summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-03-16arm64: dts: renesas: condor: Add I2C EEPROM for PMICGeert Uytterhoeven1-0/+8
Add a device node for the I2C EEPROM which serves as external storage for the PMIC setup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/84971f48eca0b696f592a922268af8c150d9bae3.1678375464.git.geert+renesas@glider.be
2022-09-02arm64: dts: renesas: Add condor-common.dtsiKuninori Morimoto1-539/+1
We have V3H Condor board, and will have V3H2 Condor-I board. This patch adds condor-common.dtsi to share the common settings between these boards. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-29arm64: dts: renesas: r8a77980: Put I2C aliases to board filesWolfram Sang1-0/+6
I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220825071022.7864-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-24arm64: dts: renesas: condor: Enable MAX9286Jacopo Mondi1-0/+191
Enable the MAX9286 GMSL deserializers on Condor-V3H board. Connected cameras should be defined in a device-tree overlay or included after these definitions. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20211216163439.139579-5-jacopo+renesas@jmondi.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-28arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resetsGeert Uytterhoeven1-0/+2
Describe all Ethernet PHY reset GPIOs on R-Car Gen3 boards, to avoid relying solely on boot loaders to bring PHYs out of reset. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3e6fd765850e8ef0980d8e98bc5f2126538d626f.1631177442.git.geert+renesas@glider.be
2021-09-28arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYsGeert Uytterhoeven1-0/+2
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on R-Car Gen3 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: rcar-gen3: Add SoC model to comment headersGeert Uytterhoeven1-1/+1
Make sure the R-Car Gen3 SoC model present is documented in the comment header of each board DTS, on a single line. This makes it easier to identify boards that are available with different SoC or SiP options. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/251569665d7d4f4ed4bbab7267ce2ddccdef33e5.1626261816.git.geert+renesas@glider.be
2021-05-25arm64: dts: renesas: condor: Switch eMMC bus to 1V8Wolfram Sang1-7/+1
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND array and the VCCQ supplies the bus. On Condor, the VCC is connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux to match the bus, which is always operating in 1.8V mode. While at it, deduplicate the pinmux entries, which are now the same for both default and UHS modes. We still need the two pinctrl entries to match the bindings though. Thanks to Marek Vasut for this description from commit 5f65328df3f5cd25 ("arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210419143858.39401-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-25arm64: dts: renesas: Disable SD functions for plain eMMCWolfram Sang1-0/+2
Some SDHI instances are solely used for eMMC. Disable SD and SDIO for faster initialization. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Adam Ford <aford173@gmail.com> (beacon) Link: https://lore.kernel.org/r/20210119133322.87289-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-13arm64: dts: renesas: r8a77980: condor/v3hsk: Add QSPI flash supportSergei Shtylyov1-0/+67
Define the Condor/V3HSK board dependent parts of the RPC-IF device node. Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it. Based on the original patches by Dmitry Shifrin. Signed-off-by: Dmitry Shifrin <dmitry.shifrin@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/322ca212-a45f-cd2c-f1eb-737f0aa42d22@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-15arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo1-2/+0
Small fixes to make these DTs compliant with the adi,adv7511w binding. r8a77970-eagle.dts, r8a77970-v3msk.dts, r8a77980-condor.dts, r8a77980-v3hsk.dts, r8a77990-ebisu.dts: Remove the adi,input-style and adi,input-justification properties. r8a77995-draak.dts: Reorder the I2C slave addresses of the hdmi-encoder@39 node and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-2-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-05arm64: dts: renesas: r8a77980: condor: Sort nodesYoshihiro Kaneko1-21/+21
Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting the group alphabetically. Else * Sort alphabetically This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-05arm64: dts: renesas: condor: switch from EtherAVB to GEtherSergei Shtylyov1-23/+24
The "official" Condor boards have always been wired to mount NFS via GEther, not EtherAVB -- the boards resoldered for EtherAVB were local to Cogent Embedded, so we've been having an unpleasant situation where a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY extension board is plugged in). Switch from EtherAVB to GEther at last! Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-13arm64: dts: renesas: condor: add PCIe supportSergei Shtylyov1-0/+12
Enable PCIe PHY and PCIEC and specify the PCIe bus clock for the Condor board. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-13arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI supportSergei Shtylyov1-0/+106
Define the Condor/V3HSK board dependent parts of the DU and LVDS device nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and Analog Devices ADV7511W HDMI transmitter... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27arm64: dts: renesas: r8a77980: add RWDT supportSergei Shtylyov1-0/+5
Describe RWDT in the R8A77980 SoC device tree. Enable RWDT on the Condor and V3H Starter Kit boards. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-25arm64: dts: renesas: condor/v3hsk: specify Ethernet PHY IRQsSergei Shtylyov1-0/+2
Specify Ethernet PHY IRQs in the Condor/V3HSK board device trees, now that we have the GPIO support (previously phylib had to resort to polling). Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-25arm64: dts: renesas: condor: add I2C0 supportSergei Shtylyov1-0/+27
Define the Condor board dependent part of the I2C0 device node. The I2C0 bus is populated by 2 ON Semiconductor PCA9654 I/O expanders and Analog Devices ADV7511W HDMI transmitter (but we're only describing the former chips now). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: condor: add CAN-FD supportSergei Shtylyov1-0/+15
Define the Condor board dependent part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: condor: add eMMC supportSergei Shtylyov1-0/+43
Define the Condor board dependent part of the MMC0 (connected to eMMC chip) device node along with the necessary voltage regulators... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: condor: add EtherAVB pinsSergei Shtylyov1-0/+8
Add the (previously omitted) EtherAVB pin data to the Condor board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: condor: add SCIF0 pinsSergei Shtylyov1-0/+15
Add the (previously omitted) SCIF0 pin data to the Condor board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: condor: add EtherAVB supportSergei Shtylyov1-0/+13
Define the Condor board dependent part of the EtherAVB device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: initial Condor board device treeSergei Shtylyov1-0/+45
Add the initial device tree for the R8A77980 SoC based Condor board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: correct memory size to 0x78000000 (2GiB)] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 12:17:41 +0300