Age | Commit message (Collapse) | Author | Files | Lines |
|
Kernel now supports chained power-off handlers. Use
register_power_off_handler() that registers power-off handlers and
do_kernel_power_off() that invokes chained power-off handlers. Legacy
pm_power_off() will be removed once all drivers will be converted to
the new sys-off API.
Normally arch code should adopt only the do_kernel_power_off() at first,
but m68k is a special case because it uses pm_power_off() "inside out",
i.e. pm_power_off() invokes machine_power_off() [in fact it does nothing],
while it's machine_power_off() that should invoke the pm_power_off(), and
thus, we can't convert platforms to the new API separately. There are only
two platforms changed here, so it's not a big deal.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To avoid 'warning: no previous prototype for' errors, declare all the
parse_bootinfo and config function prototypes into asm/config.h and
include it in arch/m68k/kernel/setup_mm.c and arch/m68k/*/config.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20220121200738.2577697-2-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
This allows m68k mac systems to switch from the deprecated IDE subsystem
to libata.
This was tested on my Quadra 630. I haven't tested it on my PowerBook 150
because I don't have a RAM adapter board for it. It appears that the
hardware I tested doesn't need macide_clear_irq() or macide_test_irq().
If it did, the generic driver would not have worked. It's possible that
those routines are needed for the PowerBook 150 but we can cross that
bridge if and when we come to it.
BTW, macide_clear_irq() appears to suffer from a race condition. The write
to the interrupt flags register could have unintended side effects as it
may alter other flag bits. Fortunately, all of the other bits are unused
by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20
was observed to have no effect on bit 5, so it may be redundant anyway.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
|
|
Don't add platform resources that won't be used. This avoids a
recently-added warning from the driver core, that can show up on a
multi-platform kernel when !MACH_IS_MAC.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/base/platform.c:224 platform_get_irq_optional+0x8e/0xce
0 is an invalid IRQ number
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-multi #1
Stack from 004b3f04:
004b3f04 00462c2f 00462c2f 004b3f20 0002e128 004754db 004b6ad4 004b3f4c
0002e19c 004754f7 000000e0 00285ba0 00000009 00000000 004b3f44 ffffffff
004754db 004b3f64 004b3f74 00285ba0 004754f7 000000e0 00000009 004754db
004fdf0c 005269e2 004fdf0c 00000000 004b3f88 00285cae 004b6964 00000000
004fdf0c 004b3fac 0051cc68 004b6964 00000000 004b6964 00000200 00000000
0051cc3e 0023c18a 004b3fc0 0051cd8a 004fdf0c 00000002 0052b43c 004b3fc8
Call Trace: [<0002e128>] __warn+0xa6/0xd6
[<0002e19c>] warn_slowpath_fmt+0x44/0x76
[<00285ba0>] platform_get_irq_optional+0x8e/0xce
[<00285ba0>] platform_get_irq_optional+0x8e/0xce
[<00285cae>] platform_get_irq+0x12/0x4c
[<0051cc68>] pmz_init_port+0x2a/0xa6
[<0051cc3e>] pmz_init_port+0x0/0xa6
[<0023c18a>] strlen+0x0/0x22
[<0051cd8a>] pmz_probe+0x34/0x88
[<0051cde6>] pmz_console_init+0x8/0x28
[<00511776>] console_init+0x1e/0x28
[<0005a3bc>] printk+0x0/0x16
[<0050a8a6>] start_kernel+0x368/0x4ce
[<005094f8>] _sinittext+0x4f8/0xc48
random: get_random_bytes called from print_oops_end_marker+0x56/0x80 with crng_init=0
---[ end trace 392d8e82eed68d6c ]---
Commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid"),
which introduced the WARNING, suggests that testing for irq == 0 is
undesirable. Instead of that comparison, just test for resource existence.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/0c0fe1e4f11ccec202d4df09ea7d9d98155d101a.1606001297.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The idea behind iop_preinit() was to put the SCC IOP into bypass mode.
However, that remains unimplemented and implementing it would be
difficult. Let the comments and code reflect this. Even if iop_preinit()
worked as described in the comments, it gets called immediately before
iop_init() so it might as well part of iop_init().
Cc: Joshua Thompson <funaho@jurai.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/0a7b09f5e5f48e270b82041c19e8f20f54c69216.1605847196.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
This information is unused since the discontinuous memory support
has been introduced in 2007.
Fixes: 12d810c1b8c2 ("m68k: discontinuous memory support")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20201009095621.833192-1-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
This gets passed to a number of init functions, but is
ignored everywhere, so remove the function and change the
mach_sched_init callback to take no arguments.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Conversion of the Mac IDE driver to a platform driver
- Minor cleanups and fixes
* tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
ide/macide: Convert Mac IDE driver to platform driver
m68k: Replace HTTP links with HTTPS ones
m68k: mm: Remove superfluous memblock_alloc*() casts
m68k: mm: Use PAGE_ALIGNED() helper
m68k: Sort selects in main Kconfig
m68k: amiga: Clean up Amiga hardware configuration
m68k: Revive _TIF_* masks
m68k: Correct some typos in comments
m68k: Use get_kernel_nofault() in show_registers()
zorro: Fix address space collision message with RAM expansion boards
m68k: amiga: Fix Denise detection on OCS
|
|
Add platform devices for the Mac IDE controller variants. Convert the
macide module into a platform driver to support two of those variants.
For the third, use a generic "pata_platform" driver instead.
This enables automatic loading of the appropriate module and begins
the process of replacing the driver with libata alternatives.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Joshua Thompson <funaho@jurai.org>
References: commit 5ed0794cde593 ("m68k/atari: Convert Falcon IDE drivers to platform drivers")
References: commit 7ad19a99ad431 ("ide: officially deprecated the legacy IDE driver")
Link: https://lore.kernel.org/r/edd106dad1bbea32500601c6071f37a9f02a8004.1600901284.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache().
This avoids a boot crash which appeared in v5.4.
printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<00008a6a>] via_flush_cache+0x12/0x2c
SR: 2700 SP: 01c1fe3c a2: 01c24000
d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f
d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000
Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0
baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:
01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c
[<00010080>] fix_dnrm+0x2/0x18
[<0000792e>] cache_push+0x46/0x5a
[<00006b40>] arch_dma_prep_coherent+0x60/0x6e
[<00040000>] switched_to_dl+0x76/0xd0
[<004a545e>] dma_atomic_pool_init+0x4e/0x188
[<00040000>] switched_to_dl+0x76/0xd0
[<00033b92>] parse_args+0x0/0x370
[<004a5410>] dma_atomic_pool_init+0x0/0x188
[<000021e2>] do_one_initcall+0x34/0x1be
[<00033b92>] parse_args+0x0/0x370
[<0038507a>] strcpy+0x0/0x1e
[<000021ae>] do_one_initcall+0x0/0x1be
[<00020002>] do_proc_dointvec_conv+0x54/0x74
[<0049f938>] kernel_init_freeable+0x126/0x190
[<0049f94c>] kernel_init_freeable+0x13a/0x190
[<004a5410>] dma_atomic_pool_init+0x0/0x188
[<00041798>] complete+0x0/0x3c
[<000b9b0c>] kfree+0x0/0x20a
[<0038df98>] schedule+0x0/0xd0
[<0038d604>] kernel_init+0x0/0xda
[<0038d610>] kernel_init+0xc/0xda
[<0038d604>] kernel_init+0x0/0xda
[<00002d38>] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Thanks to Stan Johnson for capturing the console log and running git
bisect.
Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make
dma_atomic_pool_init self-contained") is the first "bad" commit. I don't
know why. Perhaps mach_l2_flush first became reachable with that commit.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Rename floppy_type macros to make them more consistent with the scsi_type
macros, which are named after classes of models with similar memory maps.
The MAC_FLOPPY_OLD symbol is introduced to change the relevant base
address from 0x50F00000 to 0x50000000 (consistent with MAC_SCSI_OLD).
The documentation for LC-class machines has the IO devices at offsets
from $50F00000. Use these addresses for MAC_FLOPPY_LC (consistent with
MAC_SCSI_LC) because they may not be aliased elsewhere in the memory map.
Add comments with controller type information from 'Designing Cards and
Drivers for the Macintosh Family', relevant Developer Notes and
http://mess.redump.net/mess/driver_info/mac_technical_notes
Adopt phys_addr_t to avoid type casts.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Add support for Apple's custom "SCSI DMA" chip. This patch doesn't make use
of its DMA capability. Just the PDMA capability is sufficient to improve
sequential read throughput by a factor of 5.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The functions that implement arch_gettimeoffset are re-used by
new clocksource drivers in subsequent patches.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A fix for a bug in our page table fragment allocator, where a page
table page could be freed and reallocated for something else while
still in use, leading to memory corruption etc. The fix reuses
pt_mm in struct page (x86 only) for a powerpc only refcount.
- Fixes to our pkey support. Several are user-visible changes, but
bring us in to line with x86 behaviour and/or fix outright bugs.
Thanks to Florian Weimer for reporting many of these.
- A series to improve the hvc driver & related OPAL console code,
which have been seen to cause hardlockups at times. The hvc driver
changes in particular have been in linux-next for ~month.
- Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
- Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
use anywhere other than as a paper weight.
- An optimised memcmp implementation using Power7-or-later VMX
instructions
- Support for barrier_nospec on some NXP CPUs.
- Support for flushing the count cache on context switch on some IBM
CPUs (controlled by firmware), as a Spectre v2 mitigation.
- A series to enhance the information we print on unhandled signals
to bring it into line with other arches, including showing the
offending VMA and dumping the instructions around the fault.
Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
Rao, zhong jiang"
* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
powerpc/mm/book3s/radix: Add mapping statistics
powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
powerpc/mm/hash: Remove unnecessary do { } while(0) loop
powerpc/64s: move machine check SLB flushing to mm/slb.c
powerpc/powernv/idle: Fix build error
powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
powerpc/mm: remove warning about ‘type’ being set
powerpc/32: Include setup.h header file to fix warnings
powerpc: Move `path` variable inside DEBUG_PROM
powerpc/powermac: Make some functions static
powerpc/powermac: Remove variable x that's never read
cxl: remove a dead branch
powerpc/powermac: Add missing include of header pmac.h
powerpc/kexec: Use common error handling code in setup_new_fdt()
powerpc/xmon: Add address lookup for percpu symbols
powerpc/mm: remove huge_pte_offset_and_shift() prototype
powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
powerpc/fadump: handle crash memory ranges array index overflow
...
|
|
Now that the PowerMac via-pmu driver supports m68k PowerBooks,
switch over to that driver and remove the via-pmu68k driver.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss()
because it was unused in 2012. However, this was itself the only user of the
mach_set_clock_mmss() callback and the many implementations of that callback,
which are equally unused.
This removes all of those as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
I can confirm that mac_scsi PDMA now works on these machines.
This increases sequential read throughput by a factor of 4.5.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The resource size is 0x2000 == end - start + 1.
Therefore end == start + 0x2000 - 1.
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: stable@vger.kernel.org # v4.14+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Pull networking updates from David Miller:
1) Support offloading wireless authentication to userspace via
NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.
2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
Setup and cleanup of namespaces now all run asynchronously and thus
performance is significantly increased.
3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
Streiff.
4) Support zerocopy on RDS sockets, from Sowmini Varadhan.
5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
Borkmann.
6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
Chevallier.
7) Support grafting of child qdiscs in mlxsw driver, from Nogah
Frankel.
8) Add packet forwarding tests to selftests, from Ido Schimmel.
9) Deal with sub-optimal GSO packets better in BBR congestion control,
from Eric Dumazet.
10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.
11) Add path MTU tests to selftests, from Stefano Brivio.
12) Various bits of IPSEC offloading support for mlx5, from Aviad
Yehezkel, Yossi Kuperman, and Saeed Mahameed.
13) Support RSS spreading on ntuple filters in SFC driver, from Edward
Cree.
14) Lots of sockmap work from John Fastabend. Applications can use eBPF
to filter sendmsg and sendpage operations.
15) In-kernel receive TLS support, from Dave Watson.
16) Add XDP support to ixgbevf, this is significant because it should
allow optimized XDP usage in various cloud environments. From Tony
Nguyen.
17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
Venkataramanan et al.
18) IP fragmentation match offload support in nfp driver, from Pieter
Jansen van Vuuren.
19) Support XDP redirect in i40e driver, from Björn Töpel.
20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
tracepoints in their raw form, from Alexei Starovoitov.
21) Lots of striding RQ improvements to mlx5 driver with many
performance improvements, from Tariq Toukan.
22) Use rhashtable for inet frag reassembly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
net: mvneta: improve suspend/resume
net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
net: bgmac: Correctly annotate register space
route: check sysctl_fib_multipath_use_neigh earlier than hash
fix typo in command value in drivers/net/phy/mdio-bitbang.
sky2: Increase D3 delay to sky2 stops working after suspend
net/mlx5e: Set EQE based as default TX interrupt moderation mode
ibmvnic: Disable irqs before exiting reset from closed state
net: sched: do not emit messages while holding spinlock
vlan: also check phy_driver ts_info for vlan's real device
Bluetooth: Mark expected switch fall-throughs
Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
Bluetooth: btrsi: remove unused including <linux/version.h>
Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
sh_eth: kill useless check in __sh_eth_get_regs()
sh_eth: add sh_eth_cpu_data::no_xdfar flag
ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
...
|
|
The PMU watchdog will power down the system if the kernel is slow
to start up, e.g. due to unpacking a large initrd. The powerpc
version of this driver (via-pmu.c) has a solution for the same
problem. It uses this call sequence:
setup_arch
find_via_pmu
init_pmu
...
arch_initcall
via_pmu_start
Bring via-pmu68k.c into line with via-pmu.c to fix this issue.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Stan's tests showed that PDMA improves sequential read performance by
a factor of 5 on a PowerBook 190. Last time I tried this on a
PowerBook 520 it didn't work, so let's not enable it there until
it can be tested with the present mac_scsi driver.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Apparently these Dayna cards don't have a pseudoslot declaration ROM
which means they can't be probed like NuBus cards.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an expansion slot attribute to allow drivers to properly handle
cards like Comm Slot cards and PDS cards without declaration ROMs.
This clarifies the logic for the Centris 610 model which has no
Comm Slot but has an optional on-board SONIC device.
Cc: "David S. Miller" <davem@davemloft.net>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
macintosh_config->via_type is meaningless on Mac IIfx (i.e. the only
model with OSS chip), so skip the via_type switch statement.
Call oss_init() before via_init() because it is more important and
because that is the right place to initialize the oss_present flag.
On this model, bringing forward oss_init() and delaying via_init()
is no problem because those functions are independent.
The only requirement here is that oss_register_interrupts() happens
after via_init(). That is, mac_init_IRQ() happens after config_mac().
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
These changes save 1014 bytes according to scripts/bloat-o-meter.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Convert from printk() to pr_*().
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
[FT: Adjusted log message severity levels and retained bootinfo log]
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Change the device probe test in the via-cuda.c driver so it will load on
Egret-based machines too. Remove the now redundant via-maciisi.c driver.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The asm/rtc.h header is only used for the old gen_rtc driver
that has been replaced by rtc-generic. According to Geert
Uytterhoeven, nobody has used the old driver on m68k for
a long time, so we can now just remove the header file
and disallow the driver in Kconfig.
All files that used to include asm/rtc.h are now changed so
they include the headers that were used implicitly through
asm/rtc.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Designing Cards and Drivers for the Macintosh Family, 3rd ed. on page 310
says that the I/O address space for the Mac LC is $50F0 0000 - $50FF FFFF.
The developer notes for the Classic II, LC III and IIvx/IIvi give the same
I/O address space.
That means I've assigned the wrong platform resources to those Mac models.
Fix the scsi_type initialization for the affected models, to restore the
SCSI base address to its value prior to Linux 3.18.
Also rename MAC_SCSI_CCL as MAC_SCSI_LC for the sake of correct chronology.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Convert mac_scsi to platform device and eliminate scsi_register().
Platform resources for chip registers now follow the documentation. This
should fix issues with the Mac IIci (and possibly other models too).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Make the boot console available to more m68k platforms by leveraging
the head.S debug console.
The boot console is enabled by the "earlyprintk" command line argument
which is how most other architectures do this.
This is a change of behaviour for the Mac but does not negatively impact
the common use-case which is not debugging.
This is also a change of behaviour for other platforms because it means
the serial port stays quiet when CONFIG_EARLY_PRINTK is not enabled. This
is also an improvement for the common use-case.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stephen N Chivers <schivers@csc.com.au>
[Geert: CONSOLE_DEBUG should depend on CONFIG_FONT_SUPPORT]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Export the bootinfo definitions that are used by bootstrap loaders, and
split them up in generic and platform-specific parts.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Drop remainings and API for backwards compatibility with bootinfo interface
version 1.0. This was used when booting a 2.1.x or newer kernel on Amiga,
Atari, or Mac using a bootstrap for kernel 2.0.x.
Everybody upgraded his bootstrap a long time ago, so this can go.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
remove m68k's mach_gettimeoffset function pointer, and instead directly
set the arch_gettimeoffset function pointer. This requires multiplying
all function results by 1000, since the removed m68k_gettimeoffset() did
this. Also, s/unsigned long/u32/ just to make the function prototypes
exactly match that of arch_gettimeoffset.
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Sam Creasey <sammy@sammy.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
On multi-platform kernels, the Mac platform devices should be registered
when running on Mac only. Else it may crash later.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
|
|
Disintegrate asm/system.h for M68K.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
cc: linux-m68k@lists.linux-m68k.org
|
|
Code style convention has macro names in uppercase. Change MAC_VIA_IIci to MAC_VIA_IICI.
Also remove an obsolete comment.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The PowerBook 150 is a actually a Duo underneath. Fix the adb_type.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The IOP driver calls into the OSS driver to enable its IRQ. This undesirable coupling between drivers only exists because the OSS driver doesn't correctly handle all of its machspec IRQs.
Fix OSS handling of enable/disable for VIA1 IRQs (8 thru 15) which includes MAC_IRQ_ADB.
Back when I implemented pmac_zilog support I redefined IRQ_MAC_SCC incorrectly. Change this to a machspec IRQ so that it works on OSS.
Clean up the unused OSS audio IRQ and OSS_IRQLEV_* cruft that only confuses things.
Fix the OSS description in macints.c and remove an obsolete comment.
Don't enable the VIA1 irq before registering the handler.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Enable via_alt_mapping on the Performa 588 and tidy up related documentation.
I'm betting that remapped IRQs work just fine on the Performa 580 series since it works on the LC 630 and the logic board part numbers are reputedly the same.
And the consensus seems to be that the Mac TV is essentially a Performa 550, not dissimilar to the Performa 520, so set the via_type accordingly.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Revive the old mac_serial_print() routine as mac_early_print(). mac_serial_print() did not function because it did not use the right offsets for its stack arguments. Fix this and make compilation conditional on CONFIG_EARLY_PRINTK instead of the obscure MAC_SERIAL_DEBUG macro.
Give mac_early_print() a new string length parameter to fit the early console API.
Send output to the framebuffer as well as serial ports.
Change the line rate to 38400 baud to match the default for the real (pmac_zilog) serial console.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The valkyriefb driver needs the CUDA to work in order to set the video
mode at boot. So initialise the device earlier, and bring the m68k code
closer to the powermac code.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Move platform device code from the drivers to the platform init function.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|