summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2023-01-14ARM: mmp: fix timer_read delayDoug Brown1-4/+7
[ Upstream commit e348b4014c31041e13ff370669ba3348c4d385e3 ] timer_read() was using an empty 100-iteration loop to wait for the TMR_CVWR register to capture the latest timer counter value. The delay wasn't long enough. This resulted in CPU idle time being extremely underreported on PXA168 with CONFIG_NO_HZ_IDLE=y. Switch to the approach used in the vendor kernel, which implements the capture delay by reading TMR_CVWR a few times instead. Fixes: 49cbe78637eb ("[ARM] pxa: add base support for Marvell's PXA168 processor line") Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20221204005117.53452-3-doug@schmorgal.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: turris-omnia: Add switch port 6 nodePali Rohár1-1/+11
[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ] Switch port 6 is connected to eth0, so add appropriate device tree node for it. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: turris-omnia: Add ethernet aliasesPali Rohár1-0/+6
[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ] This allows bootloader to correctly pass MAC addresses used by bootloader to individual interfaces into kernel device tree. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root PortPali Rohár1-3/+3
[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root PortPali Rohár2-5/+5
[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root PortPali Rohár1-1/+1
[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root PortPali Rohár2-12/+12
[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP") Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable") Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root PortPali Rohár1-1/+1
[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: dove: Fix assigned-addresses for every PCIe Root PortPali Rohár1-1/+1
[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14arm: dts: spear600: Fix clcd interruptKory Maincent1-1/+1
[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ] Interrupt 12 of the Interrupt controller belongs to the SMI controller, the right one for the display controller is the interrupt 13. Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: stm32: Fix AV96 WLAN regulator gpio propertyMarek Vasut1-1/+1
[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ] The WLAN regulator uses 'gpios' property instead of 'gpio' to specify regulator enable GPIO. While the former is also currently handled by the Linux kernel regulator-fixed driver, the later is the correct one per DT bindings. Update the DT to use the later. Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96Marek Vasut1-1/+0
[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ] The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the stm32mp15xc.dtsi which should only be included in DTs of devices which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi enables CRYP block not present in the STM32MP15xA/D SoC . Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14ARM: dts: qcom: apq8064: fix coresight compatibleLuca Weiss1-1/+1
[ Upstream commit a42b1ee868361f1cb0492f1bdaefb43e0751e468 ] There's a typo missing the arm, prefix of arm,coresight-etb10. Fix it to make devicetree validation happier. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013190657.48499-3-luca@z3ntu.xyz Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-04arch: setup PF_IO_WORKER threads like PF_KTHREADJens Axboe1-1/+1
[ Upstream commit 4727dc20e0422211a0e0c72b1ace4ed6096df8a6 ] PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the sense that we don't assign ->set_child_tid with our own structure. Just ensure that every arch sets up the PF_IO_WORKER threads like kthreads in the arch implementation of copy_thread(). Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-04arm: add support for TIF_NOTIFY_SIGNALJens Axboe4-6/+11
[ Upstream commit 32d59773da38cd83e497a70eb9754d4bbae3aeae ] Wire up TIF_NOTIFY_SIGNAL handling for arm. Cc: linux-arm-kernel@lists.infradead.org Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14Revert "ARM: dts: imx7: Fix NAND controller size-cells"Francesco Dolcini1-2/+2
commit ef19964da8a668c683f1d38274f6fb756e047945 upstream. This reverts commit 753395ea1e45c724150070b5785900b6a44bd5fb. It introduced a boot regression on colibri-imx7, and potentially any other i.MX7 boards with MTD partition list generated into the fdt by U-Boot. While the commit we are reverting here is not obviously wrong, it fixes only a dt binding checker warning that is non-functional, while it introduces a boot regression and there is no obvious fix ready. Fixes: 753395ea1e45 ("ARM: dts: imx7: Fix NAND controller size-cells") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/ Link: https://lore.kernel.org/all/20221205144917.6514168a@xps-13/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188Johan Jonker2-1/+7
[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ] The clock source and the sched_clock provided by the arm_global_timer on Rockchip rk3066a/rk3188 are quite unstable because their rates depend on the CPU frequency. Recent changes to the arm_global_timer driver makes it impossible to use. On the other side, the arm_global_timer has a higher rating than the ROCKCHIP_TIMER, it will be selected by default by the time framework while we want to use the stable Rockchip clock source. Keep the arm_global_timer disabled in order to have the DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementationGiulio Benetti3-13/+28
[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ] Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to ``` virt_to_page(0) ``` that in order expands to: ``` pfn_to_page(virt_to_pfn(0)) ``` and then virt_to_pfn(0) to: ``` ((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) + PHYS_PFN_OFFSET) ``` where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of DRAM(0x80000000). When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page gets an address that is out of DRAM bounds. So instead of using fake virtual page 0 let's allocate a dedicated zero_page during paging_init() and assign it to a global 'struct page * empty_zero_page' the same way mmu.c does and it's the same approach used in m68k with commit dc068f462179 as discussed here[0]. Then let's move ZERO_PAGE() definition to the top of pgtable.h to be in common between mmu.c and nommu.c. [0]: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#m1266ceb63 ad140743174d6b3070364d3c9a5179b Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernelsTomislav Novak1-1/+1
[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ] Store the frame address where arm_get_current_stackframe() looks for it (ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp gets set to 0, causing unwind_frame() to fail. # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }' Attaching 1 probe... @[ __schedule+1059 ]: 1 A typical first unwind instruction is 0x97 (SP = R7), so after executing it SP ends up being 0 and -URC_FAILURE is returned. unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000) unwind_find_idx(ac9da7d7) unwind_exec_insn: insn = 00000097 unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000 With this patch: # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }' Attaching 1 probe... @[ __schedule+1059 __schedule+1059 schedule+79 schedule_hrtimeout_range_clock+163 schedule_hrtimeout_range+17 ep_poll+471 SyS_epoll_wait+111 sys_epoll_pwait+231 __ret_fast_syscall+1 ]: 1 Link: https://lore.kernel.org/r/20220920230728.2617421-1-tnovak@fb.com/ Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomislav Novak <tnovak@fb.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node nameJohan Jonker1-1/+1
[ Upstream commit 11871e20bcb23c00966e785a124fb72bc8340af4 ] The lcdc1-rgb24 node name is out of line with the rest of the rk3188 lcdc1 node, so fix it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ARM: dts: rockchip: fix ir-receiver node namesJohan Jonker1-1/+1
[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ] Fix ir-receiver node names on Rockchip boards, so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14arm: dts: rockchip: fix node name for hym8563 rtcSebastian Reichel5-5/+5
[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ] Fix the node name for hym8563 in all arm rockchip devicetrees. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08ARM: at91: rm9200: fix usb device clock idMichael Grzeschik1-1/+1
[ Upstream commit 57976762428675f259339385d3324d28ee53ec02 ] Referring to the datasheet the index 2 is the MCKUDP. When enabled, it "Enables the automatic disable of the Master Clock of the USB Device Port when a suspend condition occurs". We fix the index to the real UDP id which "Enables the 48 MHz clock of the USB Device Port". Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: mturquette@baylibre.com Cc: sboyd@kernel.org Cc: claudiu.beznea@microchip.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver") Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency propertiesFabio Estevam1-2/+2
[ Upstream commit e68be7b39f21d8a9291a5a3019787cd3ca999dd7 ] make dtbs_check gives the following errors: ref-clock-frequency: size (9) error for type uint32 tcxo-clock-frequency: size (9) error for type uint32 Fix it by passing the frequencies inside < > as documented in Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02ARM: mxs: fix memory leak in mxs_machine_init()Zheng Yongjun1-1/+3
[ Upstream commit f31e3c204d1844b8680a442a48868af5ac3d5481 ] If of_property_read_string() failed, 'soc_dev_attr' should be freed before return. Otherwise there is a memory leak. Fixes: 2046338dcbc6 ("ARM: mxs: Use soc bus infrastructure") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrlMichael Grzeschik1-0/+9
[ Upstream commit 40a2226e8bfacb79dd154dea68febeead9d847e9 ] We set the PIOC to GPIO mode. This way the pin becomes an input signal will be usable by the controller. Without this change the udc on the 9g20ek does not work. Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support") Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02ARM: dts: am335x-pcm-953: Define fixed regulators in root nodeDominik Haller1-15/+13
[ Upstream commit 8950f345a67d8046d2472dd6ea81fa18ef5b4844 ] Remove the regulators node and define fixed regulators in the root node. Prevents the sdhci-omap driver from waiting in probe deferral forever because of the missing vmmc-supply and keeps am335x-pcm-953 consistent with the other Phytec AM335 boards. Fixes: bb07a829ec38 ("ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board") Signed-off-by: Dominik Haller <d.haller@phytec.de> Message-Id: <20221011143115.248003-1-d.haller@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25ARM: dts: imx7: Fix NAND controller size-cellsMarek Vasut1-2/+2
[ Upstream commit 753395ea1e45c724150070b5785900b6a44bd5fb ] The NAND controller size-cells should be 0 per DT bindings. Fix the following warning produces by DT bindings check: " nand-controller@33002000: #size-cells:0:0: 0 was expected nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) " Fix the missing space in node name too. Fixes: e7495a45a76de ("ARM: dts: imx7: add GPMI NAND and APBH DMA") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offsetTim Harvey2-2/+2
[ Upstream commit bb5ad73941dc3f4e3c2241348f385da6501d50ea ] The GW5910 and GW5913 have a user pushbutton that is tied to the Gateworks System Controller GPIO offset 2. Fix the invalid offset of 0. Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx6sx: add missing properties for sramAlexander Stein1-0/+6
[ Upstream commit 415432c008b2bce8138841356ba444631cabaa50 ] All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx6sll: add missing properties for sramAlexander Stein1-0/+3
[ Upstream commit 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 ] All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx6sl: add missing properties for sramAlexander Stein1-0/+3
[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ] All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx6qp: add missing properties for sramAlexander Stein1-0/+6
[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ] All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@940000: '#address-cells' is a required property sram@940000: '#size-cells' is a required property sram@940000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx6dl: add missing properties for sramAlexander Stein1-0/+3
[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ] All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx6q: add missing properties for sramAlexander Stein1-0/+3
[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ] All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: imx7d-sdb: config the max pressure for tsc2046Haibo Chen1-6/+1
[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ] Use the general touchscreen method to config the max pressure for touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for ABS_PRESSURE, when config the same max and min value, weston will meet the following issue, [17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen [17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE [17:19:39.183] event1 - ADS7846 Touchscreen: was rejected [17:19:39.183] event1 - not using input device '/dev/input/event1' This will then cause the APP weston-touch-calibrator can't list touch devices. root@imx6ul7d:~# weston-touch-calibrator could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' No devices listed. And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max" belong to the deprecated properties, so remove them. Also for "ti,x-min", "ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default value in driver, so are redundant, also remove here. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: exynos: fix polarity of VBUS GPIO of OrigenDmitry Torokhov1-1/+1
[ Upstream commit a08137bd1e0a7ce951dce9ce4a83e39d379b6e1b ] EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: Drop CMDLINE_* dependency on ATAGSGeert Uytterhoeven1-1/+0
[ Upstream commit 136f4b1ec7c962ee37a787e095fd37b058d72bd3 ] On arm32, the configuration options to specify the kernel command line type depend on ATAGS. However, the actual CMDLINE cofiguration option does not depend on ATAGS, and the code that handles this is not specific to ATAGS (see drivers/of/fdt.c:early_init_dt_scan_chosen()). Hence users who desire to override the kernel command line on arm32 must enable support for ATAGS, even on a pure-DT system. Other architectures (arm64, loongarch, microblaze, nios2, powerpc, and riscv) do not impose such a restriction. Hence drop the dependency on ATAGS. Fixes: bd51e2f595580fb6 ("ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: exynos: correct s5k6a3 reset polarity on Midas familyDmitry Torokhov1-1/+1
[ Upstream commit 3ba2d4bb9592bf7a6a3fe3dbe711ecfc3d004bab ] According to s5k6a3 driver code, the reset line for the chip appears to be active low. This also matches the typical polarity of reset lines in general. Let's fix it up as having correct polarity in DTS is important when the driver will be switched over to gpiod API. Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: kirkwood: lsxl: remove first ethernet portMichael Walle1-11/+0
[ Upstream commit 2d528eda7c96ce5c70f895854ecd5684bd5d80b9 ] Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet port. This has always been wrong, i.e. the board code used to set up both ports, but the driver will play nice and return -ENODEV if the assiciated PHY is not found. Nevertheless, it is wrong. Remove it. Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: kirkwood: lsxl: fix serial lineMichael Walle1-0/+5
[ Upstream commit 04eabc6ac10fda9424606d9a7ab6ab9a5d95350a ] Commit 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") unknowingly broke the serial output on this board. Before this commit, the pinmux was still configured by the bootloader and the kernel didn't reconfigured it again. This was an oversight by the initial board support where the pinmux for the serial line was never configured by the kernel. But with this commit, the serial line will be reconfigured to the wrong pins. This is especially confusing, because the output still works, but the input doesn't. Presumingly, the input is reconfigured to MPP10, but the output is connected to both MPP11 and MPP5. Override the pinmux in the board device tree. Fixes: 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: dts: turris-omnia: Fix mpp26 pin name and commentMarek Behún1-2/+2
[ Upstream commit 49e93898f0dc177e645c22d0664813567fd9ec00 ] There is a bug in Turris Omnia's schematics, whereupon the MPP[26] pin, which is routed to CN11 pin header, is documented as SPI CS1, but MPP[26] pin does not support this function. Instead it controls chip select 2 if in "spi0" mode. Fix the name of the pin node in pinctrl node and fix the comment in SPI node. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAEWang Kefeng1-0/+4
[ Upstream commit 14ca1a4690750bb54e1049e49f3140ef48958a6e ] MT_MEMORY_RO is introduced by commit 598f0a99fa8a ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable"), which is a readonly memory type for FDT area, but there are some different between ARM_LPAE and non-ARM_LPAE, we need to setup PMD_SECT_AP2 and L_PMD_SECT_RDONLY for MT_MEMORY_RO when ARM_LAPE enabled. non-ARM_LPAE 0xff800000-0xffa00000 2M PGD KERNEL ro NX SHD ARM_LPAE 0xff800000-0xffc00000 4M PMD RW NX SHD ARM_LPAE+fix 0xff800000-0xffc00000 4M PMD ro NX SHD Fixes: 598f0a99fa8a ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()Wang Kefeng1-1/+1
[ Upstream commit 2ccd19b3ffac07cc7e75a2bd1ed779728bb67197 ] After ARM supports p4d page tables, the pg_level for note_page() in walk_pmd() should be 4, not 3, fix it. Fixes: 84e6ffb2c49c ("arm: add support for folded p4d page tables") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-15ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomerSergei Antonov2-3/+3
[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ] Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc". But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt contain compatible = "moxa,moxart-sdhci". Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver. Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different controller from FTSDC010. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-05ARM: dts: am33xx: Fix MMCHS0 dma propertiesYuTong Chang1-2/+1
[ Upstream commit 2eb502f496f7764027b7958d4e74356fed918059 ] According to technical manual(table 11-24), the DMA of MMCHS0 should be direct mapped. Fixes: b5e509066074 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by: YuTong Chang <mtwget@gmail.com> Message-Id: <20220620124146.5330-1-mtwget@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-05ARM: dts: integrator: Tag PCI host with device_typeLinus Walleij1-0/+1
commit 4952aa696a9f221c5e34e5961e02fca41ef67ad6 upstream. The DT parser is dependent on the PCI device being tagged as device_type = "pci" in order to parse memory ranges properly. Fix this up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatibleMarco Felsch1-1/+1
[ Upstream commit af7d78c957017f8b3a0986769f6f18e57f9362ea ] Drop the "winbond,w25q16dw" compatible since it causes to set the MODALIAS to w25q16dw which is not specified within spi-nor id table. Fix this by use the common "jedec,spi-nor" compatible. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-20ARM: dts: imx: align SPI NOR node name with dtschemaKrzysztof Kozlowski32-34/+34
[ Upstream commit ba9fe460dc2cfe90dc115b22af14dd3f13cffa0f ] The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Stable-dep-of: af7d78c95701 ("ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the timeClaudiu Beznea1-1/+0
[ Upstream commit 3d074b750d2b4c91962f10ea1df1c289ce0d3ce8 ] VDD_OTHER is not connected to any on board consumer thus it is not needed to keep it enabled all the time. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-03 17:47:31 +0300