Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- Enable essential PMIC and regulatro drivers for MT8195.
- Enable Arm arch timer for MT7629.
* tag 'v5.18-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: mediatek: select arch timer for mt7629
arm64: defconfig: enable some mt6360 PMIC drivers
arm64: defconfig: enable MT6359 regulator driver
Link: https://lore.kernel.org/r/3a6e5606-7b89-2ad8-7b45-21d3a4e9e706@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.19
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
* tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm GPI DMA Driver
arm64: defconfig: Enable Qualcomm PCIe Gen2 PHY
arm64: defconfig: Enable SM8250 video clock controller
arm64: defconfig: Enable PM8916 watchdog driver
arm64: defconfig: enable ath11k driver
arm64: defconfig: Enable some Qualcomm drivers
arm64: defconfig: reenable SM_DISPCC_8250
arm64: defconfig: enable wcd9335 codec as module
arm64: defconfig: enable Qualcomm RX and TX macro for SM8250 audio
Link: https://lore.kernel.org/r/20220509170158.311962-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig
TI K3 defconfig updates for v5.19
* Enable TIDSS and Display Port related configs
* Enable Cadence Torrent PHY for Display Port
* tag 'ti-k3-config-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable configs for DisplayPort on J721e
Link: https://lore.kernel.org/r/88cd734e-47a7-4307-c119-8f6ec6c40452@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.19-rc1
This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.
* tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build Tegra ASRC module
Link: https://lore.kernel.org/r/20220506143005.3916655-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19 (take two)
- Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
defconfig,
* tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
Link: https://lore.kernel.org/r/cover.1651828601.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
imx8mn-evk has a WM8524 codec.
Enable the WM8524 codec driver so that audio can be functional
on this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
* tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.18-rc1
arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support
arm64: defconfig: Enable ARCH_R9A07G054
Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Key devices that support displays on SoCs like the Komeda DRM driver, the
older HDLCD were not enabled by default and should be so displays can work
out of the box on defconfig. Also Candence I2C support should be enabled so
the PHY and thus displays can work too.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Link: https://lore.kernel.org/r/20220427114200.111904-1-carsten.haitzler@foss.arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the Renesas RZ/V2M SoC and the uart it uses.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220330154024.112270-12-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable support for the Renesas RZ/G2UL SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220423130206.114032-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable DRM and PHY configs required for supporting
DisplayPort on J721e
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20220426152926.20953-1-r-ravikumar@ti.com
|
|
Asynchronous Sample Rate Converter (ASRC) module is a client of AHUB on
Tegra186 and later SoCs. To use this module enable the driver build.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Enable the charger and regulator driver for the
MT6360 PMIC. These drivers are essential for
some MediaTek MT8195 based boards to boot properly.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220415150003.1793063-5-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The PMIC regulators are essentials to be able to
boot MediaTek MT8195 based boards to userspace.
Like the other MediaTek PMIC regulator driver,
let's enable as well the one for the MT6359 PMIC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220415150003.1793063-4-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Increase build and test coverage by enabling modular support for the
Maxim MAX96712 Quad GMSL2 Deserializer, as used on the Renesas Falcon
board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7b5ea7eaabc1da79fd974f9d9845a5a527f2fb14.1649947458.git.geert+renesas@glider.be
|
|
Qualcomm GPI DMA Driver is used for DMA transfers for Serial engines
like Geni I2C and SPI.
Enable this dma driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225044033.1376769-1-vkoul@kernel.org
|
|
The Qualcomm QCS404 platform uses the PCIe Gen2 PHY, enable the driver
for this to ensure that PCIe is functional.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20220217040205.1898644-1-bjorn.andersson@linaro.org
|
|
Enable the building of the sm8250 video clock controller by default.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131202721.2122605-2-dmitry.baryshkov@linaro.org
|
|
Enable watchdog driver for pm8916 block. It is used on msm8916/apq8016
platforms (e.g. Dragonboard 410c).
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
[DB: changed to =m, expanded commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131202721.2122605-1-dmitry.baryshkov@linaro.org
|
|
Enable Atheros Ath11k driver to be built on arm64 platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131165056.2117434-2-dmitry.baryshkov@linaro.org
|
|
Enable coincell, fastrpc, mailbox and adc-tm5 drivers to be built as
modules. These driver are used on many of Qualcomm platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131165056.2117434-1-dmitry.baryshkov@linaro.org
|
|
CONFIG_SM_DISPCC_8250 is not enabled by default, but it is still
necessary for the Qualcomm RB5 board. Reenable it (as it was enabled
before the commit dde8cd786e37 ("arm64: defconfig: rebuild default
configuration")).
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fixes: dde8cd786e37 ("arm64: defconfig: rebuild default configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404215913.1497172-1-dmitry.baryshkov@linaro.org
|
|
Enable CONFIG_SND_SOC_WCD9335 to built as module. This enable audio
codec used on the Qualcomm Dragonboard820c device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403211329.1410725-1-dmitry.baryshkov@linaro.org
|
|
Add two config options required to enable audio on Qualcomm SM8250
hardware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401193230.846207-1-dmitry.baryshkov@linaro.org
|
|
Enable support for the Renesas RZ/V2L SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220308140033.10501-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfig
ARM64 defconfig for v5.18
- Enable the Altera FPGA Manager CVP driver
* tag 'arm64_defconfig_for_v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: defconfig: enable the CVP driver
Link: https://lore.kernel.org/r/20220310195740.151250-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based defconfig updates for
5.18, please pull the following:
- Florian enables Broadcom STB drivers for NAND, SATA, Ethernet switch,
USB PHY and host controllers, watchdog, PWM and Ethernet controller
* tag 'arm-soc/for-5.18/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable additional Broadcom STB drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the driver for the Layerscape SFP (Security Fuse Processor) found
on most Layerscape SoCs. For example, a per-device unique serial number
is stored in the fuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.17
This enables GCC, TLMM pinctrl and the main interconnect provider for
the SM8450 platform.
* tag 'qcom-arm64-defconfig-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Add SM8450 icc configs
arm64: defconfig: Add SM8450 pinctrl config
arm64: defconfig: Add SM8450 GCC config
Link: https://lore.kernel.org/r/20211222152219.3752973-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Build the CVP driver in the standard arm64 defconfig.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- Enable Airoha SoC on armv7 config.
- Enable CPU freq for arm64 based SoCs.
- Enable PMIC based (mt6397) RTC for mt8173
* tag 'v5.17-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
arm64: defconfig: Enable cpufreq for MediaTek
arm64: defconfig: Enable MT6397 RTC
Link: https://lore.kernel.org/r/9b90b407-025b-ec78-a626-faccdbc7ab39@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.18-rc1
Enables the GPCDMA driver that was recently introduced for Tegra186 and
later generation Tegra SoCs.
* tag 'tegra-for-5.18-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: tegra: Enable GPCDMA
Link: https://lore.kernel.org/r/20220225164741.1064416-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.18
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Disable unneeded 8250 serial options
arm64: defconfig: Enable Audio Graph Card2 driver
Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.18:
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
* tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable verdin-imx8mm relevant drivers as modules
arm64: defconfig: build r8169 as a module
arm64: defconfig: build imx-sdma as a module
arm64: defconfig: enable imx8m pcie phy driver
arm64: defconfig: enable bpf/cgroup firewalling
arm64: defconfig: rebuild default configuration
arm64: defconfig: re-order default configuration
arm64: defconfig: enable pcieaer configuration
arm64: defconfig: enable taskstats configuration
ARM: imxrt_defconfig: Add i.MXRT family defconfig
Link: https://lore.kernel.org/r/20220222075226.160187-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig
ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:
- Enable drivers for USB and SERDES IPs on TI K3 SoC
* tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable USB controller drivers for TI K3 SoC
Link: https://lore.kernel.org/r/20211223094040.15349-1-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable TEGRA_GPC_DMA in defconfig for Tegra186 and Tegra196 gpc
dma controller driver
Signed-off-by: Rajesh Gumasta <rgumasta@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Enable various drivers which support peripherals as found on the
Verdin iMX8M Mini et al. computer/system on modules:
- CONFIG_CAN_MCP251XFD
At least one Microchip MCP2518FDT SPI CAN controller which this driver
also supports may be found on the Verdin iMX8M Mini computer/system on
module.
- CONFIG_BT_HCIUART_MRVL, CONFIG_BT_MRVL, CONFIG_BT_MRVL_SDIO and
CONFIG_MWIFIEX_SDIO
The AzureWave AW-CM276NF which these Bluetooth and Wi-Fi drivers also
support may be found on the Verdin iMX8M Mini (as well as the Apalis
iMX8, Colibri iMX8X and Verdin iMX8M Plus for that matter) computer/
system on module.
- CONFIG_SENSORS_LM75
The TI TMP75C temperature sensor which this driver also supports may be
found on the Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for
that matter) computer/system on module.
- CONFIG_SND_SOC_NAU8822
The Nuvoton Technology Corporation (NTC) NAU88C22YG which this driver
also supports may be found on the Verdin Development Board a carrier
board for the Verdin family of computer/system on module which the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
may be mated in.
- CONFIG_TI_ADS1015
The TLA2024 ADC which this driver also supports may be found on the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
computer/system on module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Build Realtek Gigabit Ethernet driver as a module.
Network cards based on chipsets this driver supports are ubiquitous both
in regular PCIe as well as mini-PCIe and nowadays even various M.2
formats. It is therefore a suitable card to be used for any kind of PCIe
and/or Gigabit Ethernet testing. As it is not designed in, just enabling
it as a module seems most suitable.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This avoids firmware load error and sysfs fallback reported as follows:
[ 0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load
for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs
fallback for: imx/sdma/sdma-imx7d.bin
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This enables the i.MX 8M PCIe PHY driver (CONFIG_PHY_FSL_IMX8M_PCIE)
required for PCIe functionality.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This avoids the following systemd warning:
[ 2.618538] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 2.630916] systemd[1]: (This warning is only shown for the first
unit using IP firewalling.)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Run "make defconfig; make savedefconfig" to rebuild defconfig.
This dropped the following configuration options which are nowaday's
already enabled (resp. disabled) by default:
CONFIG_MEMCG_SWAP=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_FSL_MC_BUS=y
CONFIG_QCOM_SCM=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_XHCI_PCI=m
CONFIG_SDM_GCC_845=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_POWER_AVS was renamed to POWER_AVS_OMAP in commit bca815d62054
("PM: AVS: smartreflex Move driver to soc specific drivers"). As there
are no 64-bit Arm OMAPs it getting dropped seems fair.
Note that the following user-selectable configuration options have been
preserved:
CONFIG_SECCOMP=y
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_CONFIGFS_FS=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use "make defconfig", "make savedefconfig" and friends to just assess
re-ordering of configuration items in defconfig.
This re-ordered the following configuration options:
CONFIG_BPF_JIT=y
CONFIG_SECCOMP=y
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_INTEL_STRATIX10_SERVICE=y
CONFIG_INTEL_STRATIX10_RSU=m
CONFIG_QCOM_SCM=y
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
CONFIG_CAN_FLEXCAN=m
CONFIG_PCIE_LAYERSCAPE_GEN4=y
CONFIG_FSL_MC_BUS=y
CONFIG_MTK_DEVAPC=m
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MESON_GXL_PHY=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_QCOM_CPR=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_QORIQ_THERMAL=m
CONFIG_SUN8I_THERMAL=y
CONFIG_TEGRA_BPMP_THERMAL=m
CONFIG_ARM_SMC_WATCHDOG=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_LONTIUM_LT9611UXC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_IMX_AUDMIX=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_IPQ_GCC_8074=y
CONFIG_SM_DISPCC_8250=y
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A774E1=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A779F0=y
CONFIG_HISI_PMU=y
CONFIG_QCOM_QFPROM=y
CONFIG_MUX_MMIO=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable CONFIG_PCIEAER which is required for CONFIG_ACPI_APEI_PCIEAER.
Commit 8c8ff55b4da7 ("PCI/AER: Don't select CONFIG_PCIEAER by default")
changed it to no longer being enabled by default.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable CONFIG_TASKSTATS which is required for CONFIG_TASK_XACCT (and
subsequently CONFIG_TASK_IO_ACCOUNTING). Previously, taskstats got
pulled in by KVM but that got changed in commit 63b3f96e1a98
("kvm: Select SCHED_INFO instead of TASK_DELAY_ACCT").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas RSPI, RZ/G2L thermal, RZ/G2L WDT watchdog, and OSTM timer,
as used on the RZ/G2L SMARC EVK board,
- R-Car Image Signal Processor (ISP) and Display Unit embedded MIPI
DSI encoder on R-Car V3U, as used on the Falcon board.
All of the above are modular, except for thermal, watchdog, and timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be
|
|
Enable the following drivers as modular:
- NAND controller with CONFIG_MTD_NAND_BRCMNAND
- AHCI/SATA controller driver with CONFIG_AHCI_BRCM
- Starfighter 2 Ethernet switch driver with CONFIG_NET_DSA_BCM_SF2
- USB drivers (OHCI, EHCI, XHCI) with CONFIG_USB_BRCMSTB
- Watchdog with CONFIG_BCM7038_WDT
- PWM with CONFIG_PWM_BRCMSTB
- SYSTEMPORT Ethernet controller with CONFIG_SYSTEMPORT
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
commit 6e5f68fe3f2d35 ("ASoC: add Audio Graph Card2 driver")
added new Audio Graph Card2 driver which can handle
sound card more flexibly.
This patch enables it on defconfig.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220124021142.224592-3-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|