summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/pmac32_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2011-04-27powerpc: Fix build warning of the defconfigsWanlong Gao1-2/+2
BT_L2CAP and BT_SCO have changed to bool . Value 'm' has invalid . Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt1-1883/+3
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely1-2/+1
Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02powerpc/pmac: Update PowerMac 32-bit defconfigBenjamin Herrenschmidt1-83/+195
This mostly adds back AppleTouch support and adds CONFIG_HIGHMEM by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-26eeprom: More consistent symbol namesJean Delvare1-2/+2
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2008-11-11powerpc: Update desktop/server defconfigsPaul Mackerras1-35/+125
Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26powerpc: Update defconfigs for most non-embedded platformsPaul Mackerras1-119/+122
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20[POWERPC] Update defconfigs for desktop/server systemsPaul Mackerras1-64/+110
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-07[POWERPC] Remove CONFIG_PCI_LEGACY from some configsStephen Rothwell1-4/+3
This will remove some build warnings and doesn't stop us building any drivers that we were building previously with these configs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras1-73/+122
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06[POWERPC] Update defconfigsPaul Mackerras1-83/+134
This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-19serial: turn serial console suspend a boot rather than compile time optionAndres Salomon1-1/+0
Currently, there's a CONFIG_DISABLE_CONSOLE_SUSPEND that allows one to stop the serial console from being suspended when the rest of the machine goes to sleep. This is incredibly useful for debugging power management-related things; however, having it as a compile-time option has proved to be incredibly inconvenient for us (OLPC). There are plenty of times that we want serial console to not suspend, but for the most part we'd like serial console to be suspended. This drops CONFIG_DISABLE_CONSOLE_SUSPEND, and replaces it with a kernel boot parameter (no_console_suspend). By default, the serial console will be suspended along with the rest of the system; by passing 'no_console_suspend' to the kernel during boot, serial console will remain alive during suspend. For now, this is pretty serial console specific; further fixes could be applied to make this work for things like netconsole. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[POWERPC] Enable SLUB in *_defconfigAnton Blanchard1-3/+4
When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] Update defconfigsPaul Mackerras1-152/+85
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-30Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATIONRafael J. Wysocki1-1/+1
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-26[POWERPC] Update defconfigsPaul Mackerras1-196/+179
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22[POWERPC] Update defconfigsPaul Mackerras1-55/+147
Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26[POWERPC] update powerpc defconfig files after libata kconfig breakageOlaf Hering1-1/+1
Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26[POWERPC] enable sysrq in pmac32_defconfigOlaf Hering1-1/+1
Enable sysrq also for pmac32 Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-10[POWERPC] Update defconfigsPaul Mackerras1-7/+11
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-25[POWERPC] fix up front-LED KconfigJohannes Berg1-16/+96
This patch fixes the front-LED Kconfig issues I introduced while creating it. Apparently having a dependency isn't enough to have the select not evaluated or something like that. The patch also changes the default configuration for pmac32 select the default for the LED to be the IDE trigger. While I was at it, I completely updated the defconfig and also added snd-aoa to it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15[POWERPC] update pmac32_defconfigAnton Blanchard1-80/+124
Some updates to the pmac32_defconfig to make it more useful: - Enable LSF (large single files) since we enable LBD (large block devices) - Enable IPSEC related options - Enable remaining raid/dm options as modules - Disable eth1394, I doubt any has that hardware and it has a nasty habit of auto loading first and skewing network device numbering - Enable dummy and tun as modules, always useful to have them around - Enable EHCI, no wonder my usb2 disk was so slow - Enable USB storage - Enable ext3 acls - Disable autofs and enable autofsv4 instead - Enable nfs v3/v4 client and server. Dont want to be left in the dark ages of pre v3 - Enable all crypto as modules, things like cryptsetup want some of them I havent enabled the BCM43xx, perhaps we should now? Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16powerpc: update defconfigsPaul Mackerras1-28/+49
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15[PATCH] powerpc: Update pmac32_defconfigBenjamin Herrenschmidt1-45/+60
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Add pmac32 defconfig for ARCH=powerpcBenjamin Herrenschmidt1-0/+1729
This adds a defconfig for PowerMac with ARCH=powerpc Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>