| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski
"This was a quiet release cycle for the GPIO tree and so this
pull-request is relatively small.
We have one new driver, some minor improvements to the GPIO core code
and across several drivers, some DT and documentation updates but in
general nothing stands out or is controversial. All changes have spent
time in next with no reported issues (or ones that were quickly
fixed).
GPIO core:
- remove more unused legacy interfaces (after converting the last
remaining users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name
fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple
GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to
gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos"
* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
gpio: nuvoton: Fix sgpio irq handle error
gpiolib: Discourage to use formatting strings in line names
gpio: brcmstb: add support for gpio-ranges
gpio: of: support gpio-ranges for multiple gpiochip devices
dt-bindings: gpio: brcmstb: add gpio-ranges
gpio: Add Intel Granite Rapids-D vGPIO driver
gpio: brcmstb: Use dynamic GPIO base numbers
gpiolib: acpi: Set label for IRQ only lines
gpiolib: acpi: Add fwnode name to the GPIO interrupt label
gpiolib: Get rid of never false gpio_is_valid() calls
gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
gpiolib: acpi: Extract __acpi_find_gpio() helper
gpio: sch: Utilise temporary variable for struct device
gpio: sch: Switch to memory mapped IO accessors
gpio: regmap: Use -ENOTSUPP consistently
gpio: pcie-idio-24: Use -ENOTSUPP consistently
Documentation: gpio: Replace leading TABs by spaces in code blocks
gpiolib: acpi: Check for errors first in acpi_find_gpio()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release.
There were a couple of cleanups in the core but nothing substantial,
the updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver
- Overhaul of the PXA2xx driver, mostly API updates
- A number of DT binding conversions
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0"
* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: dw: Bail out early on unsupported target mode
spi: Remove unneded check for orig_nents
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: dt-bindings: ti,qspi: convert to dtschema
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: dw: Drop default number of CS setting
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert to using BITS_TO_BYTES() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Combine perf and BPF for fast evalution of HW breakpoint
conditions
- Add LBR capture support outside of hardware events
- Trigger IO signals for watermark_wakeup
- Add RAPL support for Intel Arrow Lake and Lunar Lake
- Optimize frequency-throttling
- Miscellaneous cleanups & fixes
* tag 'perf-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf/bpf: Mark perf_event_set_bpf_handler() and perf_event_free_bpf_handler() as inline too
selftests/perf_events: Test FASYNC with watermark wakeups
perf/ring_buffer: Trigger IO signals for watermark_wakeup
perf: Move perf_event_fasync() to perf_event.h
perf/bpf: Change the !CONFIG_BPF_SYSCALL stubs to static inlines
selftest/bpf: Test a perf BPF program that suppresses side effects
perf/bpf: Allow a BPF program to suppress all sample side effects
perf/bpf: Remove unneeded uses_default_overflow_handler()
perf/bpf: Call BPF handler directly, not through overflow machinery
perf/bpf: Remove #ifdef CONFIG_BPF_SYSCALL from struct perf_event members
perf/bpf: Create bpf_overflow_handler() stub for !CONFIG_BPF_SYSCALL
perf/bpf: Reorder bpf_overflow_handler() ahead of __perf_event_overflow()
perf/x86/rapl: Add support for Intel Lunar Lake
perf/x86/rapl: Add support for Intel Arrow Lake
perf/core: Reduce PMU access to adjust sample freq
perf/core: Optimize perf_adjust_freq_unthr_context()
perf/x86/amd: Don't reject non-sampling events with configured LBR
perf/x86/amd: Support capturing LBR from software events
perf/x86/amd: Avoid taking branches before disabling LBR
perf/x86/amd: Ensure amd_pmu_core_disable_all() is always inlined
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"Most of the changes enable additional device driver modules and arm64
platforms. In addition, the usb onboard-device support and ext4
security labels are turned on"
* tag 'soc-defconfig-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: enable Airoha platform
arm64: defconfig: enable Khadas TS050 panel as module
arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in
arm64: defconfig: Enable Tegra Security Engine
arm64: defconfig: enable REGULATOR_QCOM_USB_VBUS
ARM: imx_v6_v7_defconfig: Update ONBOARD_USB_HUB to ONBOAD_USB_DEV
arm64: defconfig: enable ext4 security labels
arm64: defconfig: qcom: enable X1E80100 sound card
ARM: configs: sunxi: Enable DRM_DW_HDMI
arm64: defconfig: build snd_bcm2835 as module
arm64: defconfig: enable Rockchip Samsung USBDP PHY
ARM: shmobile: defconfig: Refresh for v6.9-rc1
arm64: defconfig: build ath12k as a module
arm64: defconfig: Enable sc7280 display and gpu clock controllers
ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
arm64: defconfig: support Mali CSF-based GPUs
arm64: defconfig: enable Rockchip RK3308 internal audio codec driver
arm64: defconfig: Enable R9A09G057 SoC
arm64: defconfig: Enable Renesas DA9062 PMIC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC code changes from Arnd Bergmann:
"The code changes are fairly minimal, there is a bit of conversion of
the old orion5x platform to modern gpio descriptors, the Kconfig entry
for the added EN7581 platform and a sysfs change for the i.MX PMU
device"
* tag 'soc-arm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: add Airoha EN7581 platform
ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs
ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs
ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs
ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs
ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs
ARM: imx: Assign parents for mmdc event_source devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM fix from Russell King:
- clear stale KASan stack poison when a CPU resumes
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9381/1: kasan: clear stale stack poison
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/arm
mvebu arm for 6.10 (part 1)
Decrease the usage of global GPIO numbers for LEDs for Orion5x boards
* tag 'mvebu-arm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs
ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs
ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs
ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs
ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs
Link: https://lore.kernel.org/r/87h6fcndxj.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This makes the LEDs on the TS409 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the Net2big Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the MV2120 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the D-Link DNS323 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the D2Net Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Since driver can parse num-cs device property, replace platform data
with this new approach. This pursues the following objectives:
- getting rid of the public header that barely used outside of
the SPI subsystem (more specifically the SPI PXA2xx drivers)
- making a trampoline for the driver to support non-default number
of the chip select pins in case the original code is going to be
converted to Device Tree model
It's not expected to have more users in board files except this one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240417110334.2671228-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.10
Generic Cleanups/Fixes:
- Remove custom ti,system-reboot-controller property
* tag 'ti-keystone-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
dt-bindings: arm: keystone: Remove ti,system-reboot-controller property
ARM: dts: ti: keystone: k2g: Remove ti,system-reboot-controller property
Link: https://lore.kernel.org/r/20240501124309.3cj5b3gjf3cpimut@outsell
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.10
- Enable support for the Renesas RZ/G2L display unit, DA9062 PMIC, and
RZ/V2H (R9A09G057) SoC in the ARM64 defconfig,
- Refresh shmobile_defconfig for v6.9-rc1.
* tag 'renesas-arm-defconfig-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v6.9-rc1
arm64: defconfig: Enable R9A09G057 SoC
arm64: defconfig: Enable Renesas DA9062 PMIC
arm64: defconfig: Enable Renesas RZ/G2L display unit DRM driver
Link: https://lore.kernel.org/r/cover.1712915530.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v6.10, round 1
Highlights:
---------
Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x
platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers
register to the framework to offer firewall services such as access
granting.
This series of patches is a new approach on the previous STM32 system
bus, history is available here:
https://lore.kernel.org/lkml/20230127164040.1047583/
The need for such framework arises from the fact that there are now
multiple hardware firewalls implemented across multiple products.
Drivers are shared between different products, using the same code.
When it comes to firewalls, the purpose mostly stays the same: Protect
hardware resources. But the implementation differs, and there are
multiple types of firewalls: peripheral, memory, ...
Some hardware firewall controllers such as the RIFSC implemented on
STM32MP2x platforms may require to take ownership of a resource before
being able to use it, hence the requirement for firewall services to
take/release the ownership of such resources.
On the other hand, hardware firewall configurations are becoming
more and more complex. These mecanisms prevent platform crashes
or other firewall-related incoveniences by denying access to some
resources.
The stm32 firewall framework offers an API that is defined in
firewall controllers drivers to best fit the specificity of each
firewall.
For every peripherals protected by either the ETZPC or the RIFSC, the
firewall framework checks the firewall controlelr registers to see if
the peripheral's access is granted to the Linux kernel. If not, the
peripheral is configured as secure, the node is marked populated,
so that the driver is not probed for that device.
The firewall framework relies on the access-controller device tree
binding. It is used by peripherals to reference a domain access
controller. In this case a firewall controller. The bus uses the ID
referenced by the access-controller property to know where to look
in the firewall to get the security configuration for the peripheral.
This allows a device tree description rather than a hardcoded peripheral
table in the bus driver.
The STM32 ETZPC device is responsible for filtering accesses based on
security level, or co-processor isolation for any resource connected
to it.
The RIFSC is responsible for filtering accesses based on Compartment
ID / security level / privilege level for any resource connected to
it.
* tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
firewall: introduce stm32_firewall framework
dt-bindings: bus: document ETZPC
dt-bindings: bus: document RIFSC
dt-bindings: treewide: add access-controllers description
dt-bindings: document generic access controllers
Link: https://lore.kernel.org/r/7dc64226-5429-4ab7-a8c8-6053b12e3cf5@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC changes for 6.10:
- Assign the pmu->dev parent to be the platform device for MMDC driver,
so that it doesn't appear directly under /sys/devices/.
* tag 'imx-soc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Assign parents for mmdc event_source devices
Link: https://lore.kernel.org/r/20240428121247.10370-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.10:
- Enable DW HDMI bridge driver for i.MX8M Plus SoC in arm64 defconfig
- Enable ONBOAD_USB_DEV driver in imx_v6_v7_defconfig to support USB2514
Hub found on imx6qdl-udoo board
* tag 'imx-defconfig-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Update ONBOARD_USB_HUB to ONBOAD_USB_DEV
ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
Link: https://lore.kernel.org/r/20240428121247.10370-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/defconfig
- add dependency for DRM_SUN8I_DW_HDMI in sunxi defconfig
* tag 'sunxi-config-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable DRM_DW_HDMI
Link: https://lore.kernel.org/r/20240426164354.GA101098@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.10
1. TI: add missing white-spaces for code readability.
2. Aspeed: add vendor prefix to compatibles, to properly describe
hardware, even though Linux drivers match by device name.
* tag 'dt-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: aspeed: Add vendor prefixes to lm25066 compat strings
ARM: dts: ti: omap: minor whitespace cleanup
Link: https://lore.kernel.org/r/20240428163316.28955-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.10:
- New board support: Seeed Studio NPi dev board, UNI-T UTi260B thermal
camera board.
- A couple of IRQ config correction for touchscreen and RC5T619 on
tolino-shine2hd device.
- Add snvs-poweroff support for i.MX7.
- A couple of dtb_check warning fixes on i.MX6SX and i.MX6QDL ESAI.
- Enable USB support for imx6qdl-udoo and imx27-phytec.
- A big series from Uwe Kleine-König to adopt #pwm-cells = <3> for i.MX
devices.
- Other small changes and clean-ups.
* tag 'imx-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (64 commits)
ARM: dts: imx6ul-pico: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-kontron-bl-common: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-kontron-bl-43: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-isiot: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-imx6ull-opos6uldev: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-geam: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-ccimx6ulsbcpro: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6ul-14x14-evk: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sx-softing-vining-2000: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sx-sdb: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sx-nitrogen6sx: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sll-evk: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6sl-evk: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-var-dt6customboard: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-prti6q: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-pistachio: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-novena: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6q-kp: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6qdl-skov-cpu: Use #pwm-cells = <3> for imx27-pwm device
ARM: dts: imx6qdl-savageboard: Use #pwm-cells = <3> for imx27-pwm device
...
Link: https://lore.kernel.org/r/20240428121247.10370-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.10
The QCA8074 PHY package found in IPQ4019 is properly described.
The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support
is added, upon support for Sony Xperia Z3 is added.
Also based on MSM8974, support for Samsung Galaxy S5 China is introduced.
The WiFi board type is added for these "klte" Samsung devices, to select
appropriate NVRAM firmware file.
Based on MSM8226, support for Motorola Moto G (2013) is added.
Nodes representing the PCIe bridges under existing controllers are added
for APQ8064, IPQ4019, IPQ8064, and SDX55.
A number of fixes throughout to improve compliance with DeviceTree
bindings.
* tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn)
ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type
ARM: dts: qcom: msm8974: Split out common part of samsung-klte
ARM: dts: qcom: sdx55: Add PCIe bridge node
ARM: dts: qcom: apq8064: Add PCIe bridge node
ARM: dts: qcom: ipq4019: Add PCIe bridge node
ARM: dts: qcom: ipq8064: Add PCIe bridge node
ARM: dts: qcom: msm8974-sony-shinano: Enable vibrator
ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
ARM: dts: qcom: Add support for Motorola Moto G (2013)
dt-bindings: arm: qcom: Add Motorola Moto G (2013)
ARM: dts: qcom: msm8974: Add empty chosen node
ARM: dts: qcom: msm8974: Add @0 to memory node name
ARM: dts: qcom: Add Sony Xperia Z3 smartphone
ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-state
ARM: dts: qcom: include cpu in idle-state node names
ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
...
Link: https://lore.kernel.org/r/20240427163625.1432458-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Changes for v6.10-rc1
Adds support for EMC frequency scaling on PAZ100 devices with RAM code 1
and cleans up deprecated device tree properties.
* tag 'tegra-for-6.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tegra20-ac97: Replace deprecated "gpio" suffix
ARM: tegra: paz00: Add emc-tables for ram-code 1
Link: https://lore.kernel.org/r/20240426180519.3972626-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We found below OOB crash:
[ 33.452494] ==================================================================
[ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0
[ 33.455515]
[ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1
[ 33.456880] Hardware name: Generic DT based system
[ 33.457555] unwind_backtrace from show_stack+0x18/0x1c
[ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c
[ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4
[ 33.459863] print_report from kasan_report+0x9c/0x148
[ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0
[ 33.461424] kasan_check_range from memset+0x20/0x3c
[ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c
[ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354
[ 33.465029] do_idle from cpu_startup_entry+0x20/0x24
[ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4
[ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18
[ 33.467397]
[ 33.467644] The buggy address belongs to stack of task swapper/0/0
[ 33.468493] and is located at offset 112 in frame:
[ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec
[ 33.469917]
[ 33.470165] This frame has 2 objects:
[ 33.470696] [32, 76) 'global_zone_diff'
[ 33.470729] [112, 276) 'global_node_diff'
[ 33.471294]
[ 33.472095] The buggy address belongs to the physical page:
[ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03
[ 33.473944] flags: 0x1000(reserved|zone=0)
[ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001
[ 33.475656] raw: 00000000
[ 33.476050] page dumped because: kasan: bad access detected
[ 33.476816]
[ 33.477061] Memory state around the buggy address:
[ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00
[ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1
[ 33.480415] ^
[ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3
[ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[ 33.482978] ==================================================================
We find the root cause of this OOB is that arm does not clear stale stack
poison in the case of cpuidle.
This patch refer to arch/arm64/kernel/sleep.S to resolve this issue.
From cited commit [1] that explain the problem
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.
Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
From cited commit [2]
Extend to check for CONFIG_KASAN_STACK
[1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison")
[2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")
Signed-off-by: Boy Wu <boy.wu@mediatek.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 5615f69bc209 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspend
- DT cleanups & fixes
- fixed A64 GPU frequency at 432 MHz
- added H616 NMI node
- new boards: PocketBook 614 Plus, Tanix TX1
* tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add NMI device node
arm64: dts: allwinner: Add Tanix TX1 support
dt-bindings: arm: sunxi: document Tanix TX1 name
ARM: dts: sun5i: Add PocketBook 614 Plus support
dt-bindings: arm: sunxi: Add PocketBook 614 Plus
arm64: dts: allwinner: h616: Fix I2C0 pins
arm64: dts: allwinner: a64: Run GPU at 432 MHz
arm: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Orange Pi: delete node by phandle
arm64: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
arm64: dts: allwinner: pinephone: add multicolor LED node
arm64: dts: allwinner: pinephone: Retain LEDs state in suspend
Link: https://lore.kernel.org/r/20240426164510.GA101219@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.10, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add and enable LTDC display (rocktech,rk043fn48h)
on stm32mp135f-dk.
- Add firewall bus based on ETZPC firewall controller.
- Add PWR regulator support: Can be only used if the platform is
set as "no-secure" (RCC_SECCFGR cleared) either use SCMI
regulator.
- STMP32MP15:
- Add firewall bus based on ETZPC firewall controller.
- Add heartbeat on stm32mp157c-ed1.
- STM32MP25:
- Add firewall bus based on RIFSC firewall controller.
- Add clock support (RCC) based on SCMI clock protocol for root clocks.
- Add all I2C instances and declare i2c2/i2c8 on stm32mp257f-ev1.
- Add all SPI instances. and declare spi3/spi8 on stm32mp257f-ev1.
* tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
arm64: dts: st: correct masks for GIC PPI interrupts on stm32mp25
arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1
arm64: dts: st: add spi3/spi8 pins for stm32mp25
arm64: dts: st: add all 8 spi nodes on stm32mp251
arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
arm64: dts: st: add all 8 i2c nodes on stm32mp251
arm64: dts: st: add rcc support for STM32MP25
ARM: dts: stm32: enable display support on stm32mp135f-dk board
ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
dt-bindings: display: simple: allow panel-common properties
ARM: dts: stm32: add PWR regulators support on stm32mp131
media: dt-bindings: add access-controllers to STM32MP25 video codecs
ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
...
Link: https://lore.kernel.org/r/2040767c-413e-4447-b354-c44999930e4c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.10
1. Few cleanups of deprecated properties and node names pointed out by
bindings newly converted to DT schema.
2. Fix S5PV210 NAND node size-cells, pointed out by DT schema.
3. Add FIFO depth to each SPI node so we can avoid matching this through
DTS alias. Difference SPI instances on given SoC have different FIFO
depths.
4. Fix Exynos4212 Galaxy Tab3 usable memory, because stock bootloader is
not telling us truth.
* tag 'samsung-dt-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos4212-tab3: limit usable memory range
ARM: dts: samsung: s5pv210: specify the SPI FIFO depth
ARM: dts: samsung: exynos5420: specify the SPI FIFO depth
ARM: dts: samsung: exynos5250: specify the SPI FIFO depth
ARM: dts: samsung: exynos4: specify the SPI FIFO depth
ARM: dts: samsung: exynos3250: specify the SPI FIFO depth
ARM: dts: samsung: s5pv210: correct onenand size-cells
ARM: dts: samsung: s5pv210: align onenand node name with bindings
ARM: dts: samsung: exynos5800-peach-pi: switch to undeprecated DP HPD GPIOs
ARM: dts: samsung: smdk4412: align keypad node names with dtschema
ARM: dts: samsung: smdk4412: fix keypad no-autorepeat
ARM: dts: samsung: exynos4412-origen: fix keypad no-autorepeat
ARM: dts: samsung: smdkv310: fix keypad no-autorepeat
Link: https://lore.kernel.org/r/20240425071856.9235-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.10
Update n900 charge limit, and make use of the clksel binding for dra7
for the clksel clocks and other dpll output related clocks.
* tag 'omap-for-v6.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Use clksel binding for CTRL_CORE_SMA_SW_0
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_USB
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_PER
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_ABE_PLL_SYS
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_CORE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_EVE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GMAC
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DRR
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GPU
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_IVA
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DSP
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_CORE
ARM: dts: n900: set charge current limit to 950mA
Link: https://lore.kernel.org/r/pull-1714020191-304166@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.
There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20240417203853.3212103-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.10
- Add HDMI capture support for the Function expansion board for the
Eagle development board,
- Add PMIC support for the RZ/G2UL SMARC EVK development board,
- Add thermal, more serial ((H)SCIF), and timer (CMT and TMU) support
for the R-Car V4M SoC,
- Add Timer Unit (TMU) support for the R-Mobile APE6, R-Car Gen2, and
RZ/G1 SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Fix Ethernet aliases
arm64: dts: renesas: r8a779h0: Add TMU nodes
arm64: dts: renesas: r8a779h0: Add CMT nodes
arm64: dts: renesas: gray-hawk-single: Enable nfsroot
ARM: dts: renesas: r9a06g032: Remove duplicate interrupt-parent
arm64: dts: renesas: gray-hawk-single: Add second debug serial port
arm64: dts: renesas: r8a779h0: Add SCIF nodes
arm64: dts: renesas: r8a779h0: Add remaining HSCIF nodes
ARM: dts: renesas: rcar-gen2: Add TMU nodes
ARM: dts: renesas: rzg1: Add TMU nodes
ARM: dts: renesas: r8a73a4: Add TMU nodes
ARM: dts: renesas: r7s72100: Add interrupt-names to SCIF nodes
arm64: dts: renesas: r8a779h0: Add thermal nodes
arm64: dts: renesas: rzg2ul-smarc: Enable PMIC and built-in RTC, GPIO and ONKEY
arm64: dts: renesas: eagle: Add capture overlay for Function expansion board
Link: https://lore.kernel.org/r/cover.1712915536.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dtb: pwm@20f8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dtb: pwm@20fc000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dtb: pwm@20f0000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dtb: pwm@22a8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm nodes as
the soc dtsi doesn't disable these devices. Drop these properties, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable this device. Drop this property, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable this device. Drop this property, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
