| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove CONFIG_CRASH_DUMP dependency on CONFIG_KEXEC. CONFIG_KEXEC_CORE
was used at places where CONFIG_CRASH_DUMP or CONFIG_CRASH_RESERVE was
appropriate. Replace with appropriate #ifdefs to support CONFIG_KEXEC
and !CONFIG_CRASH_DUMP configuration option. Also, make CONFIG_FA_DUMP
dependent on CONFIG_CRASH_DUMP to avoid unmet dependencies for FA_DUMP
with !CONFIG_KEXEC_CORE configuration option.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240226103010.589537-4-hbathini@linux.ibm.com
|
|
Nathan reported below building error:
=====
$ curl -LSso .config https://git.alpinelinux.org/aports/plain/community/linux-edge/config-edge.armv7
$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- olddefconfig all
..
arm-linux-gnueabi-ld: arch/arm/kernel/machine_kexec.o: in function `arch_crash_save_vmcoreinfo':
machine_kexec.c:(.text+0x488): undefined reference to `vmcoreinfo_append_str'
====
On architecutres, like arm, s390, ppc, sh, function
arch_crash_save_vmcoreinfo() is located in machine_kexec.c and it can
only be compiled in when CONFIG_KEXEC_CORE=y.
That's not right because arch_crash_save_vmcoreinfo() is used to export
arch specific vmcoreinfo. CONFIG_VMCORE_INFO is supposed to control its
compiling in. However, CONFIG_VMVCORE_INFO could be independent of
CONFIG_KEXEC_CORE, e.g CONFIG_PROC_KCORE=y will select CONFIG_VMVCORE_INFO.
Or CONFIG_KEXEC/CONFIG_KEXEC_FILE is set while CONFIG_CRASH_DUMP is
not set, it will report linking error.
So, on arm, s390, ppc and sh, move arch_crash_save_vmcoreinfo out to
a new file vmcore_info.c. Let CONFIG_VMCORE_INFO decide if compiling in
arch_crash_save_vmcoreinfo().
[akpm@linux-foundation.org: remove stray newlines at eof]
Link: https://lkml.kernel.org/r/20240129135033.157195-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240126045551.GA126645@dev-arch.thelio-3990X/T/#u
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CPU features can be determined in makedumpfile, using
'cur_cpu_spec.cpu_features'.
This provides more data to makedumpfile about the crashed system, and
can help in filtering the vmcore accordingly.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230920105706.853626-2-adityag@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
|
|
Since below commit, address mapping for vmemmap has changed for Radix
MMU, where address mapping is stored in kernel page table itself,
instead of earlier used 'vmemmap_list'.
commit 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use
a different vmemmap handling function")
Hence with upstream kernel, in case of Radix MMU, makedumpfile fails
to do address translation for vmemmap addresses, as it depended on
vmemmap_list, which can now be empty.
While fixing the address translation in makedumpfile, it was identified
that currently makedumpfile cannot distinguish between Hash MMU and
Radix MMU, unless VMLINUX is passed with -x flag to makedumpfile. And
hence fails to assign offsets and shifts correctly (such as in L4 to
PGDIR offset calculation in makedumpfile).
For getting the MMU, makedumpfile uses `cur_cpu_spec.mmu_features`.
Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec`
struct, to VMCOREINFO, so that makedumpfile can assign the offsets
correctly, without needing a VMLINUX.
Also, even along with `cur_cpu_spec->mmu_features` makedumpfile has to
depend on the 'MMU_FTR_TYPE_RADIX' flag in mmu_features, implying kernel
developers need to be cautious of changes to 'MMU_FTR_*' defines.
A more stable approach was suggested in the below thread by contributors:
https://lore.kernel.org/linuxppc-dev/20230920105706.853626-1-adityag@linux.ibm.com/
The suggestion was to add whether 'RADIX_MMU' is enabled in vmcoreinfo
This patch also implements the suggestion, by adding 'RADIX_MMU' in
vmcoreinfo, which makedumpfile can use to get whether the crashed system
had RADIX MMU (in which case 'NUMBER(RADIX_MMU)=1') or not (in which
case 'NUMBER(RADIX_MMU)=0')
Fixes: 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023072612.50874-1-adityag@linux.ibm.com
|
|
This reverts commit 7135b921b32966d7602ede396b7286d372aee63f.
I applied this commit prematurely while there was still discussion
ongoing. Revert it so the final patch can be applied cleanly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Presently, while reading a vmcore, makedumpfile uses
`cur_cpu_spec.mmu_features` to decide whether the crashed system had
RADIX MMU or not.
Currently, makedumpfile fails to get the `cur_cpu_spec` symbol (unless
a vmlinux is passed with the `-x` flag to makedumpfile), and hence
assigns offsets and shifts (such as pgd_offset_l4) incorrecly considering
MMU to be hash MMU.
Add `cur_cpu_spec` symbol and offset of `mmu_features` in the
`cpu_spec` struct, to VMCOREINFO, so that the symbol address and offset
is accessible to makedumpfile, without needing the vmlinux file
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230911091409.415662-1-adityag@linux.ibm.com
|
|
Since commit e641eb03ab2b0 ("powerpc: Fix up the kdump base cap to
128M") memory for kdump kernel has been reserved at an offset of 128MB.
This held up well for a long time before running into boot failure on
LPARs having a lot of cores. Commit 7c5ed82b800d8 ("powerpc: Set
crashkernel offset to mid of RMA region") fixed this boot failure by
moving the offset to mid of RMA region. This change meant the offset is
either 256MB or 512MB on LPARs as ppc64_rma_size was 512MB or 1024MB
owing to commit 103a8542cb35b ("powerpc/book3s64/ radix: Fix boot
failure with large amount of guest memory").
But ppc64_rma_size can be larger as well with newer f/w. So, limit
crashkernel reservation offset to 512MB to avoid running into boot
failures during kdump kernel boot, due to RTAS or other allocation
restrictions.
Also, while here, use SZ_128M instead of opening coding it.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220912065031.57416-1-hbathini@linux.ibm.com
|
|
Trying to remove asm/ppc_asm.h from all places that don't need it
leads to several failures linked to firmware_has_feature().
To fix it, include asm/firmware.h in all files using
firmware_has_feature()
All users found with:
git grep -L "firmware\.h" ` git grep -l "firmware_has_feature("`
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/11956ec181a034b51a881ac9c059eea72c679a73.1651828453.git.christophe.leroy@csgroup.eu
|
|
asm/machdep.h doesn't need asm/setup.h
Remove it.
Add it directly in files that needs it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
|
|
Several files include asm/prom.h for no reason.
Clean it up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
|
|
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
|
|
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/
kexec`) are deserving of an `__init` macro attribute. These functions are
only called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
|
|
ppc_md.iommu_save() is not set anymore by any platform after
commit c40785ad305b ("powerpc/dart: Use a cachable DART").
So iommu_save() has become a nop and can be removed.
ppc_md.show_percpuinfo() is not set anymore by any platform after
commit 4350147a816b ("[PATCH] ppc64: SMU based macs cpufreq support").
Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were
removed by commit 0f03a43b8f0f ("[POWERPC] Remove todc code from
ARCH=powerpc")
Last user of kgdb_map_scc() was removed by commit 17ce452f7ea3 ("kgdb,
powerpc: arch specific powerpc kgdb support").
ppc.machine_kexec_prepare() has not been used since
commit 8ee3e0d69623 ("powerpc: Remove the main legacy iSerie platform
code"). This allows the removal of machine_kexec_prepare() and the
rename of default_machine_kexec_prepare() into machine_kexec_prepare()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
[mpe: Drop prototype for default_machine_kexec_prepare() as noted by dja]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24d4ca0ada683c9436a5f812a7aeb0a1362afa2b.1630398606.git.christophe.leroy@csgroup.eu
|
|
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA
configuration options are equivalent.
Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead.
Done with
$ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \
$(git grep -wl CONFIG_NEED_MULTIPLE_NODES)
$ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \
$(git grep -wl NEED_MULTIPLE_NODES)
with manual tweaks afterwards.
[rppt@linux.ibm.com: fix arm boot crash]
Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com
Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
if (fadump_reserve_mem() == 0)
reserve_crashkernel();
...
/* Ensure that total memory size is page-aligned. */
limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
|
|
arch/powerpc/kernel/ contains 8 files dedicated to kexec.
Move them into a dedicated subdirectory.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Move to a/p/kexec, drop the 'machine' naming and use 'core' instead]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/afbef97ec6a978574a5cf91a4441000e0a9da42a.1572351221.git.christophe.leroy@c-s.fr
|
