summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2023-08-03Merge tag 'soc-fixes-6.5-2' of ↵Linus Torvalds11-24/+31
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A couple of platforms get a lone dts fix each: - SoCFPGA: Fix incorrect I2C property for SCL signal - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L. - Juno/Vexpress: remove a dangling symlink - at91: sam9x60 SoC detection compatible strings - nspire: Fix arm primecell compatible string On the NXP i.MX platform, there multiple issues that get addressed: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action On the driver side, there are two fixes for tegra memory controller drivers addressing regressions from the merge window, a couple of minor correctness fixes for SCMI and SMCCC firmware, as well as a build fix for an lcd backlight driver" * tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) backlight: corgi_lcd: fix missing prototype memory: tegra: make icc_set_bw return zero if BWMGR not supported arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60 ARM: dts: at91: sam9x60: fix the SOC detection ARM: dts: nspire: Fix arm primecell compatible string firmware: arm_scmi: Fix chan_free cleanup on SMC firmware: arm_scmi: Drop OF node reference in the transport channel setup soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies firmware: arm_scmi: Fix signed error return values handling firmware: smccc: Fix use of uninitialised results structure arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink ...
2023-07-30arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FSSven Joachim1-1/+1
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs") promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS within a couple of releases, but five years later this still has not happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs. Get rid of it mechanically: git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' | xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/' Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't regenerated their config file in the last five years will need to just get the new name right when they do. Signed-off-by: Sven Joachim <svenjoac@gmx.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-28Merge tag 'arm64-fixes' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - A couple of SME updates for recent fixes (one of which went to stable): reverting the flushing of the SME hardware state along with the thread flushing and making sure we have the correct vector length before reallocating. - An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs" is 0 (the spec reports the number of IDs in the mapping range minus 1). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info() arm64/sme: Set new vector length before reallocating arm64/fpsimd: Don't flush SME register hardware state along with thread
2023-07-27Merge tag 'socfpga_dts_fix_for_v6.5' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA dts fix for v6.5 - Fix incorrect I2C property for SCL signal * tag 'socfpga_dts_fix_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: fix incorrect I2C property for SCL signal Link: https://lore.kernel.org/r/20230724145617.887443-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-27Merge tag 'renesas-fixes-for-v6.5-tag1' of ↵Arnd Bergmann2-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v6.5 - Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L. * tag 'renesas-fixes-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels Link: https://lore.kernel.org/r/cover.1690463347.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-27Merge tag 'imx-fixes-6.5' of ↵Arnd Bergmann6-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action * tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-26arm64/sme: Set new vector length before reallocatingMark Brown1-2/+2
As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline. Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-07-26arm64/fpsimd: Don't flush SME register hardware state along with threadMark Brown1-1/+0
We recently changed the fpsimd thread flush to flush the physical SME state as well as the thread state for the current thread. Unfortunately this leads to intermittent corruption in interaction with the lazy FPSIMD register switching. When under heavy load such as can be triggered by the startup phase of fp-stress it is possible that the current thread may not be scheduled prior to returning to userspace, and indeed we may end up returning to the last thread that was scheduled on the PE without ever exiting the kernel to any other task. If that happens then we will not reload the register state from memory, leading to loss of any SME register state. Since this was purely an attempt to defensively close off potential problems revert the change. Fixes: af3215fd0230 ("arm64/fpsimd: Exit streaming mode when flushing tasks") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230724-arm64-dont-flush-smstate-v1-1-9a8b637ace6c@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-07-25arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channelsBiju Das2-16/+16
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow interrupt names start with 'tci' instead of 'tgi'. Replace the below overflow/underflow interrupt names: - tgiv0->tciv0 - tgiv1->tciv1 - tgiu1->tciu1 - tgiv2->tciv2 - tgiu2->tciu2 - tgiv3->tciv3 - tgiv4->tciv4 - tgiv6->tciv6 - tgiv7->tciv7 - tgiv8->tciv8 - tgiu8->tciu8 Fixes: 26336d66d021 ("arm64: dts: renesas: r9a07g044: Add MTU3a node") Fixes: dd123dd01def ("arm64: dts: renesas: r9a07g054: Add MTU3a node") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230724091927.123847-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-07-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds14-69/+132
Pull kvm fixes from Paolo Bonzini: "ARM: - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg s390: - Two fixes for asynchronous destroy x86 fixes will come early next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: pv: fix index value of replaced ASCE KVM: s390: pv: simplify shutdown and fix race KVM: arm64: Fix the name of sys_reg_desc related to PMU KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption KVM: arm64: Add missing BTI instructions KVM: arm64: Correctly handle page aging notifiers for unaligned memslot KVM: arm64: Disable preemption in kvm_arch_hardware_enable() KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
2023-07-23Merge tag 'kvmarm-fixes-6.5-1' of ↵Paolo Bonzini14-69/+132
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #1 - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt. - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking. - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg.
2023-07-21Merge tag 'arm64-fixes' of ↵Linus Torvalds4-15/+38
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I've picked up a handful of arm64 fixes while Catalin's been away, so here they are. Below is the usual summary, but we have basically have two cleanups, a fix for an SME crash and a fix for hibernation: - Fix saving of SME state after SVE vector length is changed - Fix sparse warnings for missing vDSO function prototypes - Fix hibernation resume path when kfence is enabled - Fix field names for the HFGxTR_EL2 register" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes arm64: vdso: Clear common make C=2 warnings arm64: mm: Make hibernation aware of KFENCE arm64: Fix HFGxTR_EL2 field naming
2023-07-21Merge tag 'juno-fix-6.5' of ↵Arnd Bergmann1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Armv8 Juno/Vexpress DTS fix for v6.5 A single simple fix removing dangling symlink left as part of arm dts files movement to vendor sub-directories. It is harmless and causes no issue for the build but scripts copying files see errors/failures. * tag 'juno-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink Link: https://lore.kernel.org/r/20230721112359.3369716-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-21arm64/fpsimd: Ensure SME storage is allocated after SVE VL changesMark Brown1-8/+25
When we reconfigure the SVE vector length we discard the backing storage for the SVE vectors and then reallocate on next SVE use, leaving the SME specific state alone. This means that we do not enable SME traps if they were already disabled. That means that userspace code can enter streaming mode without trapping, putting the task in a state where if we try to save the state of the task we will fault. Since the ABI does not specify that changing the SVE vector length disturbs SME state, and since SVE code may not be aware of SME code in the process, we shouldn't simply discard any ZA state. Instead immediately reallocate the storage for SVE, and disable SME if we change the SVE vector length while there is no SME state active. Disabling SME traps on SVE vector length changes would make the overall code more complex since we would have a state where we have valid SME state stored but might get a SME trap. Fixes: 9e4ab6c89109 ("arm64/sme: Implement vector length configuration prctl()s") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-1-8eea06b82d57@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2023-07-20arm64: vdso: Clear common make C=2 warningsZhen Lei1-0/+4
make C=2 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- xxx.o When I use the command above to do a 'make C=2' check on any object file, the following warnings are always output: CHECK arch/arm64/kernel/vdso/vgettimeofday.c arch/arm64/kernel/vdso/vgettimeofday.c:9:5: warning: symbol '__kernel_clock_gettime' was not declared. Should it be static? arch/arm64/kernel/vdso/vgettimeofday.c:15:5: warning: symbol '__kernel_gettimeofday' was not declared. Should it be static? arch/arm64/kernel/vdso/vgettimeofday.c:21:5: warning: symbol '__kernel_clock_getres' was not declared. Should it be static? Therefore, the declaration of the three functions is added to eliminate these common warnings to provide a clean output. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20230713115831.777-1-thunder.leizhen@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2023-07-20arm64: mm: Make hibernation aware of KFENCENikhil V1-1/+3
In the restore path, swsusp_arch_suspend_exit uses copy_page() to over-write memory. However, with features like KFENCE enabled, there could be situations where it may have marked some pages as not valid, due to which it could be reported as invalid accesses. Consider a situation where page 'P' was part of the hibernation image. Now, when the resume kernel tries to restore the pages, the same page 'P' is already in use in the resume kernel and is kfence protected, due to which its mapping is removed from linear map. Since restoring pages happens with the resume kernel page tables, we would end up accessing 'P' during copy and results in kernel pagefault. The proposed fix tries to solve this issue by marking PTE as valid for such kfence protected pages. Co-developed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Nikhil V <quic_nprakash@quicinc.com> Link: https://lore.kernel.org/r/20230713070757.4093-1-quic_nprakash@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2023-07-19bpf, arm64: Fix BTI type used for freplace attached functionsAlexander Duyck1-1/+7
When running an freplace attached bpf program on an arm64 system w were seeing the following issue: Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI After a bit of work to track it down I determined that what appeared to be happening is that the 'bti c' at the start of the program was somehow being reached after a 'br' instruction. Further digging pointed me toward the fact that the function was attached via freplace. This in turn led me to build_plt which I believe is invoking the long jump which is triggering this error. To resolve it we can replace the 'bti c' with 'bti jc' and add a comment explaining why this has to be modified as such. Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Xu Kuohai <xukuohai@huawei.com> Link: https://lore.kernel.org/r/168926677665.316237.9953845318337455525.stgit@ahduyck-xeon-server.home.arpa Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-18arm64: dts: freescale: Fix VPU G2 clockBenjamin Gaignard1-1/+1
Set VPU G2 clock to 300MHz like described in documentation. This fixes pixels error occurring with large resolution ( >= 2560x1600) HEVC test stream when using the postprocessor to produce NV12. Fixes: 4ac7e4a81272 ("arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmuxHugo Villeneuve1-1/+1
For SOMs with an onboard PHY, the RESET_N pull-up resistor is currently deactivated in the pinmux configuration. When the pinmux code selects the GPIO function for this pin, with a default direction of input, this prevents the RESET_N pin from being taken to the proper 3.3V level (deasserted), and this results in the PHY being not detected since it is held in reset. Taken from RESET_N pin description in ADIN13000 datasheet: This pin requires a 1K pull-up resistor to AVDD_3P3. Activate the pull-up resistor to fix the issue. Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: phycore-imx8mm: Correction in gpio-line-namesYashwanth Varakala2-2/+2
Remove unused nINT_ETHPHY entry from gpio-line-names in gpio1 nodes of phyCORE-i.MX8MM and phyBOARD-Polis-i.MX8MM devicetrees. Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support") Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18arm64: dts: phycore-imx8mm: Label typo-fix of VPUYashwanth Varakala1-1/+1
Corrected the label of the VPU regulator node (buck 3) from reg_vdd_gpu to reg_vdd_vpu. Fixes: ae6847f26ac9 ("arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support") Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-17arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrlTim Harvey1-0/+4
The GW7904 does not connect the VDD_MIPI power rails thus MIPI is disabled. However we must also disable disp_blk_ctrl as it uses the pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will fail to probe: imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi" imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110 Fixes: b999bdaf0597 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-17arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrlTim Harvey1-0/+4
The GW7903 does not connect the VDD_MIPI power rails thus MIPI is disabled. However we must also disable disp_blk_ctrl as it uses the pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will fail to probe: imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi" imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110 Fixes: a72ba91e5bc7 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7903 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-15KVM: arm64: Fix the name of sys_reg_desc related to PMUXiang Chen1-20/+21
For those PMU system registers defined in sys_reg_descs[], use macro PMU_SYS_REG() / PMU_PMEVCNTR_EL0 / PMU_PMEVTYPER_EL0 to define them, and later two macros call macro PMU_SYS_REG() actually. Currently the input parameter of PMU_SYS_REG() is another macro which is calculation formula of the value of system registers, so for example, if we want to "SYS_PMINTENSET_EL1" as the name of sys register, actually the name we get is as following: (((3) << 19) | ((0) << 16) | ((9) << 12) | ((14) << 8) | ((1) << 5)) The name of system register is used in some tracepoints such as trace_kvm_sys_access(), if not set correctly, we need to analyze the inaccurate name to get the exact name (which also is inconsistent with other system registers), and also the inaccurate name occupies more space. To fix the issue, use the name as a input parameter of PMU_SYS_REG like MTE_REG or EL2_REG. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1689305920-170523-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-15KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCountOliver Upton1-1/+0
The PMU event ID varies from 10 to 16 bits, depending on the PMU version. If the PMU only supports 10 bits of event ID, bits [15:10] of the evtCount field behave as RES0. While the actual PMU emulation code gets this right (i.e. RES0 bits are masked out when programming the perf event), the sysreg emulation writes an unmasked value to the in-memory cpu context. The net effect is that guest reads and writes of PMEVTYPER<n>_EL0 will see non-RES0 behavior in the reserved bits of the field. As it so happens, kvm_pmu_set_counter_event_type() already writes a masked value to the in-memory context that gets overwritten by access_pmu_evtyper(). Fix the issue by removing the unnecessary (and incorrect) register write in access_pmu_evtyper(). Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com> Link: https://lore.kernel.org/r/20230713221649.3889210-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-14KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemptionMarc Zyngier4-5/+12
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when running a preemptible kernel, as it is possible that a vCPU is blocked without requesting a doorbell interrupt. The issue is that any preemption that occurs between vgic_v4_put() and schedule() on the block path will mark the vPE as nonresident and *not* request a doorbell irq. This occurs because when the vcpu thread is resumed on its way to block, vcpu_load() will make the vPE resident again. Once the vcpu actually blocks, we don't request a doorbell anymore, and the vcpu won't be woken up on interrupt delivery. Fix it by tracking that we're entering WFI, and key the doorbell request on that flag. This allows us not to make the vPE resident when going through a preempt/schedule cycle, meaning we don't lose any state. Cc: stable@vger.kernel.org Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Suggested-by: Zenghui Yu <yuzenghui@huawei.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Co-developed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-13arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlinkSudeep Holla1-1/+0
Commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") moved all arm vendor specific DTS into the sub-directory and updated vexpress-v2f-1xv7-ca53x2.dts accordingly to include vexpress-v2m-rs1.dtsi from the right path. However the symlink was left dangling which is harmless and causes no issue for the build. Just remove the dangling symlink now that it is noticed and reported. Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Reported-by: Avram Lubkin <avram@rockhopper.net> Reported-by: Darren Kenny <darren.kenny@oracle.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/r/20230706085534.300828-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-07-13arm64: Fix HFGxTR_EL2 field namingMarc Zyngier1-6/+6
The HFGxTR_EL2 fields do not always follow the naming described in the spec, nor do they match the name of the register they trap in the rest of the kernel. It is a bit sad that they were written by hand despite the availability of a machine readable version... Fixes: cc077e7facbe ("arm64/sysreg: Convert HFG[RW]TR_EL2 to automatic generation") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.org> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230703130416.1495307-1-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2023-07-13KVM: arm64: Add missing BTI instructionsMostafa Saleh3-1/+19
Some bti instructions were missing from commit b53d4a272349 ("KVM: arm64: Use BTI for nvhe") 1) kvm_host_psci_cpu_entry kvm_host_psci_cpu_entry is called from __kvm_hyp_init_cpu through "br" instruction as __kvm_hyp_init_cpu resides in idmap section while kvm_host_psci_cpu_entry is in hyp .text so the offset is larger than 128MB range covered by "b". Which means that this function should start with "bti j" instruction. LLVM which is the only compiler supporting BTI for Linux, adds "bti j" for jump tables or by when taking the address of the block [1]. Same behaviour is observed with GCC. As kvm_host_psci_cpu_entry is a C function, this must be done in assembly. Another solution is to use X16/X17 with "br", as according to ARM ARM DDI0487I.a RLJHCL/IGMGRS, PACIASP has an implicit branch target identification instruction that is compatible with PSTATE.BTYPE 0b01 which includes "br X16/X17" And the kvm_host_psci_cpu_entry has PACIASP as it is an external function. Although, using explicit "bti" makes it more clear than relying on which register is used. A third solution is to clear SCTLR_EL2.BT, which would make PACIASP compatible PSTATE.BTYPE 0b11 ("br" to other registers). However this deviates from the kernel behaviour (in bti_enable()). 2) Spectre vector table "br" instructions are generated at runtime for the vector table (__bp_harden_hyp_vecs). These branches would land on vectors in __kvm_hyp_vector at offset 8. As all the macros are defined with valid_vect/invalid_vect, it is sufficient to add "bti j" at the correct offset. [1] https://reviews.llvm.org/D52867 Fixes: b53d4a272349 ("KVM: arm64: Use BTI for nvhe") Signed-off-by: Mostafa Saleh <smostafa@google.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20230706152240.685684-1-smostafa@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-12KVM: arm64: Correctly handle page aging notifiers for unaligned memslotOliver Upton3-36/+55
Userspace is allowed to select any PAGE_SIZE aligned hva to back guest memory. This is even the case with hugepages, although it is a rather suboptimal configuration as PTE level mappings are used at stage-2. The arm64 page aging handlers have an assumption that the specified range is exactly one page/block of memory, which in the aforementioned case is not necessarily true. All together this leads to the WARN() in kvm_age_gfn() firing. However, the WARN is only part of the issue as the table walkers visit at most a single leaf PTE. For hugepage-backed memory in a memslot that isn't hugepage-aligned, page aging entirely misses accesses to the hugepage beyond the first page in the memslot. Add a new walker dedicated to handling page aging MMU notifiers capable of walking a range of PTEs. Convert kvm(_test)_age_gfn() over to the new walker and drop the WARN that caught the issue in the first place. The implementation of this walker was inspired by the test_clear_young() implementation by Yu Zhao [*], but repurposed to address a bug in the existing aging implementation. Cc: stable@vger.kernel.org # v5.15 Fixes: 056aad67f836 ("kvm: arm/arm64: Rework gpa callback handlers") Link: https://lore.kernel.org/kvmarm/20230526234435.662652-6-yuzhao@google.com/ Co-developed-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Yu Zhao <yuzhao@google.com> Reported-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Link: https://lore.kernel.org/r/20230627235405.4069823-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-12tracing: arm64: Avoid missing-prototype warningsArnd Bergmann3-3/+7
These are all tracing W=1 warnings in arm64 allmodconfig about missing prototypes: kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro totypes] kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes] kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes] kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes] kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes] kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes] arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes] arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes] arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes] Move the declarations to an appropriate header where they can be seen by the caller and callee, and make sure the headers are included where needed. Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Florent Revest <revest@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-11arm64: dts: stratix10: fix incorrect I2C property for SCL signalDinh Nguyen2-2/+2
The correct dts property for the SCL falling time is "i2c-scl-falling-time-ns". Fixes: c8da1d15b8a4 ("arm64: dts: stratix10: i2c clock running out of spec") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2023-07-11KVM: arm64: Disable preemption in kvm_arch_hardware_enable()Marc Zyngier1-1/+12
Since 0bf50497f03b ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock"), hotplugging back a CPU whilst a guest is running results in a number of ugly splats as most of this code expects to run with preemption disabled, which isn't the case anymore. While the context is preemptable, it isn't migratable, which should be enough. But we have plenty of preemptible() checks all over the place, and our per-CPU accessors also disable preemption. Since this affects released versions, let's do the easy fix first, disabling preemption in kvm_arch_hardware_enable(). We can always revisit this with a more invasive fix in the future. Fixes: 0bf50497f03b ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Reported-by: Kristina Martsenko <kristina.martsenko@arm.com> Tested-by: Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/aeab7562-2d39-e78e-93b1-4711f8cc3fa5@arm.com Cc: stable@vger.kernel.org # v6.3, v6.4 Link: https://lore.kernel.org/r/20230703163548.1498943-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-11KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvmSudeep Holla3-2/+10
Currently there is no synchronisation between finalize_pkvm() and kvm_arm_init() initcalls. The finalize_pkvm() proceeds happily even if kvm_arm_init() fails resulting in the following warning on all the CPUs and eventually a HYP panic: | kvm [1]: IPA Size Limit: 48 bits | kvm [1]: Failed to init hyp memory protection | kvm [1]: error initializing Hyp mode: -22 | | <snip> | | WARNING: CPU: 0 PID: 0 at arch/arm64/kvm/pkvm.c:226 _kvm_host_prot_finalize+0x30/0x50 | Modules linked in: | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | pstate: 634020c5 (nZCv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) | pc : _kvm_host_prot_finalize+0x30/0x50 | lr : __flush_smp_call_function_queue+0xd8/0x230 | | Call trace: | _kvm_host_prot_finalize+0x3c/0x50 | on_each_cpu_cond_mask+0x3c/0x6c | pkvm_drop_host_privileges+0x4c/0x78 | finalize_pkvm+0x3c/0x5c | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | Failed to finalize Hyp protection: -22 | dtb=fvp-base-revc.dtb | kvm [95]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:540! | kvm [95]: nVHE call trace: | kvm [95]: [<ffff800081052984>] __kvm_nvhe_hyp_panic+0xac/0xf8 | kvm [95]: [<ffff800081059644>] __kvm_nvhe_handle_host_mem_abort+0x1a0/0x2ac | kvm [95]: [<ffff80008105511c>] __kvm_nvhe_handle_trap+0x4c/0x160 | kvm [95]: [<ffff8000810540fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 | kvm [95]: ---[ end nVHE call trace ]--- | kvm [95]: Hyp Offset: 0xfffe8db00ffa0000 | Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 | CPU: 3 PID: 95 Comm: kworker/u16:2 Tainted: G W 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | Workqueue: rpciod rpc_async_schedule | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x138/0x33c | nvhe_hyp_panic_handler+0x100/0x184 | new_slab+0x23c/0x54c | ___slab_alloc+0x3e4/0x770 | kmem_cache_alloc_node+0x1f0/0x278 | __alloc_skb+0xdc/0x294 | tcp_stream_alloc_skb+0x2c/0xf0 | tcp_sendmsg_locked+0x3d0/0xda4 | tcp_sendmsg+0x38/0x5c | inet_sendmsg+0x44/0x60 | sock_sendmsg+0x1c/0x34 | xprt_sock_sendmsg+0xdc/0x274 | xs_tcp_send_request+0x1ac/0x28c | xprt_transmit+0xcc/0x300 | call_transmit+0x78/0x90 | __rpc_execute+0x114/0x3d8 | rpc_async_schedule+0x28/0x48 | process_one_work+0x1d8/0x314 | worker_thread+0x248/0x474 | kthread+0xfc/0x184 | ret_from_fork+0x10/0x20 | SMP: stopping secondary CPUs | Kernel Offset: 0x57c5cb460000 from 0xffff800080000000 | PHYS_OFFSET: 0x80000000 | CPU features: 0x00000000,1035b7a3,ccfe773f | Memory Limit: none | ---[ end Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 ]--- Fix it by checking for the successfull initialisation of kvm_arm_init() in finalize_pkvm() before proceeding any futher. Fixes: 87727ba2bb05 ("KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege") Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230704193243.3300506-1-sudeep.holla@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-11KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bitsMarc Zyngier1-3/+3
It recently appeared that, when running VHE, there is a notable difference between using CNTKCTL_EL1 and CNTHCTL_EL2, despite what the architecture documents: - When accessed from EL2, bits [19:18] and [16:10] of CNTKCTL_EL1 have the same assignment as CNTHCTL_EL2 - When accessed from EL1, bits [19:18] and [16:10] are RES0 It is all OK, until you factor in NV, where the EL2 guest runs at EL1. In this configuration, CNTKCTL_EL11 doesn't trap, nor ends up in the VNCR page. This means that any write from the guest affecting CNTHCTL_EL2 using CNTKCTL_EL1 ends up losing some state. Not good. The fix it obvious: don't use CNTKCTL_EL1 if you want to change bits that are not part of the EL1 definition of CNTKCTL_EL1, and use CNTHCTL_EL2 instead. This doesn't change anything for a bare-metal OS, and fixes it when running under NV. The NV hypervisor will itself have to work harder to merge the two accessors. Note that there is a pending update to the architecture to address this issue by making the affected bits UNKNOWN when CNTKCTL_EL1 is used from EL2 with VHE enabled. Fixes: c605ee245097 ("KVM: arm64: timers: Allow physical offset without CNTPOFF_EL2") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v6.4 Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20230627140557.544885-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-11arm64: ftrace: Add direct call trampoline samples supportFlorent Revest1-0/+2
The ftrace samples need per-architecture trampoline implementations to save and restore argument registers around the calls to my_direct_func* and to restore polluted registers (eg: x30). These samples also include <asm/asm-offsets.h> which, on arm64, is not necessary and redefines previously defined macros (resulting in warnings) so these includes are guarded by !CONFIG_ARM64. Link: https://lkml.kernel.org/r/20230427140700.625241-3-revest@chromium.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-07Merge tag 'trace-v6.5-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix bad git merge of #endif in arm64 code A merge of the arm64 tree caused #endif to go into the wrong place - Fix crash on lseek of write access to tracefs/error_log Opening error_log as write only, and then doing an lseek() causes a kernel panic, because the lseek() handle expects a "seq_file" to exist (which is not done on write only opens). Use tracing_lseek() that tests for this instead of calling the default seq lseek handler. - Check for negative instead of -E2BIG for error on strscpy() returns Instead of testing for -E2BIG from strscpy(), to be more robust, check for less than zero, which will make sure it catches any error that strscpy() may someday return. * tag 'trace-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/boot: Test strscpy() against less than zero for error arm64: ftrace: fix build error with CONFIG_FUNCTION_GRAPH_TRACER=n tracing: Fix null pointer dereference in tracing_err_log_open()
2023-07-06Merge tag 'asm-generic-6.5' of ↵Linus Torvalds2-25/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are cleanups for architecture specific header files: - the comments in include/linux/syscalls.h have gone out of sync and are really pointless, so these get removed - The asm/bitsperlong.h header no longer needs to be architecture specific on modern compilers, so use a generic version for newer architectures that use new enough userspace compilers - A cleanup for virt_to_pfn/virt_to_bus to have proper type checking, forcing the use of pointers" * tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Remove file path comments from headers tools arch: Remove uapi bitsperlong.h of hexagon and microblaze asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch m68k/mm: Make pfn accessors static inlines arm64: memory: Make virt_to_pfn() a static inline ARM: mm: Make virt_to_pfn() a static inline asm-generic/page.h: Make pfn accessors static inlines xen/netback: Pass (void *) to virt_to_page() netfs: Pass a pointer to virt_to_page() cifs: Pass a pointer to virt_to_page() in cifsglob cifs: Pass a pointer to virt_to_page() riscv: mm: init: Pass a pointer to virt_to_page() ARC: init: Pass a pointer to virt_to_pfn() in init m68k: Pass a pointer to virt_to_pfn() virt_to_page() fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
2023-07-05arm64: ftrace: fix build error with CONFIG_FUNCTION_GRAPH_TRACER=nArnd Bergmann1-1/+1
It appears that a merge conflict ended up hiding a newly added constant in some configurations: arch/arm64/kernel/entry-ftrace.S: Assembler messages: arch/arm64/kernel/entry-ftrace.S:59: Error: undefined symbol FTRACE_OPS_DIRECT_CALL used as an immediate value FTRACE_OPS_DIRECT_CALL is still used when CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled, even if CONFIG_FUNCTION_GRAPH_TRACER is disabled, so change the ifdef accordingly. Link: https://lkml.kernel.org/r/20230623152204.2216297-1-arnd@kernel.org Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Fixes: 3646970322464 ("arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florent Revest <revest@chromium.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-04Merge tag 'core_guards_for_6.5_rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue Pull scope-based resource management infrastructure from Peter Zijlstra: "These are the first few patches in the Scope-based Resource Management series that introduce the infrastructure but not any conversions as of yet. Adding the infrastructure now allows multiple people to start using them. Of note is that Sparse will need some work since it doesn't yet understand this attribute and might have decl-after-stmt issues" * tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue: kbuild: Drop -Wdeclaration-after-statement locking: Introduce __cleanup() based infrastructure apparmor: Free up __cleanup() name dmaengine: ioat: Free up __cleanup() name
2023-07-04arch/arm64/mm/fault: Fix undeclared variable error in do_page_fault()SeongJae Park1-2/+0
Commit ae870a68b5d1 ("arm64/mm: Convert to using lock_mm_and_find_vma()") made do_page_fault() to use 'vma' even if CONFIG_PER_VMA_LOCK is not defined, but the declaration is still in the ifdef. As a result, building kernel without the config fails with undeclared variable error as below: arch/arm64/mm/fault.c: In function 'do_page_fault': arch/arm64/mm/fault.c:624:2: error: 'vma' undeclared (first use in this function); did you mean 'vmap'? 624 | vma = lock_mm_and_find_vma(mm, addr, regs); | ^~~ | vmap Fix it by moving the declaration out of the ifdef. Fixes: ae870a68b5d1 ("arm64/mm: Convert to using lock_mm_and_find_vma()") Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds45-442/+2423
Pull kvm updates from Paolo Bonzini: "ARM64: - Eager page splitting optimization for dirty logging, optionally allowing for a VM to avoid the cost of hugepage splitting in the stage-2 fault path. - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with services that live in the Secure world. pKVM intervenes on FF-A calls to guarantee the host doesn't misuse memory donated to the hyp or a pKVM guest. - Support for running the split hypervisor with VHE enabled, known as 'hVHE' mode. This is extremely useful for testing the split hypervisor on VHE-only systems, and paves the way for new use cases that depend on having two TTBRs available at EL2. - Generalized framework for configurable ID registers from userspace. KVM/arm64 currently prevents arbitrary CPU feature set configuration from userspace, but the intent is to relax this limitation and allow userspace to select a feature set consistent with the CPU. - Enable the use of Branch Target Identification (FEAT_BTI) in the hypervisor. - Use a separate set of pointer authentication keys for the hypervisor when running in protected mode, as the host is untrusted at runtime. - Ensure timer IRQs are consistently released in the init failure paths. - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps (FEAT_EVT), as it is a register commonly read from userspace. - Erratum workaround for the upcoming AmpereOne part, which has broken hardware A/D state management. RISC-V: - Redirect AMO load/store misaligned traps to KVM guest - Trap-n-emulate AIA in-kernel irqchip for KVM guest - Svnapot support for KVM Guest s390: - New uvdevice secret API - CMM selftest and fixes - fix racy access to target CPU for diag 9c x86: - Fix missing/incorrect #GP checks on ENCLS - Use standard mmu_notifier hooks for handling APIC access page - Drop now unnecessary TR/TSS load after VM-Exit on AMD - Print more descriptive information about the status of SEV and SEV-ES during module load - Add a test for splitting and reconstituting hugepages during and after dirty logging - Add support for CPU pinning in demand paging test - Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes included along the way - Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage recovery threads (because nx_huge_pages=off can be toggled at runtime) - Move handling of PAT out of MTRR code and dedup SVM+VMX code - Fix output of PIC poll command emulation when there's an interrupt - Add a maintainer's handbook to document KVM x86 processes, preferred coding style, testing expectations, etc. - Misc cleanups, fixes and comments Generic: - Miscellaneous bugfixes and cleanups Selftests: - Generate dependency files so that partial rebuilds work as expected" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits) Documentation/process: Add a maintainer handbook for KVM x86 Documentation/process: Add a label for the tip tree handbook's coding style KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index RISC-V: KVM: Remove unneeded semicolon RISC-V: KVM: Allow Svnapot extension for Guest/VM riscv: kvm: define vcpu_sbi_ext_pmu in header RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip RISC-V: KVM: Add in-kernel emulation of AIA APLIC RISC-V: KVM: Implement device interface for AIA irqchip RISC-V: KVM: Skeletal in-kernel AIA irqchip support RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero RISC-V: KVM: Add APLIC related defines RISC-V: KVM: Add IMSIC related defines RISC-V: KVM: Implement guest external interrupt line management KVM: x86: Remove PRIx* definitions as they are solely for user space s390/uv: Update query for secret-UVCs s390/uv: replace scnprintf with sysfs_emit s390/uvdevice: Add 'Lock Secret Store' UVC ...
2023-07-01Merge tag 'arm64-fixes' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix memory corruption (overwriting the kmalloc redzone) when saving the SVE state while in SVE streaming mode" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
2023-07-01Merge tag 'kvmarm-6.5' of ↵Paolo Bonzini53-612/+2577
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.5 - Eager page splitting optimization for dirty logging, optionally allowing for a VM to avoid the cost of block splitting in the stage-2 fault path. - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with services that live in the Secure world. pKVM intervenes on FF-A calls to guarantee the host doesn't misuse memory donated to the hyp or a pKVM guest. - Support for running the split hypervisor with VHE enabled, known as 'hVHE' mode. This is extremely useful for testing the split hypervisor on VHE-only systems, and paves the way for new use cases that depend on having two TTBRs available at EL2. - Generalized framework for configurable ID registers from userspace. KVM/arm64 currently prevents arbitrary CPU feature set configuration from userspace, but the intent is to relax this limitation and allow userspace to select a feature set consistent with the CPU. - Enable the use of Branch Target Identification (FEAT_BTI) in the hypervisor. - Use a separate set of pointer authentication keys for the hypervisor when running in protected mode, as the host is untrusted at runtime. - Ensure timer IRQs are consistently released in the init failure paths. - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps (FEAT_EVT), as it is a register commonly read from userspace. - Erratum workaround for the upcoming AmpereOne part, which has broken hardware A/D state management. As a consequence of the hVHE series reworking the arm64 software features framework, the for-next/module-alloc branch from the arm64 tree comes along for the ride.
2023-07-01Merge tag 'v6.5-p1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ...
2023-06-30Merge tag 'trace-v6.5' of ↵Linus Torvalds4-13/+50
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. * tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix warnings when building htmldocs for function graph retval riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing/boot: Replace strlcpy with strscpy tracing/timerlat: Add user-space interface tracing/osnoise: Skip running osnoise if all instances are off tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable ftrace: Show all functions with addresses in available_filter_functions_addrs selftests/ftrace: Add funcgraph-retval test case LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex function_graph: Support recording and printing the return value of function fgraph: Add declaration of "struct fgraph_ret_regs"
2023-06-30Merge tag 'soc-defconfig-6.5' of ↵Linus Torvalds1-1/+31
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Arnd Bergmann: "The arm64 defconfig file gets the usual updates to enable addition device drivers as well as the sparx5 and realtek SoC platforms. For arm32, there are only a couple of cleanup patches for imx, renesas and rockchips" * tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits) arm64: defconfig: Enable Rockchip I2S TDM and ES8316 drivers arm64: defconfig: update RK8XX MFD config ARM: multi_v7_defconfig: update MFD_RK808 name arm64: defconfig: Enable UBIFS arm64: defconfig: enable drivers for Verdin AM62 arm64: defconfig: Build SM6115 display and GPU clock controller drivers arm64: defconfig: Build display clock controller driver for QCM2290 arm64: defconfig: Build interconnect driver for QCM2290 arm64: defconfig: Build Global Clock Controller driver for QCM2290 arm64: defconfig: Build MSM power manager driver arm64: defconfig: Enable sc828x0xp lpasscc clock controller arm64: defconfig: Enable the TI SN65DSI83 driver arm64: defconfig: Enable Renesas MTU3a counter config arm64: defconfig: enable Mediatek PMIC key arm64: defconfig: enable MT6357 regulator ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config arm64: defconfig: Enable ipq6018 apss clock and PLL controller arm64: defconfig: Enable ARCH_SPARX5 and ARCH_REALTEK arm64: defconfig: enable FSA4480 driver as module ARM: shmobile: defconfig: Refresh for v6.4-rc1 ...
2023-06-30Merge tag 'soc-newsoc-6.5' of ↵Linus Torvalds19-0/+1026
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ...
2023-06-30Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds453-5036/+38517
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
2023-06-29Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-14/+1
Pull drm updates from Dave Airlie: "There is one set of patches to misc for a i915 gsc/mei proxy driver. Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots of refactoring. core: - replace strlcpy with strscpy - EDID changes to support further conversion to struct drm_edid - Move i915 DSC parameter code to common DRM helpers - Add Colorspace functionality aperture: - ignore framebuffers with non-primary devices fbdev: - use fbdev i/o helpers - add Kconfig options for fb_ops helpers - use new fb io helpers directly in drivers sysfs: - export DRM connector ID scheduler: - Avoid an infinite loop ttm: - store function table in .rodata - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() bridge: - fsl-ldb: support i.MX6SX - lt9211, lt9611: remove blanking packets - tc358768: implement input bus formats, devm cleanups - ti-snd65dsi86: implement wait_hpd_asserted - analogix: fix endless probe loop - samsung-dsim: support swapped clock, fix enabling, support var clock - display-connector: Add support for external power supply - imx: Fix module linking - tc358762: Support reset GPIO panel: - nt36523: Support Lenovo J606F - st7703: Support Anbernic RG353V-V2 - InnoLux G070ACE-L01 support - boe-tv101wum-nl6: Improve initialization - sharp-ls043t1le001: Mode fixes - simple: BOE EV121WXM-N10-1850, S6D7AA0 - Ampire AM-800480L1TMQW-T00H - Rocktech RK043FN48H - Starry himax83102-j02 - Starry ili9882t amdgpu: - add new ctx query flag to handle reset better - add new query/set shadow buffer for rdna3 - DCN 3.2/3.1.x/3.0.x updates - Enable DC_FP on loongarch - PCIe fix for RDNA2 - improve DC FAMS/SubVP support for better power management - partition support for lots of engines - Take NUMA into account when allocating memory - Add new DRM_AMDGPU_WERROR config parameter to help with CI - Initial SMU13 overdrive support - Add support for new colorspace KMS API - W=1 fixes amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions - Add debugger interface for enabling gdb - Add KFD event age tracking radeon: - Fix possible UAF i915: - new getparam for PXP support - GSC/MEI proxy driver - Meteorlake display enablement - avoid clearing preallocated framebuffers with TTM - implement framebuffer mmap support - Disable sampler indirect state in bindless heap - Enable fdinfo for GuC backends - GuC loading and firmware table handling fixes - Various refactors for multi-tile enablement - Define MOCS and PAT tables for MTL - GSC/MEI support for Meteorlake - PMU multi-tile support - Large driver kernel doc cleanup - Allow VRR toggling and arbitrary refresh rates - Support async flips on linear buffers on display ver 12+ - Expose CRTC CTM property on ILK/SNB/VLV - New debugfs for display clock frequencies - Hotplug refactoring - Display refactoring - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake - Use large rings for compute contexts - HuC loading for MTL - Allow user to set cache at BO creation - MTL powermanagement enhancements - Switch to dedicated workqueues to stop using flush_scheduled_work() - Move display runtime init under display/ - Remove 10bit gamma on desktop gen3 parts, they don't support it habanalabs: - uapi: return 0 for user queries if there was a h/w or f/w error - Add pci health check when we lose connection with the firmware. This can be used to distinguish between pci link down and firmware getting stuck. - Add more info to the error print when TPC interrupt occur. - Firmware fixes msm: - Adreno A660 bindings - SM8350 MDSS bindings fix - Added support for DPU on sm6350 and sm6375 platforms - Implemented tearcheck support to support vsync on SM150 and newer platforms - Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450 - Added support for DSI and 28nm DSI PHY on MSM8226 platform - Added support for DSI on sm6350 and sm6375 platforms - Added support for display controller on MSM8226 platform - A690 GPU support - Move cmdstream dumping out of fence signaling path - a610 support - Support for a6xx devices without GMU nouveau: - NULL ptr before deref fixes armada: - implement fbdev emulation as client sun4i: - fix mipi-dsi dotclock - release clocks vc4: - rgb range toggle property - BT601 / BT2020 HDMI support vkms: - convert to drmm helpers - add reflection and rotation support - fix rgb565 conversion gma500: - fix iomem access shmobile: - support renesas soc platform - enable fbdev mxsfb: - Add support for i.MX93 LCDIF stm: - dsi: Use devm_ helper - ltdc: Fix potential invalid pointer deref renesas: - Group drivers in renesas subdirectory to prepare for new platform - Drop deprecated R-Car H3 ES1.x support meson: - Add support for MIPI DSI displays virtio: - add sync object support mediatek: - Add display binding document for MT6795" * tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits) drm/i915: Fix a NULL vs IS_ERR() bug drm/i915: make i915_drm_client_fdinfo() reference conditional again drm/i915/huc: Fix missing error code in intel_huc_init() drm/i915/gsc: take a wakeref for the proxy-init-completion check drm/msm/a6xx: Add A610 speedbin support drm/msm/a6xx: Add A619_holi speedbin support drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching drm/msm/a6xx: Use "else if" in GPU speedbin rev matching drm/msm/a6xx: Fix some A619 tunables drm/msm/a6xx: Add A610 support drm/msm/a6xx: Add support for A619_holi drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations drm/msm/a6xx: Introduce GMU wrapper support drm/msm/a6xx: Move CX GMU power counter enablement to hw_init drm/msm/a6xx: Extend and explain UBWC config drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init drm/msm/a6xx: Add a helper for software-resetting the GPU drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions() drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off() ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-06 01:14:09 +0300