summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2021-04-16riscv: keep interrupts disabled for BREAKPOINT exceptionJisheng Zhang1-0/+3
Current riscv's kprobe handlers are run with both preemption and interrupt enabled, this violates kprobe requirements. Fix this issue by keeping interrupts disabled for BREAKPOINT exception. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Palmer: add a comment] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-16riscv: kprobes/ftrace: Add recursion protection to the ftrace callbackJisheng Zhang1-1/+10
Currently, the riscv's kprobes(powerred by ftrace) handler is preemptible. Futher check indicates we miss something similar as the commit c536aa1c5b17 ("kprobes/ftrace: Add recursion protection to the ftrace callback"), so do similar modifications as the commit does. Fixes: 829adda597fe ("riscv: Add KPROBES_ON_FTRACE supported") Cc: stable@vger.kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-16riscv: add do_page_fault and do_trap_break into the kprobes blacklistJisheng Zhang2-0/+2
These two functions are used to implement the kprobes feature so they can't be kprobed. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-16riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"Kefeng Wang1-1/+1
There is a spelling mistake when SPARSEMEM Kconfig copy. Fixes: a5406a7ff56e ("riscv: Correct SPARSEMEM configuration") Cc: stable@vger.kernel.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-02riscv: Make NUMA depend on MMUKefeng Wang1-1/+1
NUMA is useless when NOMMU, and it leads some build error, make it depend on MMU. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-02riscv: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./arch/riscv/mm/kasan_init.c:219:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-02riscv,entry: fix misaligned base for excp_vect_tableZihao Yu1-0/+1
In RV64, the size of each entry in excp_vect_table is 8 bytes. If the base of the table is not 8-byte aligned, loading an entry in the table will raise a misaligned exception. Although such exception will be handled by opensbi/bbl, this still causes performance degradation. Signed-off-by: Zihao Yu <yuzihao@ict.ac.cn> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-02riscv: evaluate put_user() arg before enabling user accessBen Dooks1-2/+5
The <asm/uaccess.h> header has a problem with put_user(a, ptr) if the 'a' is not a simple variable, such as a function. This can lead to the compiler producing code as so: 1: enable_user_access() 2: evaluate 'a' into register 'r' 3: put 'r' to 'ptr' 4: disable_user_acess() The issue is that 'a' is now being evaluated with the user memory protections disabled. So we try and force the evaulation by assigning 'x' to __val at the start, and hoping the compiler barriers in enable_user_access() do the job of ordering step 2 before step 1. This has shown up in a bug where 'a' sleeps and thus schedules out and loses the SR_SUM flag. This isn't sufficient to fully fix, but should reduce the window of opportunity. The first instance of this we found is in scheudle_tail() where the code does: $ less -N kernel/sched/core.c 4263 if (current->set_child_tid) 4264 put_user(task_pid_vnr(current), current->set_child_tid); Here, the task_pid_vnr(current) is called within the block that has enabled the user memory access. This can be made worse with KASAN which makes task_pid_vnr() a rather large call with plenty of opportunity to sleep. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reported-by: syzbot+e74b94fe601ab9552d69@syzkaller.appspotmail.com Suggested-by: Arnd Bergman <arnd@arndb.de> -- Changes since v1: - fixed formatting and updated the patch description with more info Changes since v2: - fixed commenting on __put_user() (schwab@linux-m68k.org) Change since v3: - fixed RFC in patch title. Should be ready to merge. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-02riscv: Drop const annotation for spKefeng Wang1-1/+1
The const annotation should not be used for 'sp', or it will become read only and lead to bad stack output. Fixes: dec822771b01 ("riscv: stacktrace: Move register keyword to beginning of declaration") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: Correct SPARSEMEM configurationKefeng Wang1-2/+2
There are two issues for RV32, 1) if use FLATMEM, it is useless to enable SPARSEMEM_STATIC. 2) if use SPARSMEM, both SPARSEMEM_VMEMMAP and SPARSEMEM_STATIC is enabled. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17RISC-V: kasan: Declare kasan_shallow_populate() staticPalmer Dabbelt1-1/+1
Without this I get a missing prototype warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: Ensure page table writes are flushed when initializing KASAN vmallocAlexandre Ghiti1-0/+2
Make sure that writes to kernel page table during KASAN vmalloc initialization are made visible by adding a sfence.vma. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17RISC-V: Fix out-of-bounds accesses in init_resources()Geert Uytterhoeven1-1/+2
init_resources() allocates an array of resources, based on the current total number of memory regions and reserved memory regions. However, allocating this array using memblock_alloc() might increase the number of reserved memory regions. If that happens, populating the array later based on the new number of regions will cause out-of-bounds writes beyond the end of the allocated array. Fix this by allocating one more entry, which may or may not be used. Fixes: 797f0375dd2ef5cd ("RISC-V: Do not allocate memblock while iterating reserved memblocks") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: Fix compilation error with Canaan SoCDamien Le Moal1-0/+2
When CONFIG_SOC_CANAAN is selected, the K210 sysctl driver is always compiled. Since this driver early init function calls the function k210_clk_early_init() implemented by the K210 clk driver, this driver must also always be selected for compilation ot avoid build failures. Avoid such build failures by always selecting CONFIG_COMMON_CLK and CONFIG_COMMON_CLK_K210 when CONFIG_SOC_CANAAN is enabled. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Fixes: c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17ftrace: Fix spelling mistake "disabed" -> "disabled"Colin Ian King1-1/+1
There is a spelling mistake in a comment, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: fix bugon.cocci warningskernel test robot1-2/+1
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") CC: Guo Ren <guoren@linux.alibaba.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: process: Fix no prototype for arch_dup_task_structNanyong Sun1-0/+1
Fix the following W=1 compilation warning: arch/riscv/kernel/process.c:114:5: warning: no previous prototype for ‘arch_dup_task_struct’ [-Wmissing-prototypes] 114 | int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) | ^~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: ftrace: Use ftrace_get_regs helperNanyong Sun1-7/+9
Use ftrace_get_regs() helper call to get pt_regs from ftrace_regs struct, this makes the code simpler. Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: process: Fix no prototype for show_regsNanyong Sun1-0/+1
Include header file to fix the following W=1 compilation warning: arch/riscv/kernel/process.c:78:6: warning: no previous prototype for ‘show_regs’ [-Wmissing-prototypes] 78 | void show_regs(struct pt_regs *regs) | ^~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: syscall_table: Reduce W=1 compilation warnings noiseNanyong Sun1-0/+1
Building riscv syscall table with W=1 throws the warning as following pattern: arch/riscv/kernel/syscall_table.c:14:36: warning: initialized field overwritten [-Woverride-init] 14 | #define __SYSCALL(nr, call) [nr] = (call), | ^ ./include/uapi/asm-generic/unistd.h:29:37: note: in expansion of macro ‘__SYSCALL’ 29 | #define __SC_COMP(_nr, _sys, _comp) __SYSCALL(_nr, _sys) | ^~~~~~~~~ ./include/uapi/asm-generic/unistd.h:34:1: note: in expansion of macro ‘__SC_COMP’ 34 | __SC_COMP(__NR_io_setup, sys_io_setup, compat_sys_io_setup) | ^~~~~~~~~ arch/riscv/kernel/syscall_table.c:14:36: note: (near initialization for ‘sys_call_table[0]’) 14 | #define __SYSCALL(nr, call) [nr] = (call), | ^ ./include/uapi/asm-generic/unistd.h:29:37: note: in expansion of macro ‘__SYSCALL’ 29 | #define __SC_COMP(_nr, _sys, _comp) __SYSCALL(_nr, _sys) | ^~~~~~~~~ ./include/uapi/asm-generic/unistd.h:34:1: note: in expansion of macro ‘__SC_COMP’ 34 | __SC_COMP(__NR_io_setup, sys_io_setup, compat_sys_io_setup) | ^~~~~~~~~ arch/riscv/kernel/syscall_table.c:14:36: warning: initialized field overwritten [-Woverride-init] ... Since we intentionally build the syscall tables this way,ignore the warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: time: Fix no prototype for time_initNanyong Sun2-0/+3
Fix the following W=1 compilation warning: arch/riscv/kernel/time.c:16:13: warning: no previous prototype for ‘time_init’ [-Wmissing-prototypes] 16 | void __init time_init(void) | ^~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: ptrace: Fix no prototype warningsNanyong Sun1-0/+5
Fix the following W=1 kernel compilation warnings: arch/riscv/kernel/ftrace.c:186:6: warning: no previous prototype for ‘prepare_ftrace_return’ [-Wmissing-prototypes] 186 | void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, | ^~~~~~~~~~~~~~~~~~~~~ arch/riscv/kernel/ptrace.c:239:15: warning: no previous prototype for ‘do_syscall_trace_enter’ [-Wmissing-prototypes] 239 | __visible int do_syscall_trace_enter(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~~ arch/riscv/kernel/ptrace.c:262:16: warning: no previous prototype for ‘do_syscall_trace_exit’ [-Wmissing-prototypes] 262 | __visible void do_syscall_trace_exit(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: sbi: Fix comment of __sbi_set_timer_v01Nanyong Sun1-1/+1
Fix the comment of __sbi_set_timer_v01, the function name in comment is missing '__' Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: irq: Fix no prototype warningNanyong Sun1-0/+2
Fix the following W=1 kernel compilation warning: arch/riscv/kernel/irq.c:19:13: warning: no previous prototype for ‘init_IRQ’ [-Wmissing-prototypes] 19 | void __init init_IRQ(void) | ^~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10riscv: traps: Fix no prototype warningsNanyong Sun2-0/+17
Fix all W=1 compilation warnings:'no previous prototype for' in arch/riscv/kernel/traps.c: arch/riscv/kernel/traps.c:96:15: warning: no previous prototype for ‘do_trap_unknown’ [-Wmissing-prototypes] 96 | DO_ERROR_INFO(do_trap_unknown, | ^~~~~~~~~~~~~~~ arch/riscv/kernel/traps.c:91:27: note: in definition of macro ‘DO_ERROR_INFO’ 91 | asmlinkage __visible void name(struct pt_regs *regs) \ | ^~~~ arch/riscv/kernel/traps.c:98:15: warning: no previous prototype for ‘do_trap_insn_misaligned’ [-Wmissing-prototypes] 98 | DO_ERROR_INFO(do_trap_insn_misaligned, | ^~~~~~~~~~~~~~~~~~~~~~~ arch/riscv/kernel/traps.c:91:27: note: in definition of macro ‘DO_ERROR_INFO’ 91 | asmlinkage __visible void name(struct pt_regs *regs) \ | ^~~~ arch/riscv/kernel/traps.c:100:15: warning: no previous prototype for ‘do_trap_insn_fault’ [-Wmissing-prototypes] ... Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> [Palmer: fix checkpatch warnings] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-10RISC-V: correct enum sbi_ext_rfence_fidHeinrich Schuchardt1-2/+2
The constants in enum sbi_ext_rfence_fid should match the SBI specification. See https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc#78-function-listing | Function Name | FID | EID | sbi_remote_fence_i | 0 | 0x52464E43 | sbi_remote_sfence_vma | 1 | 0x52464E43 | sbi_remote_sfence_vma_asid | 2 | 0x52464E43 | sbi_remote_hfence_gvma_vmid | 3 | 0x52464E43 | sbi_remote_hfence_gvma | 4 | 0x52464E43 | sbi_remote_hfence_vvma_asid | 5 | 0x52464E43 | sbi_remote_hfence_vvma | 6 | 0x52464E43 Fixes: ecbacc2a3efd ("RISC-V: Add SBI v0.2 extension definitions") Reported-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-28Merge tag 'riscv-for-linus-5.12-mw1' of ↵Linus Torvalds4-19/+5
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "A pair of patches that slipped through the cracks: - enable CPU hotplug in the defconfigs - some cleanups to setup_bootmem There's also a single fix for some randconfig build failures: - make NUMA depend on SMP" * tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Cleanup setup_bootmem() RISC-V: Enable CPU Hotplug in defconfigs RISC-V: Make NUMA depend on SMP
2021-02-27Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
2021-02-27riscv: Cleanup setup_bootmem()Kefeng Wang1-19/+2
After the following patches, commit de043da0b9e7 ("RISC-V: Fix usage of memblock_enforce_memory_limit") commit 1bd14a66ee52 ("RISC-V: Remove any memblock representing unusable memory area") commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()") some logic is useless, kill the mem_start/start/end and unneeded code. Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-27RISC-V: Enable CPU Hotplug in defconfigsAnup Patel2-0/+2
The CPU hotplug support has been tested on QEMU, Spike, and SiFive Unleashed so let's enable it by default in RV32 and RV64 defconfigs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-27RISC-V: Make NUMA depend on SMPPalmer Dabbelt1-0/+1
In theory these are orthogonal, but in practice all NUMA systems are SMP. NUMA && !SMP doesn't build, everyone else is coupling them, and I don't really see any value in supporting that configuration. Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform") Suggested-by: Andrew Morton <akpm@linux-foundation.org> Suggested-by: Atish Patra <atishp@atishpatra.org> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds74-660/+4329
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-23riscv: Improve kasan population by using hugepages when possibleAlexandre Ghiti1-0/+24
The kasan functions that populates the shadow regions used to allocate them page by page and did not take advantage of hugepages, so fix this by trying to allocate hugepages of 1GB and fallback to 2MB hugepages or 4K pages in case it fails. This reduces the page table memory consumption and improves TLB usage, as shown below: Before this patch: ---[ Kasan shadow start ]--- 0xffffffc000000000-0xffffffc400000000 0x00000000818ef000 16G PTE . A . . . . R V 0xffffffc400000000-0xffffffc447fc0000 0x00000002b7f4f000 1179392K PTE D A . . . W R V 0xffffffc480000000-0xffffffc800000000 0x00000000818ef000 14G PTE . A . . . . R V ---[ Kasan shadow end ]--- After this patch: ---[ Kasan shadow start ]--- 0xffffffc000000000-0xffffffc400000000 0x00000000818ef000 16G PTE . A . . . . R V 0xffffffc400000000-0xffffffc440000000 0x0000000240000000 1G PGD D A . . . W R V 0xffffffc440000000-0xffffffc447e00000 0x00000002b7e00000 126M PMD D A . . . W R V 0xffffffc447e00000-0xffffffc447fc0000 0x00000002b818f000 1792K PTE D A . . . W R V 0xffffffc480000000-0xffffffc800000000 0x00000000818ef000 14G PTE . A . . . . R V ---[ Kasan shadow end ]--- Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Improve kasan population functionAlexandre Ghiti1-28/+63
Current population code populates a whole page table without taking care of what could have been already allocated and without taking into account possible index in page table, assuming the virtual address to map is always aligned on the page table size, which, for example, won't be the case when the kernel will get pushed to the end of the address space. Address those problems by rewriting the kasan population function, splitting it into subfunctions for each different page table level. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Use KASAN_SHADOW_INIT define for kasan memory initializationAlexandre Ghiti1-2/+2
Instead of hardcoding memory initialization to 0, use KASAN_SHADOW_INIT. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Improve kasan definitionsAlexandre Ghiti1-3/+19
There is no functional change here, only improvement in code readability by adding comments to explain where the kasan constants come from and by replacing hardcoded numerical constant by the corresponding define. Note that the comments come from arm64. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Get rid of MAX_EARLY_MAPPING_SIZEAlexandre Ghiti1-16/+5
At early boot stage, we have a whole PGDIR to map the kernel, so there is no need to restrict the early mapping size to 128MB. Removing this define also allows us to simplify some compile time logic. This fixes large kernel mappings with a size greater than 128MB, as it is the case for syzbot kernels whose size was just ~130MB. Note that on rv64, for now, we are then limited to PGDIR size for early mapping as we can't use PGD mappings (see [1]). That should be enough given the relative small size of syzbot kernels compared to PGDIR_SIZE which is 1GB. [1] https://lore.kernel.org/lkml/20200603153608.30056-1-alex@ghiti.fr/ Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Disable KSAN_SANITIZE for vDSOTobias Klauser1-1/+2
We use the generic C VDSO implementations of a handful of clock-related functions. When kasan is enabled this results in asan stub calls that are unlikely to be resolved by userspace, this just disables KASAN when building the VDSO. Verified the fix on a kernel with KASAN enabled using vDSO selftests. Link: https://lore.kernel.org/lkml/CACT4Y+ZNJBnkKHXUf=tm_yuowvZvHwN=0rmJ=7J+xFd+9r_6pQ@mail.gmail.com/ Tested-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Dmitry Vyukov <dvyukov@google.com> [Palmer: commit text] Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Remove unnecessary declarationKefeng Wang1-3/+0
max_low_pfn and min_low_pfn are declared in linux/memblock.h, and it also is included in arch/riscv/mm/init.c, drop unnecessary declaration. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Add Canaan Kendryte K210 SD card defconfigDamien Le Moal1-0/+92
The nommu_k210_defconfig default configuration allows booting a Canaan Kendryte K210 SoC based boards using an embedded intramfs cpio file. Modifying this configuration to enable support for the board SD card is not trivial for all users. To help beginners getting started with these boards, add the nommu_k210_sdcard_defconfig default configuration file to set all configuration options necessary to use the board mmc-spi sd card for the root file system. This new configuration adds support for the block layer, the mmc-spi driver and modifies the boot options to specify the rootfs device as mmcblk0p1 (first partition of the sd card block device). The ext2 file system is selected by default to encourage its use as that results in only about 4KB added to the kernel image size. As ext2 does not have journaling, the boot options specify a read-only mount of the file system. Similarly to the smaller nommu_k210_defconfig, this new default configuration disables virtual terminal support to reduce the kernel image size. The default device tree selected is unchanged, specifying the simple "k210_generic" device tree file. The user must change this setting to specify the device tree suitable for the board being used (sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or canaan_kd233). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Update Canaan Kendryte K210 defconfigDamien Le Moal1-8/+36
Update the Kendryte k210 nommu default configuration file (nommu_k210_defconfig) to include device drivers for reset, reboot, I2C, SPI, gpio and LEDs support. Virtual Terminal support is also disabled as no terminal devices are supported and enabled. Disabling CONFIG_VT (removing the no longer needed override for CONFIG_VGA_CONSOLE) reduces the kernel image size by about 65 KB. This default configuration remains suitable for a system using an initramfs cpio file linked into the kernel image. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Add Kendryte KD233 board device treeDamien Le Moal1-0/+152
Add the device tree canaan_kd233.dts for the Canaan Kendryte KD233 development board. This device tree enables LEDs, some gpios and spi/mmc SD card device. The WS2812B RGB LED and the 10 positions rotary dip switch present on the board are left undefined. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> [Palmer: Remove undocumented microphone entry, along with the use.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Add SiPeed MAIXDUINO board device treeDamien Le Moal1-0/+184
Add the device tree sipeed_maixduino.dts for the SiPeed MAIXDUINO board. This device tree enables LEDs and spi/mmc SD card device. Additionally, gpios and i2c are also enabled and mapped to the board header pins as indicated on the board itself. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [Palmer: Remove undocumented microphone entry, along with the use.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Add SiPeed MAIX GO board device treeDamien Le Moal1-0/+219
Add the device tree sipeed_maix_go.dts for the SiPeed MAIX GO board. This device tree enables buttons, LEDs, gpio, i2c and spi/mmc SD card devices. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [Palmer: Remove undocumented microphone entry, along with the use.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Add SiPeed MAIX DOCK board device treeDamien Le Moal1-0/+211
Add the device tree sipeed_maix_dock.dts for the SiPeed MAIX DOCK m1 and m1w boards. This device tree enables LEDs, gpio, i2c and spi/mmc SD card devices. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [Palmer: Remove undocumented microphone entry, along with the use.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Add SiPeed MAIX BiT board device treeDamien Le Moal1-0/+209
Add the device tree sipeed_maix_bit.dts for the SiPeed MAIX BiT and MAIX BiTm boards. This device tree enables LEDs, gpio, i2c and spi/mmc SD card devices. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [Palmer: Remove undocumented microphone entry, along with the use.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23riscv: Update Canaan Kendryte K210 device treeDamien Le Moal4-52/+414
Update the Canaan Kendryte K210 base device tree k210.dtsi to define all supported peripherals of the SoC, their clocks and reset lines. The device tree file k210.dts is renamed to k210_generic.dts and becomes the default value selection of the configuration option SOC_CANAAN_K210_DTB_BUILTIN_SOURCE. No device beside the serial console is defined by this device tree. This makes this generic device tree suitable for use with a builtin initramfs with all known K210 based boards. These changes result in the K210_CLK_ACLK clock ID to be unused and removed from the dt-bindings k210-clk.h header file. Most updates to the k210.dtsi file come from Sean Anderson's work on U-Boot support for the K210. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-23RISC-V: Add a non-void return for sbi v02 functionsAtish Patra2-21/+21
SBI v0.2 functions can return an error code from SBI implementation. We are already processing the SBI error code and coverts it to the Linux error code. Propagate to the error code to the caller as well. As of now, kvm is the only user of these error codes. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22arch: setup PF_IO_WORKER threads like PF_KTHREADJens Axboe1-1/+1
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the sense that we don't assign ->set_child_tid with our own structure. Just ensure that every arch sets up the PF_IO_WORKER threads like kthreads in the arch implementation of copy_thread(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2-8/+28
Pull networking updates from David Miller: "Here is what we have this merge window: 1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik. 2) Add RSS multi group support to octeontx2-pf driver, from Geetha Sowjanya. 3) Add support for KS8851 PHY. From Marek Vasut. 4) Add support for GarfieldPeak bluetooth controller from Kiran K. 5) Add support for half-duplex tcan4x5x can controllers. 6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw Liew. 7) Rework RX port offload infrastructure, particularly wrt, UDP tunneling, from Jakub Kicinski. 8) Add BCM72116 PHY support, from Florian Fainelli. 9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir Oltean. 10) Add support for picosecond rx delay in dwmac-meson8b chips. From Martin Blumenstingl. 11) Support TSO on xfrm interfaces from Eyal Birger. 12) Add support for MP_PRIO to mptcp stack, from Geliang Tang. 13) Support BCM4908 integrated switch, from Rafał Miłecki. 14) Support for directly accessing kernel module variables via module BTF info, from Andrii Naryiko. 15) Add DASH (esktop and mobile Architecture for System Hardware) support to r8169 driver, from Heiner Kallweit. 16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron. 17) Add support for 100 base0x SFP devices, from Bjarni Jonasson. 18) Support link aggregation in DSA, from Tobias Waldekranz. 19) Support for bitwidse atomics in bpf, from Brendan Jackman. 20) SmartEEE support in at803x driver, from Russell King. 21) Add support for flow based tunneling to GTP, from Pravin B Shelar. 22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder. 23) TLS RX offload for bonding, from Tariq Toukan. 24) RX decap offklload support in mac80211, from Felix Fietkou. 25) devlink health saupport in octeontx2-af, from George Cherian. 26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung 27) Delegated actionss support in mptcp, from Paolo Abeni. 28) Support receive timestamping when doin zerocopy tcp receive. From Arjun Ray. 29) HTB offload support for mlx5, from Maxim Mikityanskiy. 30) UDP GRO forwarding, from Maxim Mikityanskiy. 31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach. 32) Weighted random twos choice algorithm for ipvs, from Darby Payne. 33) Fix netdev registration deadlock, from Johannes Berg. 34) Various conversions to new tasklet api, from EmilRenner Berthing. 35) Bulk skb allocations in veth, from Lorenzo Bianconi. 36) New ethtool interface for lane setting, from Danielle Ratson. 37) Offload failiure notifications for routes, from Amit Cohen. 38) BCM4908 support, from Rafał Miłecki. 39) Support several new iwlwifi chips, from Ihab Zhaika. 40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski. 41) Support for mhi prrotocols, from Loic Poulain. 42) Optimize bpf program stats. 43) Implement RFC6056, for better port randomization, from Eric Dumazet. 44) hsr tag offloading support from George McCollister. 45) Netpoll support in qede, from Bhaskar Upadhaya. 46) 2005/400g speed support in bonding 3ad mode, from Nikolay Aleksandrov. 47) Netlink event support in mptcp, from Florian Westphal. 48) Better skbuff caching, from Alexander Lobakin. 49) MRP (Media Redundancy Protocol) offloading in DSA and a few drivers, from Horatiu Vultur. 50) mqprio saupport in mvneta, from Maxime Chevallier. 51) Remove of_phy_attach, no longer needed, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits) octeontx2-pf: Fix otx2_get_fecparam() cteontx2-pf: cn10k: Prevent harmless double shift bugs net: stmmac: Add PCI bus info to ethtool driver query output ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable. ptp: ptp_clockmatrix: Coding style - tighten vertical spacing. ptp: ptp_clockmatrix: Clean-up dev_*() messages. ptp: ptp_clockmatrix: Remove unused header declarations. ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable. ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock. net: stmmac: dwmac-sun8i: Add a shutdown callback net: stmmac: dwmac-sun8i: Minor probe function cleanup net: stmmac: dwmac-sun8i: Use reset_control_reset net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check net: stmmac: dwmac-sun8i: Return void from PHY unpower r8169: use macro pm_ptr net: mdio: Remove of_phy_attach() net: mscc: ocelot: select PACKING in the Kconfig net: re-solve some conflicts after net -> net-next merge net: dsa: tag_rtl4_a: Support also egress tags ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-06 18:32:01 +0300