summaryrefslogtreecommitdiff
path: root/arch/parisc
AgeCommit message (Collapse)AuthorFilesLines
2021-02-22Merge branch 'parisc-5.12-1' of ↵Linus Torvalds15-232/+122
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - Optimize parisc page table locks by using the existing page_table_lock - Export argv0-preserve flag in binfmt_misc for usage in qemu-user - Fix interrupt table (IVT) checksum so firmware will call crash handler (HPMC) - Increase IRQ stack to 64kb on 64-bit kernel - Switch to common devmem_is_allowed() implementation - Minor fix to get_whan() * 'parisc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: binfmt_misc: pass binfmt_misc flags to the interpreter parisc: Optimize per-pagetable spinlocks parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag() parisc: Bump 64-bit IRQ stack size to 64 KB parisc: Fix IVT checksum calculation wrt HPMC parisc: Use the generic devmem_is_allowed() parisc: Drop out of get_whan() if task is running again
2021-02-21Merge tag 'oprofile-removal-5.12' of ↵Linus Torvalds4-36/+0
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux Pull oprofile and dcookies removal from Viresh Kumar: "Remove oprofile and dcookies support The 'oprofile' user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. The dcookies stuff is only used by the oprofile code. Now that oprofile's support is getting removed from the kernel, there is no need for dcookies as well. Remove kernel's old oprofile and dcookies support" * tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux: fs: Remove dcookies support drivers: Remove CONFIG_OPROFILE support arch: xtensa: Remove CONFIG_OPROFILE support arch: x86: Remove CONFIG_OPROFILE support arch: sparc: Remove CONFIG_OPROFILE support arch: sh: Remove CONFIG_OPROFILE support arch: s390: Remove CONFIG_OPROFILE support arch: powerpc: Remove oprofile arch: powerpc: Stop building and using oprofile arch: parisc: Remove CONFIG_OPROFILE support arch: mips: Remove CONFIG_OPROFILE support arch: microblaze: Remove CONFIG_OPROFILE support arch: ia64: Remove rest of perfmon support arch: ia64: Remove CONFIG_OPROFILE support arch: hexagon: Don't select HAVE_OPROFILE arch: arc: Remove CONFIG_OPROFILE support arch: arm: Remove CONFIG_OPROFILE support arch: alpha: Remove CONFIG_OPROFILE support
2021-02-21Merge branch 'work.elf-compat' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ELF compat updates from Al Viro: "Sanitizing ELF compat support, especially for triarch architectures: - X32 handling cleaned up - MIPS64 uses compat_binfmt_elf.c both for O32 and N32 now - Kconfig side of things regularized Eventually I hope to have compat_binfmt_elf.c killed, with both native and compat built from fs/binfmt_elf.c, with -DELF_BITS={64,32} passed by kbuild, but that's a separate story - not included here" * 'work.elf-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get rid of COMPAT_ELF_EXEC_PAGESIZE compat_binfmt_elf: don't bother with undef of ELF_ARCH Kconfig: regularize selection of CONFIG_BINFMT_ELF mips compat: switch to compat_binfmt_elf.c mips: don't bother with ELF_CORE_EFLAGS mips compat: don't bother with ELF_ET_DYN_BASE mips: KVM_GUEST makes no sense for 64bit builds... mips: kill unused definitions in binfmt_elf[on]32.c mips binfmt_elf*32.c: use elfcore-compat.h x32: make X32, !IA32_EMULATION setups able to execute x32 binaries [amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly elf_prstatus: collect the common part (everything before pr_reg) into a struct binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID
2021-02-12parisc: Optimize per-pagetable spinlocksHelge Deller9-214/+110
On parisc a spinlock is stored in the next page behind the pgd which protects against parallel accesses to the pgd. That's why one additional page (PGD_ALLOC_ORDER) is allocated for the pgd. Matthew Wilcox suggested that we instead should use a pointer in the struct page table for this spinlock and noted, that the comments for the PGD_ORDER and PMD_ORDER defines were wrong. Both suggestions are addressed with this patch. Instead of having an own spinlock to protect the pgd, we now switch to use the existing page_table_lock. Additionally, beside loading the pgd into cr25 in switch_mm_irqs_off(), the physical address of this lock is loaded into cr28 (tr4), so that we can avoid implementing a complicated lookup in assembly for this lock in the TLB fault handlers. The existing Hybrid L2/L3 page table scheme (where the pmd is adjacent to the pgd) has been dropped with this patch. Remove the locking in set_pte() and the huge-page pte functions too. They trigger a spinlock recursion on 32bit machines and seem unnecessary. Suggested-by: Matthew Wilcox <willy@infradead.org> Fixes: b37d1c1898b2 ("parisc: Use per-pagetable spinlock") Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-12parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag()Tiezhu Yang1-1/+1
Use test_tsk_thread_flag() directly instead of test_ti_thread_flag() to improve readability when the argument type is struct task_struct, it is similar with commit 5afc78551bf5 ("arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP"). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-12parisc: Bump 64-bit IRQ stack size to 64 KBJohn David Anglin1-0/+4
Bump 64-bit IRQ stack size to 64 KB. I had a kernel IRQ stack overflow on the mx3210 debian buildd machine. This patch increases the 64-bit IRQ stack size to 64 KB. The 64-bit stack size needs to be larger than the 32-bit stack size since registers are twice as big. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-12parisc: Fix IVT checksum calculation wrt HPMCSven Schnelle2-17/+2
On my C8000 a HPMC was triggered, but the HPMC handler wasn't called. I got the following chassis codes: <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu3> e800009803e00000 00000000001b28a3 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8400000000800000 CC_ERR_CPU_CHECK_SUMMARY <Cpu3> 37000f7303e00000 8400000000800000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> f600105e02e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED <Cpu3> 5600100b03e00000 00000000000001a0 CC_MC_OS_HPMC_LEN_ERR <Cpu2> 140003b202e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY <Cpu3> 5600106403e00000 fffffff0f043ad20 CC_MC_BR_TO_OS_HPMC_FAILED <Cpu3> 160012cf03e00000 030001001e000007 CC_MPS_CPU_WAITING <Cpu2> 5600100b02e00000 00000000000001a0 CC_MC_OS_HPMC_LEN_ERR <Cpu2> 5600106402e00000 fffffff0f0438e70 CC_MC_BR_TO_OS_HPMC_FAILED <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8400000000800000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 4000109f02e00000 0000000000000000 CC_MC_HPMC_INITIATED <Cpu2> 4000101902e00000 0000000000000000 CC_MC_MULTIPLE_HPMCS <Cpu2> 030010d502e00000 0000000000000000 CC_CPU_STOP C8000 PDC is complaining about our HPMC handler length, which is 1a0 (second part of the chassis code). Changing that to 0 makes the error go away: <Cpu0> e800009800e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu3> e800009803e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu1> e800009801e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu0> 37000f7300e00000 8060004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu3> 37000f7303e00000 8060004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu1> 37000f7301e00000 8060004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 37000f7302e00000 8060004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu0> f600105e00e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED <Cpu3> 5600109b03e00000 00000000001eb024 CC_MC_BR_TO_OS_HPMC <Cpu1> 5600109b01e00000 00000000001eb024 CC_MC_BR_TO_OS_HPMC <Cpu2> 5600109b02e00000 00000000001eb024 CC_MC_BR_TO_OS_HPMC <Cpu0> 140003b200e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY <Cpu3> 0000000003000000 0000000000000000 <Cpu1> 0000000001000000 0000000000000000 <Cpu2> 0000000002000000 0000000000000000 <Cpu0> 5600109b00e00000 00000000001eb024 CC_MC_BR_TO_OS_HPMC <Cpu0> 0000000000000000 0000000000000000 So at least the HPMC handler is now called, but it hangs. Which isn't really suprising, as the code has at least one comment saying it can't handle multiple CPUs, and here the handler is called on all CPUs. And i'm not sure whether it can handle 64 Bit. So despite what the PDC spec says, C8000 and RP34xx/RP44xx don't want the OS_HPMC length in the vector set, which is odd. I disassembled the firmware and it actually looks like a Bug in PDC. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-12parisc: Use the generic devmem_is_allowed()Helge Deller2-0/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-12parisc: Drop out of get_whan() if task is running againHelge Deller1-0/+2
Signed-off-by: Helge Deller <deller@gmx.de>
2021-01-29arch: parisc: Remove CONFIG_OPROFILE supportViresh Kumar4-36/+0
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Helge Deller <deller@gmx.de> # parisc
2021-01-26parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULESHelge Deller2-6/+12
When building a kernel without module support, the CONFIG_MLONGCALL option needs to be enabled in order to reach symbols which are outside of a 22-bit branch. This patch changes the autodetection in the Kconfig script to always enable CONFIG_MLONGCALL when modules are disabled and uses a far call to preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org # v5.6+
2021-01-26parisc: Remove leftover reference to the power_taskletDavidlohr Bueso1-3/+0
This was removed long ago, back in: 6e16d9409e1 ([PARISC] Convert soft power switch driver to kthread) Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
2021-01-06Kconfig: regularize selection of CONFIG_BINFMT_ELFAl Viro1-1/+0
with mips converted to use of fs/config_binfmt_elf.c, there's no need to keep selects of that thing all over arch/* - we can simply turn into def_bool y if COMPAT && BINFMT_ELF (in fs/Kconfig.binfmt) and get rid of all selects. Several architectures got those selects wrong (e.g. you could end up with sparc64 sans BINFMT_ELF, with select violating dependencies, etc.) Randy Dunlap has spotted some of those; IMO this is simpler than his fix, but it depends upon the stuff that would need to be backported, so we might end up using his variant for -stable. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-12-30local64.h: make <asm/local64.h> mandatoryRandy Dunlap1-1/+0
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-19epoll: wire up syscall epoll_pwait2Willem de Bruijn1-0/+1
Split off from prev patch in the series that implements the syscall. Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-18Merge tag 'trace-v5.11' of ↵Linus Torvalds1-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major update to this release is that there's a new arch config option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS. Currently, only x86_64 enables it. All the ftrace callbacks now take a struct ftrace_regs instead of a struct pt_regs. If the architecture has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will have enough information to read the arguments of the function being traced, as well as access to the stack pointer. This way, if a user (like live kernel patching) only cares about the arguments, then it can avoid using the heavier weight "regs" callback, that puts in enough information in the struct ftrace_regs to simulate a breakpoint exception (needed for kprobes). A new config option that audits the timestamps of the ftrace ring buffer at most every event recorded. Ftrace recursion protection has been cleaned up to move the protection to the callback itself (this saves on an extra function call for those callbacks). Perf now handles its own RCU protection and does not depend on ftrace to do it for it (saving on that extra function call). New debug option to add "recursed_functions" file to tracefs that lists all the places that triggered the recursion protection of the function tracer. This will show where things need to be fixed as recursion slows down the function tracer. The eval enum mapping updates done at boot up are now offloaded to a work queue, as it caused a noticeable pause on slow embedded boards. Various clean ups and last minute fixes" * tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Offload eval map updates to a work queue Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS" ring-buffer: Add rb_check_bpage in __rb_allocate_pages ring-buffer: Fix two typos in comments tracing: Drop unneeded assignment in ring_buffer_resize() tracing: Disable ftrace selftests when any tracer is running seq_buf: Avoid type mismatch for seq_buf_init ring-buffer: Fix a typo in function description ring-buffer: Remove obsolete rb_event_is_commit() ring-buffer: Add test to validate the time stamp deltas ftrace/documentation: Fix RST C code blocks tracing: Clean up after filter logic rewriting tracing: Remove the useless value assignment in test_create_synth_event() livepatch: Use the default ftrace_ops instead of REGS when ARGS is available ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs MAINTAINERS: assign ./fs/tracefs to TRACING tracing: Fix some typos in comments ftrace: Remove unused varible 'ret' ring-buffer: Add recording of ring buffer recursion into recursed_functions ...
2020-12-17Merge tag 'arm-soc-defconfig-5.11' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Arnd Bergmann: "These are the usual defconfig updates, adding support for additional modules and updating some files according to changes in Kconfig. I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple architectures, after the driver was removed" * tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits) powerpc/configs: drop unused BACKLIGHT_GENERIC option parisc: configs: drop unused BACKLIGHT_GENERIC option arm64: defconfig: drop unused BACKLIGHT_GENERIC option ARM: configs: drop unused BACKLIGHT_GENERIC option arm64: defconfig: Enable more Librem 5 hardware arm64: defconfig: Enable RTC_DRV_HYM8563 arm64: defconfig: Enable USB_SERIAL_CP210X arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY arm64: defconfig: Enable ROCKCHIP_LVDS arm64: defconfig: Enable ARM SCMI protocol and drivers ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers ARM: multi_v7_defconfig: enable STM32 dfsdm audio support ARM: multi_v7_defconfig: enable STM32 spdifrx support ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support ARM: multi_v7_defconfig: add STM32 crypto support ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module arm64: defconfig: Enable Qualcomm PON driver ARM: omap2plus_defconfig: Enable TI eQEP counter driver ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot ...
2020-12-16Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+5
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe: "This sits on top of of the core entry/exit and x86 entry branch from the tip tree, which contains the generic and x86 parts of this work. Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL. With that done, we can get rid of JOBCTL_TASK_WORK from task_work and signal.c, and also remove a deadlock work-around in io_uring around knowing that signal based task_work waking is invoked with the sighand wait queue head lock. The motivation for this work is to decouple signal notify based task_work, of which io_uring is a heavy user of, from sighand. The sighand lock becomes a huge contention point, particularly for threaded workloads where it's shared between threads. Even outside of threaded applications it's slower than it needs to be. Roman Gershman <romger@amazon.com> reported that his networked workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all spent hammering on the sighand lock, showing 57% of the CPU time there [1]. There are further cleanups possible on top of this. One example is TIF_PATCH_PENDING, where a patch already exists to use TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more consolidation, but the work stands on its own as well" [1] https://github.com/axboe/liburing/issues/215 * tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits) io_uring: remove 'twa_signal_ok' deadlock work-around kernel: remove checking for TIF_NOTIFY_SIGNAL signal: kill JOBCTL_TASK_WORK io_uring: JOBCTL_TASK_WORK is no longer used by task_work task_work: remove legacy TWA_SIGNAL path sparc: add support for TIF_NOTIFY_SIGNAL riscv: add support for TIF_NOTIFY_SIGNAL nds32: add support for TIF_NOTIFY_SIGNAL ia64: add support for TIF_NOTIFY_SIGNAL h8300: add support for TIF_NOTIFY_SIGNAL c6x: add support for TIF_NOTIFY_SIGNAL alpha: add support for TIF_NOTIFY_SIGNAL xtensa: add support for TIF_NOTIFY_SIGNAL arm: add support for TIF_NOTIFY_SIGNAL microblaze: add support for TIF_NOTIFY_SIGNAL hexagon: add support for TIF_NOTIFY_SIGNAL csky: add support for TIF_NOTIFY_SIGNAL openrisc: add support for TIF_NOTIFY_SIGNAL sh: add support for TIF_NOTIFY_SIGNAL um: add support for TIF_NOTIFY_SIGNAL ...
2020-12-16Merge branch 'parisc-5.11-1' of ↵Linus Torvalds6-21/+28
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "A change to increase the default maximum stack size on parisc to 100MB and the ability to further increase the stack hard limit size at runtime with ulimit for newly started processes. The other patches fix compile warnings, utilize the Kbuild logic and cleanups the parisc arch code" * 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: pci-dma: fix warning unused-function parisc/uapi: Use Kbuild logic to provide <asm/types.h> parisc: Make user stack size configurable parisc: Use _TIF_USER_WORK_MASK in entry.S parisc: Drop loops_per_jiffy from per_cpu struct
2020-12-16Merge tag 'seccomp-v5.11-rc1' of ↵Linus Torvalds2-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The major change here is finally gaining seccomp constant-action bitmaps, which internally reduces the seccomp overhead for many real-world syscall filters to O(1), as discussed at Plumbers this year. - Improve seccomp performance via constant-action bitmaps (YiFei Zhu & Kees Cook) - Fix bogus __user annotations (Jann Horn) - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)" * tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Update kernel config seccomp: Remove bogus __user annotations seccomp/cache: Report cache data through /proc/pid/seccomp_cache xtensa: Enable seccomp architecture tracking sh: Enable seccomp architecture tracking s390: Enable seccomp architecture tracking riscv: Enable seccomp architecture tracking powerpc: Enable seccomp architecture tracking parisc: Enable seccomp architecture tracking csky: Enable seccomp architecture tracking arm: Enable seccomp architecture tracking arm64: Enable seccomp architecture tracking selftests/seccomp: Compare bitmap vs filter overhead x86: Enable seccomp architecture tracking seccomp/cache: Add "emulator" to check if filter is constant allow seccomp/cache: Lookup syscall allowlist bitmap for fast path
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds2-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-16Merge tag 'asm-generic-mmu-context-5.11' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
2020-12-16Merge branch 'signal-for-v5.11' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal cleanup from Eric Biederman: "Remove a never used HP-UX compatibility from parisc headers and consolidating the SA_* flags definitions into a generic header as much as possible. We only have 32 SA_* flag bits total, so we need to be careful. But as this is the first addition in a decade or so I think we are fine for the forseeable future" * 'signal-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/parisc: Remove parisc specific definition of __ARCH_UAPI_SA_FLAGS
2020-12-16Merge tag 'irq-core-2020-12-15' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ...
2020-12-16Merge tag 'net-next-5.11' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
2020-12-15parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()Thomas Gleixner1-1/+1
The irq descriptor is already there, no need to look it up again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-parisc@vger.kernel.org Link: https://lore.kernel.org/r/20201210194043.659522455@linutronix.de
2020-12-15parisc/irq: Simplify irq count output for /proc/interruptsThomas Gleixner1-4/+1
The SMP variant works perfectly fine on UP as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-parisc@vger.kernel.org Link: https://lore.kernel.org/r/20201210194043.172893840@linutronix.de
2020-12-15Merge tag 'irqchip-5.11' of ↵Thomas Gleixner1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 5.11 from Marc Zyngier: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
2020-12-15parisc: pci-dma: fix warning unused-functionAnders Roxell1-1/+1
When building tinyconfig on parisc the following warnign shows up: /tmp/arch/parisc/kernel/pci-dma.c:338:12: warning: 'proc_pcxl_dma_show' defined but not used [-Wunused-function] static int proc_pcxl_dma_show(struct seq_file *m, void *v) ^~~~~~~~~~~~~~~~~~ Mark the function as __maybe_unused to fix the warning. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
2020-12-15Merge tag 'core-mm-2020-12-14' of ↵Linus Torvalds1-13/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kmap updates from Thomas Gleixner: "The new preemtible kmap_local() implementation: - Consolidate all kmap_atomic() internals into a generic implementation which builds the base for the kmap_local() API and make the kmap_atomic() interface wrappers which handle the disabling/enabling of preemption and pagefaults. - Switch the storage from per-CPU to per task and provide scheduler support for clearing mapping when scheduling out and restoring them when scheduling back in. - Merge the migrate_disable/enable() code, which is also part of the scheduler pull request. This was required to make the kmap_local() interface available which does not disable preemption when a mapping is established. It has to disable migration instead to guarantee that the virtual address of the mapped slot is the same across preemption. - Provide better debug facilities: guard pages and enforced utilization of the mapping mechanics on 64bit systems when the architecture allows it. - Provide the new kmap_local() API which can now be used to cleanup the kmap_atomic() usage sites all over the place. Most of the usage sites do not require the implicit disabling of preemption and pagefaults so the penalty on 64bit and 32bit non-highmem systems is removed and quite some of the code can be simplified. A wholesale conversion is not possible because some usage depends on the implicit side effects and some need to be cleaned up because they work around these side effects. The migrate disable side effect is only effective on highmem systems and when enforced debugging is enabled. On 64bit and 32bit non-highmem systems the overhead is completely avoided" * tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) ARM: highmem: Fix cache_is_vivt() reference x86/crashdump/32: Simplify copy_oldmem_page() io-mapping: Provide iomap_local variant mm/highmem: Provide kmap_local* sched: highmem: Store local kmaps in task struct x86: Support kmap_local() forced debugging mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL microblaze/mm/highmem: Add dropped #ifdef back xtensa/mm/highmem: Make generic kmap_atomic() work correctly mm/highmem: Take kmap_high_get() properly into account highmem: High implementation details and document API Documentation/io-mapping: Remove outdated blurb io-mapping: Cleanup atomic iomap mm/highmem: Remove the old kmap_atomic cruft highmem: Get rid of kmap_types.h xtensa/mm/highmem: Switch to generic kmap atomic sparc/mm/highmem: Switch to generic kmap atomic powerpc/mm/highmem: Switch to generic kmap atomic nds32/mm/highmem: Switch to generic kmap atomic ...
2020-12-15Merge tag 'arm64-upstream' of ↵Linus Torvalds2-33/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Expose tag address bits in siginfo. The original arm64 ABI did not expose any of the bits 63:56 of a tagged address in siginfo. In the presence of user ASAN or MTE, this information may be useful. The implementation is generic to other architectures supporting tags (like SPARC ADI, subject to wiring up the arch code). The user will have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if available, become visible in si_addr. - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the lowest 1GB to cope with the Raspberry Pi 4 limitations, to the detriment of other platforms. With these changes, the kernel scans the Device Tree dma-ranges and the ACPI IORT information before deciding on a smaller ZONE_DMA. - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building with LTO, there is an increased risk of the compiler converting an address dependency headed by a READ_ONCE() invocation into a control dependency and consequently allowing for harmful reordering by the CPU. - Add CPPC FFH support using arm64 AMU counters. - set_fs() removal on arm64. This renders the User Access Override (UAO) ARMv8 feature unnecessary. - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs identifier file for SMMUv3, stop event counters support for i.MX8MP, enable the perf events-based hard lockup detector. - Reorganise the kernel VA space slightly so that 52-bit VA configurations can use more virtual address space. - Improve the robustness of the arm64 memory offline event notifier. - Pad the Image header to 64K following the EFI header definition updated recently to increase the section alignment to 64K. - Support CONFIG_CMDLINE_EXTEND on arm64. - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8 bits for PtrAuth. - Switch to vmapped shadow call stacks. - Miscellaneous clean-ups. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits) perf/imx_ddr: Add system PMU identifier for userspace bindings: perf: imx-ddr: add compatible string arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE arm64: mark __system_matches_cap as __maybe_unused arm64: uaccess: remove vestigal UAO support arm64: uaccess: remove redundant PAN toggling arm64: uaccess: remove addr_limit_user_check() arm64: uaccess: remove set_fs() arm64: uaccess cleanup macro naming arm64: uaccess: split user/kernel routines arm64: uaccess: refactor __{get,put}_user arm64: uaccess: simplify __copy_user_flushcache() arm64: uaccess: rename privileged uaccess routines arm64: sdei: explicitly simulate PAN/UAO entry arm64: sdei: move uaccess logic to arch/arm64/ arm64: head.S: always initialize PSTATE arm64: head.S: cleanup SCTLR_ELx initialization arm64: head.S: rename el2_setup -> init_kernel_el arm64: add C wrappers for SET_PSTATE_*() ...
2020-12-09parisc: configs: drop unused BACKLIGHT_GENERIC optionAndrey Zhizhikin1-1/+0
Commit 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") removed geenric_bl driver from the tree, together with corresponding config option. Remove BACKLIGHT_GENERIC config item from generic-64bit_defconfig. Fixes: 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20201201222922.3183-5-andrey.zhizhikin@leica-geosystems.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-0/+3
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net: Add SO_BUSY_POLL_BUDGET socket optionBjörn Töpel1-0/+1
This option lets a user set a per socket NAPI budget for busy-polling. If the options is not set, it will use the default of 8. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
2020-12-01net: Introduce preferred busy-pollingBjörn Töpel1-0/+2
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket option or system-wide using the /proc/sys/net/core/busy_read knob, is an opportunistic. That means that if the NAPI context is not scheduled, it will poll it. If, after busy-polling, the budget is exceeded the busy-polling logic will schedule the NAPI onto the regular softirq handling. One implication of the behavior above is that a busy/heavy loaded NAPI context will never enter/allow for busy-polling. Some applications prefer that most NAPI processing would be done by busy-polling. This series adds a new socket option, SO_PREFER_BUSY_POLL, that works in concert with the napi_defer_hard_irqs and gro_flush_timeout knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were introduced in commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature"), and allows for a user to defer interrupts to be enabled and instead schedule the NAPI context from a watchdog timer. When a user enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled, and the NAPI context is being processed by a softirq, the softirq NAPI processing will exit early to allow the busy-polling to be performed. If the application stops performing busy-polling via a system call, the watchdog timer defined by gro_flush_timeout will timeout, and regular softirq handling will resume. In summary; Heavy traffic applications that prefer busy-polling over softirq processing should use this option. Example usage: $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout Note that the timeout should be larger than the userspace processing window, otherwise the watchdog will timeout and fall back to regular softirq processing. Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
2020-11-30signal/parisc: Remove parisc specific definition of __ARCH_UAPI_SA_FLAGSEric W. Biederman1-2/+0
Randy Dunlap wrote: > On 11/27/20 10:43 AM, Randy Dunlap wrote: > > > on parisc, _SA_SIGGFAULT is undefined and causing build errors. > > > > commit 23acdc76f1798b090bb9dcc90671cd29d929834e > > Author: Peter Collingbourne <pcc@google.com> > > Date: Thu Nov 12 18:53:34 2020 -0800 > > > > signal: clear non-uapi flag bits when passing/returning sa_flags > > > > > > > > _SA_SIGGFAULT is not used or defined anywhere else in the > > kernel source tree. > > > Here is the build error (although it should be obvious): > > ../kernel/signal.c: In function 'do_sigaction': > ../arch/parisc/include/asm/signal.h:24:30: error: '_SA_SIGGFAULT' undeclared (first use in this function) > 24 | #define __ARCH_UAPI_SA_FLAGS _SA_SIGGFAULT > | ^~~~~~~~~~~~~ Stephen Rothwell pointed out: > _SA_SIGGFAULT was removed by commit > > 41f5a81c07cd ("parisc: Drop HP-UX specific fcntl and signal flags") > > which was added to Linus' tree in v5.10-rc1. Solve this by removing the the parisc specific definition of __ARCH_UAPI_SA_FLAGS that was just added. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Fixes: 23acdc76f179 ("signal: clear non-uapi flag bits when passing/returning sa_flags") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-11-24sched/idle: Fix arch_cpu_idle() vs tracingPeter Zijlstra1-1/+1
We call arch_cpu_idle() with RCU disabled, but then use local_irq_{en,dis}able(), which invokes tracing, which relies on RCU. Switch all arch_cpu_idle() implementations to use raw_local_irq_{en,dis}able() and carefully manage the lockdep,rcu,tracing state like we do in entry. (XXX: we really should change arch_cpu_idle() to not return with interrupts enabled) Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
2020-11-23signal: clear non-uapi flag bits when passing/returning sa_flagsPeter Collingbourne1-0/+2
Previously we were not clearing non-uapi flag bits in sigaction.sa_flags when storing the userspace-provided sa_flags or when returning them via oldact. Start doing so. This allows userspace to detect missing support for flag bits and allows the kernel to use non-uapi bits internally, as we are already doing in arch/x86 for two flag bits. Now that this change is in place, we no longer need the code in arch/x86 that was hiding these bits from userspace, so remove it. This is technically a userspace-visible behavior change for sigaction, as the unknown bits returned via oldact.sa_flags are no longer set. However, we are free to define the behavior for unknown bits exactly because their behavior is currently undefined, so for now we can define the meaning of each of them to be "clear the bit in oldact.sa_flags unless the bit becomes known in the future". Furthermore, this behavior is consistent with OpenBSD [1], illumos [2] and XNU [3] (FreeBSD [4] and NetBSD [5] fail the syscall if unknown bits are set). So there is some precedent for this behavior in other kernels, and in particular in XNU, which is probably the most popular kernel among those that I looked at, which means that this change is less likely to be a compatibility issue. Link: [1] https://github.com/openbsd/src/blob/f634a6a4b5bf832e9c1de77f7894ae2625e74484/sys/kern/kern_sig.c#L278 Link: [2] https://github.com/illumos/illumos-gate/blob/76f19f5fdc974fe5be5c82a556e43a4df93f1de1/usr/src/uts/common/syscall/sigaction.c#L86 Link: [3] https://github.com/apple/darwin-xnu/blob/a449c6a3b8014d9406c2ddbdc81795da24aa7443/bsd/kern/kern_sig.c#L480 Link: [4] https://github.com/freebsd/freebsd/blob/eded70c37057857c6e23fae51f86b8f8f43cd2d0/sys/kern/kern_sig.c#L699 Link: [5] https://github.com/NetBSD/src/blob/3365779becdcedfca206091a645a0e8e22b2946e/sys/kern/sys_sig.c#L473 Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Link: https://linux-review.googlesource.com/id/I35aab6f5be932505d90f3b3450c083b4db1eca86 Link: https://lkml.kernel.org/r/878dbcb5f47bc9b11881c81f745c0bef5c23f97f.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23arch: move SA_* definitions to generic headersPeter Collingbourne1-13/+0
Most architectures with the exception of alpha, mips, parisc and sparc use the same values for these flags. Move their definitions into asm-generic/signal-defs.h and allow the architectures with non-standard values to override them. Also, document the non-standard flag values in order to make it easier to add new generic flags in the future. A consequence of this change is that on powerpc and x86, the constants' values aside from SA_RESETHAND change signedness from unsigned to signed. This is not expected to impact realistic use of these constants. In particular the typical use of the constants where they are or'ed together and assigned to sa_flags (or another int variable) would not be affected. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528 Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23parisc: start using signal-defs.hPeter Collingbourne1-12/+1
We currently include signal-defs.h on all architectures except parisc. Make parisc fall in line. This will make maintenance easier once the flag bits are moved here. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Helge Deller <deller@gmx.de> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Link: https://linux-review.googlesource.com/id/If03a5135fb514fe96548fb74610e6c3586a04064 Link: https://lkml.kernel.org/r/be8f3680ef2d0a1a120994e3ae0b11d82f373279.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23parisc: Drop parisc special case for __sighandler_tHelge Deller1-8/+0
I believe we can and *should* drop this parisc-specific typedef for __sighandler_t when compiling a 64-bit kernel. The reasons: 1. We don't have a 64-bit userspace yet, so nothing (on userspace side) can break. 2. Inside the Linux kernel, this is only used in kernel/signal.c, in function kernel_sigaction() where the signal handler is compared against SIG_IGN. SIG_IGN is defined as (__sighandler_t)1), so only the pointers are compared. 3. Even when a 64-bit userspace gets added at some point, I think __sighandler_t should be defined what it is: a function pointer struct. I compiled kernel/signal.c with and without the patch, and the produced code is identical in both cases. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I21c43f21b264f339e3aa395626af838646f62d97 Link: https://lkml.kernel.org/r/a75b8eb7bb9eac1cf73fb119eb53e5892d6e9656.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23parisc: Remove bogus __IRQ_STAT macroThomas Gleixner1-1/+0
This is a leftover from a historical array based implementation and unused. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141732.680780121@linutronix.de
2020-11-20parisc: Enable seccomp architecture trackingYiFei Zhu2-1/+22
To enable seccomp constant action bitmaps, we need to have a static mapping to the audit architecture and system call table size. Add these for parisc. Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/9bb86c546eda753adf5270425e7353202dbce87c.1605101222.git.yifeifz2@illinois.edu
2020-11-13ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regsSteven Rostedt (VMware)1-3/+5
In preparation to have arguments of a function passed to callbacks attached to functions as default, change the default callback prototype to receive a struct ftrace_regs as the forth parameter instead of a pt_regs. For callbacks that set the FL_SAVE_REGS flag in their ftrace_ops flags, they will now need to get the pt_regs via a ftrace_get_regs() helper call. If this is called by a callback that their ftrace_ops did not have a FL_SAVE_REGS flag set, it that helper function will return NULL. This will allow the ftrace_regs to hold enough just to get the parameters and stack pointer, but without the worry that callbacks may have a pt_regs that is not completely filled. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-11parisc/uapi: Use Kbuild logic to provide <asm/types.h>Geert Uytterhoeven1-7/+0
Uapi <asm-generic/types.h> just includes <asm-generic/int-ll64.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de>
2020-11-11parisc: Make user stack size configurableHelge Deller2-7/+23
On parisc we need to initialize the memory layout for the user stack at process start time to a fixed size, which up until now was limited to the size as given by CONFIG_MAX_STACK_SIZE_MB at compile time. This hard limit was too small and showed problems when compiling ruby2.7, qmlcachegen and some Qt packages. This patch changes two things: a) It increases the default maximum stack size to 100MB. b) Users can modify the stack hard limit size with ulimit and then newly forked processes will use the given stack size which can even be bigger than the default 100MB. Reported-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2020-11-11parisc: Use _TIF_USER_WORK_MASK in entry.SHelge Deller1-2/+2
The constant _TIF_USER_WORK_MASK will get extended by additional flags in the future, so check against the bits set in this mask - with the exception of _TIF_NEED_RESCHED which was tested a few lines above. Signed-off-by: Helge Deller <deller@gmx.de>
2020-11-11parisc: Drop loops_per_jiffy from per_cpu structHelge Deller2-4/+2
There is no need to keep a loops_per_jiffy value per cpu. Drop it. Signed-off-by: Helge Deller <deller@gmx.de>
2020-11-09parisc: add support for TIF_NOTIFY_SIGNALJens Axboe2-2/+5
Wire up TIF_NOTIFY_SIGNAL handling for parisc. Cc: linux-parisc@vger.kernel.org Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 09:39:49 +0300