Age | Commit message (Collapse) | Author | Files | Lines |
|
Add interrupt-names properties to device nodes that represent ARM
architected timers for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/e5e2767011322daaebcc8dd6ecfcadc6966042d5.1718890849.git.geert+renesas@glider.be
|
|
Add the input capture interrupt on Timer Unit instances that have it.
Add "interrupt-names" properties for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5c70ad8c2ea14333616c5add31a4a958f4a47081.1705325654.git.geert+renesas@glider.be
|
|
Renesas Sound has been using CPG_AUDIO_CLK_I on CPG_CORE for clock,
but this was wrong. Instead, it needs to use CPG_MOD, so clk_i can
handle the "ADG" bit in SMSTPCR9.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> [r8a77965]
Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> [r8a77965]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87y1i3sjoc.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87wmxnsjo7.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87v8d7sjo2.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87ttsrsjnx.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87sf8bsjns.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87r0nvsjnn.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87pm3fsjni.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87o7izsjnd.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87msyjsjn9.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87lee3sjn4.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87jztnsjmy.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87il97sjmu.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h6orsjmp.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87fs4bsjml.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87edjvsjmg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add iommu-map and iommu-map-mask properties to the PCIe host nodes.
Note that iommu-map-mask should be zero because the IPMMU assigns
one micro TLB ID only, to the PCIe host.
Also change the dma-ranges arguments for IOMMU. Note that dma-ranges
can be used if the IOMMU is disabled.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230510090358.261266-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
On several R-Car Gen3(e) SoCs, multiple (up to 4) operating points in
the same cluster are marked with the "turbo-mode" property, which is
meant only for operating points beyond "Normal Mode".
Fix this by dropping the property from all operating points but the
"High Performance" one.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/866d06aec09e5a86dba11970f93a728b3e34e9f5.1675335086.git.geert+renesas@glider.be
|
|
Current sound comment is indicating that #sound-dai-cells is required,
but it is needed only if board is using "simple-card".
Hence tidy up the comments.
As ulcb.dtsi and salvator-common.dtsi are already using "audio-graph",
the unneeded #sound-dai-cells are removed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cz7ji418.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Renesas R-Car CAN-FD Controller on R-Car Gen3 and RZ/G2 SoCs has two
interrupts. Add interrupt-names properties to all CAN-FD device nodes
to identify the individual interrupts, so we can make this property a
required property in the DT bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/10eef1e20372af4a156b06df8e5124666ec7c6b6.1651512451.git.geert+renesas@glider.be
|
|
Endpoints node must have a remote-endpoint property, as endpoints only
exist to model a link between ports. Drop the empty rgb output endpoints
from SoC dtsi files, and declare them in the board dts instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220424161228.8147-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Endpoints node must have a remote-endpoint property, as endpoints only
exist to model a link between ports. Drop the empty lvds endpoints from
SoC dtsi files, they should be instead declared in the board dts or in
overlays.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220424161228.8147-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device nodes for the SPI Multi I/O Bus Controllers (RPC-IF) on the
various R-Car Gen3 SoCs that do not have support for them yet in their
device trees (R-Car H3, M3-W, M3-W+, M3-N, E3, and D3).
Based on patches in the BSP by Valentine Barshak.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/3231749c7b63df1a2134daabe66446a3e0e5515b.1648548339.git.geert+renesas@glider.be
|
|
Driver doesn't use it yet, but let's describe the HW properly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220322095512.4707-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds the MLP device nodes to dtsi files for R-Car Gen3 SoCs
that have it.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20220120051559.746322-1-nikita.yoush@cogentembedded.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Make whitespace and indentation more consistent.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3f2bcae1253c7a31d3eb6755185092a1f2b99b09.1642524439.git.geert+renesas@glider.be
|
|
The binding node names for the thermal zones are not successfully
validated by the dt-schemas.
Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal. Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211104224033.3997504-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Align the node names of device nodes representing operating point v2
tables with the expectations of the DT bindings in
Documentation/devicetree/bindings/opp/opp-v2.yaml.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/ac885456ffb00fa4cc4069b9967761df2c98c3d8.1637764588.git.geert+renesas@glider.be
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211110191610.5664-13-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-14-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-15-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-16-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-17-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-18-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-19-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20211110191610.5664-22-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Correct the voltages in the "Power Optimized" (<= 1.5 GHz) Cortex-A57
operating point table entries for the R-Car M3-W and M3-W+ SoCs from
0.82V to 0.83V, as per the R-Car Gen3 EC Manual Errata for Revision
0.53.
Based on a patch for R-Car M3-W in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.
Fixes: da7e3113344fda50 ("arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices")
Fixes: f51746ad7d1ff6b4 ("arm64: dts: renesas: Add Renesas R8A77961 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b9e9db907514790574429b83d070c823b36085ef.1619699909.git.geert+renesas@glider.be
|
|
Tag the highest "Power Optimized" (1.5 GHz) Cortex-A57 operating point
table entries for the RZ/G2M, R-Car M3-W and M3-W+ SoCs with the
"opp-suspend" property. This makes sure the system will enter suspend
in the same performance state as it will be resumed by the firmware
later, avoiding state inconsistencies after resume.
Based on a patch for R-Car M3-W in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.
Fixes: 800037e815b91d8c ("arm64: dts: renesas: r8a774a1: Add operating points")
Fixes: da7e3113344fda50 ("arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices")
Fixes: f51746ad7d1ff6b4 ("arm64: dts: renesas: Add Renesas R8A77961 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/45a061c3b0463aac7d10664f47c4afdd999da50d.1619699721.git.geert+renesas@glider.be
|
|
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-3-aford173@gmail.com
[geert: Update new r8a779a0.dtsi]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The port@0 is a mandatory port, add or move the declaration to the CSI-2
nodes top declared in dtsi files instead of depending on dts files
adding them when describing the external connection.
This fixes validation warnings for DTB outputs that do not connect all
CSI-2 receivers to transmitters and thus declaring all port@0 nodes in
dts files.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210421150221.3202955-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device nodes for the Timer Unit (TMU) on the Renesas R-Car H3
(r8a77951), M3-W (r8a77960), M3-W+ (r8a77961), M3-N (r8a77965), E3
(r8a77990), and D3 (r8a77995) SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20201210152705.1535156-2-niklas.soderlund+renesas@ragnatech.se
[geert: squashed six commits]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This was wrong, as these are meant solely for the
PHY, not for the MAC. Hence properties were introduced for explicit
configuration of these delays.
Convert the R-Car Gen3 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
properties to the SoC .dtsi files, to be overridden by board files
where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
overrides.
Notes:
- R-Car E3 and D3 do not support TX internal delay handling,
- On R-Car D3, TX internal delay handling must always be enabled,
hence this fixes a bug on Draak,
- On R-Car V3H, RX internal delay handling must always be enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819134344.27813-7-geert+renesas@glider.be
|
|
According to Devicetree Specification v0.2 and later, Section "Generic
Names Recommendation", the node name for a pin controller device node
should be "pinctrl".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200821112433.5652-1-geert+renesas@glider.be
|
|
Fix the device node names as "mmc@".
Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes")
Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree")
Fixes: 77223211f44d ("arm64: dts: renesas: r8a774c0: Add SDHI nodes")
Fixes: d9d67010e0c6 ("arm64: dts: r8a7795: Add SDHI support to dtsi")
Fixes: a513cf1e6457 ("arm64: dts: r8a7796: add SDHI nodes")
Fixes: 111cc9ace2b5 ("arm64: dts: renesas: r8a77961: Add SDHI nodes")
Fixes: f51746ad7d1f ("arm64: dts: renesas: Add Renesas R8A77961 SoC support")
Fixes: df863d6f95f5 ("arm64: dts: renesas: initial R8A77965 SoC device tree")
Fixes: 9aa3558a02f0 ("arm64: dts: renesas: ebisu: Add and enable SDHI device nodes")
Fixes: 83f18749c2f6 ("arm64: dts: renesas: r8a77995: Add SDHI (MMC) support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594382634-13714-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fix IOMMU device node names as "iommu@".
Fixes: 8f507babc617 ("arm64: dts: renesas: r8a774a1: Add IPMMU device nodes")
Fixes: 63093a8e58be ("arm64: dts: renesas: r8a774b1: Add IPMMU device nodes")
Fixes: 6c7e02178e8f ("arm64: dts: renesas: r8a774c0: Add IPMMU device nodes")
Fixes: 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes")
Fixes: e4b9a493df45 ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes")
Fixes: 389baa409617 ("arm64: dts: renesas: r8a7796: Add IPMMU device nodes")
Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes")
Fixes: ce3b52a1595b ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes")
Fixes: a3901e7398e1 ("arm64: dts: renesas: r8a77995: Add IPMMU device nodes")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1587461775-13369-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add reset control properties to the device nodes for the Display Units
on all supported R-Car Gen3 SoCs. Note that on these SoCs, there is
only a single reset for each pair of DU channels.
The display nodes on R-Car V3M and V3H already had "resets" properties,
but lacked the corresponding "reset-names" properties.
Join the clocks lines while at it, to increase uniformity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200218133019.22299-4-geert+renesas@glider.be
|
|
Add device nodes for the CryptoCell instances on the various Renesas
R-Car Gen3 SoCs that do not have support for them yet in their device
trees (M3-W, M3-W+, M3-N, E3, D3).
The R-Car H3 device tree already supports this device.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200124133330.16121-1-geert+renesas@glider.be
|
|
The Renesas-specific "vsps" property lacks a vendor prefix.
Add a "renesas," prefix to comply with DT best practises.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20191105183504.21447-4-geert+renesas@glider.be
|
|
To improve human readability and enable automatic validation, the tuples
in the "ranges" and "dma-ranges" properties of PCI device nodes should
be grouped.
Fix this by grouping the tuples of the "ranges" and "dma-ranges"
properties using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213164115.3697-8-geert+renesas@glider.be
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
|
|
To improve human readability and enable automatic validation, the tuples
in the various properties containing interrupt specifiers should be
grouped. While "make dtbs_check" does not impose this yet for the
"interrupts" property, it does for the "interrupt-map" property.
Fix this by grouping the tuples of the "interrupts" and "interrupt-map"
properties using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213164115.3697-7-geert+renesas@glider.be
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
|
|
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit
39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car
M3-W"), to avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+
(R8A77961).
Rename the DTS files as well, for consistency.
Note that DT binding headers, definitions, and compatible values were
not renamed, to preserve backward compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211131311.23661-1-geert+renesas@glider.be
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
|