Age | Commit message (Collapse) | Author | Files | Lines |
|
There are places where CONFIG_MODULES guards the code that depends on
memory allocation being done with module_alloc().
Replace CONFIG_MODULES with CONFIG_EXECMEM in such places.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
mark_rodata_ro() and mark_initmem_nx() use functions that can
fail like set_memory_nx() and set_memory_ro(), leading to a not
protected kernel.
In case of failure, panic.
Link: https://github.com/KSPP/linux/issues/7
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b16329611deb89e1af505d43f0e2a91310584d26.1710587887.git.christophe.leroy@csgroup.eu
|
|
On 603 MMU, TLB missed are handled by SW and there are separated
DTLB and ITLB. It is therefore possible to implement execute-only
protection by not loading DTLB when read access is not permitted.
To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.
As _PAGE_NONE can also be implemented by clearing _PAGE_READ, remove
_PAGE_USER and add _PAGE_READ. Then use the virtual address to know
whether user rights or kernel rights are to be used.
With that change, 603 MMU now honors execute-only protection.
For hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b7702dd5a041ec59055ed2880f4952e94c087a2e.1695659959.git.christophe.leroy@csgroup.eu
|
|
Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842deb1 ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.
For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5798782869fe4d2698f104948dabd17657b89395.1695659959.git.christophe.leroy@csgroup.eu
|
|
pte_user() may return 'false' when a user page is PAGE_NONE.
In that case it is still a user page and needs to be handled
as such. So use is_kernel_addr() instead.
And remove "user" text from ptdump as ptdump only dumps
kernel tables.
Note: no change done for book3s/64 which still has it
'priviledge' bit.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c778dad89fad07727c31717a9c62f45357c29ebc.1695659959.git.christophe.leroy@csgroup.eu
|
|
Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[mpe: Fixup selftests that stub asm/export.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-2-masahiroy@kernel.org
|
|
On book3s/32 KUAP is performed at segment level. At the moment,
when enabling userspace access, only current segment is modified.
Then if a write is performed on another user segment, a fault is
taken and all other user segments get enabled for userspace
access. This then require special attention when disabling
userspace access.
Having a userspace write access crossing a segment boundary is
unlikely. Having a userspace write access crossing a segment boundary
back and forth is even more unlikely. So, instead of enabling
userspace access on all segments when a write fault occurs, just
change which segment has userspace access enabled in order to
eliminate the case when more than one segment has userspace access
enabled. That simplifies userspace access deactivation.
There is however a corner case which is even more unlikely but has
to be handled anyway: an unaligned access which is crossing a
segment boundary. That would definitely require at least having
userspace access enabled on the two segments. To avoid complicating
the likely case for a so unlikely happening, handle such situation
like an alignment exception and emulate the store.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8de8580513c1a6e880bad1ba9a69d3efad3d4fa5.1689091022.git.christophe.leroy@csgroup.eu
|
|
All but book3s/64 use a static branch key for disabling kuap.
book3s/64 uses an mmu feature.
Refactor all targets to use MMU_FTR_KUAP like book3s/64.
For PPC32 that implies updating mmu features fixups once KUAP
has been initialised.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6b3d7c977bad73378ea368bc6818e9c94ea95ab0.1689091022.git.christophe.leroy@csgroup.eu
|
|
kuep_is_disabled() was introduced by commit 91bb30822a2e ("powerpc/32s:
Refactor update of user segment registers") but then all users but one
were removed by commit 526d4a4c77ae ("powerpc/32s: Do kuep_lock() and
kuep_unlock() in assembly").
Fold kuep_is_disabled() into init_new_context() which is its only user.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b2247147c0a8c830ac82966451647850df4a64da.1689091022.git.christophe.leroy@csgroup.eu
|
|
LLVM assembler does not recognise 3-operand cmpi, use cmpwi.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230606131828.315427-1-npiggin@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-34-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
update_mmu_cache() voids when hash page tables are not used.
On PPC32 that means when MMU_FTR_HPTE_TABLE is not defined.
On PPC64 that means when RADIX is enabled.
Rename core part of update_mmu_cache() as __update_mmu_cache()
and include the initial verification in an inlined caller.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bea5ad0de7f83eff256116816d46c84fa0a444de.1662370698.git.christophe.leroy@csgroup.eu
|
|
powerpc has a number of read-only sections and tables that are put after
RO_DATA(). Move the __end_rodata symbol to cover these as well.
Setting memory to read-only at boot is done using __init_begin, change
that to use __end_rodata.
This makes is_kernel_rodata() exactly cover the read-only region, as
well as other things using __end_rodata (e.g., kernel/dma/debug.c).
Boot dmesg also prints the rodata size more accurately.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-2-npiggin@gmail.com
|
|
Currently __init_begin is used as the boundary for strict RWX between
executable/read-only text and data, and non-executable (after boot) code
and data.
But that's a little subtle, so add an explicit symbol to document that
the SRWX boundary lies there, and add a comment making it clear that
__init_begin must also begin there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916131422.318752-2-mpe@ellerman.id.au
|
|
Always set an IBAT covering up to _einittext during init because when
CONFIG_MODULES is not selected there is no reason to have an exception
handler for kernel instruction TLB misses.
It implies DBAT and IBAT are now totaly independent, IBATs are set
by setibat() and DBAT by setbat().
This allows to revert commit 9bb162fa26ed ("powerpc/603: Fix
boot failure with DEBUG_PAGEALLOC and KFENCE")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce7f04a39593934d9b1ee68c69144ccd3d4da4a1.1655202804.git.christophe.leroy@csgroup.eu
|
|
Mapping without BATs doesn't bring any added value to the user.
Remove that option.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6977314c823cfb728bc0273cea634b41807bfb64.1655202721.git.christophe.leroy@csgroup.eu
|
|
Several files include asm/prom.h for no reason.
Clean it up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
|
|
It has been reported some configuration where the kernel doesn't
boot with KASAN enabled.
This is due to wrong BAT allocation for the KASAN area:
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m
3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m
4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m
A BAT must have both virtual and physical addresses alignment matching
the size of the BAT. This is not the case for BAT 4 above.
Fix kasan_init_region() by using block_size() function that is in
book3s32/mmu.c. To be able to reuse it here, make it non static and
change its name to bat_block_size() in order to avoid name conflict
with block_size() defined in <linux/blkdev.h>
Also reuse find_free_bat() to avoid an error message from setbat()
when no BAT is available.
And allocate memory outside of linear memory mapping to avoid
wasting that precious space.
With this change we get correct alignment for BATs and KASAN shadow
memory is allocated outside the linear memory space.
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw
3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw
4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw
Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu
|
|
Some functions defined in 'arch/powerpc/mm' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-4-nick.child@ibm.com
|
|
Today we have the following IBATs allocated:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m
5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m
6: -
7: -
The two 128K should be a single 256K instead.
When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.
Instead, align the top to 128Kbytes so that the function directly
allocates a 256Kbytes last block:
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m
4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m
5: -
6: -
7: -
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu
|
|
Deactivating KUEP at boot time is unrelevant for PPC32 and BOOK3E/64.
Remove it.
It allows to refactor setup_kuep() via a __weak function
that only PPC64s will overide for now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix CONFIG_PPC_BOOKS_64 -> CONFIG_PPC_BOOK3S_64 typo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4c36df18b41c988c4512f45d96220486adbe4c99.1634627931.git.christophe.leroy@csgroup.eu
|
|
Calling 'mfsr' to get the content of segment registers is heavy,
in addition it requires clearing of the 'reserved' bits.
In order to avoid this operation, save it in mm context and in
thread struct.
The saved sr0 is the one used by kernel, this means that on
locking entry it can be used as is.
For unlocking, the only thing to do is to clear SR_NX.
This improves null_syscall selftest by 12 cycles, ie 4%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02baf2ed8f09bad910dfaeeb7353b2ae6830525.1634627931.git.christophe.leroy@csgroup.eu
|
|
When interrupt and syscall entries where converted to C, KUEP locking
and unlocking was also converted. It improved performance by unrolling
the loop, and allowed easily implementing boot time deactivation of
KUEP.
However, null_syscall selftest shows that KUEP is still heavy
(361 cycles with KUEP, 212 cycles without).
A way to improve more is to group 'mtsr's together, instead of
repeating 'addi' + 'mtsr' several times.
In order to do that, more registers need to be available. In C, GCC
will always be able to provide the requested number of registers, but
at the cost of saving some data on the stack, which is counter
performant here.
So let's do it in assembly, when we have full control of which
register can be used. It also has the advantage of locking earlier
and unlocking later and it helps GCC generating less tricky code.
The only drawback is to make boot time deactivation less straight
forward and require 'hand' instruction patching.
Group 'mtsr's by 4.
With this change, null_syscall selftest reports 336 cycles. Without
the change it was 361 cycles, that's a 7% reduction.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/115cb279e9b9948dfd93a065e047081c59e3a2a6.1634627931.git.christophe.leroy@csgroup.eu
|
|
Disabling KUEP at boottime makes things unnecessarily complex.
Still allow disabling KUEP at build time, but when it's built-in
it is always there.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/96f583f82423a29a4205c60b9721079111b35567.1634627931.git.christophe.leroy@csgroup.eu
|
|
On SMP, setup_kup() is also called from start_secondary().
start_secondary() is not an __init function.
Remove the __init marker from setup_kuep() and setup_kuap().
Fixes: 86f46f343272 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42f4bd12b476942e4d5dc81c0e839d8871b20b1c.1624863319.git.christophe.leroy@csgroup.eu
|
|
PTE_SIZE means PTE page table size in most placed, whereas
in hash_low.S in means size of one entry in the table.
Rename it PTE_T_SIZE, and define it directly in hash_low.S
instead of going through asm-offsets.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83a008a9fd6cc3f2bbcb470f592555d260ed7a3d.1623063174.git.christophe.leroy@csgroup.eu
|
|
On book3s/32, KUAP is provided by toggling Ks bit in segment registers.
One segment register addresses 256M of virtual memory.
At the time being, KUAP implements a complex logic to apply the
unlock/lock on the exact number of segments covering the user range
to access, with saving the boundaries of the range of segments in
a member of thread struct.
But most if not all user accesses are within a single segment.
Rework KUAP with a different approach:
- Open only one segment, the one corresponding to the starting
address of the range to be accessed.
- If a second segment is involved, it will generate a page fault. The
segment will then be open by the page fault handler.
The kuap member of thread struct will now contain:
- The start address of the current on going user access, that will be
used to know which segment to lock at the end of the user access.
- ~0 when no user access is open
- ~1 when additionnal segments are opened by a page fault.
Then, at lock time
- When only one segment is open, close it.
- When several segments are open, close all user segments.
Almost 100% of the time, only one segment will be involved.
In interrupts, inline the function that unlock/lock all segments,
because not inlining them implies a lot of register save/restore.
With the patch, writing value 128 in userspace in perf_copy_attr() is
done with 16 instructions:
3890: 93 82 04 dc stw r28,1244(r2)
3894: 7d 20 e5 26 mfsrin r9,r28
3898: 55 29 00 80 rlwinm r9,r9,0,2,0
389c: 7d 20 e1 e4 mtsrin r9,r28
38a0: 4c 00 01 2c isync
38a4: 39 20 00 80 li r9,128
38a8: 91 3c 00 00 stw r9,0(r28)
38ac: 81 42 04 dc lwz r10,1244(r2)
38b0: 39 00 ff ff li r8,-1
38b4: 91 02 04 dc stw r8,1244(r2)
38b8: 2c 0a ff fe cmpwi r10,-2
38bc: 41 82 00 88 beq 3944 <perf_copy_attr+0x36c>
38c0: 7d 20 55 26 mfsrin r9,r10
38c4: 65 29 40 00 oris r9,r9,16384
38c8: 7d 20 51 e4 mtsrin r9,r10
38cc: 4c 00 01 2c isync
...
3944: 48 00 00 01 bl 3944 <perf_copy_attr+0x36c>
3944: R_PPC_REL24 kuap_lock_all_ool
Before the patch it was 118 instructions. In reality only 42 are
executed in most cases, but GCC is not able to see that a properly
aligned user access cannot involve more than one segment.
5060: 39 1d 00 04 addi r8,r29,4
5064: 3d 20 b0 00 lis r9,-20480
5068: 7c 08 48 40 cmplw r8,r9
506c: 40 81 00 08 ble 5074 <perf_copy_attr+0x2cc>
5070: 3d 00 b0 00 lis r8,-20480
5074: 39 28 ff ff addi r9,r8,-1
5078: 57 aa 00 06 rlwinm r10,r29,0,0,3
507c: 55 29 27 3e rlwinm r9,r9,4,28,31
5080: 39 29 00 01 addi r9,r9,1
5084: 7d 29 53 78 or r9,r9,r10
5088: 91 22 04 dc stw r9,1244(r2)
508c: 7d 20 ed 26 mfsrin r9,r29
5090: 55 29 00 80 rlwinm r9,r9,0,2,0
5094: 7c 08 50 40 cmplw r8,r10
5098: 40 81 00 c0 ble 5158 <perf_copy_attr+0x3b0>
509c: 7d 46 50 f8 not r6,r10
50a0: 7c c6 42 14 add r6,r6,r8
50a4: 54 c6 27 be rlwinm r6,r6,4,30,31
50a8: 7d 20 51 e4 mtsrin r9,r10
50ac: 3c ea 10 00 addis r7,r10,4096
50b0: 39 29 01 11 addi r9,r9,273
50b4: 7f 88 38 40 cmplw cr7,r8,r7
50b8: 55 29 02 06 rlwinm r9,r9,0,8,3
50bc: 40 9d 00 9c ble cr7,5158 <perf_copy_attr+0x3b0>
50c0: 2f 86 00 00 cmpwi cr7,r6,0
50c4: 41 9e 00 4c beq cr7,5110 <perf_copy_attr+0x368>
50c8: 2f 86 00 01 cmpwi cr7,r6,1
50cc: 41 9e 00 2c beq cr7,50f8 <perf_copy_attr+0x350>
50d0: 2f 86 00 02 cmpwi cr7,r6,2
50d4: 41 9e 00 14 beq cr7,50e8 <perf_copy_attr+0x340>
50d8: 7d 20 39 e4 mtsrin r9,r7
50dc: 39 29 01 11 addi r9,r9,273
50e0: 3c e7 10 00 addis r7,r7,4096
50e4: 55 29 02 06 rlwinm r9,r9,0,8,3
50e8: 7d 20 39 e4 mtsrin r9,r7
50ec: 39 29 01 11 addi r9,r9,273
50f0: 3c e7 10 00 addis r7,r7,4096
50f4: 55 29 02 06 rlwinm r9,r9,0,8,3
50f8: 7d 20 39 e4 mtsrin r9,r7
50fc: 3c e7 10 00 addis r7,r7,4096
5100: 39 29 01 11 addi r9,r9,273
5104: 7f 88 38 40 cmplw cr7,r8,r7
5108: 55 29 02 06 rlwinm r9,r9,0,8,3
510c: 40 9d 00 4c ble cr7,5158 <perf_copy_attr+0x3b0>
5110: 7d 20 39 e4 mtsrin r9,r7
5114: 39 29 01 11 addi r9,r9,273
5118: 3c c7 10 00 addis r6,r7,4096
511c: 55 29 02 06 rlwinm r9,r9,0,8,3
5120: 7d 20 31 e4 mtsrin r9,r6
5124: 39 29 01 11 addi r9,r9,273
5128: 3c c6 10 00 addis r6,r6,4096
512c: 55 29 02 06 rlwinm r9,r9,0,8,3
5130: 7d 20 31 e4 mtsrin r9,r6
5134: 39 29 01 11 addi r9,r9,273
5138: 3c c7 30 00 addis r6,r7,12288
513c: 55 29 02 06 rlwinm r9,r9,0,8,3
5140: 7d 20 31 e4 mtsrin r9,r6
5144: 3c e7 40 00 addis r7,r7,16384
5148: 39 29 01 11 addi r9,r9,273
514c: 7f 88 38 40 cmplw cr7,r8,r7
5150: 55 29 02 06 rlwinm r9,r9,0,8,3
5154: 41 9d ff bc bgt cr7,5110 <perf_copy_attr+0x368>
5158: 4c 00 01 2c isync
515c: 39 20 00 80 li r9,128
5160: 91 3d 00 00 stw r9,0(r29)
5164: 38 e0 00 00 li r7,0
5168: 90 e2 04 dc stw r7,1244(r2)
516c: 7d 20 ed 26 mfsrin r9,r29
5170: 65 29 40 00 oris r9,r9,16384
5174: 40 81 00 c0 ble 5234 <perf_copy_attr+0x48c>
5178: 7d 47 50 f8 not r7,r10
517c: 7c e7 42 14 add r7,r7,r8
5180: 54 e7 27 be rlwinm r7,r7,4,30,31
5184: 7d 20 51 e4 mtsrin r9,r10
5188: 3d 4a 10 00 addis r10,r10,4096
518c: 39 29 01 11 addi r9,r9,273
5190: 7c 08 50 40 cmplw r8,r10
5194: 55 29 02 06 rlwinm r9,r9,0,8,3
5198: 40 81 00 9c ble 5234 <perf_copy_attr+0x48c>
519c: 2c 07 00 00 cmpwi r7,0
51a0: 41 82 00 4c beq 51ec <perf_copy_attr+0x444>
51a4: 2c 07 00 01 cmpwi r7,1
51a8: 41 82 00 2c beq 51d4 <perf_copy_attr+0x42c>
51ac: 2c 07 00 02 cmpwi r7,2
51b0: 41 82 00 14 beq 51c4 <perf_copy_attr+0x41c>
51b4: 7d 20 51 e4 mtsrin r9,r10
51b8: 39 29 01 11 addi r9,r9,273
51bc: 3d 4a 10 00 addis r10,r10,4096
51c0: 55 29 02 06 rlwinm r9,r9,0,8,3
51c4: 7d 20 51 e4 mtsrin r9,r10
51c8: 39 29 01 11 addi r9,r9,273
51cc: 3d 4a 10 00 addis r10,r10,4096
51d0: 55 29 02 06 rlwinm r9,r9,0,8,3
51d4: 7d 20 51 e4 mtsrin r9,r10
51d8: 3d 4a 10 00 addis r10,r10,4096
51dc: 39 29 01 11 addi r9,r9,273
51e0: 7c 08 50 40 cmplw r8,r10
51e4: 55 29 02 06 rlwinm r9,r9,0,8,3
51e8: 40 81 00 4c ble 5234 <perf_copy_attr+0x48c>
51ec: 7d 20 51 e4 mtsrin r9,r10
51f0: 39 29 01 11 addi r9,r9,273
51f4: 3c ea 10 00 addis r7,r10,4096
51f8: 55 29 02 06 rlwinm r9,r9,0,8,3
51fc: 7d 20 39 e4 mtsrin r9,r7
5200: 39 29 01 11 addi r9,r9,273
5204: 3c e7 10 00 addis r7,r7,4096
5208: 55 29 02 06 rlwinm r9,r9,0,8,3
520c: 7d 20 39 e4 mtsrin r9,r7
5210: 39 29 01 11 addi r9,r9,273
5214: 3c ea 30 00 addis r7,r10,12288
5218: 55 29 02 06 rlwinm r9,r9,0,8,3
521c: 7d 20 39 e4 mtsrin r9,r7
5220: 3d 4a 40 00 addis r10,r10,16384
5224: 39 29 01 11 addi r9,r9,273
5228: 7c 08 50 40 cmplw r8,r10
522c: 55 29 02 06 rlwinm r9,r9,0,8,3
5230: 41 81 ff bc bgt 51ec <perf_copy_attr+0x444>
5234: 4c 00 01 2c isync
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Export the ool handlers to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9121f96a7c4302946839a0771f5d1daeeb6968c.1622708530.git.christophe.leroy@csgroup.eu
|
|
PPC64 uses MMU features to enable/disable KUAP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUAP related actions are in C following the
conversion of KUAP initial setup and context switch in C,
static branches can be used to enable/disable KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Export disable_kuap_key to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cd79e8008455fba5395d099f9bb1305c039b931c.1622708530.git.christophe.leroy@csgroup.eu
|
|
PPC64 uses MMU features to enable/disable KUEP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUEP related actions are in C following the
conversion of KUEP initial setup and context switch in C,
static branches can be used to enable/disable KUEP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7745a2c3a08ec46302920a3f48d1cb9b5469dbbb.1622708530.git.christophe.leroy@csgroup.eu
|
|
In order to selectively activate KUAP and KUEP in a following patch,
perform KUAP and KUEP initialisation in C.
Unlike PPC64, PPC32 doesn't have an early_setup_secondary(),
so do it in start_secondary().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/87be72023448dd4e476744ed279b8c04b8d08a1c.1622708530.git.christophe.leroy@csgroup.eu
|
|
switch_mmu_context() does things that can easily be done in C.
For updating user segments, we have update_user_segments().
As mentionned in commit b5efec00b671 ("powerpc/32s: Move KUEP
locking/unlocking in C"), update_user_segments() has the loop
unrolled which is a significant performance gain.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05c0875ad8220c03452c3a334946e207c6ca04d6.1622708530.git.christophe.leroy@csgroup.eu
|
|
In order to reuse it in switch_mmu_context(), this
patch moves CTX_TO_VSID() macro into asm/book3s/32/mmu-hash.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/26b36ef2939234a04b37baf6ffe50cba81f5d1b7.1622708530.git.christophe.leroy@csgroup.eu
|
|
KUEP implements the update of user segment registers.
Move it into mmu-hash.h in order to use it from other places.
And inline kuep_lock() and kuep_unlock(). Inlining kuep_lock() is
important for system_call_exception(), otherwise system_call_exception()
has to save into stack the system call parameters that are used just
after, and doing that takes more instructions than kuep_lock() itself.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24591ca480d14a62ef910e38a5273d551262c4a2.1622708530.git.christophe.leroy@csgroup.eu
|
|
Avoids the #ifdef in mmu.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0b7a13d414837e58264edc336b89c2fe9f35f9bc.1622708530.git.christophe.leroy@csgroup.eu
|
|
On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.
In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu
|
|
This can be done in C, do it.
Unrolling the loop gains approx. 15% performance.
From now on, prepare_transfer_to_handler() is only for
interrupts from kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4eadd873927e9a73c3d1dfe2f9497353465514cf.1615552867.git.christophe.leroy@csgroup.eu
|
|
If the code can use a stack in vm area, it can also use a
stack in linear space.
Simplify code by removing old non VMAP stack code on PPC32.
That means the data translation is now re-enabled early in
exception prolog in all cases, not only when using VMAP stacks.
While we are touching EXCEPTION_PROLOG macros, remove the
unused for_rtas parameter in EXCEPTION_PROLOG_1.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7cd6440c60a7e8f4f035b245c57720f51e225aae.1615552866.git.christophe.leroy@csgroup.eu
|
|
Add architecture specific implementation details for KFENCE and enable
KFENCE for the ppc32 architecture. In particular, this implements the
required interface in <asm/kfence.h>.
KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the Read/Write linear map to be
mapped at page granularity.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8dfe1bd2abde26337c1d8c1ad0acfcc82185e0d5.1614868445.git.christophe.leroy@csgroup.eu
|
|
Function names should tell what the function does, not how.
mfsrin() and mtsrin() are read/writing segment registers.
They are called that way because they are using mfsrin and mtsrin
instructions, but it doesn't matter for the caller.
In preparation of following patch, change their name to mfsr() and mtsr()
in order to make it obvious they manipulate segment registers without
messing up with how they do it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f92d99f4349391b77766745900231aa880a0efb5.1612612022.git.christophe.leroy@csgroup.eu
|
|
It is now possible to only build book3s/32 kernel for
CPUs without hash table.
Opt out hash related code when CONFIG_PPC_BOOK3S_604 is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62df436454ef06e104cc334a0859a2878d7888d5.1608274548.git.christophe.leroy@csgroup.eu
|
|
PTE_FLAGS_OFFSET is defined in asm/page_32.h and used only
in hash_low.S
And PTE_FLAGS_OFFSET nullity depends on CONFIG_PTE_64BIT
Instead of tests like #if (PTE_FLAGS_OFFSET != 0), use
CONFIG_PTE_64BIT related code.
Also move the definition of PTE_FLAGS_OFFSET into hash_low.S
directly, that improves readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f5bc21db7a33dab55924734e6060c2e9daed562e.1606247495.git.christophe.leroy@csgroup.eu
|
|
VSID is only for create_hpte(). When _PAGE_HASHPTE is
already set, add_hash_page() bails out without calling
create_hpte() and doesn't need the value of VSID.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3907199974c89b85a3441cf3f528751173b7649c.1606247495.git.christophe.leroy@csgroup.eu
|
|
primary_pteg_full and htab_hash_searches are not used.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6470ab99e58c84a5445af43ce4d1d772b0dc3e93.1606247495.git.christophe.leroy@csgroup.eu
|
|
On hash 32 bits, handling minor protection faults like unsetting
dirty flag is heavy if done from the normal page_fault processing,
because it implies hash table software lookup for flushing the entry
and then a DSI is taken anyway to add the entry back.
When KUAP was implemented, as explained in commit a68c31fc01ef
("powerpc/32s: Implement Kernel Userspace Access Protection"),
protection faults has been diverted from hash_page() because
hash_page() was not able to identify a KUAP fault.
Implement KUAP verification in hash_page(), by clearing write
permission when the access is a kernel access and Ks is 1.
This works regardless of the address because kernel segments always
have Ks set to 0 while user segments have Ks set to 0 only
when kernel write to userspace is granted.
Then protection faults can be handled by hash_page() even for KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8a4ffe4798e9ea32aaaccdf85e411bb1beed3500.1605542955.git.christophe.leroy@csgroup.eu
|
|
early_mmu_init() is independent of MMU type and not
directly linked to tlb handling.
In a following patch, tlb.c will be restricted to HASH mmu.
Move early_mmu_init() into mmu.c which is common.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e51b5e2fe6bca623b33116403043d3a1b5eaf826.1603348103.git.christophe.leroy@csgroup.eu
|
|
flush_hash_entry() is a simple function calling
flush_hash_pages() if it's a hash MMU or doing nothing otherwise.
Inline it.
And use it also in __ptep_test_and_clear_young().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9af895be7d4b404d40e749a2659552fd138e62c4.1603348103.git.christophe.leroy@csgroup.eu
|
|
On book3s/32, tlb_flush() does nothing when the CPU has a hash table,
it calls _tlbia() otherwise.
Inline it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ebc933d1c530a19ef3cf7983f6ae94814f6e92ac.1603348103.git.christophe.leroy@csgroup.eu
|
|
flush_range() handle both the MMU_FTR_HPTE_TABLE case and
the other case.
The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call
to _tlbie()/_tlbia() which is not worth a dedicated function.
Make flush_range() a hash specific and call it from tlbflush.h based
on mmu_has_feature(MMU_FTR_HPTE_TABLE).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/132ab19aae52abc8e06ab524ec86d4229b5b9c3d.1603348103.git.christophe.leroy@csgroup.eu
|
|
flush_tlb_range() and flush_tlb_kernel_range() are trivial calls to
flush_range().
Make flush_range() global and inline flush_tlb_range()
and flush_tlb_kernel_range().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c7029a78e78709ad9272d7a44260e06b649169b2.1603348103.git.christophe.leroy@csgroup.eu
|