summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm/tlb.h
AgeCommit message (Collapse)AuthorFilesLines
2019-04-03arch/tlb: Clean up simple architecturesPeter Zijlstra1-8/+0
For the architectures that do not implement their own tlb_flush() but do already use the generic mmu_gather, there are two options: 1) the platform has an efficient flush_tlb_range() and asm-generic/tlb.h doesn't need any overrides at all. 2) the platform lacks an efficient flush_tlb_range() and we select MMU_GATHER_NO_RANGE to minimize full invalidates. Convert all 'simple' architectures to one of these two forms. alpha: has no range invalidate -> 2 arc: already used flush_tlb_range() -> 1 c6x: has no range invalidate -> 2 hexagon: has an efficient flush_tlb_range() -> 1 (flush_tlb_mm() is in fact a full range invalidate, so no need to shoot down everything) m68k: has inefficient flush_tlb_range() -> 2 microblaze: has no flush_tlb_range() -> 2 mips: has efficient flush_tlb_range() -> 1 (even though it currently seems to use flush_tlb_mm()) nds32: already uses flush_tlb_range() -> 1 nios2: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) openrisc: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) parisc: already uses flush_tlb_range() -> 1 sparc32: already uses flush_tlb_range() -> 1 unicore32: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) xtensa: has efficient flush_tlb_range() -> 1 Note this also fixes a bug in the existing code for a number platforms. Those platforms that did: tlb_end_vma() -> if (!full_mm) flush_tlb_*() tlb_flush -> if (full_mm) flush_tlb_mm() missed the case of shift_arg_pages(), which doesn't have @fullmm set, nor calls into tlb_*vma(), but still frees page-tables and thus needs an invalidate. The new code handles this by detecting a non-empty range, and either issuing the matching range invalidate or a full invalidate, depending on the capabilities. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Helge Deller <deller@gmx.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <lftan@altera.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03asm-generic/tlb, arch: Provide generic VIPT cache flushPeter Zijlstra1-9/+0
The one obvious thing SH and ARM want is a sensible default for tlb_start_vma(). (also: https://lkml.org/lkml/2004/1/15/6 ) Avoid all VIPT architectures providing their own tlb_start_vma() implementation and rely on architectures to provide a no-op flush_cache_range() when it is not relevant. This patch makes tlb_start_vma() default to flush_cache_range(), which should be right and sufficient. The only exceptions that I found where (oddly): - m68k-mmu - sparc64 - unicore Those architectures appear to have flush_cache_range(), but their current tlb_start_vma() does not call it. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Miller <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-28MIPS: asm/tlb.h: Add UNIQUE_GUEST_ENTRYHI() macroJames Hogan1-2/+4
Add a distinct UNIQUE_GUEST_ENTRYHI() macro for invalidation of guest TLB entries by KVM, using addresses in KSeg1 rather than KSeg0. This avoids conflicts with guest invalidation routines when there is no EHINV bit to mark the whole entry as invalid, avoiding guest machine check exceptions on Cavium Octeon III. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2016-11-24MIPS: Mask out limit field when calculating wired entry countPaul Burton1-0/+13
Since MIPSr6 the Wired register is split into 2 fields, with the upper 16 bits of the register indicating a limit on the value that the wired entry count in the bottom 16 bits of the register can take. This means that simply reading the wired register doesn't get us a valid TLB entry index any longer, and we instead need to retrieve only the lower 16 bits of the register. Introduce a new num_wired_entries() function which does this on MIPSr6 or higher and simply returns the value of the wired register on older architecture revisions, and make use of it when reading the number of wired entries. Since commit e710d6668309 ("MIPS: tlb-r4k: If there are wired entries, don't use TLBINVF") we have been using a non-zero number of wired entries to determine whether we should avoid use of the tlbinvf instruction (which would invalidate wired entries) and instead loop over TLB entries in local_flush_tlb_all(). This loop begins with the number of wired entries, or before this patch some large bogus TLB index on MIPSr6 systems. Thus since the aforementioned commit some MIPSr6 systems with FTLBs have been prone to leaving stale address translations in the FTLB & crashing in various weird & wonderful ways when we later observe the wrong memory. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14557/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-22MIPS: tlb: Set the EHINV bit for TLBINVF cores when invalidating the TLBLeonid Yegoshin1-1/+3
For MIPS32R3 supported cores, the EHINV bit needs to be set when invalidating the TLB. This is necessary because the legacy software method of representing an invalid TLB entry using an unmapped address value is not guaranteed to work. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6132/
2014-01-22MIPS: mm: Move UNIQUE_ENTRYHI macro to a header fileMarkos Chandras1-0/+2
The UNIQUE_ENTRYHI definition was duplicated whenever there was the need to flush the TLB entries. We move this common definition to a header file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6129/
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle1-1/+1
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle1-0/+23
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>