summaryrefslogtreecommitdiff
path: root/arch/mips/lib
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this file is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.443595178@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-04MIPS: MemoryMapID (MMID) SupportPaul Burton1-5/+17
Introduce support for using MemoryMapIDs (MMIDs) as an alternative to Address Space IDs (ASIDs). The major difference between the two is that MMIDs are global - ie. an MMID uniquely identifies an address space across all coherent CPUs. In contrast ASIDs are non-global per-CPU IDs, wherein each address space is allocated a separate ASID for each CPU upon which it is used. This global namespace allows a new GINVT instruction be used to globally invalidate TLB entries associated with a particular MMID across all coherent CPUs in the system, removing the need for IPIs to invalidate entries with separate ASIDs on each CPU. The allocation scheme used here is largely borrowed from arm64 (see arch/arm64/mm/context.c). In essence we maintain a bitmap to track available MMIDs, and MMIDs in active use at the time of a rollover to a new MMID version are preserved in the new version. The allocation scheme requires efficient 64 bit atomics in order to perform reasonably, so this support depends upon CONFIG_GENERIC_ATOMIC64=n (ie. currently it will only be included in MIPS64 kernels). The first, and currently only, available CPU with support for MMIDs is the MIPS I6500. This CPU supports 16 bit MMIDs, and so for now we cap our MMIDs to 16 bits wide in order to prevent the bitmap growing to absurd sizes if any future CPU does implement 32 bit MMIDs as the architecture manuals suggest is recommended. When MMIDs are in use we also make use of GINVT instruction which is available due to the global nature of MMIDs. By executing a sequence of GINVT & SYNC 0x14 instructions we can avoid the overhead of an IPI to each remote CPU in many cases. One complication is that GINVT will invalidate wired entries (in all cases apart from type 0, which targets the entire TLB). In order to avoid GINVT invalidating any wired TLB entries we set up, we make sure to create those entries using a reserved MMID (0) that we never associate with any address space. Also of note is that KVM will require further work in order to support MMIDs & GINVT, since KVM is involved in allocating IDs for guests & in configuring the MMU. That work is not part of this patch, so for now when MMIDs are in use KVM is disabled. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2018-10-16MIPS: lib: Use kernel_pref & user_pref in memcpy()Paul Burton1-4/+8
memcpy() is the only user of the PREF() & PREFE() macros from asm/asm.h. Switch to using the kernel_pref() & user_pref() macros from asm/asm-eva.h which fit more consistently with other abstractions of EVA vs non-EVA instructions. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20907/ Cc: linux-mips@linux-mips.org
2018-10-09MIPS: memset: Limit excessive `noreorder' assembly mode useMaciej W. Rozycki1-24/+24
Rewrite to use the `reorder' assembly mode and remove manually scheduled delay slots except where GAS cannot schedule a delay-slot instruction due to a data dependency or a section switch (as is the case with the EX macro). No change in machine code produced. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> [paul.burton@mips.com: Fix conflict with commit 932afdeec18b ("MIPS: Add Kconfig variable for CPUs with unaligned load/store instructions")] Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20834/ Cc: Ralf Baechle <ralf@linux-mips.org>
2018-10-09MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regressionMaciej W. Rozycki1-1/+3
Fix a commit 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for small_memset") regression and remove assembly warnings: arch/mips/lib/memset.S: Assembler messages: arch/mips/lib/memset.S:243: Warning: Macro instruction expanded into multiple instructions in a branch delay slot triggering with the CPU_DADDI_WORKAROUNDS option set and this code: PTR_SUBU a2, t1, a0 jr ra PTR_ADDIU a2, 1 This is because with that option in place the DADDIU instruction, which the PTR_ADDIU CPP macro expands to, becomes a GAS macro, which in turn expands to an LI/DADDU (or actually ADDIU/DADDU) sequence: 13c: 01a4302f dsubu a2,t1,a0 140: 03e00008 jr ra 144: 24010001 li at,1 148: 00c1302d daddu a2,a2,at ... Correct this by switching off the `noreorder' assembly mode and letting GAS schedule this jump's delay slot, as there is nothing special about it that would require manual scheduling. With this change in place correct code is produced: 13c: 01a4302f dsubu a2,t1,a0 140: 24010001 li at,1 144: 03e00008 jr ra 148: 00c1302d daddu a2,a2,at ... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for small_memset") Patchwork: https://patchwork.linux-mips.org/patch/20833/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org # 4.17+
2018-09-26MIPS: Add Kconfig variable for CPUs with unaligned load/store instructionsYasha Cherikovsky2-11/+11
MIPSR6 CPUs do not support unaligned load/store instructions (LWL, LWR, SWL, SWR and LDL, LDR, SDL, SDR for 64bit). Currently the MIPS tree has some special cases to avoid these instructions, and the code is testing for !CONFIG_CPU_MIPSR6. This patch declares a new Kconfig variable: CONFIG_CPU_HAS_LOAD_STORE_LR. This variable indicates that the CPU supports these instructions. Then, the patch does the following: - Carefully selects this option on all CPUs except MIPSR6. - Switches all the special cases to test for the new variable, and inverts the logic: '#ifndef CONFIG_CPU_MIPSR6' turns into '#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR' and vice-versa. Also, when this variable is NOT selected (e.g. MIPSR6), CONFIG_GENERIC_CSUM will default to 'y', to compile generic C checksum code (instead of special assembly code that uses the unsupported instructions). This commit should not affect any existing CPU, and is required for future Lexra CPU support, that misses these instructions too. Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20808/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-08-30MIPS: Use GENERIC_IOMAPPaul Burton3-235/+1
MIPS has a copy of lib/iomap.c with minor alterations, none of which are necessary given appropriate definitions of PIO_OFFSET, PIO_MASK & PIO_RESERVED. Provide such definitions, select GENERIC_IOMAP & remove arch/mips/lib/iomap.c to cut back on the needless duplication. The one change this does make is to our mmio_{in,out}s[bwl] functions, which began to deviate from their generic counterparts with commit 0845bb721ebb ("MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO"). I suspect that this commit was incorrect, and that the SEAD-3 platform should have instead selected CONFIG_SWAP_IO_SPACE. Since the SEAD-3 platform code is now gone & the board is instead supported by the generic platform (CONFIG_MIPS_GENERIC) which selects CONFIG_SWAP_IO_SPACE anyway, this shouldn't be a problem any more. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20342/ Cc: linux-mips@linux-mips.org
2018-08-21MIPS: lib: Provide MIPS64r6 __multi3() for GCC < 7Paul Burton1-3/+3
Some versions of GCC suboptimally generate calls to the __multi3() intrinsic for MIPS64r6 builds, resulting in link failures due to the missing function: LD vmlinux.o MODPOST vmlinux.o kernel/bpf/verifier.o: In function `kmalloc_array': include/linux/slab.h:631: undefined reference to `__multi3' fs/select.o: In function `kmalloc_array': include/linux/slab.h:631: undefined reference to `__multi3' ... We already have a workaround for this in which we provide the instrinsic, but we do so selectively for GCC 7 only. Unfortunately the issue occurs with older GCC versions too - it has been observed with both GCC 5.4.0 & GCC 6.4.0. MIPSr6 support was introduced in GCC 5, so all major GCC versions prior to GCC 8 are affected and we extend our workaround accordingly to all MIPS64r6 builds using GCC versions older than GCC 8. Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Fixes: ebabcf17bcd7 ("MIPS: Implement __multi3 for GCC7 MIPS64r6 builds") Patchwork: https://patchwork.linux-mips.org/patch/20297/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.15+
2018-07-25MIPS: memset.S: Add comments to fault fixup handlersMatt Redfearn1-0/+18
It is not immediately obvious what the expected inputs to these fault handlers is and how they calculate the number of unset bytes. Having stared deeply at this in order to fix some corner cases, add some comments to assist those who follow. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19339/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org>
2018-07-25MIPS: memset.S: Fix byte_fixup for MIPSr6Matt Redfearn1-1/+2
The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the MIPSr6 version of setting of initial unaligned bytes, the value loaded into a2 on return is meaningless. During the MIPSr6 version of the initial unaligned bytes block, register a2 contains the number of bytes to be set beyond the initial unaligned bytes. The t0 register is initally set to the number of unaligned bytes - STORSIZE, effectively a negative version of the number of unaligned bytes. This is then incremented before each byte is saved. The label .Lbyte_fixup\@ is jumped to on page fault. Currently the value in a2 is incorrectly replaced by 0 - t0 + 1, effectively the number of unaligned bytes remaining. This leads to the failures being reported by the following test code: static int __init test_clear_user(void) { int j, k; pr_info("\n\n\nTesting clear_user\n"); for (j = 0; j < 512; j++) { if ((k = clear_user(NULL+3, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } return 0; } late_initcall(test_clear_user); Which reports: [ 3.965439] Testing clear_user [ 3.973169] clear_user (NULL 8) returned 6 [ 3.976782] clear_user (NULL 9) returned 6 [ 3.980390] clear_user (NULL 10) returned 6 [ 3.984052] clear_user (NULL 11) returned 6 [ 3.987524] clear_user (NULL 12) returned 6 Fix this by subtracting t0 from a2 (rather than $0), effectivey giving: unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1 a2 = a2 - t0 + 1 This fixes the value returned from __clear user when the number of bytes to set is > LONGSIZE and the address is invalid and unaligned. Unfortunately, this breaks the fixup handling for unaligned bytes after the final long, where register a2 still contains the number of bytes remaining to be set and the t0 register is to 0 - the number of unaligned bytes remaining. Because t0 is now is now subtracted from a2 rather than 0, the number of bytes unset is reported incorrectly: static int __init test_clear_user(void) { char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { if ((k = clear_user(test + PAGE_SIZE - 254, j)) != j - 254) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 254, j, k); } } return 0; } late_initcall(test_clear_user); [ 3.976775] clear_user (c00000000000df02 256) returned 4 [ 3.981957] clear_user (c00000000000df02 257) returned 6 [ 3.986425] clear_user (c00000000000df02 258) returned 8 [ 3.990850] clear_user (c00000000000df02 259) returned 10 [ 3.995332] clear_user (c00000000000df02 260) returned 12 [ 3.999815] clear_user (c00000000000df02 261) returned 14 Fix this by ensuring that a2 is set to 0 during the set of final unaligned bytes. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 8c56208aff77 ("MIPS: lib: memset: Add MIPS R6 support") Patchwork: https://patchwork.linux-mips.org/patch/19338/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.0+
2018-05-21MIPS: memset.S: Reinstate delay slot indentationMatt Redfearn1-14/+14
Assembly language within the MIPS kernel conventionally indents instructions which are in a branch delay slot to make them easier to see. Commit 8483b14aaa81 ("MIPS: lib: memset: Whitespace fixes") rather inexplicably removed all of these indentations from memset.S. Reinstate the convention for all instructions in a branch delay slot. This effectively reverts the above commit, plus other locations introduced with MIPSR6 support. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19111/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-23MIPS: Use generic GCC library routines from lib/Antony Pavlov6-144/+1
The commit b35cd9884fa5 ("lib: Add shared copies of some GCC library routines") makes it possible to share generic GCC library routines by several architectures. This commit removes several generic GCC library routines from arch/mips/lib/ in favour of similar routines from lib/. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> [Matt Redfearn] Use GENERIC_LIB_* named Kconfig entries Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19051/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-18MIPS: memset.S: Fix clobber of v1 in last_fixupMatt Redfearn1-1/+1
The label .Llast_fixup\@ is jumped to on page fault within the final byte set loop of memset (on < MIPSR6 architectures). For some reason, in this fault handler, the v1 register is randomly set to a2 & STORMASK. This clobbers v1 for the calling function. This can be observed with the following test code: static int __init __attribute__((optimize("O0"))) test_clear_user(void) { register int t asm("v1"); char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { t = 0xa5a5a5a5; if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k); } if (t != 0xa5a5a5a5) { pr_err("v1 was clobbered to 0x%x!\n", t); } } return 0; } late_initcall(test_clear_user); Which demonstrates that v1 is indeed clobbered (MIPS64): Testing clear_user v1 was clobbered to 0x1! v1 was clobbered to 0x2! v1 was clobbered to 0x3! v1 was clobbered to 0x4! v1 was clobbered to 0x5! v1 was clobbered to 0x6! v1 was clobbered to 0x7! Since the number of bytes that could not be set is already contained in a2, the andi placing a value in v1 is not necessary and actively harmful in clobbering v1. Reported-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19109/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-17MIPS: memset.S: Fix return of __clear_user from Lpartial_fixupMatt Redfearn1-1/+1
The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the memset_partial block, the value loaded into a2 on return is meaningless. The label .Lpartial_fixup\@ is jumped to on page fault. In order to work out how many bytes failed to copy, the exception handler should find how many bytes left in the partial block (andi a2, STORMASK), add that to the partial block end address (a2), and subtract the faulting address to get the remainder. Currently it incorrectly subtracts the partial block start address (t1), which has additionally been clobbered to generate a jump target in memset_partial. Fix this by adding the block end address instead. This issue was found with the following test code: int j, k; for (j = 0; j < 512; j++) { if ((k = clear_user(NULL, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64). Suggested-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19108/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-16MIPS: memset.S: EVA & fault support for small_memsetMatt Redfearn1-1/+6
The MIPS kernel memset / bzero implementation includes a small_memset branch which is used when the region to be set is smaller than a long (4 bytes on 32bit, 8 bytes on 64bit). The current small_memset implementation uses a simple store byte loop to write the destination. There are 2 issues with this implementation: 1. When EVA mode is active, user and kernel address spaces may overlap. Currently the use of the sb instruction means kernel mode addressing is always used and an intended write to userspace may actually overwrite some critical kernel data. 2. If the write triggers a page fault, for example by calling __clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS is triggered. Fix these issues by replacing the sb instruction with the EX() macro, which will emit EVA compatible instuctions as required. Additionally implement a fault fixup for small_memset which sets a2 to the number of bytes that could not be cleared (as defined by __clear_user). Reported-by: Chuanhua Lei <chuanhua.lei@intel.com> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18975/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-11MIPS: Implement __multi3 for GCC7 MIPS64r6 buildsJames Hogan3-1/+73
GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit multiply with 128bit result) for MIPS64r6 builds, even in code which doesn't explicitly use 128bit types, such as the following: unsigned long func(unsigned long a, unsigned long b) { return a > (~0UL) / b; } Which GCC rearanges to: return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff; Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under normal circumstances we wouldn't expect any calls to __multi3 to be generated from kernel code. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: James Hogan <jhogan@kernel.org> Tested-by: Waldemar Brodkorb <wbx@openadk.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Matthew Fortune <matthew.fortune@mips.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17890/
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman13-0/+13
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-04MIPS: Add __ioread64_copyPaul Burton2-1/+43
We currently have __ioread32_copy, __iowrite32_copy & __iowrite64_copy helpers in lib/iomap_copy.c. This patch adds __ioread64_copy to round out the set, allowing copies from I/O memory using 32 or 64 bit reads. [ralf@linux-mips.org: Changed to move all the code of this patch to be applied to arch/mips temporarily.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Include asm/delay.h for __{,n,u}delay()Paul Burton1-0/+1
arch/mips/lib/delay.c provides our implementations of the __delay(), __ndelay() & __udelay() functions, but doesn't include the asm/delay.h header which declares them. This leads to warnings from sparse: arch/mips/lib/delay.c:26:6: warning: symbol '__delay' was not declared. Should it be static? arch/mips/lib/delay.c:50:6: warning: symbol '__udelay' was not declared. Should it be static? arch/mips/lib/delay.c:58:6: warning: symbol '__ndelay' was not declared. Should it be static? To keep checkpatch happy was well, include <linux/delay.h> rather than <asm/delay.h> directly to get the declarations of __delay(), __ndelay() & __udelay(). [ralf@linux-mips.org: Fixed to include <linux/delay.h.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17170/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-0/+3
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-06-29MIPS: R6: Fix PREF instruction usage by memcpy for MIPS R6Leonid Yegoshin1-0/+3
Disable usage of PREF instruction usage by memcpy for MIPS R6. MIPS R6 redefines PREF instruction with smaller offset than ordinary MIPS. However, the memcpy code uses PREF instruction with offsets bigger than +-256 bytes. Malta kernels already disable usage of PREF for memcpy. This was found during adaptation of MIPS R6 for virtual board used by Android emulator. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtech.com> Cc: James.Hogan@imgtec.com Cc: Paul.Burton@imgtec.com Cc: Raghu.Gandham@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: Douglas.Leung@imgtec.com Cc: Petar.Jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16510/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-05-16mips: get rid of unused __strnlen_user()Al Viro1-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-16get rid of unused __strncpy_from_user() instancesAl Viro1-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-16kill strlen_user()Al Viro2-66/+1
no callers, no consistent semantics, no sane way to use it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-06mips: get rid of tail-zeroing in primitivesAl Viro1-49/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-24MIPS: Fix modversionsArnd Bergmann3-7/+15
kernelci.org reports tons of build warnings for linux-next: 35 WARNING: "memcpy" [fs/fat/msdos.ko] has no CRC! 35 WARNING: "__copy_user" [fs/fat/fat.ko] has no CRC! 32 WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "__strncpy_from_user_nocheck_asm" [vmlinux] version generation failed, symbol will not be versioned. The problem here is mainly the missing asm/asm-prototypes.h header file that is supposed to include the prototypes for each symbol that is exported from an assembler file. A second problem is that the asm/uaccess.h header contains some but not all the necessary declarations for the user access helpers. Finally, the vdso build is broken once we add asm/asm-prototypes.h, so we have to fix this at the same time by changing the vdso header. My approach here is to just not look for exported symbols in the VDSO assembler files, as the symbols cannot be exported anyway. Fixes: 576a2f0c5c6d ("MIPS: Export memcpy & memset functions alongside their definitions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15038/ Patchwork: https://patchwork.linux-mips.org/patch/15069/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export memcpy & memset functions alongside their definitionsPaul Burton2-0/+14
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the memcpy & memset functions & variants thereof to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14514/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export string functions alongside their definitionsPaul Burton3-0/+10
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the strlen*, strnlen* & strncpy* functions to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14513/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export csum functions alongside their definitionsPaul Burton1-0/+6
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the csum_partial_* functions to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14512/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-11-04MIPS: dump_tlb: Fix printk continuationsJames Hogan2-31/+31
Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from TLB dumps on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Continuation is also used for the second line of each TLB entry printed in dump_tlb.c even though it has a newline, since it is a continuation of the interpretation of the same TLB entry. For example: [ 46.371884] Index: 0 pgmask=16kb va=77654000 asid=73 gid=00 [ri=0 xi=0 pa=ffc18000 c=5 d=0 v=1 g=0] [ri=0 xi=0 pa=ffc1c000 c=5 d=0 v=1 g=0] [ 46.385380] Index: 12 pgmask=16kb va=004b4000 asid=73 gid=00 [ri=0 xi=0 pa=00000000 c=0 d=0 v=0 g=0] [ri=0 xi=0 pa=ffb00000 c=5 d=1 v=1 g=0] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14444/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACYPaul Burton1-0/+4
Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC & CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be built to for PCI drivers using the MIPS-specific struct pci_controller API (hereafter "legacy" drivers) or more generic drivers using only functionality provided by the PCI core (hereafter "generic" drivers). The Kconfig entries are created such that platforms have to select CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no modification. The functions declared in pci.h are rearranged with those provided only by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to ensure they are only used in configurations where they are implemented. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14345/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: lib: Audit and remove any unnecessary uses of module.hPaul Gortmaker10-10/+12
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. The compiler.h additions are for an implict presence of the "notrace" which module.h brought in but export.h does not. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14034/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-28MIPS: lib: Mark intrinsics notraceHarvey Hunt7-7/+7
On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-28MIPS: lib: Fix typoAndrea Gelmini1-1/+1
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Print GuestCtl1 on machine check exceptionJames Hogan1-0/+2
The GuestCtl1 CP0 register can contain the GuestID used for root TLB operations, which affects TLB matching. The other TLB registers are already dumped out to the log on a machine check exception due to multiple matching TLB entries, so also dump the value of the GuestCtl1 register if GuestIDs are supported. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13232/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dump_tlb: Preserve and dump GuestIDJames Hogan1-3/+14
The GuestID for root TLB operations (GuestCtl1.RID) is modified by TLB reads, so needs preserving by dump_tlb() like the ASID field of EntryHi. Also dump the GuestID of each entry if it exists alongside the ASID, as it forms an important part of the TLB entry when VZ guests are used. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13230/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Retrieve ASID masks using function accepting struct cpuinfo_mipsPaul Burton2-8/+11
In preparation for supporting variable ASID masks, retrieve ASID masks using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This will allow those functions to determine the ASID mask based upon the CPU in a later patch. This also allows for the r3k & r8k cases to be handled in Kconfig, which is arguably cleaner than the previous #ifdefs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09MIPS: memset.S: Disable code unused with non-R6 MIPS configsMaciej W. Rozycki1-0/+2
This complements commit 8c56208aff77 ("MIPS: lib: memset: Add MIPS R6 support"). Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12452/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-22MIPS: Cleanup the unused __arch_local_irq_restore() functionHuacai Chen1-29/+1
In history, __arch_local_irq_restore() is only used by SMTC. However, SMTC support has been removed since 3.16, this patch remove the unused function. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22MIPS: uaccess: Take EVA into account in [__]clear_userJames Hogan1-0/+2
__clear_user() (and clear_user() which uses it), always access the user mode address space, which results in EVA store instructions when EVA is enabled even if the current user address limit is KERNEL_DS. Fix this by adding a new symbol __bzero_kernel for the normal kernel address space bzero in EVA mode, and call that from __clear_user() if eva_kernel_access(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-26MIPS: Use ARCH_USE_BUILTIN_BSWAP.Ralf Baechle3-1/+27
ARCH_USE_BUILTIN_BSWAP will use __builtin_bswap16(), __builtin_bswap32() and __builtin_bswap64() where available. This allows better instruction scheduling. On pre-R2 processors it will result in 32 bit and 64 bit swapping being performed in a call to a __bswapsi2() rsp. __bswapdi2() functions, so we add these, too. For a 4.2 kernel with GCC 4.9 this yields the following kernel sizes: text data bss dec hex filename 3996071 155804 88992 4240867 40b5e3 vmlinux ip22 baseline 3985687 159900 88992 4234579 409d53 vmlinux ip22 + bswap patch 6913157 378552 251024 7542733 7317cd vmlinux ip27 baseline 6878581 378552 251024 7508157 7290bd vmlinux ip27 + bswap patch 5773777 268752 187424 6229953 5f0fc1 vmlinux malta baseline 5773401 268752 187424 6229577 5f0e49 vmlinux malta + bswap patch Presumably the code size improvments yield better cache hit rate thus better performance compensating for the extra function call but this will still need to be benchmarked. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: Rearrange ENTRYLO field definitionsJames Hogan1-9/+9
The generic field definitions (i.e. present before MIPS32/MIPS64) in mipsregs.h are conventionally not prefixed with MIPS_, so rename the recently added MIPS_ENTRYLO_* definitions for the G, V, D, and C fields to ENTRYLO_*. Also rearrange to put the EntryLo and EntryHi definitions in the right place in the file. Fixes: 8ab6abcb6aa4 ("MIPS: mipsregs.h: Add EntryLo bit definitions") Reported-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10725/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: dump_tlb: Dump FrameMask register if existsJames Hogan1-0/+8
The FrameMask register is relevant to the TLB so it should be dumped by dump_tlb_regs(), however it is only present in certain cores (r10000, r12000, r14000, r16000). Add dumping of it, conditional upon current_cpu_type(). Suggested-by: Joshua Kinard <kumba@gentoo.org> Suggested-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10724/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: dump_tlb: Only dump PageGrain if interestingJames Hogan1-1/+2
The PageGrain register may not exist if certain architectural features aren't present, therefore only print out its value when dumping the TLB registers if it is expected to contain fields relevant to the TLB. Fixes: d1e9a4f54735 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") Reported-by: Joshua Kinard <kumba@gentoo.org> Reported-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10723/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: Refactor dumping of TLB registers for r3k/r4kJames Hogan2-0/+29
The TLB registers are dumped in a couble of places: - sysrq_tlbdump_single() - when dumping TLB state. - do_mcheck() - in response to a machine check error. The main TLB registers also differ between r3k and r4k, but r4k appears to be assumed. Refactor this code into a dump_tlb_regs() function, implemented for both r3k and r4k, and used by both of the above functions. Fixes: d1e9a4f54735 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") Suggested-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10721/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: tlb-r3k: Move CP0.Wired register initialisation to `tlb_init'Maciej W. Rozycki1-2/+0
Move the initialisation of the CP0.Wired register implemented by Toshiba TX3922 and TX3927 processors from `tx39_cache_init' to `tlb_init' where it belongs, correcting code structure and making sure initialisation does not rely on `tx39_cache_init' being called before `tlb_init' to work correctly. Make `r3k_have_wired_reg' static as it's no longer externally referred to; remove a stale declaration too. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10195/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: dump_tlb: Take XPA into accountJames Hogan1-5/+13
XPA extends the physical addresses on MIPS32, including the EntryLo registers. Update dump_tlb() to concatenate the PFNX field from the high end of the EntryLo registers (as read by mfhc0). The width of physical and virtual addresses are also separated to show only 8 nibbles of virtual but 11 nibbles of physical with XPA. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10077/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: dump_tlb: Take RI/XI bits into accountJames Hogan1-7/+20
The RI/XI bits when present are above the PFN field in the EntryLo registers, at bits 63,62 when read with dmfc0, and bits 31,30 when read with mfc0. This makes them appear as part of the physical address, since the other bits are masked with PAGE_MASK, for example: Index: 253 pgmask=16kb va=77b18000 asid=75 [pa=1000744000 c=5 d=1 v=1 g=0] [pa=100134c000 c=5 d=1 v=1 g=0] The physical addresses have bit 36 set, which corresponds to bit 30 of EntryLo1, the XI bit. Explicitly mask off the RI and XI bits from the printed physical address, and print the RI and XI bits separately if they exist, giving output more like this: Index: 226 pgmask=16kb va=77be0000 asid=79 [ri=0 xi=1 pa=01288000 c=5 d=1 v=1 g=0] [ri=0 xi=0 pa=010e4000 c=5 d=0 v=1 g=0] Cc: linux-mips@linux-mips.org Cc: James Hogan <james.hogan@imgtec.com> Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/10080/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: dump_tlb: Take EHINV bit into accountJames Hogan1-0/+3
The EHINV bit in EntryHi allows a TLB entry to be properly marked invalid so that EntryHi doesn't have to be set to a unique value to avoid machine check exceptions due to multiple matching entries. Unfortunately dump_tlb() doesn't take this into account so it will print all the uninteresting invalid TLB entries if the current ASID happens to be 00. Therefore add a condition to skip entries which are marked invalid with the EHINV bit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10076/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: dump_tlb: Take global bit into accountJames Hogan2-3/+12
The TLB only matches the ASID when the global bit isn't set, so dump_tlb() shouldn't really be skipping global entries just because the ASID doesn't match. Fix the condition to read the TLB entry's global bit from EntryLo0. Note that after a TLB read the global bits in both EntryLo registers reflect the same global bit in the TLB entry. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10079/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>