summaryrefslogtreecommitdiff
path: root/arch/powerpc/xmon
AgeCommit message (Collapse)AuthorFilesLines
2024-07-11powerpc/xmon: Fix disassembly CPU feature checksMichael Ellerman1-22/+11
In the xmon disassembly code there are several CPU feature checks to determine what dialects should be passed to the disassembler. The dialect controls which instructions the disassembler will recognise. Unfortunately the checks are incorrect, because instead of passing a single CPU feature they are passing a mask of feature bits. For example the code: if (cpu_has_feature(CPU_FTRS_POWER5)) dialect |= PPC_OPCODE_POWER5; Is trying to check if the system is running on a Power5 CPU. But CPU_FTRS_POWER5 is a mask of *all* the feature bits that are enabled on a Power5. In practice the test will always return true for any 64-bit CPU, because at least one bit in the mask will be present in the CPU_FTRS_ALWAYS mask. Similarly for all the other checks against CPU_FTRS_xx masks. Rather than trying to match the disassembly behaviour exactly to the current CPU, just differentiate between 32-bit and 64-bit, and Altivec, VSX and HTM. That will cause some instructions to be shown in disassembly even on a CPU that doesn't support them, but that's OK, objdump -d output has the same behaviour, and if anything it's less confusing than some instructions not being disassembled. Fixes: 897f112bb42e ("[POWERPC] Import updated version of ppc disassembly code for xmon") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240509121248.270878-2-mpe@ellerman.id.au
2024-05-07powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"Greg Kurz1-3/+3
All these commands end up peeking into the PACA using the user originated cpu id as an index. Check the cpu id is valid in order to prevent xmon to crash. Instead of printing an error, this follows the same behavior as the "lp s #" command : ignore the buggy cpu id parameter and fall back to the #-less version of the command. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/161531347060.252863.10490063933688958044.stgit@bahia.lan
2024-05-07powerpc/Makefile: Remove bits related to the previous use of -mcmodel=largeNaveen N Rao1-2/+0
All supported compilers today (gcc v5.1+ and clang v11+) have support for -mcmodel=medium. As such, NO_MINIMAL_TOC is no longer being set. Remove NO_MINIMAL_TOC as well as the fallback to -mminimal-toc. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240110141237.3179199-1-naveen@kernel.org
2024-03-16Merge tag 'powerpc-6.9-1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use by glibc - Add support for recognising the Power11 architected and raw PVRs - Add support for nr_cpus=n on the command line where the boot CPU is >= n - Add ppcxx_allmodconfig targets for all 32-bit sub-arches - Other small features, cleanups and fixes Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan, Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor, Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B. Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe Kleine-König, Vaibhav Jain, and Wen Xiong. * tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits) powerpc/macio: Make remove callback of macio driver void returned powerpc/83xx: Fix build failure with FPU=n powerpc/64s: Fix get_hugepd_cache_index() build failure powerpc/4xx: Fix warp_gpio_leds build failure powerpc/amigaone: Make several functions static powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. macintosh/adb: make adb_dev_class constant powerpc: xor_vmx: Add '-mhard-float' to CFLAGS powerpc/fsl: Fix mfpmr() asm constraint error powerpc: Remove cpu-as-y completely powerpc/fsl: Modernise mt/mfpmr powerpc/fsl: Fix mfpmr build errors with newer binutils powerpc/64s: Use .machine power4 around dcbt powerpc/64s: Move dcbt/dcbtst sequence into a macro powerpc/mm: Code cleanup for __hash_page_thp powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks powerpc/irq: Allow softirq to hardirq stack transition powerpc: Stop using of_root powerpc/machdep: Define 'compatibles' property in ppc_md and use it of: Reimplement of_machine_is_compatible() using of_machine_compatible_match() ...
2024-03-07mm/powerpc: replace pXd_is_leaf() with pXd_leaf()Peter Xu1-3/+3
They're the same macros underneath. Drop pXd_is_leaf(), instead always use pXd_leaf(). At the meantime, instead of renames, drop the pXd_is_leaf() fallback definitions directly in arch/powerpc/include/asm/pgtable.h. because similar fallback macros for pXd_leaf() are already defined in include/linux/pgtable.h. Link: https://lkml.kernel.org/r/20240305043750.93762-3-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Muchun Song <muchun.song@linux.dev> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22powerpc: Use user_mode() macro when possibleChristophe Leroy1-2/+2
There is a nice macro to check user mode. Use it instead of open coding anding with MSR_PR to increase readability and avoid having to comment what that anding is for. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/fbf74887dcf1f1ba9e1680fc3247cbb581b00662.1708078228.git.christophe.leroy@csgroup.eu
2024-02-21powerpc: Remove duplicate/unnecessary ifdefsShrikanth Hegde1-2/+0
When an ifdef is used in the below manner, second one could be considered as duplicate. ifdef DEFINE_A ...code block... ifdef DEFINE_A <-- This is a duplicate. ...code block... endif else ifndef DEFINE_A <-- This is also duplicate. ...code block... endif endif More details about the script and methods used to find these code patterns are in cover letter of [1]. Few places in arch/powerpc where this pattern was seen: paca.h: Hunk1: Code is under check of CONFIG_PPC64 from line 13, hence the second CONFIG_PPC64 at line 166 is a duplicate. Hunk2: CONFIG_PPC_BOOK3S_64 was defined back to back. Merged the two ifdefs. asm-offsets.c: Code is under check of CONFIG_PPC64 from line 176 hence second CONFIG_PPC64 at line 249 is a duplicate. powermac/feature.c: #ifndef CONFIG_PPC64 is used at line 2066. And then in #else again #ifdef CONFIG_PPC64 is used. Which is a duplicate since in #else means CONFIG_PPC64 is defined. xmon.c: Code is under the check of CONFIG_SMP from line 521 hence the same check of CONFIG_SMP at line 646 is a duplicate. No functional change is intended here. It only aims to improve code readability. [1] https://lore.kernel.org/all/20240118080326.13137-1-sshegde@linux.ibm.com/ Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240216053016.528906-1-sshegde@linux.ibm.com
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-08-31Merge tag 'powerpc-6.6-1' of ↵Linus Torvalds2-13/+8
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the configured SMT state when hotplugging CPUs into the system - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix MMU to avoid a broadcast TLBIE flush on exit - Drop the exclusion between ptrace/perf watchpoints, and drop the now unused associated arch hooks - Add support for the "nohlt" command line option to disable CPU idle - Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1 - Rework memory block size determination, and support 256MB size on systems with GPUs that have hotpluggable memory - Various other small features and fixes Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai. * tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits) macintosh/ams: linux/platform_device.h is needed powerpc/xmon: Reapply "Relax frame size for clang" powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled powerpc/iommu: Fix notifiers being shared by PCI and VIO buses powerpc/mpc5xxx: Add missing fwnode_handle_put() powerpc/config: Disable SLAB_DEBUG_ON in skiroot powerpc/pseries: Remove unused hcall tracing instruction powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n powerpc: dts: add missing space before { powerpc/eeh: Use pci_dev_id() to simplify the code powerpc/64s: Move CPU -mtune options into Kconfig powerpc/powermac: Fix unused function warning powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT powerpc: Don't include lppaca.h in paca.h powerpc/pseries: Move hcall_vphn() prototype into vphn.h powerpc/pseries: Move VPHN constants into vphn.h cxl: Drop unused detach_spa() powerpc: Drop zalloc_maybe_bootmem() powerpc/powernv: Use struct opal_prd_msg in more places ...
2023-08-29powerpc/xmon: Reapply "Relax frame size for clang"Nick Desaulniers1-0/+4
This is a manual revert of commit 7f3c5d099b6f ("Revert "powerpc/xmon: Relax frame size for clang"") but using ccflags-$(CONFIG_CC_IS_CLANG) which is shorter. Turns out that this is reproducible still under specific compiler versions (mea culpa: I did not test every supported version of clang), and even a few randconfigs bots found. We'll have to revisit this again in the future, for now back this out. Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/252#issuecomment-1690371256 Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/llvm/202308260344.Vc4Giuk7-lkp@intel.com/ Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230828-ppc_rerevert-v2-1-46b71a3656c6@google.com
2023-08-24powerpc: Don't include lppaca.h in paca.hMichael Ellerman1-0/+1
By adding a forward declaration for struct lppaca we can untangle paca.h and lppaca.h. Also move get_lppaca() into lppaca.h for consistency. Add includes of lppaca.h to some files that need it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230823055317.751786-3-mpe@ellerman.id.au
2023-08-18mm: remove arguments of show_mem()Kefeng Wang1-1/+1
All callers of show_mem() pass 0 and NULL, so we can remove the two arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in show_mem(). Link: https://lkml.kernel.org/r/20230630062253.189440-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18Revert "powerpc/xmon: Relax frame size for clang"Nick Desaulniers1-6/+0
This reverts commit 9c87156cce5a63735d1218f0096a65c50a7a32aa. I have not been able to reproduce the reported -Wframe-larger-than= warning (or disassembly) with clang-11 or clang-18. I don't know precisely when this was fixed in llvm, but it may be time to revert this. Closes: https://github.com/ClangBuiltLinux/linux/issues/252 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230817-ppc_xmon-v1-1-8cc2d51b9995@google.com
2023-08-14powerpc: xmon: remove unused variablesArnd Bergmann1-6/+2
Randconfig testing with W=1 showed up these warnings that I'd like to enable by default: arch/powerpc/xmon/xmon.c: In function 'dump_tlb_book3e': arch/powerpc/xmon/xmon.c:3833:42: error: variable 'lrat' set but not used [-Werror=unused-but-set-variable] 3833 | int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0; | ^~~~ arch/powerpc/xmon/xmon.c:3831:23: error: variable 'lpidmask' set but not used [-Werror=unused-but-set-variable] 3831 | u32 mmucfg, pidmask, lpidmask; | ^~~~~~~~ arch/powerpc/xmon/xmon.c:3831:14: error: variable 'pidmask' set but not used [-Werror=unused-but-set-variable] 3831 | u32 mmucfg, pidmask, lpidmask; | ^~~~~~~ Just remove these as they have been unused since the code was added in 2010. Fixes: 03247157f7391 ("powerpc/book3e: Add TLB dump in xmon for Book3E") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230809131024.2039647-2-arnd@kernel.org
2023-08-14powerpc: mark more local variables as volatileArnd Bergmann1-1/+1
A while ago I created a2305e3de8193 ("powerpc: mark local variables around longjmp as volatile") in order to allow building powerpc with -Wextra enabled on gcc-11. I tried this again with gcc-13 and found two more of the same issues, presumably based on slightly different optimization paths being taken here: arch/powerpc/xmon/xmon.c:3306:27: error: variable 'mm' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/kexec/crash.c:353:22: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] I checked a bunch of randconfigs and found only these two, so just address them the same way as the others. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230809131024.2039647-1-arnd@kernel.org
2023-07-25tty: sysrq: switch sysrq handlers from int to u8Jiri Slaby1-1/+1
The passed parameter to sysrq handlers is a key (a character). So change the type from 'int' to 'u8'. Let it specifically be 'u8' for two reasons: * unsigned: unsigned values come from the upper layers (devices) and the tty layer assumes unsigned on most places, and * 8-bit: as that what's supposed to be one day in all the layers built on the top of tty. (Currently, we use mostly 'unsigned char' and somewhere still only 'char'. (But that also translates to the former thanks to -funsigned-char.)) Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Zqiang <qiang.zhang1211@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> # DRM Acked-by: WANG Xuerui <git@xen0n.name> # loongarch Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20230712081811.29004-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28Merge tag 'mm-stable-2023-06-24-19-15' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ...
2023-06-20powerpc: allow pte_offset_map[_lock]() to failHugh Dickins1-1/+4
In rare transient cases, not yet made possible, pte_offset_map() and pte_offset_map_lock() may not find a page table: handle appropriately. Balance successful pte_offset_map() with pte_unmap() where omitted. Link: https://lkml.kernel.org/r/54c8b578-ca9-a0f-bfd2-d72976f8d73a@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: John David Anglin <dave.anglin@bell.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-30powerpc/xmon: Use KSYM_NAME_LEN in array sizeManinder Singh1-1/+1
kallsyms_lookup() which in turn calls kallsyms_lookup_buildid() writes to index "KSYM_NAME_LEN - 1". Thus the array passed as namebuf to kallsyms_lookup() should be KSYM_NAME_LEN in size. In xmon.c the array was defined to be "128" bytes directly, without using KSYM_NAME_LEN. Commit b8a94bfb3395 ("kallsyms: increase maximum kernel symbol length to 512") changed the value to 512, but missed updating the xmon code. Fixes: b8a94bfb3395 ("kallsyms: increase maximum kernel symbol length to 512") Cc: stable@vger.kernel.org # v6.1+ Co-developed-by: Onkarnath <onkarnath.1@samsung.com> Signed-off-by: Onkarnath <onkarnath.1@samsung.com> Signed-off-by: Maninder Singh <maninder1.s@samsung.com> [mpe: Tweak change log wording and fix commit reference] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230529111337.352990-2-maninder1.s@samsung.com
2023-04-20powerpc/64: vmlinux support building with PCREL addresingNicholas Piggin1-0/+2
PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
2023-03-06cpumask: fix incorrect cpumask scanning result checksLinus Torvalds1-1/+1
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") exposed a number of cases of drivers not checking the result of "cpumask_next()" and friends correctly. The documented correct check for "no more cpus in the cpumask" is to check for the result being equal or larger than the number of possible CPU ids, exactly _because_ we've always done those constant-sized cpumask scans using a widened type before. So the return value of a cpumask scan should be checked with if (cpu >= nr_cpu_ids) ... because the cpumask scan did not necessarily stop exactly *at* that maximum CPU id. But a few cases ended up instead using checks like if (cpu == nr_cpumask_bits) ... which used that internal "widened" number of bits. And that used to work pretty much by accident (ok, in this case "by accident" is simply because it matched the historical internal implementation of the cpumask scanning, so it was more of a "intentionally using implementation details rather than an accident"). But the extended constant-sized optimizations then did that internal implementation differently, and now that code that did things wrong but matched the old implementation no longer worked at all. Which then causes subsequent odd problems due to using what ends up being an invalid CPU ID. Most of these cases require either unusual hardware or special uses to hit, but the random.c one triggers quite easily. All you really need is to have a sufficiently small CONFIG_NR_CPUS value for the bit scanning optimization to be triggered, but not enough CPUs to then actually fill that widened cpumask. At that point, the cpumask scanning will return the NR_CPUS constant, which is _not_ the same as nr_cpumask_bits. This just does the mindless fix with sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/' to fix the incorrect uses. The ones in the SCSI lpfc driver in particular could probably be fixed more cleanly by just removing that repeated pattern entirely, but I am not emptionally invested enough in that driver to care. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/ Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/ Reported-by: Vernon Yang <vernon2gm@gmail.com> Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/ Cc: Yury Norov <yury.norov@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-13powerpc/rtas: arch-wide function token lookup conversionsNathan Lynch1-13/+3
With the tokens for all implemented RTAS functions now available via rtas_function_token(), which is optimal and safe for arbitrary contexts, there is no need to use rtas_token() or cache its result. Most conversions are trivial, but a few are worth describing in more detail: * Error injection token comparisons for lockdown purposes are consolidated into a simple predicate: token_is_restricted_errinjct(). * A couple of special cases in block_rtas_call() do not use rtas_token() but perform string comparisons against names in the function table. These are converted to compare against token values instead, which is logically equivalent but less expensive. * The lookup for the ibm,os-term token can be deferred until needed, instead of caching it at boot to avoid device tree traversal during panic. * Since rtas_function_token() accesses a read-only data structure without taking any locks, xmon's lookup of set-indicator can be performed as needed instead of cached at startup. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-20-26929c8cce78@linux.ibm.com
2023-02-10powerpc/kcsan: Add exclusions from instrumentationRohan McLure1-0/+1
Exclude various incompatible compilation units from KCSAN instrumentation. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230206021801.105268-2-rmclure@linux.ibm.com
2022-12-02powerpc: Rename STACK_FRAME_MARKER and derive it from frame offsetNicholas Piggin1-2/+1
This is a count of longs from the stack pointer to the regs marker. Rename it to make it more distinct from the other byte offsets. It can be derived from the byte offset definitions just added. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-10-npiggin@gmail.com
2022-12-02powerpc: add definition for pt_regs offset within an interrupt frameNicholas Piggin1-4/+3
This is a common offset that currently uses the overloaded STACK_FRAME_OVERHEAD constant. It's easier to read and more flexible to use a specific regs offset for this. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com
2022-11-24powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmdsGustavo A. R. Silva1-3/+4
When building with automatic stack variable initialization, GCC 12 complains about variables defined outside of switch case statements. Move the variable into the case that uses it, which silences the warning: arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’: arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable] 1529 | int mode; | ^~~~ Fixes: 09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
2022-09-28powerpc/64: asm use consistent global variable declaration and accessNicholas Piggin1-2/+2
Use helper macros to access global variables, and place them in .data sections rather than in .toc. Putting addresses in TOC is not required because the kernel is linked with a single TOC. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220926034057.2360083-3-npiggin@gmail.com
2022-09-26powerpc: Simplify redundant Kconfig testsChristophe Leroy1-1/+1
PPC_85xx implies PPC32 so no need to check PPC32 in addition. PPC64 && !PPC_BOOK3E_64 means PPC_BOOK3S_64. PPC_BOOK3E_64 implies PPC_E500. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/244cce3e603f2b79796314c0c1c46cab927b9adc.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_PPC_BOOK3EChristophe Leroy1-8/+8
CONFIG_PPC_BOOK3E is redundant with CONFIG_PPC_BOOK3E_64. The later is more explicit about the fact that it's a 64 bits target. Remove CONFIG_PPC_BOOK3E. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5d0891490813c19cdcfc04678f512ea68cba3e64.1663606876.git.christophe.leroy@csgroup.eu
2022-09-15powerpc/xmon: remove unused ppc_parse_cpu() declarationGaosheng Cui1-2/+0
ppc_parse_cpu() has been removed since commit 5b102782c7f4 ("powerpc/xmon: Enable disassembly files (compilation changes)"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220913075029.682327-2-cuigaosheng1@huawei.com
2022-07-27powerpc/ppc-opcode: Define and use PPC_RAW_TRAP() and PPC_RAW_TW()Christophe Leroy1-1/+1
Add and use PPC_RAW_TRAP() instead of opencoding. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/52c7e522e56a38e3ff0363906919445920005a8f.1657205708.git.christophe.leroy@csgroup.eu
2022-06-29powerpc/64: Drop ppc_inst_as_str()Michael Ellerman1-1/+1
The ppc_inst_as_str() macro tries to make printing variable length, aka "prefixed", instructions convenient. It mostly succeeds, but it does hide an on-stack buffer, which triggers stack protector. More problematically it doesn't compile at all with GCC 12, with -Wdangling-pointer, due to the fact that it returns the char buffer declared inside the macro: arch/powerpc/kernel/trace/ftrace.c: In function '__ftrace_modify_call': ./include/linux/printk.h:475:44: error: using a dangling pointer to '__str' [-Werror=dangling-pointer=] 475 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__) ... arch/powerpc/kernel/trace/ftrace.c:567:17: note: in expansion of macro 'pr_err' 567 | pr_err("Not expected bl: opcode is %s\n", ppc_inst_as_str(op)); | ^~~~~~ ./arch/powerpc/include/asm/inst.h:156:14: note: '__str' declared here 156 | char __str[PPC_INST_STR_LEN]; \ | ^~~~~ This could be fixed by having the caller declare the buffer, but in some places there'd need to be two buffers. In all cases where ppc_inst_as_str() is used the output is not really meant for user consumption, it's almost always indicative of a kernel bug. A simpler solution is to just print the value as an unsigned long. For normal instructions the output is identical. For prefixed instructions the value is printed as a single 64-bit quantity, whereas previously the low half was printed first. But that is good enough for debug output, especially as prefixed instructions will be rare in kernel code in practice. Old: c000000000111170 60420000 ori r2,r2,0 c000000000111174 04100001 e580fb00 .long 0xe580fb0004100001 New: c00000000010f90c 60420000 ori r2,r2,0 c00000000010f910 e580fb0004100001 .long 0xe580fb0004100001 Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Reported-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20220531065936.3674348-1-mpe@ellerman.id.au
2022-05-30Merge tag 'pm-5.19-rc1-2' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update the ARM cpufreq drivers and fix up the CPPC cpufreq driver after recent changes, update the OPP code and PM documentation and add power sequences support to the system reboot and power off code. Specifics: - Add Tegra234 cpufreq support (Sumit Gupta) - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing, Rex-BC Chen, and Jia-Wei Chang) - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin, Pierre Gondois) - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana) - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel) - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski) - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter) - Cleanups (Krzysztof Kozlowski, and Viresh Kumar) - Add Out of Band mode description to the intel-speed-select utility documentation (Srinivas Pandruvada) - Add power sequences support to the system reboot and power off code and make related platform-specific changes for multiple platforms (Dmitry Osipenko, Geert Uytterhoeven)" * tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits) cpufreq: CPPC: Fix unused-function warning cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE Documentation: admin-guide: PM: Add Out of Band mode kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() ...
2022-05-22powerpc: Fix all occurences of "the the"Michael Ellerman1-1/+1
Rather than waiting for the bots to fix these one-by-one, fix all occurences of "the the" throughout arch/powerpc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au
2022-05-19powerpc: Use do_kernel_power_off()Dmitry Osipenko1-2/+1
Kernel now supports chained power-off handlers. Use do_kernel_power_off() that invokes chained power-off handlers. It also invokes legacy pm_power_off() for now, which will be removed once all drivers will be converted to the new sys-off API. Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy1-1/+0
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2022-05-05powerpc: Reject probes on instructions that can't be single steppedNaveen N. Rao1-6/+5
Per the ISA, a Trace interrupt is not generated for: - [h|u]rfi[d] - rfscv - sc, scv, and Trap instructions that trap - Power-Saving Mode instructions - other instructions that cause interrupts (other than Trace interrupts) - the first instructions of any interrupt handler (applies to Branch and Single Step tracing; CIABR matches may still occur) - instructions that are emulated by software Add a helper to check for instructions belonging to the first four categories above and to reject kprobes, uprobes and xmon breakpoints on such instructions. We reject probing on instructions belonging to these categories across all ISA versions and across both BookS and BookE. For trap instructions, we can't know in advance if they can cause a trap, and there is no good reason to allow probing on those. Also, uprobes already refuses to probe trap instructions and kprobes does not allow probes on trap instructions used for kernel warnings and bugs. As such, stop allowing any type of probes/breakpoints on trap instruction across uprobes, kprobes and xmon. For some of the fp/altivec instructions that can generate an interrupt and which we emulate in the kernel (altivec assist, for example), we check and turn off single stepping in emulate_single_step(). Instructions generating a DSI are restarted and single stepping normally completes once the instruction is completed. In uprobes, if a single stepped instruction results in a non-fatal signal to be delivered to the task, such signals are "delayed" until after the instruction completes. For fatal signals, single stepping is cancelled and the instruction restarted in-place so that core dump captures proper addresses. In kprobes, we do not allow probes on instructions having an extable entry and we also do not allow probing interrupt vectors. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f56ee979d50b8711fae350fc97870f3ca34acd75.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
2022-05-05powerpc: fix typos in commentsJulia Lawall2-2/+2
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
2022-01-06powerpc/xmon: Dump XIVE information for online-only processors.Sachin Sant1-2/+2
dxa command in XMON debugger iterates through all possible processors. As a result, empty lines are printed even for processors which are not online. CPU 47:pp=00 CPPR=ff IPI=0x0040002f PQ=-- EQ idx=699 T=0 00000000 00000000 CPU 48: CPU 49: Restrict XIVE information(dxa) to be displayed for online processors only. Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/164139226833.12930.272224382183014664.sendpatchset@MacBook-Pro.local
2021-12-23powerpc/xmon: Add __init attribute to eligible functionsNick Child1-1/+1
`xmon_register_spus` defined in 'arch/powerpc/xmon' is deserving of an `__init` macro attribute. This functions is only called by other initialization functions and therefore should inherit the attribute. Also, change the function declaration in the header file to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-7-nick.child@ibm.com
2021-12-09powerpc/inst: Define ppc_inst_tChristophe Leroy2-9/+9
In order to stop using 'struct ppc_inst' on PPC32, define a ppc_inst_t typedef. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fe5baa2c66fea9db05a8b300b3e8d2880a42596c.1638208156.git.christophe.leroy@csgroup.eu
2021-12-09powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMUNicholas Piggin1-3/+5
Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves 128kB kernel image size (90kB text) on powernv_defconfig minus KVM, 350kB on pseries_defconfig minus KVM, 40kB on a tiny config. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG. Fix radix_enabled() use in setup_initial_memory_limit(). Add some stubs to reduce number of ifdefs.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
2021-11-24powerpc/64s: guard optional TIDR SPR with CPU ftr testNicholas Piggin1-2/+8
The TIDR SPR only exists on POWER9. Avoid accessing it when the feature bit for it is not set. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211123095231.1036501-3-npiggin@gmail.com
2021-10-28powerpc/xmon: fix task state outputDenis Kirjanov1-2/+1
p_state is unsigned since the commit 2f064a59a11f The patch also uses TASK_RUNNING instead of null. Fixes: 2f064a59a11f ("sched: Change task_struct::state") Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211026133108.7113-1-kda@linux-powerpc.org
2021-08-26powerpc: Refactor verification of MSR_RIChristophe Leroy1-13/+3
40x and BOOKE don't have MSR_RI therefore all tests involving MSR_RI may be problematic on those plateforms. Create helpers to check or set MSR_RI in regs, and use them in common code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c2fb93708196734f4176dda334aaa3055f213b89.1629707037.git.christophe.leroy@csgroup.eu
2021-08-13powerpc: rename powerpc_debugfs_root to arch_debugfs_dirAneesh Kumar K.V1-3/+3
No functional change in this patch. arch_debugfs_dir is the generic kernel name declared in linux/debugfs.h for arch-specific debugfs directory. Architectures like x86/s390 already use the name. Rename powerpc specific powerpc_debugfs_root to arch_debugfs_dir. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132831.233794-2-aneesh.kumar@linux.ibm.com
2021-07-02Merge tag 'powerpc-5.14-1' of ↵Linus Torvalds1-46/+150
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ...
2021-06-25powerpc: mark local variables around longjmp as volatileArnd Bergmann1-11/+11
gcc-11 points out that modifying local variables next to a longjmp/setjmp may cause undefined behavior: arch/powerpc/kexec/crash.c: In function 'crash_kexec_prepare_cpus.constprop': arch/powerpc/kexec/crash.c:108:22: error: variable 'ncpus' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbere d] arch/powerpc/kexec/crash.c:109:13: error: variable 'tries' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbere d] arch/powerpc/xmon/xmon.c: In function 'xmon_print_symbol': arch/powerpc/xmon/xmon.c:3625:21: error: variable 'name' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c: In function 'stop_spus': arch/powerpc/xmon/xmon.c:4057:13: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c: In function 'restart_spus': arch/powerpc/xmon/xmon.c:4098:13: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c: In function 'dump_opal_msglog': arch/powerpc/xmon/xmon.c:3008:16: error: variable 'pos' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c: In function 'show_pte': arch/powerpc/xmon/xmon.c:3207:29: error: variable 'tsk' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c: In function 'show_tasks': arch/powerpc/xmon/xmon.c:3302:29: error: variable 'tsk' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c: In function 'xmon_core': arch/powerpc/xmon/xmon.c:494:13: error: variable 'cmd' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c:860:21: error: variable 'bp' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c:860:21: error: variable 'bp' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/xmon/xmon.c:492:48: error: argument 'fromipi' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] According to the documentation, marking these as 'volatile' is sufficient to avoid the problem, and it shuts up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210429080708.1520360-1-arnd@kernel.org
2021-06-25powerpc/xmon: Add support for running a command on all cpus in xmonNaveen N. Rao1-22/+126
It is sometimes desirable to run a command on all cpus in xmon. A typical scenario is to obtain the backtrace from all cpus in xmon if there is a soft lockup. Add rudimentary support for the same. The command to be run on all cpus should be prefixed with 'c#'. As an example, 'c#t' will run 't' command and produce a backtrace on all cpus in xmon. Since many xmon commands are not sensible for running in this manner, we only allow a predefined list of commands -- 'r', 'S' and 't' for now. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210601074801.617363-1-naveen.n.rao@linux.vnet.ibm.com
2021-06-24powerpc/64s: avoid reloading (H)SRR registers if they are still validNicholas Piggin1-7/+7
When an interrupt is taken, the SRR registers are set to return to where it left off. Unless they are modified in the meantime, or the return address or MSR are modified, there is no need to reload these registers when returning from interrupt. Introduce per-CPU flags that track the validity of SRR and HSRR registers. These are cleared when returning from interrupt, when using the registers for something else (e.g., OPAL calls), when adjusting the return address or MSR of a context, and when context switching (which changes the return address and MSR). This improves the performance of interrupt returns. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fold in fixup patch from Nick] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-19 08:08:37 +0300