| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into for-next
i.MX fixes for 6.9, round 2:
- Fix i.MX8MP the second CSI2 assigned-clock property which got wrong by
commit f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF
to CLK_24M")
- Correct USB over-current polarity for imx6ull-tarragon board
* tag 'imx-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
Link: https://lore.kernel.org/r/ZioopqscxwUOwQkf@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next
MediaTek ARM64 DTS fixes for v6.9
This fixes some dts validation issues against bindings for multiple SoCs,
GPU voltage constraints for Chromebook devices, missing gce-client-reg
on various nodes (performance issues) on MT8183/92/95, and also fixes
boot issues on MT8195 when SPMI is built as module.
* tag 'mtk-dts64-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt2712: fix validation errors
arm64: dts: mediatek: mt7986: prefix BPI-R3 cooling maps with "map-"
arm64: dts: mediatek: mt7986: drop invalid thermal block clock
arm64: dts: mediatek: mt7986: drop "#reset-cells" from Ethernet controller
arm64: dts: mediatek: mt7986: drop invalid properties from ethsys
arm64: dts: mediatek: mt7622: drop "reset-names" from thermal block
arm64: dts: mediatek: mt7622: fix ethernet controller "compatible"
arm64: dts: mediatek: mt7622: fix IR nodename
arm64: dts: mediatek: mt7622: fix clock controllers
arm64: dts: mediatek: mt8186-corsola: Update min voltage constraint for Vgpu
arm64: dts: mediatek: mt8183-kukui: Use default min voltage for MT6358
arm64: dts: mediatek: mt8195-cherry: Update min voltage constraint for MT6315
arm64: dts: mediatek: mt8192-asurada: Update min voltage constraint for MT6315
arm64: dts: mediatek: cherry: Describe CPU supplies
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex1
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex
arm64: dts: mediatek: mt8195: Add missing gce-client-reg to vpp/vdosys
arm64: dts: mediatek: mt8192: Add missing gce-client-reg to mutex
arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into for-next
Qualcomm Arm64 DeviceTree fixes for v6.9
This corrects the watchdog IRQ flags for a number of remoteproc
instances, which otherwise prevents the driver from probe in the face of
a probe deferral.
Improvements in other areas, such as USB, have made it possible for CX
rail voltage on SC8280XP to be lowered, no longer meeting requirements
of active PCIe controllers. Necessary votes are added to these
controllers.
The MSI definitions for PCIe controllers in SM8450, SM8550, and SM8650
was incorrect, due to a bug in the driver. As this has now been fixed
the definition needs to be corrected.
Lastly, the SuperSpeed PHY irq of the second USB controller in SC8180x,
and the compatible string for X1 Elite domain idle states are corrected.
* tag 'qcom-arm64-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
Link: https://lore.kernel.org/r/20240420161002.1132240-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into for-next
* 'v6.9-armsoc/dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
arm64: dts: rockchip: Designate the system power controller on QuartzPro64
arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou
arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
arm64: dts: rockchip: fix alphabetical ordering RK3399 puma
arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma
arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
Link: https://lore.kernel.org/r/3413596.CbtlEUcBR6@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The first CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT,
the second CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT,
both clock are supplied from SYS_PLL2 and configured using assigned-clock DT
properties. Each CSI2 DT node configures its IMX8MP_CLK_MEDIA_CAMn_PIX_ROOT
clock. This used to be the case until likely a copy-paste error in commit
f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M")
which changed the second CSI2 node to configure IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT
using its assigned-clocks property.
Fix the second CSI2 assigned-clock property back to the original correct
IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT .
Fixes: f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The correct compatible string for a USB interface node begins with
"usbif", not "usb". Fix the Rockchip RK3399 based Kobol Helios64 board.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240412204405.3703638-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
|
|
The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as
Name (_CRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
{
0x000000AA,
}
Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
{
0x000000A7, // hs_phy_irq: &intc GIC_SPI 136
}
Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
{
0x00000228, // ss_phy_irq: &pdc 40
}
Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
{
0x0000020A, // dm_hs_phy_irq: &pdc 10
}
Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
{
0x0000020B, // dp_hs_phy_irq: &pdc 11
}
})
Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).
Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240328022224.336938-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Fixes: a33a532b3b1e ("arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-3-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Fixes: 114990ce3edf ("arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-2-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.
But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.
Cc: stable@vger.kernel.org # 6.3: bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab56f16 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-1-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing PCIe CX performance level votes to avoid relying on
other drivers (e.g. USB or UFS) to maintain the nominal performance
level required for Gen3 speeds.
Fixes: 813e83157001 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Cc: stable@vger.kernel.org # 6.2
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240306095651.4551-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The compatible's for the cluster/domain idle states of x1e80100
are wrong, fix it.
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240317132918.1068817-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The code in qcom_q6v5_init() requests the "wdog" IRQ as
IRQF_TRIGGER_RISING. If dt defines the interrupt type as LEVEL_HIGH then
the driver will have issues getting the IRQ again after probe deferral
with an error like:
irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
Fix that by updating the devicetrees to use IRQ_TYPE_EDGE_RISING for
these interrupts, as is already used in most dt's. Also the driver was
already using the interrupts with that type.
Fixes: 3658e411efcb ("arm64: dts: qcom: sc7280: Add ADSP node")
Fixes: df62402e5ff9 ("arm64: dts: qcom: sc7280: Add CDSP node")
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8eb5287e8a42 ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Fixes: 23a8903785b9 ("arm64: dts: qcom: sm8250: Add remoteprocs")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240219-remoteproc-irqs-v1-1-c5aeb02334bd@fairphone.com
[bjorn: Added fixes references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.
Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.
Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. This property looks
like some real hardware, just described wrongly. Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.
This fixes dtbs_check warning:
rk3568-lubancat-2.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. This property looks
like some real hardware, just described wrongly. Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.
This fixes dtbs_check warning:
rk3566-lubancat-1.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There is no "pcie-reset-suspend" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. Drop the property,
but leave the comment, because it might be useful for someone.
This fixes dtbs_check warning:
rk3399-gru-scarlet-dumo.dtb: pcie@f8000000: Unevaluated properties are not allowed ('pcie-reset-suspend' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
orangepi-5-plus
Mark the PMIC as system power controller, so the board will shut-down
properly and fix the typo on rk806_dvs1_null pins property.
Fixes: 236d225e1ee7 ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240407173210.372585-1-efectn@6tel.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Designate the primary RK806 PMIC on the Pine64 QuartzPro64 as the system
power controller, so the board shuts down properly on poweroff(8).
Fixes: 152d3d070a9c ("arm64: dts: rockchip: Add QuartzPro64 SBC device tree")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/c602dfb3972a0844f2a87b6245bdc5c3378c5989.1712512497.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
1. Fixup infracfg clock controller binding
It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl
This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240301074741.8362-1-zajec5@gmail.com
[Angelo: Added Fixes tags]
Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal-zones: cpu-thermal:cooling-maps: 'cpu-active-high', 'cpu-active-low', 'cpu-active-med' do not match any of the regexes: '^map[-a-zA-Z0-9]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213061459.17917-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Thermal block uses only two clocks. Its binding doesn't document or
allow "adc_32k". Also Linux driver doesn't support it.
It has been additionally verified by Angelo by his detailed research on
MT7981 / MT7986 clocks (thanks!).
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal@1100c800: clocks: [[4, 27], [4, 44], [4, 45]] is too long
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal@1100c800: clock-names: ['therm', 'auxadc', 'adc_32k'] is too long
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: 0a9615d58d04 ("arm64: dts: mt7986: add thermal and efuse")
Cc: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/linux-devicetree/17d143aa-576e-4d67-a0ea-b79f3518b81c@collabora.com/
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Ethernet block doesn't include or act as a reset controller.
Documentation also doesn't document "#reset-cells" for it.
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: ethernet@15100000: Unevaluated properties are not allowed ('#reset-cells' was unexpected)
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
Fixes: 082ff36bd5c0 ("arm64: dts: mediatek: mt7986: introduce ethernet nodes")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Mediatek ethsys controller / syscon binding doesn't allow any subnodes
so "#address-cells" and "#size-cells" are redundant (actually:
disallowed).
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: syscon@15000000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
Fixes: 1f9986b258c2 ("arm64: dts: mediatek: add clock support for mt7986a")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
can1_lpcg: clock-controller@5ace0000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>, // 1 4
<&dma_ipg_clk>; // 2 5
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver
&flexcan2 {
clocks = <&can1_lpcg 1>, <&can1_lpcg 0>;
^^ ^^
Should be:
clocks = <&can1_lpcg IMX_LPCG_CLK_4>, <&can1_lpcg IMX_LPCG_CLK_0>;
};
Arg0 is divided by 4 in lpcg driver. So flexcan get IMX_SC_PM_CLK_PER by
<&can1_lpcg 1> and <&can1_lpcg 0>. Although function work, code logic is
wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org
Fixes: be85831de020 ("arm64: dts: imx8qm: add can node in devicetree")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
can0_lpcg: clock-controller@5acd0000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, // 0 0
<&dma_ipg_clk>, // 1 4
<&dma_ipg_clk>; // 2 5
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
}
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
flexcan1: can@5a8d0000 {
clocks = <&can0_lpcg 1>, <&can0_lpcg 0>;
^^ ^^
Should be:
clocks = <&can0_lpcg IMX_LPCG_CLK_4>, <&can0_lpcg IMX_LPCG_CLK_0>;
};
Arg0 is divided by 4 in lpcg driver. flexcan driver get IMX_SC_PM_CLK_PER
by <&can0_lpcg 1> and <&can0_lpcg 0>. Although function can work, code
logic is wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 5e7d5b023e03 ("arm64: dts: imx8qxp: add flexcan in adma")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
adc0_lpcg: clock-controller@5ac80000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, // 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
adc0: adc@5a880000 {
clocks = <&adc0_lpcg 0>, <&adc0_lpcg 1>;
^^ ^^
clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, <&adc0_lpcg IMX_LPCG_CLK_4>;
Arg0 is divided by 4 in lpcg driver. So adc get IMX_SC_PM_CLK_PER by
<&adc0_lpcg 0>, <&adc0_lpcg 1>. Although function can work, code logic is
wrong. Fix it by using correct indices.
Cc: stable@vger.kernel.org
Fixes: 1db044b25d2e ("arm64: dts: imx8dxl: add adc0 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
adma_pwm_lpcg: clock-controller@5a590000 {
... col1 col2
clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
adma_pwm: pwm@5a190000 {
...
clocks = <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>;
^^ ^^
Should be
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
};
Arg0 will be divided by 4 in lcpg driver, so pwm will get IMX_SC_PM_CLK_PER
by <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>. Although function can work, code
logic is wrong. Fix it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: f1d6a6b991ef ("arm64: dts: imx8qxp: add adma_pwm in adma")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
spi0_lpcg: clock-controller@5a400000 {
... Col0 Col1
clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,// 0 1
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
lpspi0: spi@5a000000 {
...
clocks = <&spi0_lpcg 0>, <&spi0_lpcg 1>;
^ ^
Should be:
clocks = <&spi0_lpcg IMX_LPCG_CLK_0>, <&spi0_lpcg IMX_LPCG_CLK_4>;
};
Arg0 is divided by 4 in lpcg driver. <&spi0_lpcg 0> and <&spi0_lpcg 1> are
IMX_SC_PM_CLK_PER. Although code can work, code logic is wrong. It should
use IMX_LPCG_CLK_0 and IMX_LPCG_CLK_4 for lpcg arg0.
Cc: stable@vger.kernel.org
Fixes: c4098885e790 ("arm64: dts: imx8dxl: add lpspi support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 {
... // Col1 Col2
clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4
<&lsio_bus_clk>, // 3 5
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
<IMX_LPCG_CLK_6>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
pwm1 {
....
clocks = <&pwm1_lpcg 4>, <&pwm1_lpcg 1>;
^^ ^^
should be:
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, <&pwm1_lpcg IMX_LPCG_CLK_1>;
};
Arg0 is divided by 4 in lpcg driver, so index 0 and 1 will be get by pwm
driver, which are same as IMX_LPCG_CLK_6 and IMX_LPCG_CLK_1. Even it can
work, but code logic is wrong. Fixed it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: 23fa99b205ea ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Binding doesn't specify "reset-names" property and Linux driver also
doesn't use it.
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected)
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: ethernet@1b100000: compatible: ['mediatek,mt7622-eth', 'mediatek,mt2701-eth', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
(and other complains about wrong clocks).
Fixes: 5f599b3a0bb8 ("arm64: dts: mt7622: add ethernet device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-4-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
1. Drop unneeded "syscon"s (bindings were updated recently)
2. Use "clock-controller" in nodenames
3. Add missing "#clock-cells"
Fixes: d7167881e03e ("arm64: dts: mt7622: add clock controller device nodes")
Fixes: e9b65ecb7c30 ("arm64: dts: mediatek: mt7622: introduce nodes for Wireless Ethernet Dispatch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so update the minimum voltage constraint from 600000 uV to
500000 uV as listed on the mt6366 datasheet.
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-5-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so removing the definition in mt8183-kukui to use the default
minimum voltage (500000 uV) defined in mt6358.dtsi.
Fixes: 31c6732da9d5 ("arm64: dts: mediatek: mt8183-kukui: Override vgpu/vsram_gpu constraints")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-4-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 625000 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 260c04d425eb ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-3-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 606250 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-2-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Describe in each CPU node the regulator supplying it.
Fixes: 260c04d425eb ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240110142305.755367-2-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the mutex1 node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: 92d2c23dc269 ("arm64: dts: mt8195: add display node for vdosys1")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-4-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b852ee68fd72 ("arm64: dts: mt8195: Add display node for vdosys0")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-3-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the vppsys and
vdosys nodes to allow them to use the GCE. This prevents the "can't
parse gce-client-reg property" error from being printed and should
result in better performance.
Fixes: 6aa5b46d1755 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-2-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b4b75bac952b ("arm64: dts: mt8192: Add display nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-1-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
mfgcfg clock is under MFG_ASYNC power domain.
Fixes: e526c9bc11f8 ("arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile")
Fixes: 37fb78b9aeb7 ("arm64: dts: mediatek: Add mt8183 power domains controller")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240223091122.2430037-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Panel port does not have "reg", thus it should not have unit address, as
reported by dtc W=1 warning:
rk3399-gru-scarlet.dtsi:666.32-668.7: Warning (unit_address_vs_reg): /dsi@ff960000/panel@0/ports/port@1/endpoint@1: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240401140939.97808-1-krzk@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Remove a redundant node from the Pine64 Pinebook Pro dts, which is intended
to provide a value for the delay in PCI Express enumeration, but that isn't
supported without additional out-of-tree kernel patches.
There were already efforts to upstream those kernel patches, because they
reportedly make some PCI Express cards (such as LSI SAS HBAs) usable in
Pine64 RockPro64 (which is also based on the RK3399); otherwise, those PCI
Express cards fail to enumerate. However, providing the required background
and explanations proved to be a tough nut to crack, which is the reason why
those patches remain outside of the kernel mainline for now.
If those out-of-tree patches eventually become upstreamed, the resulting
device-tree changes will almost surely belong to the RK3399 SoC dtsi. Also,
the above-mentioned unusable-without-out-of-tree-patches PCI Express devices
are in all fairness not usable in a Pinebook Pro without some extensive
hardware modifications, which is another reason to delete this redundant
node. When it comes to the Pinebook Pro, only M.2 NVMe SSDs can be installed
out of the box (using an additional passive adapter PCB sold separately by
Pine64), which reportedly works fine with no additional patches.
Fixes: 5a65505a6988 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/0f82c3f97cb798d012270d13b34d8d15305ef293.1711923520.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Several Qualcomm Bluetooth controllers lack persistent storage for the
device address and instead one can be provided by the boot firmware
using the 'local-bd-address' devicetree property.
The Bluetooth bindings clearly states that the address should be
specified in little-endian order, but due to a long-standing bug in the
Qualcomm driver which reversed the address some boot firmware has been
providing the address in big-endian order instead.
The boot firmware in SC7180 Trogdor Chromebooks is known to be affected
so mark the 'local-bd-address' property as broken to maintain backwards
compatibility with older firmware when fixing the underlying driver bug.
Note that ChromeOS always updates the kernel and devicetree in lockstep
so that there is no need to handle backwards compatibility with older
devicetrees.
Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Cc: stable@vger.kernel.org # 5.10
Cc: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
