summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-10-05arm64: dts: renesas: ebisu: Document Ebisu-4D supportWolfram Sang1-1/+1
Document properly that Ebisu-support includes the Ebisu-4D variant, so there won't be confusion what happened with support for this board. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231004152751.3917-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-20arm64: dts: renesas: Factor out Ebisu board supportGeert Uytterhoeven1-787/+1
Move the common parts for the Renesas Ebisu board to ebisu.dtsi, to avoid future duplication of board descriptions. Change a reference in a comment from "r8a77990" to "R-Car E3(e)", to prepare for the advent of "R-Car E3e". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/df275772dea0a4fa88d1bffa96ce048eaa7d5308.1628766192.git.geert+renesas@glider.be
2021-07-30arm64: dts: renesas: rcar-gen3: Add SoC model to comment headersGeert Uytterhoeven1-1/+1
Make sure the R-Car Gen3 SoC model present is documented in the comment header of each board DTS, on a single line. This makes it easier to identify boards that are available with different SoC or SiP options. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/251569665d7d4f4ed4bbab7267ce2ddccdef33e5.1626261816.git.geert+renesas@glider.be
2021-07-19arm64: dts: renesas: r8a77990: ebisu: Add I2C EEPROM for PMICGeert Uytterhoeven1-0/+6
Add a device node for the I2C EEPROM which serves as external storage for the PMIC setup, as a backup of the internal OTP configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/32443cd203ce2787d9a719d06a473b9e9cd508c2.1625489160.git.geert+renesas@glider.be
2021-07-19arm64: dts: renesas: r8a77990: ebisu: Add SW4 supportMagnus Damm1-0/+42
Add support for SW4 via "gpio-keys" on the R-Car E3 Ebisu board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Link: https://lore.kernel.org/r/162416649714.11444.12659951671817146236.sendpatchset@octo Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-04-27arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsiNiklas Söderlund1-2/+0
The port@0 is a mandatory port, add or move the declaration to the CSI-2 nodes top declared in dtsi files instead of depending on dts files adding them when describing the external connection. This fixes validation warnings for DTB outputs that do not connect all CSI-2 receivers to transmitters and thus declaring all port@0 nodes in dts files. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210421150221.3202955-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-08arm64: dts: renesas: Add mmc aliases into board dts filesYoshihiro Shimoda1-0/+3
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14"), the order of /dev/mmcblkN was not fixed in some SoCs which have multiple sdhi controllers. So, we were hard to use an sdhi device as rootfs by using the kernel parameter like "root=/dev/mmcblkNpM". According to the discussion on a mainling list [1], we can add mmc aliases to fix the issue. So, add such aliases into Renesas arm64 board dts files. Notes that mmc0 is an eMMC channel if available. [1] https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/ Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1614596786-22326-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-08arm64: dts: renesas: Group tuples in pin control propertiesGeert Uytterhoeven1-1/+1
To improve human readability and enable automatic validation, the tuples in "pinctrl-*" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-6-geert+renesas@glider.be
2021-03-08arm64: dts: renesas: Group tuples in playback and capture propertiesGeert Uytterhoeven1-2/+2
To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-5-geert+renesas@glider.be
2021-01-25arm64: dts: renesas: Disable SD functions for plain eMMCWolfram Sang1-0/+2
Some SDHI instances are solely used for eMMC. Disable SD and SDIO for faster initialization. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Adam Ford <aford173@gmail.com> (beacon) Link: https://lore.kernel.org/r/20210119133322.87289-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15arm64: dts: renesas: Drop superfluous pin configuration containersGeert Uytterhoeven1-4/+2
As the pin configuration child nodes for EtherAVB on the Draak and Ebisu boards contain only a single configuration, there is no need to wrap them in additional grandchild containers. Hence remove the superfluous level. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200819123910.19606-1-geert+renesas@glider.be
2020-07-17arm64: dts: renesas: add full-pwr-cycle-in-suspend into eMMC nodesYoshihiro Shimoda1-0/+1
Add full-pwr-cycle-in-suspend property to do a graceful shutdown of the eMMC device in system suspend. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382612-13664-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-15arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo1-2/+0
Small fixes to make these DTs compliant with the adi,adv7511w binding. r8a77970-eagle.dts, r8a77970-v3msk.dts, r8a77980-condor.dts, r8a77980-v3hsk.dts, r8a77990-ebisu.dts: Remove the adi,input-style and adi,input-justification properties. r8a77995-draak.dts: Reorder the I2C slave addresses of the hdmi-encoder@39 node and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-2-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-20arm64: dts: renesas: r8a77990: ebisu: Remove clkout-lr-synchronous from soundKuninori Morimoto1-1/+0
rcar_sound doesn't support clkout-lr-synchronous in upstream. It was supported under out-of-tree rcar_sound. upstream rcar_sound is supporting - clkout-lr-synchronous + clkout-lr-asynchronous Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mubt3tux.wl-kuninori.morimoto.gx@renesas.com Fixes: 56629fcba94c698d ("arm64: dts: renesas: ebisu: Enable Audio") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-20arm64: dts: renesas: Group tuples in regulator-gpio states propertiesGeert Uytterhoeven1-4/+2
To improve human readability and enable automatic validation, the tuples in the "states" properties of device nodes compatible with "regulator-gpio" should be grouped, as reported by "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: Additional items are not allowed (1800000, 0 were unexpected) arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: [3300000, 1, 1800000, 0] is too long ... Fix this by grouping the tuples using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-6-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-08-19arm64: dts: renesas: ebisu, draak: Limit EtherAVB to 100MbpsSimon Horman1-0/+8
* According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of August 24, 2018, the TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) and D3 (r8a77995). * TX clock internal delay mode is required for reliable 1Gbps communication using the KSZ9031RNX phy present on the Ebisu and Draak boards. Thus, the E3 based Ebisu and D3 based Draak boards can not reliably use 1Gbps and the speed should be limited to 100Mbps. Based on work by Kazuya Mizuguchi. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-05arm64: dts: renesas: r8a77990: ebisu: Sort nodesYoshihiro Kaneko1-104/+104
Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting the group alphabetically. Else * Sort alphabetically This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> [geert: Sort sound child nodes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-06arm64: dts: renesas: ebisu: Remove renesas, no-ether-link propertyTakeshi Kihara1-1/+0
It is incorrect to specify the no-ether-link property for the AVB device on the Ebisu board. This is because the property should only be used when a board does not provide a proper AVB_LINK signal. However, the Ebisu board does provide this signal. As per 87c059e9c39d ("arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property") this fixes a bug: Steps to reproduce: - start AVB TX stream (Using aplay via MSE), - disconnect+reconnect the eth cable, - after a reconnection the eth connection goes iteratively up/down without user interaction, - this may heal after some seconds or even stay for minutes. As the documentation specifies, the "renesas,no-ether-link" option should be used when a board does not provide a proper AVB_LINK signal. There is no need for this option enabled on RCAR H3/M3 Salvator-X/XS and ULCB starter kits since the AVB_LINK is correctly handled by HW. Choosing to keep or remove the "renesas,no-ether-link" option will have impact on the code flow in the following ways: - keeping this option enabled may lead to unexpected behavior since the RX & TX are enabled/disabled directly from adjust_link function without any HW interrogation, - removing this option, the RX & TX will only be enabled/disabled after HW interrogation. The HW check is made through the LMON pin in PSR register which specifies AVB_LINK signal value (0 - at low level; 1 - at high level). In conclusion, the present change is also a safety improvement because it removes the "renesas,no-ether-link" option leading to a proper way of detecting the link state based on HW interrogation and not on software heuristic. Fixes: 8441ef643d7d ("arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB") Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-06arm64: dts: renesas: Use ip=on for bootargsMagnus Damm1-1/+1
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-27arm64: dts: renesas: Update Ebisu and Draak bootargsMagnus Damm1-1/+1
Update Ebisu and Draak bootargs to match other boards Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power configSimon Horman1-0/+2
On Ebisu the DDR0 power rail needs to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW23) is a toggle switch, hence specify "rohm,rstbmode-level". Based on advice from Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-03-18arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMICTakeshi Kihara1-0/+25
This patch adds the regulator definition required for operation of S2RAM. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-03-18arm64: dts: renesas: ebisu: Enable VIN5Takeshi Kihara1-0/+4
Both VIN4 and VIN5 are connected to CSI40 and can be configured at runtime to use the single video source connected to CSI40. Enable VIN5 to allow it to be used in this fashion. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Niklas: rewrite commit message] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: ebisu: Fix adv7482 hexadecimal register addressTakeshi Kihara1-1/+1
The register address used for the reg property of the adv7482 node in other Renesas device trees are decimal not hex, change this for Ebisu to align it with the others. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Niklas: rewrite commit message] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: r8a77990: ebisu: Enable LVDS1 encoderLaurent Pinchart1-0/+7
The LVDS1 encoder must supply a pixel clock to the DU for the DPAD output when the LVDS0 encoder is used. Enable it despite its output not being connected. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: r8a77990: Fix SPDX license identifier styleGeert Uytterhoeven1-1/+1
According to Documentation/process/license-rules.rst, SPDX license identifiers in DTS files should use C++ style comments. Fixes: f37a7767f6c4ec66 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") Fixes: 77049191b24b4586 ("arm64: dts: renesas: Add Renesas Ebisu board support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18arm64: dts: renesas: r8a77990: ebisu: Add GPIO expanderGeert Uytterhoeven1-0/+9
Describe the ON Semiconductor PCA9654 I/O expander on the first I2C bus, which provides 8 extra GPIOs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3Simon Horman1-0/+1
Enable HS400 of SDHI3 using the corresponding DT property. No further changes are required. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-01-23arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numberingMarek Vasut1-1/+1
There are two regulator1 nodes in the Ebisu DTS right now, one 3.3V for the eMMC and one 12V for the backlight. This causes one to be overwritten by the other, ultimatelly resulting in inoperable eMMC, which depends on the former. Fix this by renumbering the backlight regulator to regulator2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Simon Horman <horms+renesas@verge.net.au> Fixes: 9d16c4a10e07 ("arm64: dts: renesas: r8a77990: ebisu: Add backlight") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990-ebisu: use simple-audio-cardKuninori Morimoto1-4/+1
Current Ebisu board is using simple-scu-audio-card which is used for Sampling Rate Convert, or MIXer, etc. But, Ebisu is not using such feature. Then, simple-audio-card is very enough. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a77990: ebisu: Fix EthernetAVB phy mode to rgmiiKazuya Mizuguchi1-1/+0
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of August 24, 2018, the TX clock internal delay mode doesn't support on R-Car E3. This patch fixes EthernetAVB phy mode to rgmii. This is achieved by simply dropping the phy-mode property from r8a77990-ebisu.dts as the default property for this for r8a77990, as set in r8a77990.dtsi, is "rgmii". Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-01-07arm64: dts: renesas: r8a77990: ebisu: Add backlightLaurent Pinchart1-0/+19
Add the backlight device for the LVDS1 output, in preparation for panel support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-23arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodesMarek Vasut1-0/+15
This patch adds CAN0,1 and CANFD device nodes for the r8a77990 SoC and enables CANFD connected to CN10 on the E3 Ebisu board using the R8A77990 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-19arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device nodeTakeshi Kihara1-0/+8
This patch adds PCI express channel 0 device node to the R8A77990 SoC and enables PCIEC0 PCI express controller on the Ebisu board. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-08arm64: dts: renesas: ebisu: Add and enable SDHI device nodesTakeshi Kihara1-0/+130
This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC and enables SD card slot connected to SDHI0, micro SD card slot connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board using the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-08arm64: dts: renesas: ebisu: Add serial console pinsTakeshi Kihara1-0/+8
This patch adds pin control for SCIF2 on R8A77990 E3 Ebisu. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: ebisu: Enable AudioTakeshi Kihara1-0/+127
This patch enables Audio for the Ebisu board on R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a7799{0|5}: add/enable USB2.0 peripheralYoshihiro Shimoda1-1/+20
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards. R-Car E3 Ebisu board connects the ID pin to the SoC, so this adds a group "usb0_id" into usb0_pins node. Also, to use SW15 pin 3 side, this patch adds vbus0_usb2 node on r8a77990-ebisu.dts. R-Car D3 Draak board doesn't connect the ID pin, so this adds "renesas,no-otg-pins" property into usb2_phy0 node. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: add/enable USB3.0 peripheral device nodeYoshihiro Shimoda1-0/+5
This patch adds/enables USB3.0 peripheral device node for r8a77990 ebisu board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-26arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputsLaurent Pinchart1-0/+162
Add the LVDS decoder, HDMI encoder, VGA encoder and HDMI and VGA connectors, and wire up the display-related nodes with clocks, pinmux and regulators. The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and EXTAL externals clocks. Two of them are provided to the SoC on the Ebisu board, hook them up in DT. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-17arm64: dts: renesas: ebisu: Add HDMI and CVBS inputJacopo Mondi1-0/+86
Add HDMI and CVBS inputs device nodes to R-Car E3 Ebisu board. Both HDMI and CVBS inputs are connected to an ADV7482 video decoder hooked to the SoC CSI-2 receiver port. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-11arm64: dts: renesas: r8a77990: Enable PWM for Ebisu boardYoshihiro Shimoda1-0/+24
This patch adds PWM device nodes and enables PWM3 and PWM5 for R-Car E3 Ebisu board. These devices are used for backlight control. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-20arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu boardYoshihiro Shimoda1-0/+12
This patch adds and USB3.0 host device node and enable it for R-Car E3 Ebisu board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-25arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu boardYoshihiro Shimoda1-0/+20
This patch adds USB2.0 PHY and Host(EHCI/OHCI) nodes and enables them for R-Car E3 Ebisu board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-25arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timerTakeshi Kihara1-0/+5
Add a device node for the Watchdog Timer (WDT) controller on the R8A77990 SoC, and enable the watchdog on the Ebisu board. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Squashed 2 commits] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVBYoshihiro Shimoda1-0/+28
This patch enables EthernetAVB for r8a77990 Ebisu board. Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: Add Renesas Ebisu board supportTakeshi Kihara1-0/+37
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: rebase and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-26 23:45:56 +0300