381107a02f3.1626708063.git.geert+renesas@glider.be
|
|
Add support for the Renesas R-Car Starter Kit Premier and Kingfisher
combo equipped with an R-Car H3e-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/985ad56e9f93d08cf3d1014fbba86ea54beb01e1.1626708063.git.geert+renesas@glider.be
|
|
Add support for the Renesas R-Car Starter Kit Premier equipped with an
R-Car H3e-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/561a01ebeeef3f39f56cdc6ba8533bef222a72f2.1626708063.git.geert+renesas@glider.be
|
|
Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car H3e-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/2a6cc94d27cd87e0231d15c39c5f7cff1e751834.1626708063.git.geert+renesas@glider.be
|
|
Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2):
- memory
- External input clock
- SCIF
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Beacon EmbeddedWorks is introducing a new kit based on the
RZ/G2H SoC from Renesas.
The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.
The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a variety of push buttons and LED's, and support for
a parallel RGB and an LVDS display. It uses the same baseboard
and SOM files as the RZ/G2M and RZ/G2N kits.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-8-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Beacon EmbeddedWorks is introducing a new kit based on the
RZ/G2N SoC from Renesas.
The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.
The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a variety of push buttons and LED's, and support for
a parallel RGB and an LVDS display. It uses the same baseboard
and SOM as the RZ/G2M.
This SOM has only 2GB of DDR, and beacon-renesom-som.dtsi contains
the base memory node, so an additional memory node isn't necessary.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-7-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Create a dedicated DTB for M3-ES3.0 + ULCB + Kingfisher combo.
Inspire from the pre-existing ULCB-KF device trees:
$ ls -1 arch/arm64/boot/dts/renesas/*ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20201029133741.25721-2-erosca@de.adit-jv.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G2N
Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2N board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201020125134.22625-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G2M
Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2M board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201020125134.22625-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G2H
Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2H board.
Common file hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi is created
which will be used by RZ/G2{HMN}, by default the CSI20 node is tied to
ov5645 camera endpoint and the imx219 camera endpoint is tied to CSI40.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20201020125134.22625-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Initial support for the Renesas Falcon CPU and BreakOut boards
support.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599739372-30669-5-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The HiHope RZ/G2H is advertised as compatible with panel idk-1110wr from
Advantech, however the panel isn't sold alongside the board. New dts,
enabling the lvds node to get the panel to work with HiHope RZ/G2H.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200827181918.30130-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Beacon EmebeddedWorks, formerly Logic PD is introducing a new
SOM and development kit based on the RZ/G2M SoC from Renesas.
The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.
The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a variety of push buttons and LED's, and support for
a parallel RGB and an LVDS display.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20200715140622.1295370-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The HiHope RZ/G2H sub board sits below the HiHope RZ/G2H main board.
These boards are identical with the ones for RZ/G2M[N].
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594230511-24790-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Basic support for the HiHope RZ/G2H main board:
- Memory,
- Main crystal,
- Serial console
- eMMC
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594230511-24790-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Make the Makefile for building Renesas DTB files easier to read and
maintain:
- Get rid of line continuations,
- Use a single entry per line,
- Sort SoCs and boards alphabetically,
- Separate SoCs by blank lines.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200706154015.29257-1-geert+renesas@glider.be
|
|
display
The HiHope RZ/G2N variants are advertised as compatible with panel
idk-1110wr from Advantech, however the panel isn't sold alongside the
board. New dts's, enabling the lvds node to get the panel to work with
all the HiHope RZ/G2N variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N Rev.3.0/4.0 main
board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on
r8a774b1 SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for idk-1110wr display as similarly done for Rev.2.0
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0
main board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on
r8a774a1 SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version
so reflect the same for the DTS file names so that the existing naming
convention can be used for Rev.3.0/4.0 boards.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
HiHope RZ/G2M boards
The existing DTS files for HiHope RZ/G2M boards are for Rev.2.0 version
so reflect the same for the DTS file names so that the existing naming
convention can be used for Rev.3.0/4.0 boards.
While at it also added a comment about switch SW43 to be OFF for pciec1
to be activated.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|