summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2024-05-16Merge tag 'platform-drivers-x86-v6.10-1' of ↵Linus Torvalds1-1/+39
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - New drivers/platform/arm64 directory for arm64 embedded-controller drivers - New drivers: - Acer Aspire 1 embedded controllers (for arm64 models) - ACPI quickstart PNP0C32 buttons - Dell All-In-One backlight support (dell-uart-backlight) - Lenovo WMI camera buttons - Lenovo Yoga Tablet 2 Pro 1380F/L fast charging - MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only) - MSI WMI sensors (fan speed sensors only for now) - Asus WMI: - 2024 ROG Mini-LED support - MCU powersave support - Vivobook GPU MUX support - Misc. other improvements - Ideapad laptop: - Export FnLock LED as LED class device - Switch platform profiles using thermal management key - Intel drivers: - IFS: various improvements - PMC: Lunar Lake support - SDSI: various improvements - TPMI/ISST: various improvements - tools: intel-speed-select: various improvements - MS Surface drivers: - Fan profile switching support - Surface Pro thermal sensors support - ThinkPad ACPI: - Reworked hotkey support to use sparse keymaps - Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys - WMI core: - New WMI driver development guide - x86 Android tablets: - Lenovo Yoga Tablet 2 Pro 1380F/L support - Xiaomi MiPad 2 status LED and bezel touch buttons backlight support - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits) platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver devm-helpers: Fix a misspelled cancellation in the comments tools arch x86: Add dell-uart-backlight-emulator platform/x86: Add new Dell UART backlight driver platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates platform/x86: x86-android-tablets: Pass struct device to init() platform/x86/amd: pmc: Add new ACPI ID AMDI000B platform/x86/amd: pmf: Add new ACPI ID AMDI0105 platform/x86: p2sb: Don't init until unassigned resources have been assigned platform/surface: aggregator: Log critical errors during SAM probing platform/x86: ISST: Support SST-BF and SST-TF per level platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit() tools/power/x86/intel-speed-select: v1.19 release tools/power/x86/intel-speed-select: Display CPU as None for -1 tools/power/x86/intel-speed-select: SST BF/TF support per level tools/power/x86/intel-speed-select: Increase number of CPUs displayed tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq tools/power/x86/intel-speed-select: Fix display for unsupported levels tools/power/x86/intel-speed-select: Support multiple dies ...
2024-05-14Merge tag 'pm-6.10-rc1' of ↵Linus Torvalds9-0/+158
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly cpufreq updates, including a significant intel-pstate driver update and several amd-pstate improvements plus some updates of ARM cpufreq drivers, general fixes and cleanups. Also included are changes related to system sleep, power capping updates adding support for a new platform and a new hardware feature (among other things), a Samsung exynos-asv driver update allowing it to change its Energy Model after adjusting voltage, minor cpuidle and devfreq updates and a small documentation cleanup. Specifics: - Rework the handling of disabled turbo in the intel_pstate driver and make it update the maximum CPU frequency consistently regardless of the reason on top of a number of cleanups (Rafael Wysocki) - Add missing checks for NULL .exit() cpufreq driver callback to the cpufreq core (Viresh Kumar) - Prevent pulicy->max from going above the frequency QoS maximum value when cpufreq_frequency_table_verify() is used (Xuewen Yan) - Prevent a negative CPU number or frequency value from being printed if they are really large (Joshua Yeong) - Update MAINTAINERS entry for amd-pstate to add two new submaintainers and a designated reviewer (Huang Rui) - Clean up the amd-pstate driver and update its documentation (Gautham Shenoy) - Fix the highest frequency issue in the amd-pstate driver which limits performance (Perry Yuan) - Enable CPPC v2 for certain processors in the family 17H, as requested by TR40 processor users who expect improved performance and lower system temperature (Perry Yuan) - Change latency and delay values to be read from platform firmware firstly for more accurate timing (Perry Yuan) - A new quirk is introduced for supporting amd-pstate on legacy processors which either lack CPPC capability, or only only have CPPC v2 capability (Perry Yuan) - Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan Carpenter, Viresh Kumar) - CPPC cpufreq: Fix possible null pointer dereference (Aleksandr Mishin) - Eliminate uses of of_node_put() from cpufreq (Javier Carrasco, Shivani Gupta) - brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens) - mediatek cpufreq: Add support for MT7988A (Sam Shih) - cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan) - Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq driver (Jeff Johnson) - Fix kerneldoc description of ladder_do_selection() (Jeff Johnson) - Convert the cpuidle kirkwood driver to platform remove callback returning void (Yangtao Li) - Replace deprecated strncpy() with strscpy() in the hibernation core code (Justin Stitt) - Use %ps to simplify debug output in the core system-wide suspend and resume code (Len Brown) - Remove unnecessary else from device_init_wakeup() and make device_wakeup_disable() return void (Dhruva Gole) - Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui) - Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang Rui) - Avoid explicit cpumask allocation on stack in DTPM (Dawei Li) - Make the Samsung exynos-asv driver update the Energy Model after adjusting voltage on top of some preliminary changes of the OPP and Enery Model generic code (Lukasz Luba) - Remove a reference to a function that has been dropped from the power management documentation (Bjorn Helgaas) - Convert the platfrom remove callback to .remove_new for the exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and rk3399_dmc devfreq drivers (Uwe Kleine-König) - Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)" * tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits) PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void PM / devfreq: mtk-cci: Convert to platform remove callback returning void PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void PM / devfreq: exynos-nocp: Convert to platform remove callback returning void cpufreq: amd-pstate: fix the highest frequency issue which limits performance cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc cpuidle: ladder: fix ladder_do_selection() kernel-doc powercap: intel_rapl_tpmi: Enable PMU support powercap: intel_rapl: Introduce APIs for PMU support PM: hibernate: replace deprecated strncpy() with strscpy() cpufreq: Fix up printing large CPU numbers and frequency values MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq cpufreq: amd-pstate: fix code format problems cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing cppc_acpi: print error message if CPPC is unsupported cpufreq: amd-pstate: get transition delay and latency value from ACPI tables cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0 ...
2024-05-14Merge tag 'arm64-upstream' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The most interesting parts are probably the mm changes from Ryan which optimise the creation of the linear mapping at boot and (separately) implement write-protect support for userfaultfd. Outside of our usual directories, the Kbuild-related changes under scripts/ have been acked by Masahiro whilst the drivers/acpi/ parts have been acked by Rafael and the addition of cpumask_any_and_but() has been acked by Yury. ACPI: - Support for the Firmware ACPI Control Structure (FACS) signature feature which is used to reboot out of hibernation on some systems Kbuild: - Support for building Flat Image Tree (FIT) images, where the kernel Image is compressed alongside a set of devicetree blobs Memory management: - Optimisation of our early page-table manipulation for creation of the linear mapping - Support for userfaultfd write protection, which brings along some nice cleanups to our handling of invalid but present ptes - Extend our use of range TLBI invalidation at EL1 Perf and PMUs: - Ensure that the 'pmu->parent' pointer is correctly initialised by PMU drivers - Avoid allocating 'cpumask_t' types on the stack in some PMU drivers - Fix parsing of the CPU PMU "version" field in assembly code, as it doesn't follow the usual architectural rules - Add best-effort unwinding support for USER_STACKTRACE - Minor driver fixes and cleanups Selftests: - Minor cleanups to the arm64 selftests (missing NULL check, unused variable) Miscellaneous: - Add a command-line alias for disabling 32-bit application support - Add part number for Neoverse-V2 CPUs - Minor fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2 arm64/mm: Add uffd write-protect support arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG arm64/mm: Remove PTE_PROT_NONE bit arm64/mm: generalize PMD_PRESENT_INVALID for all levels arm64: simplify arch_static_branch/_jump function arm64: Add USER_STACKTRACE support arm64: Add the arm64.no32bit_el0 command line option drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group kselftest: arm64: Add a null pointer check arm64: defer clearing DAIF.D arm64: assembler: update stale comment for disable_step_tsk arm64/sysreg: Update PIE permission encodings kselftest/arm64: Remove unused parameters in abi test perf/arm-spe: Assign parents for event_source device perf/arm-smmuv3: Assign parents for event_source device perf/arm-dsu: Assign parents for event_source device perf/arm-dmc620: Assign parents for event_source device ...
2024-05-14Merge tag 'irq-core-2024-05-12' of ↵Linus Torvalds1-0/+176
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Core code: - Interrupt storm detection for the lockup watchdog: Lockups which are caused by interrupt storms are not easy to debug because there is no information about the events which make the lockup detector trigger. To make this more user friendly, provide an extenstion to interrupt statistics which allows to take snapshots and an interface to retrieve the delta to the snapshot. Use this new mechanism in the watchdog code to do a two stage lockup analysis by taking the snapshot and printing the deltas for the topmost active interrupts on the second trigger. Note: This contains both the interrupt and the watchdog changes as the latter depend on the former obviously. - Avoid summation loops in the /proc/interrupts output and use the global counter when possible - Skip suspended interrupts on CPU hotplug operations to ensure that they are not delivered before the system resumes the device drivers when coming out of suspend. - On CPU hot-unplug interrupts which are affine to the outgoing CPU are migrated to a different CPU in the affinity mask. This can fail when the CPUs have no vectors left. Instead of giving up try to migrate it to any online CPU and thereby breaking the affinity setting in order to prevent a stale device interrupt which targets an offline CPU - The usual small cleanups Driver code: - Support for the RISCV AIA MSI controller - Make the interrupt allocation for the Loongson PCH controller more flexible to prevent vector exhaustion - The usual set of cleanups and fixes all over the place" * tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc cpuidle: Avoid explicit cpumask allocation on stack irqchip/sifive-plic: Avoid explicit cpumask allocation on stack irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack cpumask: Introduce cpumask_first_and_and() irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown genirq: Reuse irq_is_nmi() genirq/cpuhotplug: Retry with cpu_online_mask when migration fails genirq/cpuhotplug: Skip suspended interrupts when restoring affinity arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251 arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251 ARM: dts: stm32: List exti parent interrupts on stm32mp131 ARM: dts: stm32: List exti parent interrupts on stm32mp151 arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32 irqchip/stm32-exti: Mark events reserved with RIF configuration check irqchip/stm32-exti: Skip secure events irqchip/stm32-exti: Convert driver to standard PM ...
2024-05-13Merge branch 'pm-cpufreq'Rafael J. Wysocki9-0/+158
Merge cpufreq updates for 6.10: - Rework the handling of disabled turbo in the intel_pstate driver and make it update the maximum CPU frequency consistently regardless of the reason on top of a number of cleanups (Rafael Wysocki). - Add missing checks for NULL .exit() cpufreq driver callback to the cpufreq core (Viresh Kumar). - Prevent pulicy->max from going above the frequency QoS maximum value when cpufreq_frequency_table_verify() is used (Xuewen Yan). - Prevent a negative CPU number or frequency value from being printed if they are really large (Joshua Yeong). - Update MAINTAINERS entry for amd-pstate to add two new submaintainers and a designated reviewer (Huang Rui). - Clean up the amd-pstate driver and update its documentation (Gautham Shenoy). - Fix the highest frequency issue in the amd-pstate driver which limits performance (Perry Yuan). - Enable CPPC v2 for certain processors in the family 17H, as requested by TR40 processor users who expect improved performance and lower system temperature (Perry Yuan). - Change latency and delay values to be read from platform firmware firstly for more accurate timing (Perry Yuan). - A new quirk is introduced for supporting amd-pstate on legacy processors which either lack CPPC capability, or only only have CPPC v2 capability (Perry Yuan). - Sun50i: Add support for opp_supported_hw, H616 platform and general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan Carpenter, Viresh Kumar). - CPPC: Fix possible null pointer dereference (Aleksandr Mishin). - Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta). - brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens). - mediatek: Add support for MT7988A (Sam Shih). - cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan). - Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq driver (Jeff Johnson). * pm-cpufreq: (46 commits) cpufreq: amd-pstate: fix the highest frequency issue which limits performance cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc cpufreq: Fix up printing large CPU numbers and frequency values MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq cpufreq: amd-pstate: fix code format problems cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing cppc_acpi: print error message if CPPC is unsupported cpufreq: amd-pstate: get transition delay and latency value from ACPI tables cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0 cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq() cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles cpufreq: sun50i: fix error returns in dt_has_supported_hw() cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations cpufreq: dt-platdev: eliminate uses of of_node_put() cpufreq: dt: eliminate uses of of_node_put() cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node() ...
2024-05-13Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds342-1135/+16013
Pull SoC devicetree updates from Arnd Bergmann: "The updates this time are a bit smaller than most times, mainly because it is not totally dominated by new Qualcomm hardware support. Instead, we larger than average updates for Rockchips, NXP, Allwinner and TI. The only two new SoCs this time are both from NXP and are minor variants of already supported ones. The updates for aspeed, amlogic and mediatek came a little late, so I'm saving those for part 2 in a few days if everything turns out fine. New machines this time contain: - two Broadcom SoC based wireless routers from Asus - Five allwinner based consumer devices for gaming, set-top-box and eboot reader applications - Three older phones based on Qualcomm chips, plus the more recent Sony Xperia 1 V - 14 industrial and embedded boards based on NXP i.MX6, i.MX8, layerscape and s32g3 SoCs - six rockchips boards including another handheld game console and a few single-board computers On top of these, we have the usual cleanups for dtc warnings and updates to add more features to already merged machines" * tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits) arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible arm64: dts: rockchip: add rk3588 pcie and php IOMMUs arm64: dts: rockchip: enable onboard spi flash for rock-3a arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 arm64: dts: rockchip: Enable GPU on Orange Pi 5 arm64: dts: rockchip: enable GPU on khadas-edge2 arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module arm64: dts: rockchip: Add Radxa ROCK 3C dt-bindings: arm: rockchip: add Radxa ROCK 3C arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: Add/fix /memory node unit-addresses arm64: dts: qcom: qcs404: fix bluetooth device address arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader ...
2024-05-09Merge tag 'net-6.9-rc8' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and IPsec. The bridge patch is actually a follow-up to a recent fix in the same area. We have a pending v6.8 AF_UNIX regression; it should be solved soon, but not in time for this PR. Current release - regressions: - eth: ks8851: Queue RX packets in IRQ handler instead of disabling BHs - net: bridge: fix corrupted ethernet header on multicast-to-unicast Current release - new code bugs: - xfrm: fix possible bad pointer derferencing in error path Previous releases - regressionis: - core: fix out-of-bounds access in ops_init - ipv6: - fix potential uninit-value access in __ip6_make_skb() - fib6_rules: avoid possible NULL dereference in fib6_rule_action() - tcp: use refcount_inc_not_zero() in tcp_twsk_unique(). - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation - rxrpc: fix congestion control algorithm - bluetooth: - l2cap: fix slab-use-after-free in l2cap_connect() - msft: fix slab-use-after-free in msft_do_close() - eth: hns3: fix kernel crash when devlink reload during initialization - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family Previous releases - always broken: - xfrm: preserve vlan tags for transport mode software GRO - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets - eth: hns3: keep using user config after hardware reset" * tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family net: hns3: fix kernel crash when devlink reload during initialization net: hns3: fix port vlan filter not disabled issue net: hns3: use appropriate barrier function after setting a bit value net: hns3: release PTP resources if pf initialization failed net: hns3: change type of numa_node_mask as nodemask_t net: hns3: direct return when receive a unknown mailbox message net: hns3: using user configure after hardware reset net/smc: fix neighbour and rtable leak in smc_ib_find_route() ipv6: prevent NULL dereference in ip6_output() hsr: Simplify code for announcing HSR nodes timer setup ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action() dt-bindings: net: mediatek: remove wrongly added clocks and SerDes rxrpc: Only transmit one ACK per jumbo packet received rxrpc: Fix congestion control algorithm selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC ipv6: Fix potential uninit-value access in __ip6_make_skb() net: phy: marvell-88q2xxx: add support for Rev B1 and B2 appletalk: Improve handling of broadcast packets ...
2024-05-08Merge tag 'qcom-arm64-for-6.10-2' of ↵Arnd Bergmann5-4/+171
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Qualcomm Arm64 DeviceTree updates for v6.10 This corrects the obviously broken compatible of the USB VBUS regulator in PM6150. It clears the odd-looking default address on QCS404 EVB, with the expectation that a proper address is provides by other means. The newly added SM8650 GPU node is corrected with a missing memory region. The third DWC3 instance on SC8280XP is added, and enabled on Lenovo Thinkpad X13s to give working fingerprint sensor. * tag 'qcom-arm64-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible arm64: dts: qcom: qcs404: fix bluetooth device address arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader arm64: dts: qcom: sc8280xp: Add USB DWC3 Multiport controller arm64: dts: qcom: sm8650: Fix GPU cx_mem size Link: https://lore.kernel.org/r/20240508021820.206441-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'samsung-dt64-6.10-2' of ↵Arnd Bergmann2-0/+170
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.10, part two Few changes exclusively for Google GS101: 1. Add HSI0 and HSI2 clock controllers (CMUs). 2. Add USB 3.1 Dual Role Device (DRD) support. 3. Add UFS (Universal Flash Storage) support. 4. Document bus clocks in pin controllers necessary for accessing registers. * tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes arm64: dts: exynos: gs101: Add the hsi2 sysreg node dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible arm64: dts: exynos: gs101-oriole: enable USB on this board arm64: dts: exynos: gs101: add USB & USB-phy nodes arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'v6.10-rockchip-dts64-2' of ↵Arnd Bergmann8-0/+879
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Radxa Rock 3C board. More gpu+usb enablement on rk3588 boards as well as two new iommus on rk3588. * tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add rk3588 pcie and php IOMMUs arm64: dts: rockchip: enable onboard spi flash for rock-3a arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 arm64: dts: rockchip: Enable GPU on Orange Pi 5 arm64: dts: rockchip: enable GPU on khadas-edge2 arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module arm64: dts: rockchip: Add Radxa ROCK 3C dt-bindings: arm: rockchip: add Radxa ROCK 3C Link: https://lore.kernel.org/r/13810480.dW097sEU6C@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'mvebu-dt64-6.10-1' of ↵Arnd Bergmann8-67/+88
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.10 (part 1) Few dts fix for dt validation * tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: marvell: cn9130-crb: drop unneeded "status" arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses arm64: dts: marvell: cn9130-db: drop wrong unit-addresses arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells arm64: dts: marvell: ap80x: fix IOMMU unit address Link: https://lore.kernel.org/r/87jzk8ndyy.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'qcom-arm64-fixes-for-6.9-2' of ↵Arnd Bergmann1-17/+13
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes One more Qualcomm Arm64 DeviceTree fix for v6.9 On ths SA8155P automotive platform, the wrong gpio controller is defined for the SD-card detect pin, which depending on probe ordering of things cause ethernet to be broken. The card detect pin reference is corrected to solve this problem. * tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-05arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit addressKrzysztof Kozlowski1-34/+64
The Espressobin Ultra DTS includes Espressobin DTSI which defines ethernet-switch@1 node. The Ultra DTS overrides "reg" to 3, but that leaves still old unit address which conflicts with the new phy@1 node (W=1 dtc warning): armada-3720-espressobin.dtsi:148.29-203.4: Warning (unique_unit_address_if_enabled): /soc/internal-regs@d0000000/mdio@32004/ethernet-switch@1: duplicate unit-address (also used in node /soc/internal-regs@d0000000/mdio@32004/ethernet-phy@1) Fix this by deleting ethernet-switch@1 node and merging original node with code from Ultra DTS into new ethernet-switch@3. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-05-05arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cellsKrzysztof Kozlowski1-2/+0
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings: armada-3720-turris-mox.dts:218.10-255.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/spi@10600/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-05-05arm64: dts: marvell: eDPU: drop redundant address/size-cellsKrzysztof Kozlowski1-2/+0
The ethernet-switch node does not have children with unit addresses, so address/size-cells are not really correct, as reported by dtc W=1 warning: armada-3720-eDPU.dts:26.19-60.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/mdio@32004/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property This probably also fixes dtbs_check warning, but I could not find it, so not sure about that. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-05-03arm64: dts: qcom: pm6150: correct USB VBUS regulator compatibleKrzysztof Kozlowski1-2/+2
The first part of the compatible of USB VBUS node misses ending quote, thus we have one long compatible consisting of two compatible strings leading to dtbs_check warnings: sc7180-idp.dtb: usb-vbus-regulator@1100: compatible:0: 'qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$' sc7180-idp.dtb: /soc@0/spmi@c440000/pmic@0/usb-vbus-regulator@1100: failed to match any schema with compatible: ['qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg'] Reported-by: Rob Herring <robh@kernel.org> Fixes: f81c2f01cad6 ("arm64: dts: qcom: pm6150: define USB-C related blocks") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240330091311.6224-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-03arm64: dts: mediatek: mt8183-pico6: Fix bluetooth nodeChen-Yu Tsai1-1/+2
Bluetooth is not a random device connected to the MMC/SD controller. It is function 2 of the SDIO device. Fix the address of the bluetooth node. Also fix the node name and drop the label. Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03arm64: dts: rockchip: add rk3588 pcie and php IOMMUsNiklas Cassel1-0/+24
The mmu600_pcie is connected with the five PCIe controllers. The mmu600_php is connected with the USB3 controller, the GMAC controllers, and the SATA controllers. See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual). The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs. iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs Additionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID): arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC. Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable onboard spi flash for rock-3aChukun Pan1-0/+14
There is a mx25u12835f spi flash on this board, enable it. [ 2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes) Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240409120003.309358-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5Jimmy Hon1-0/+94
Add support for using the Orange Pi 5 USB-C port for USB in OHCI, EHCI or XHCI mode. Displayport AltMode is not yet supported. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240418035232.35344-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Enable GPU on Orange Pi 5Jimmy Hon1-0/+5
Enable the Mali GPU in the Orange Pi 5 Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240425222913.1760-1-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable GPU on khadas-edge2Muhammed Efe Cetin1-0/+5
Enable the Mali GPU node on Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/20240501142241.98554-1-efectn@6tel.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO boardAnand Moon1-0/+8
Add the proper nodes to activate the USB 3.0 ports on the Edgeble NCM6A-IO board. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-2-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute ModuleAnand Moon1-0/+2
On Edgeble Neural Compute Module add system-power-controller property to RK806 pmic so that these chips can power off the device. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-1-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add Radxa ROCK 3CChukun Pan2-0/+727
The Radxa ROCK 3C is a development board with the Rockchip RK3566 SoC. It has the following features: - 1/2/4GB LPDDR4 - 1x HDMI Type A - 1x PCIE 2.0 slot - 1x FAN connector - 3.5mm jack with mic - 1GbE RTL8211F Ethernet - 1x USB 3.0, 3x USB 2.0 - 40-pin expansion header - MicroSD card/eMMC socket - 16MB SPI NOR (gd25lq128d) - AP6256 or AIC8800 WiFi/BT Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn [dropped rk809-sound and not specified pmic sound properties] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrlAndré Draszik1-0/+9
The pinctrl instances hsi1, gsactrl, and gsacore need a clock for register access to work. Since we haven't implemented the relevant CMUs for the clocks required by these instances just add empty clocks for now so as to make the DT pass the validation checks. Once the clocks are implmented in the gs101 clock driver, these should be updated then. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-4-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2André Draszik1-0/+2
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-3-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]André Draszik1-0/+4
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-2-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) aliveAndré Draszik1-0/+4
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-1-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-02Merge tag 'ti-k3-dt-for-v6.10' of ↵Arnd Bergmann38-167/+597
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.10 Generic Cleanups/Fixes: - fixup of generated dtb imx219 overlay file names - Remove UART baud rate selection in device tree. - Use exact ranges for FSS. SoC specific Fixes/Features: AM625: - Add USB PHY2 region and usb phy control registers AM62A - Add USB PHY2 region and usb phy control registers, Disable USB LPM. - Add wave-512 video encoder/decoder support - Enable UHS mode for SD AM62P: - Disable ethernet by default - Add USB support AM654 - Serdes fixups - SDHCI fixups. AM67/j722s: - Disable ethernet by default - Add USB support AM68/J721s2: - Add main ESM range - Add support for SDR104 AM69/J784S4: - Add main ESM range - Enable support for UHS mode Board specific fixes/Features: AM625: - BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset - phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable ability to apply overlays - verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci - lp-sk: Drop power button - sk: minor white space cleanup. AM64 - phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan AM65: - iot2050: Add icssg-prueth for PG1 AM67/j722s: - evm: Enable UHS support for SD card and eMMC support. AM69/J784s4: - evm/sk: Fix uart pins and pinctrl macro usage. * tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits) arm64: dts: ti: Fix csi2-dual-imx219 dtb names arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C arm64: dts: ti: k3-j784s4: Add main esm address range arm64: dts: ti: k3-j721s2: Add main esm address range arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes arm64: dts: ti: k3-am65-main: Fix sdhci node properties arm64: dts: ti: Enable overlays for the am625-phyboard-lyra arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type arm64: dts: ti: k3-am62a: Disable USB LPM arm64: dts: ti: k3-am62p: add the USB sub-system ... Link: https://lore.kernel.org/r/20240501124319.ake5j2oc5pbnn5nb@contour Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-02arm64: dts: Add/fix /memory node unit-addressesRob Herring15-15/+15
'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes. It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Chanho Min <chanho.min@lge.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240430191856.874600-2-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-01arm64: dts: qcom: qcs404: fix bluetooth device addressJohan Hovold1-1/+1
The 'local-bd-address' property is used to pass a unique Bluetooth device address from the boot firmware to the kernel and should otherwise be left unset so that the OS can prevent the controller from being used until a valid address has been provided through some other means (e.g. using btmgmt). Fixes: 60f77ae7d1c1 ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-01arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint readerJohan Hovold1-0/+85
Enable the multiport USB controller to which the fingerprint reader in the X13s power button is connected. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240501065641.965-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-01arm64: dts: qcom: sc8280xp: Add USB DWC3 Multiport controllerKrishna Kurapati1-0/+82
Add USB and DWC3 node for tertiary port of SC8280 along with Multiport interrupts and PHYs. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240429162048.2133512-2-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-01arm64: dts: ti: Fix csi2-dual-imx219 dtb namesJai Luthra1-3/+3
Fix the output filenames of the combined device tree blobs generated by applying *-csi2-dual-imx219-* overlays on the base dtbs during compile test. Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219") Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Link: https://lore.kernel.org/r/104fbdbc-a3f6-091a-72f4-17d4fa24ad92@ti.com/ Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-30arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulatorPeter Griffin1-0/+18
Enable ufs & ufs phy nodes for Oriole. Also define the ufs regulator node. ufs regulator is a stub until full s2mpg11 slave pmic support is added. The gpio defined is for the BOOTLD0 (gs101) signal connected to UFS_EN(s2mpg11) gpio enabled voltage rail for UFS. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240430141445.2688499-4-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-30arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodesPeter Griffin1-0/+36
Add the ufs controller node and phy node for gs101. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240430141445.2688499-3-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-30arm64: dts: exynos: gs101: Add the hsi2 sysreg nodePeter Griffin1-0/+6
This has some configuration bits such as sharability that are required by UFS. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240430141445.2688499-2-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-30Merge tag 'arm-soc/for-6.10/devicetree-arm64' of ↵Arnd Bergmann2-1/+1
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 6.10, please pull the following: - Rafal moves the "brcm,wp-not-connected" property from the individual board DTSes to the SoC' DTSI since all boards a designed the same way * tag 'arm-soc/for-6.10/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: bcmbca: bcm4908: set brcm,wp-not-connected Link: https://lore.kernel.org/r/20240429213703.2327834-3-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-29arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOsRoger Quadros1-2/+6
The RESET GPIO pinmux should be part of MDIO bus node so that they can be in the right state before the PHY can be probed via MDIO bus scan. The GPIO pin should be setup with PIN_INPUT so that input circuitry is enabled in case software wants to check pin status. Without this, incorrect status is shown in /sys/kernel/debug/gpio. Add GPIO reset for the Gigabit Ethernet PHY. As per RTL8211F datasheet, reset assert width is 10ms and PHY registers can be access accessed after 50ms of reset deassert. Fixes: f5a731f0787f ("arm64: dts: ti: Add k3-am625-beagleplay") Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240305-b4-for-v6-9-am65-beagleplay-ethernet-reset-v2-1-2bf463a7bf13@kernel.org Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-CGarrett Giordano1-1/+25
The USB-C PD manages plug orientation, power delivery, and our endpoint for the USB interface. Add this node and include its endpoint. Configure USB0 for role-switching and wire it to our USB-C PD endpoint. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20240425152558.485763-1-ggiordano@phytec.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-j784s4: Add main esm address rangeUdit Kumar1-0/+1
Main ESM address change was missing for J784S4 SOC, So adding main ESM address mapping. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20240424075423.1229127-3-u-kumar1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-j721s2: Add main esm address rangeUdit Kumar1-0/+1
Main ESM address change was missing for J721S2 SOC, So adding main ESM address mapping. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20240424075423.1229127-2-u-kumar1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-mociStefan Eichenberger1-0/+22
Previously, we had the sleep-moci pin set to always on. However, the Dahlia carrier board supports disabling the sleep-moci when the system is suspended to power down peripherals that support it. This reduces overall power consumption. This commit adds support for this feature by disabling the reg_force_sleep_moci regulator and adding a new regulator for the USB hub that can be turned off when the system is suspended. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240301084901.16656-3-eichest@gmail.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulatorStefan Eichenberger1-8/+16
The Verdin family has a signal called sleep-moci which can be used to turn off peripherals on the carrier board when the SoM goes into suspend. So far we have hogged this signal, which means the peripherals are always on and it is not possible to add peripherals that depend on the sleep-moci to be on. With this change, we replace the hog with a regulator so that peripherals can add their own regulators that use the same gpio. Carrier boards that allow peripherals to be powered off in suspend can disable this regulator and implement their own regulator to control the sleep-moci. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240301084901.16656-2-eichest@gmail.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSDBhavya Kapoor1-1/+0
Enable the UHS modes for MMCSD in J722S by removing the no-1-8-v property. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Reviewed-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240422131840.34642-1-b-kapoor@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-j784s4-main: Enable support for UHS modeDasnavis Sabiya1-2/+0
Remove sdhci-caps-mask to enable support for SDR104 speed mode for SD card and remove no-1-8-v property so that SD card can work in any UHS-1 high speed mode it can support. Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC") Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240423151732.3541894-6-jm@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed modeBhavya Kapoor1-2/+0
According to TRM for J721S2, SDR104 speed mode is supported by the SoC but its capabilities were masked in device tree. Remove sdhci-caps-mask to enable support for SDR104 speed mode for SD card in J721S2 SoC. [+] Refer to : section 12.3.6.1.1 MMCSD Features, in J721S2 TRM - https://www.ti.com/lit/zip/spruj28 Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC") Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20240423151732.3541894-5-jm@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cardsVignesh Raghavendra2-2/+21
Hook up required IO voltage regulators and drop no-1-8-v to support UHS modes on SD cards. Fixes: 5fc6b1b62639 ("arm64: dts: ti: Introduce AM62A7 family of SoCs") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240423151732.3541894-4-jm@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-29arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodesJudith Mendez1-9/+0
On AM65x platform, sdhci0 is for eMMC and sdhci1 is for SD. Remove the properties that are not applicable for each device. Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values") Fixes: d7600d070fb0 ("arm64: dts: ti: k3-am65-main: Add support for sdhci1") Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240423151732.3541894-3-jm@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 14:46:09 +0300