summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2010-05-11[ARM] pxa/vpac270: UDC and UHC supportMarek Vasut2-0/+79
NOTE: I wasn't able to get it running without reseting the HXOE (so it's there based on my tests with the hardware). I'll have to investigate it properly when I have more time. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add support for Voipac PXA270 PCMCIAMarek Vasut2-0/+28
PCMCIA support for Voipac PXA270 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add basic support for Voipac PXA270 SBCMarek4-0/+338
This patch adds basic support for the Voipac PXA270 SBC. The device consists of the following hardware: - PXA270 @ 520 MHz - 256MB RAM (sparsemem, 2*128MB regions) - 64MB NOR flash - 640x480 LCD - Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add basic support for the Aeronix Zipit Z2 handheldMarek Vasut4-0/+657
This patch adds support for the Zipit Z2. The parts missing from this patch are the battery support, SPI driver for the LCD and support for the Silicon Serial ID chip. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/cm-x300: update the memory fixup.Igor Grinberg1-7/+7
CM-X300 bootloader passes DRAM configuration information in ATAGS, however, the first memory bank is reported at actual physical address 0x8000000. Use the configuration information supplied by the bootloader and cope with the necessity to have PHYS_ADDR=0xa0000000. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/cm-x300: add regulator on vcc_coreIgor Grinberg1-0/+27
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/cm-x300: fix da903x IRQ line assignmentIgor Grinberg1-1/+1
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/cm-x300: da903x WLED is not connected on cm-x300Igor Grinberg1-4/+0
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/cm-x300.c: add battery charger supportIgor Grinberg1-1/+56
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove pxa_gpio_mode() and filesEric Miao3-407/+0
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to mach/KconfigEric Miao2-1/+13
Tosa is now able to use generic matrix keypad driver instead of the deprecated tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful. Move it to mach/Kconfig. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/corgi: cleanup GPIO configurations and low power mode settingsEric Miao2-59/+32
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/corgi: use generic GPIO API and remove pxa_gpio_mode()Eric Miao2-21/+25
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode()Eric Miao2-8/+24
REVISIT: change to GPIO18 is ugly, need to make sure whether that's really necessary - GPIO18_RDY as an VLIO input signal - we don't normally need to do such kind of trick during low power mode. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: allow MFP_LPM_INPUT to be explicitly specifiedEric Miao2-0/+2
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: allow keypad GPIOs to wakeup when configured as genericEric Miao1-9/+22
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add MFP_LPM_KEEP_OUTPUT flag to pin configEric Miao2-0/+13
Some pins are expected to keep their last level during suspend, and introduce MFP_LPM_KEEP_OUTPUT for this. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: use resource_size() in ssp.cJulia Lawall1-4/+4
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: avoid NULL dereferencing in error handling of ssp.cJulia Lawall1-16/+16
The assignments of res to the results of the two calls to platform_get_resource make it impossible to use res in the error handling code in the arguments to release_mem_region. The semantic match that finds the former problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E, E1; identifier f; statement S1,S3; iterator iter; @@ if ((E == NULL && ...) || ...) { ... when != false ((E == NULL && ...) || ...) when != true ((E != NULL && ...) || ...) when != iter(E,...) S1 when != E = E1 ( sizeof(E->f) | * E->f ) ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] mmp: enable ssp in aspeniteHaojian Zhuang1-0/+13
Configure both ssp and wm8753 in aspenite. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] mmp: support ssp in pxa168Haojian Zhuang6-10/+48
Support ssp devices in PXA168. PXA168 could reuse the code of PXA SSP. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: simplify ifdef in ssp.hHaojian Zhuang1-26/+15
Try to keep minimum ifdef in ssp.h. Some of the definitions are valid only to specific SoCs, and device drivers should be responsible to take care of these difference. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove incorrect select PXA_SSP in KconfigEric Miao1-13/+0
PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select' from Kconfig and make SOC_PXA_SSP to select. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: move ssp into common plat-pxaHaojian Zhuang7-8/+8
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove unnecessary #include of <mach/ssp.h>Eric Miao3-3/+0
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: merge regs-ssp.h into ssp.hEric Miao3-128/+122
No need to separate them as they should be together from the begining. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: correct SSCR0_SCR to support multiple SoCsEric Miao1-8/+1
The previous definitions of SSCR0_SCR and SSCR0_SerClkDiv() prevented them being used simultaneously when supporting multiple PXA SoCs, esp. in drivers/spi/pxa2xx_spi.c, make them correct. The change from SSCR0_SerClkDiv(2) to SSCR0_SCR(2), will make the result a little bit different in pxa2xx_spi_probe(), however, since that's only used as a default initialization value, it's acceptable. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove the now legacy SSP APIEric Miao3-326/+0
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.cEric Miao6-596/+0
The only use of corgi_ssp.c is corgi_ts.c, which is now deprecated and removed. Remove corgi_ssp.c and corgi_lcd.c and their relevant function declarations and data structures. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz>
2010-05-08Merge branch 'v4l_for_2.6.34' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
2010-05-07V4L/DVB: mx1-camera: compile fixUwe Kleine-König1-1/+7
This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06Merge branch 'fix' of ↵Russell King8-121/+79
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-05-06[ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.hJakob Viketoft1-0/+1
The use of mfp_cfg_t causes build errors without including <mach/mfp.h>. CC: stable@kernel.org CC: Daniel Mack <daniel@caiaq.de> Signed-off-by: Jakob Viketoft <jakob.viketoft@bitsim.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/spitz: fix On/off key name to fix warning during bootPavel Machek1-1/+1
On/Off contains slash in the name, which causes warning during boot. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: fix the incorrect cpu_is_pxa950()Haojian Zhuang1-1/+1
Fix the wrong variable used in cpu_is_pxa950(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: update cpuid pattern for pxa9xx in head.SHaojian Zhuang1-8/+2
Update CPUID pattern of PXA9xx in head.S and fix the duplicate entries for pxa935. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/viper: fix timeout usage for I2CWolfram Sang1-2/+3
The timeout value is in jiffies, so it should be using HZ, not a plain number. Assume with HZ=100 '100' means 1s here and adapt accordingly. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Shen <paul.shen@marvell.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/raumfeld: fix button nameDaniel Mack1-3/+2
"on/off button" was recently renamed to remove the slash character. Follow that change in the pin polarity detection as well. While at it, fix another cosmetic coding style flaw as well. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/imote2: Fix iMote2 defconfigStefan Schmidt1-105/+67
- Bring in a CMDLINE that actually works and prints to the right tty - Compile-in JFFS2 to boot into rootfs - Remove unneeded options for Bluetooth and radio - Disable CPU_FREQ as it makes the flash driver fail Thanks Jonathan for spotting what I messed up. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: add missing new line to regs-u2d.hIgor Grinberg1-1/+2
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-04ARM: 6093/1: Fix kernel memory printing for sparsememCatalin Marinas1-10/+4
The show_mem() and mem_init() function are assuming that the page map is contiguous and calculates the start and end page of a bank using (map + pfn). This fails with SPARSEMEM where pfn_to_page() must be used. Tested-by: Will Deacon <Will.Deacon@arm.com> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-03Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King1-0/+1
2010-05-01arch/arm/include/asm/elf.h: forward-declare the task-structAndrew Morton1-0/+2
iop32x_defconfig: In file included from include/linux/elf.h:7, from kernel/elfcore.c:1: arch/arm/include/asm/elf.h:101: warning: "struct task_struct" declared inside parameter list arch/arm/include/asm/elf.h:101: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01arch/arm/plat-pxa/dma.c: correct NULL testJulia Lawall1-1/+1
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6076/1: SA1100: add processor check to sa1110-cpufreq driverDmitry Artamonow1-0/+3
Just to make sure that this driver won't run on StrongArm SA1100 when both SA1100 and SA1110 cpufreq drivers are built in (usually in multimachine config). SA1100 driver already has similar check. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6075/1: SA1100: fix wrong CPU type for h3100 and h3600Dmitry Artamonow1-2/+2
They have StrongARM SA1110, not SA1100. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: Update mach-typesRussell King1-1/+56
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6066/1: Fix "BUG: scheduling while atomic: swapper/0/0x00000002Santosh Shilimkar1-0/+6
This patch fixes the preempt leak in the cpuidle path invoked from cpu-hotplug. The fix is suggested by Russell King and is based on x86 idea of calling init_idle() on the idle task when it's re-used which also resets the preempt count amongst other things dump: BUG: scheduling while atomic: swapper/0/0x00000002 Modules linked in: Backtrace: [<c0024f90>] (dump_backtrace+0x0/0x110) from [<c0173bc4>] (dump_stack+0x18/0x1c) r7:c02149e4 r6:c033df00 r5:c7836000 r4:00000000 [<c0173bac>] (dump_stack+0x0/0x1c) from [<c003b4f0>] (__schedule_bug+0x60/0x70) [<c003b490>] (__schedule_bug+0x0/0x70) from [<c0174214>] (schedule+0x98/0x7b8) r5:c7836000 r4:c7836000 [<c017417c>] (schedule+0x0/0x7b8) from [<c00228c4>] (cpu_idle+0xb4/0xd4) # [<c0022810>] (cpu_idle+0x0/0xd4) from [<c0171dd8>] (secondary_start_kernel+0xe0/0xf0) r5:c7836000 r4:c0205f40 [<c0171cf8>] (secondary_start_kernel+0x0/0xf0) from [<c002d57c>] (prm_rmw_mod_reg_bits+0x88/0xa4) r7:c02149e4 r6:00000001 r5:00000001 r4:c7836000 Backtrace aborted due to bad frame pointer <c7837fbc> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6068/1: Fix build break with KPROBES enabledSantosh Shilimkar1-2/+2
With CONFIG_KPROBES enabled two section are getting created which leads to below build break. LOG: AS arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:431: Error: symbol ret_from_exception is in a different section arch/arm/kernel/entry-armv.S:490: Error: symbol ret_from_exception is in a different section arch/arm/kernel/entry-armv.S:491: Error: symbol __und_usr_unknown is in a different section This was introduced by commit 4260415f6a3b92c5c986398d96c314df37a4ccbf Reported-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-30musb: fix power field to hold all possible valuesAjay Kumar Gupta1-1/+1
MUSB can supply upto 500mA such as, AM3517 and OMAP3EVM Rev >=E and thus the 'power' field has to hold values above 255. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-12 13:09:30 +0300