summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2022-08-19KVM: Rename mmu_notifier_* to mmu_invalidate_*Chao Peng1-2/+2
The motivation of this renaming is to make these variables and related helper functions less mmu_notifier bound and can also be used for non mmu_notifier based page invalidation. mmu_invalidate_* was chosen to better describe the purpose of 'invalidating' a page that those variables are used for. - mmu_notifier_seq/range_start/range_end are renamed to mmu_invalidate_seq/range_start/range_end. - mmu_notifier_retry{_hva} helper functions are renamed to mmu_invalidate_retry{_hva}. - mmu_notifier_count is renamed to mmu_invalidate_in_progress to avoid confusion with mn_active_invalidate_count. - While here, also update kvm_inc/dec_notifier_count() to kvm_mmu_invalidate_begin/end() to match the change for mmu_notifier_count. No functional change intended. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-13Merge tag 'riscv-for-linus-5.20-mw2' of ↵Linus Torvalds42-78/+667
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "There's still a handful of new features in here, but there are a lot of fixes/cleanups as well: - Support for the Zicbom extension for explicit cache-block management, along with the necessary bits to make the non-standard cache management ops on the Allwinner D1 function - Support for the Zihintpause extension, which codifies a go-slow instruction used for cpu_relax() - Support for the Sstc extension for supervisor-mode timer/counter management - Many device tree fixes and cleanups, including a large set for the Canaan device trees - A handful of fixes and cleanups for the PMU driver" * tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits) dt-bindings: gpio: sifive: add gpio-line-names wireguard: selftests: set CONFIG_NONPORTABLE on riscv32 RISC-V: KVM: Support sstc extension RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details riscv:uprobe fix SR_SPIE set/clear handling dt-bindings: riscv: fix SiFive l2-cache's cache-sets riscv: ensure cpu_ops_sbi is declared RISC-V: cpu_ops_spinwait.c should include head.h RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h> riscv: dts: starfive: correct number of external interrupts riscv: dts: sifive unmatched: Add PWM controlled LEDs riscv/purgatory: Omit use of bin2c riscv/purgatory: hard-code obj-y in Makefile ...
2022-08-12RISC-V: KVM: Support sstc extensionAtish Patra4-7/+153
Sstc extension allows the guest to program the vstimecmp CSR directly instead of making an SBI call to the hypervisor to program the next event. The timer interrupt is also directly injected to the guest by the hardware in this case. To maintain backward compatibility, the hypervisors also update the vstimecmp in an SBI set_time call if the hardware supports it. Thus, the older kernels in guest also take advantage of the sstc extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12perf: riscv_pmu{,_sbi}: Miscallenous improvement & fixesPalmer Dabbelt1-2/+30
A series of mostly-independent fixes and cleanups for the RISC-V PMU drivers. Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2 * palmer/riscv-pmu: RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32
2022-08-12RISC-V: Improve SBI definitionsAtish Patra1-2/+16
Fixed few typos and bit fields not aligned with the spec. Define other related macros that will be useful in the future. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-6-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Move counter info definition to sbi header fileAtish Patra1-0/+14
Counter info encoding format is defined by the SBI specificaiton. KVM implementation of SBI PMU extension will also leverage this definition. Move the definition to common sbi header file from the sbi pmu driver. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Add Sstc extension supportPalmer Dabbelt4-0/+8
This series implements Sstc extension support which was ratified recently. Before the Sstc extension, an SBI call is necessary to generate timer interrupts as only M-mode have access to the timecompare registers. Thus, there is significant latency to generate timer interrupts at kernel. For virtualized enviornments, its even worse as the KVM handles the SBI call and uses a software timer to emulate the timecomapre register. Sstc extension solves both these problems by defining a stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to program a timer and recieve interrupt without supervisor execution enviornment (M-mode/HS mode) intervention. * palmer/riscv-sstc: RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details
2022-08-12RISC-V: Enable sstc extension parsing from DTAtish Patra3-0/+3
The ISA extension framework now allows parsing any multi-letter ISA extension. Enable that for sstc extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220722165047.519994-3-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Add SSTC extension CSR detailsAtish Patra1-0/+5
This patch just introduces the required CSR fields related to the SSTC extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220722165047.519994-2-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12riscv:uprobe fix SR_SPIE set/clear handlingYipeng Zou1-6/+0
In riscv the process of uprobe going to clear spie before exec the origin insn,and set spie after that.But When access the page which origin insn has been placed a page fault may happen and irq was disabled in arch_uprobe_pre_xol function,It cause a WARN as follows. There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol. We can just remove it. [ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488 [ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work [ 31.684929] preempt_count: 0, expected: 0 [ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G [ 31.686542] Hardware name: riscv-virtio,qemu (DT) [ 31.686797] Call Trace: [ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38 [ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c [ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c [ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20 [ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122 [ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a [ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130 [ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446 [ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc Fixes: 74784081aac8 ("riscv: Add uprobes supported") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220721065820.245755-1-zouyipeng@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv: ensure cpu_ops_sbi is declaredConor Dooley2-0/+3
Sparse complains that cpu_ops_sbi is used undeclared: arch/riscv/kernel/cpu_ops_sbi.c:17:29: warning: symbol 'cpu_ops_sbi' was not declared. Should it be static? Fix the warning by adding cpu_ops_sbi to cpu_ops_sbi.h & including that where used. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220714080235.3853374-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: cpu_ops_spinwait.c should include head.hBen Dooks1-0/+2
Running sparse shows cpu_ops_spinwait.c is missing two definitions found in head.h, so include it to stop the following warnings: arch/riscv/kernel/cpu_ops_spinwait.c:15:6: warning: symbol '__cpu_spinwait_stack_pointer' was not declared. Should it be static? arch/riscv/kernel/cpu_ops_spinwait.c:16:6: warning: symbol '__cpu_spinwait_task_pointer' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220713215306.94675-1-ben.dooks@sifive.com Fixes: c78f94f35cf6 ("RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>Ben Dooks2-3/+2
The cpu_ops_spinwait is used in a couple of places in arch/riscv and is causing a sparse warning due to no declaration. Add this to <asm/cpu_ops.h> with the others to fix the following: arch/riscv/kernel/cpu_ops_spinwait.c:16:29: warning: symbol 'cpu_ops_spinwait' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220714071811.187491-1-ben.dooks@sifive.com [Palmer: Drop the extern from cpu_ops.c] Fixes: 2ffc48fc7071 ("RISC-V: Move spinwait booting method to its own config") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv: dts: starfive: correct number of external interruptsMark Kettenis1-1/+1
The PLIC integrated on the Vic_U7_Core integrated on the StarFive JH7100 SoC actually supports 133 external interrupts. 127 of these are exposed to the outside world; the remainder are used by other devices that are part of the core-complex such as the L2 cache controller. But all 133 interrupts are external interrupts as far as the PLIC is concerned. Fix the property so that the driver can manage these additional interrupts, which is important since the interrupts for the L2 cache controller are enabled by default. Fixes: ec85362fb121 ("RISC-V: Add initial StarFive JH7100 device tree") Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220707185529.19509-1-kettenis@openbsd.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv: dts: sifive unmatched: Add PWM controlled LEDsEmil Renner Berthing1-0/+42
This adds the two PWM controlled LEDs to the HiFive Unmatched device tree. D12 is just a regular green diode, but D2 is an RGB diode with 3 PWM inputs controlling the three different colours. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Ron Economos <re@w6rz.net> Link: https://lore.kernel.org/r/20220705210143.315151-5-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv/purgatory: Omit use of bin2cMasahiro Yamada4-9/+15
The .incbin assembler directive is much faster than bin2c + $(CC). Do similar refactoring as in commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"). Please note the .quad directive matches to size_t in C (both 8 byte) because the purgatory is compiled only for the 64-bit kernel. (KEXEC_FILE depends on 64BIT). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220625223438.835408-2-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv/purgatory: hard-code obj-y in MakefileMasahiro Yamada1-1/+1
The purgatory/ directory is entirely guarded in arch/riscv/Kbuild. CONFIG_ARCH_HAS_KEXEC_PURGATORY is bool type. $(CONFIG_ARCH_HAS_KEXEC_PURGATORY) is always 'y' when Kbuild visits this Makefile for building. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220625223438.835408-1-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: fixups to work with crash toolPalmer Dabbelt3-6/+28
A handful of fixes to our kexec/crash kernel support that allow crash tool to function. Link: https://lore.kernel.org/r/mhng-f5fdaa37-e99a-4214-a297-ec81f0fed0c1@palmer-mbp2014 * commit 'f9293ad46d8ba9909187a37b7215324420ad4596': RISC-V: Add modules to virtual kernel memory layout dump RISC-V: Fixup schedule out issue in machine_crash_shutdown() RISC-V: Fixup get incorrect user mode PC for kernel mode regs RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context
2022-08-11RISC-V: Add modules to virtual kernel memory layout dumpXianting Tian1-0/+4
Modules always live before the kernel, MODULES_END is fixed but MODULES_VADDR isn't fixed, it depends on the kernel size. Let's add it to virtual kernel memory layout dump. As MODULES is only defined for CONFIG_64BIT, so we dump it when CONFIG_64BIT=y. eg, MODULES_VADDR - MODULES_END 0xffffffff01133000 - 0xffffffff80000000 Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-5-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv: traps_misaligned: do not duplicate stringifyKrzysztof Kozlowski1-5/+3
Use existing stringify macro from the kernel headers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220623112905.253157-1-krzysztof.kozlowski@linaro.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fixup schedule out issue in machine_crash_shutdown()Xianting Tian1-4/+22
Current task of executing crash kexec will be schedule out when panic is triggered by RCU Stall, as it needs to wait rcu completion. It lead to inability to enter the crash system. The implementation of machine_crash_shutdown() is non-standard for RISC-V according to other Arch's implementation(eg, x86, arm64), we need to send IPI to stop secondary harts. [224521.877268] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [224521.883471] rcu: 0-...0: (3 GPs behind) idle=cfa/0/0x1 softirq=3968793/3968793 fqs=2495 [224521.891742] (detected by 2, t=5255 jiffies, g=60855593, q=328) [224521.897754] Task dump for CPU 0: [224521.901074] task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x00000008 [224521.911090] Call Trace: [224521.913638] [<ffffffe000c432de>] __schedule+0x208/0x5ea [224521.918957] Kernel panic - not syncing: RCU Stall [224521.923773] bad: scheduling from the idle thread! [224521.928571] CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Tainted: G O 5.10.113-yocto-standard #1 [224521.938658] Call Trace: [224521.941200] [<ffffffe00020395c>] walk_stackframe+0x0/0xaa [224521.946689] [<ffffffe000c34f8e>] show_stack+0x32/0x3e [224521.951830] [<ffffffe000c39020>] dump_stack_lvl+0x7e/0xa2 [224521.957317] [<ffffffe000c39058>] dump_stack+0x14/0x1c [224521.962459] [<ffffffe000243884>] dequeue_task_idle+0x2c/0x40 [224521.968207] [<ffffffe000c434f4>] __schedule+0x41e/0x5ea [224521.973520] [<ffffffe000c43826>] schedule+0x34/0xe4 [224521.978487] [<ffffffe000c46cae>] schedule_timeout+0xc6/0x170 [224521.984234] [<ffffffe000c4491e>] wait_for_completion+0x98/0xf2 [224521.990157] [<ffffffe00026d9e2>] __wait_rcu_gp+0x148/0x14a [224521.995733] [<ffffffe0002761c4>] synchronize_rcu+0x5c/0x66 [224522.001307] [<ffffffe00026f1a6>] rcu_sync_enter+0x54/0xe6 [224522.006795] [<ffffffe00025a436>] percpu_down_write+0x32/0x11c [224522.012629] [<ffffffe000c4266a>] _cpu_down+0x92/0x21a [224522.017771] [<ffffffe000219a0a>] smp_shutdown_nonboot_cpus+0x90/0x118 [224522.024299] [<ffffffe00020701e>] machine_crash_shutdown+0x30/0x4a [224522.030483] [<ffffffe00029a3f8>] __crash_kexec+0x62/0xa6 [224522.035884] [<ffffffe000c3515e>] panic+0xfa/0x2b6 [224522.040678] [<ffffffe0002772be>] rcu_sched_clock_irq+0xc26/0xcb8 [224522.046774] [<ffffffe00027fc7a>] update_process_times+0x62/0x8a [224522.052785] [<ffffffe00028d522>] tick_sched_timer+0x9e/0x102 [224522.058533] [<ffffffe000280c3a>] __hrtimer_run_queues+0x16a/0x318 [224522.064716] [<ffffffe0002812ec>] hrtimer_interrupt+0xd4/0x228 [224522.070551] [<ffffffe0009a69b6>] riscv_timer_interrupt+0x3c/0x48 [224522.076646] [<ffffffe000268f8c>] handle_percpu_devid_irq+0xb0/0x24c [224522.083004] [<ffffffe00026428e>] __handle_domain_irq+0xa8/0x122 [224522.089014] [<ffffffe00062f954>] riscv_intc_irq+0x38/0x60 [224522.094501] [<ffffffe000201bd4>] ret_from_exception+0x0/0xc [224522.100161] [<ffffffe000c42146>] rcu_eqs_enter.constprop.0+0x8c/0xb8 With the patch, it can enter crash system when RCU Stall occur. Fixes: e53d28180d4d ("RISC-V: Add kdump support") Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-4-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fixup get incorrect user mode PC for kernel mode regsXianting Tian1-1/+1
When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address. Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack. [ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45 [ 21.201979] Hardware name: riscv-virtio,qemu (DT) [ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90 [ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c [ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0 [ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00 [ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8 [ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700 [ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8 [ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal, crash> bt PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh" #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc #6 [ff2000001039be40] vfs_write at ffffffff80152ba6 #7 [ff2000001039be80] ksys_write at ffffffff80152ece #8 [ff2000001039bed0] sys_write at ffffffff80152f46 With the patch, we can get current kernel mode PC, the output as below, [ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42 [ 17.607937] Hardware name: riscv-virtio,qemu (DT) [ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90 [ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68 [ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0 [ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4 [ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700 [ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988 [ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the correct PC, the backtrace showed by crash tool as below, crash> bt PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh" #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2 #7 [ff20000010333e80] ksys_write at ffffffff80152eda #8 [ff20000010333ed0] sys_write at ffffffff80152f52 Fixes: e53d28180d4d ("RISC-V: Add kdump support") Co-developed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-3-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: kexec: Fixup use of smp_processor_id() in preemptible contextXianting Tian1-1/+1
Use __smp_processor_id() to avoid check the preemption context when CONFIG_DEBUG_PREEMPT enabled, as we will enter crash kernel and no return. Without the patch, [ 103.781044] sysrq: Trigger a crash [ 103.784625] Kernel panic - not syncing: sysrq triggered crash [ 103.837634] CPU1: off [ 103.889668] CPU2: off [ 103.933479] CPU3: off [ 103.939424] Starting crashdump kernel... [ 103.943442] BUG: using smp_processor_id() in preemptible [00000000] code: sh/346 [ 103.950884] caller is debug_smp_processor_id+0x1c/0x26 [ 103.956051] CPU: 0 PID: 346 Comm: sh Kdump: loaded Not tainted 5.10.113-00002-gce03f03bf4ec-dirty #149 [ 103.965355] Call Trace: [ 103.967805] [<ffffffe00020372a>] walk_stackframe+0x0/0xa2 [ 103.973206] [<ffffffe000bcf1f4>] show_stack+0x32/0x3e [ 103.978258] [<ffffffe000bd382a>] dump_stack_lvl+0x72/0x8e [ 103.983655] [<ffffffe000bd385a>] dump_stack+0x14/0x1c [ 103.988705] [<ffffffe000bdc8fe>] check_preemption_disabled+0x9e/0xaa [ 103.995057] [<ffffffe000bdc926>] debug_smp_processor_id+0x1c/0x26 [ 104.001150] [<ffffffe000206c64>] machine_kexec+0x22/0xd0 [ 104.006463] [<ffffffe000291a7e>] __crash_kexec+0x6a/0xa4 [ 104.011774] [<ffffffe000bcf3fa>] panic+0xfc/0x2b0 [ 104.016480] [<ffffffe000656ca4>] sysrq_reset_seq_param_set+0x0/0x70 [ 104.022745] [<ffffffe000657310>] __handle_sysrq+0x8c/0x154 [ 104.028229] [<ffffffe0006577e8>] write_sysrq_trigger+0x5a/0x6a [ 104.034061] [<ffffffe0003d90e0>] proc_reg_write+0x58/0xd4 [ 104.039459] [<ffffffe00036cff4>] vfs_write+0x7e/0x254 [ 104.044509] [<ffffffe00036d2f6>] ksys_write+0x58/0xbe [ 104.049558] [<ffffffe00036d36a>] sys_write+0xe/0x16 [ 104.054434] [<ffffffe000201b9a>] ret_from_syscall+0x0/0x2 [ 104.067863] Will call new kernel at ecc00000 from hart id 0 [ 104.074939] FDT image at fc5ee000 [ 104.079523] Bye... With the patch we can got clear output, [ 67.740553] sysrq: Trigger a crash [ 67.744166] Kernel panic - not syncing: sysrq triggered crash [ 67.809123] CPU1: off [ 67.865210] CPU2: off [ 67.909075] CPU3: off [ 67.919123] Starting crashdump kernel... [ 67.924900] Will call new kernel at ecc00000 from hart id 0 [ 67.932045] FDT image at fc5ee000 [ 67.935560] Bye... Fixes: 0e105f1d0037 ("riscv: use hart id instead of cpu id on machine_kexec") Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-2-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11arch/riscv: add Zihintpause supportDao Lu5-3/+29
Implement support for the ZiHintPause extension. The PAUSE instruction is a HINT that indicates the current hart’s rate of instruction retirement should be temporarily reduced or paused. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dao Lu <daolu@rivosinc.com> [Palmer: Some minor merge conflicts.] Link: https://lore.kernel.org/all/20220620201530.3929352-1-daolu@rivosinc.com/ Link: https://lore.kernel.org/all/20220811053356.17375-1-palmer@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv: implement Zicbom-based CMO instructions + the t-head variantPalmer Dabbelt13-2/+282
This series is based on the alternatives changes done in my svpbmt series and thus also depends on Atish's isa-extension parsing series. It implements using the cache-management instructions from the Zicbom- extension to handle cache flush, etc actions on platforms needing them. SoCs using cpu cores from T-Head like the Allwinne D1 implement a different set of cache instructions. But while they are different, instructions they provide the same functionality, so a variant can easly hook into the existing alternatives mechanism on those. [Palmer: Some minor fixups, including a RISCV_ISA_ZICBOM dependency on MMU that's probably not strictly necessary. The Zicbom support will trip up sparse for users that have new toolchains, I just sent a patch.] Link: https://lore.kernel.org/all/20220706231536.2041855-1-heiko@sntech.de/ Link: https://lore.kernel.org/linux-sparse/20220811033138.20676-1-palmer@rivosinc.com/T/#u * palmer/riscv-zicbom: riscv: implement cache-management errata for T-Head SoCs riscv: Add support for non-coherent devices using zicbom extension dt-bindings: riscv: document cbom-block-size of: also handle dma-noncoherent in of_dma_is_coherent()
2022-08-11RISC-V: Canaan devicetree fixesPalmer Dabbelt7-31/+66
This series should rid us of dtbs_check errors for the RISC-V Canaan k210 based boards. To make keeping it that way a little easier, I changed the Canaan devicetree Makefile so that it would build all of the devicetrees in the directory if SOC_CANAAN. Link: https://lore.kernel.org/all/mhng-85044754-c361-40bc-a6a2-7082f35930bb@palmer-ri-x1c9/ * remotes/palmer/riscv-canaan_dt_schema: riscv: dts: canaan: build all devicetress if SOC_CANAAN riscv: dts: canaan: add specific compatible for kd233's LCD riscv: dts: canaan: fix bus {ranges,reg} warnings riscv: dts: canaan: remove spi-max-frequency from controllers riscv: dts: canaan: use custom compatible for k210 i2s riscv: dts: canaan: fix kd233 display spi frequency riscv: dts: canaan: fix mmc node names riscv: dts: canaan: fix the k210's timer nodes riscv: dts: canaan: fix the k210's memory node dt-bindings: memory-controllers: add canaan k210 sram controller dt-bindings: display: ili9341: document canaan kd233's lcd dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
2022-08-11riscv: lib: uaccess: fix CSR_STATUS SR_SUM bitChen Lifu1-2/+2
Since commit 5d8544e2d007 ("RISC-V: Generic library routines and assembly") and commit ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code"), if __clear_user and __copy_user return from an fixup branch, CSR_STATUS SR_SUM bit will be set, it is a vulnerability, so that S-mode memory accesses to pages that are accessible by U-mode will success. Disable S-mode access to U-mode memory should clear SR_SUM bit. Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly") Fixes: ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code") Signed-off-by: Chen Lifu <chenlifu@huawei.com> Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20220615014714.1650349-1-chenlifu@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-07Merge tag 'mm-nonmm-stable-2022-08-06-2' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...
2022-08-07Merge tag 'riscv-for-linus-5.20-mw0' of ↵Linus Torvalds33-125/+333
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Enabling the FPU is now a static_key - Improvements to the Svpbmt support - CPU topology bindings for a handful of systems - Support for systems with 64-bit hart IDs - Many settings have been enabled in the defconfig, including both support for the StarFive systems and many of the Docker requirements There are also a handful of cleanups and improvements, as usual. * tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits) riscv: enable Docker requirements in defconfig riscv: convert the t-head pbmt errata to use the __nops macro riscv: introduce nops and __nops macros for NOP sequences RISC-V: Add fast call path of crash_kexec() riscv: mmap with PROT_WRITE but no PROT_READ is invalid riscv/efi_stub: Add 64bit boot-hartid support on RV64 riscv: cpu: Add 64bit hartid support on RV64 riscv: smp: Add 64bit hartid support on RV64 riscv: spinwait: Fix hartid variable type riscv: cpu_ops_sbi: Add 64bit hartid support on RV64 riscv: dts: sifive: "fix" pmic watchdog node name riscv: dts: canaan: Add k210 topology information riscv: dts: sifive: Add fu740 topology information riscv: dts: sifive: Add fu540 topology information riscv: dts: starfive: Add JH7100 CPU topology RISC-V: Add CONFIG_{NON,}PORTABLE riscv: config: enable SOC_STARFIVE in defconfig riscv: dts: microchip: Add mpfs' topology information riscv: Kconfig.socs: Add comments riscv: Kconfig.erratas: Add comments ...
2022-08-06Merge tag 'mm-stable-2022-08-03' of ↵Linus Torvalds3-20/+24
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-08-05Merge tag 'asm-generic-6.0' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT.
2022-08-05Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds1-27/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds14-602/+1019
Pull kvm updates from Paolo Bonzini: "Quite a large pull request due to a selftest API overhaul and some patches that had come in too late for 5.19. ARM: - Unwinder implementations for both nVHE modes (classic and protected), complete with an overflow stack - Rework of the sysreg access from userspace, with a complete rewrite of the vgic-v3 view to allign with the rest of the infrastructure - Disagregation of the vcpu flags in separate sets to better track their use model. - A fix for the GICv2-on-v3 selftest - A small set of cosmetic fixes RISC-V: - Track ISA extensions used by Guest using bitmap - Added system instruction emulation framework - Added CSR emulation framework - Added gfp_custom flag in struct kvm_mmu_memory_cache - Added G-stage ioremap() and iounmap() functions - Added support for Svpbmt inside Guest s390: - add an interface to provide a hypervisor dump for secure guests - improve selftests to use TAP interface - enable interpretive execution of zPCI instructions (for PCI passthrough) - First part of deferred teardown - CPU Topology - PV attestation - Minor fixes x86: - Permit guests to ignore single-bit ECC errors - Intel IPI virtualization - Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS - PEBS virtualization - Simplify PMU emulation by just using PERF_TYPE_RAW events - More accurate event reinjection on SVM (avoid retrying instructions) - Allow getting/setting the state of the speaker port data bit - Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent - "Notify" VM exit (detect microarchitectural hangs) for Intel - Use try_cmpxchg64 instead of cmpxchg64 - Ignore benign host accesses to PMU MSRs when PMU is disabled - Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior - Allow NX huge page mitigation to be disabled on a per-vm basis - Port eager page splitting to shadow MMU as well - Enable CMCI capability by default and handle injected UCNA errors - Expose pid of vcpu threads in debugfs - x2AVIC support for AMD - cleanup PIO emulation - Fixes for LLDT/LTR emulation - Don't require refcounted "struct page" to create huge SPTEs - Miscellaneous cleanups: - MCE MSR emulation - Use separate namespaces for guest PTEs and shadow PTEs bitmasks - PIO emulation - Reorganize rmap API, mostly around rmap destruction - Do not workaround very old KVM bugs for L0 that runs with nesting enabled - new selftests API for CPUID Generic: - Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache - new selftests API using struct kvm_vcpu instead of a (vm, id) tuple" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits) selftests: kvm: set rax before vmcall selftests: KVM: Add exponent check for boolean stats selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test selftests: KVM: Check stat name before other fields KVM: x86/mmu: remove unused variable RISC-V: KVM: Add support for Svpbmt inside Guest/VM RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap() RISC-V: KVM: Add G-stage ioremap() and iounmap() functions KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache RISC-V: KVM: Add extensible CSR emulation framework RISC-V: KVM: Add extensible system instruction emulation framework RISC-V: KVM: Factor-out instruction emulation into separate sources RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function RISC-V: KVM: Fix variable spelling mistake RISC-V: KVM: Improve ISA extension by using a bitmap KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs() KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT KVM: x86: Do not block APIC write for non ICR registers ...
2022-08-04riscv: implement cache-management errata for T-Head SoCsHeiko Stuebner3-5/+74
The T-Head C906 and C910 implement a scheme for handling cache operations different from the generic Zicbom extension. Add an errata for it next to the generic dma coherency ops. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220706231536.2041855-5-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-04Merge tag 'net-next-6.0' of ↵Linus Torvalds3-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...
2022-08-04Merge tag 'efi-next-for-v5.20' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: - Enable mirrored memory for arm64 - Fix up several abuses of the efivar API - Refactor the efivar API in preparation for moving the 'business logic' part of it into efivarfs - Enable ACPI PRM on arm64 * tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) ACPI: Move PRM config option under the main ACPI config ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64 ACPI: PRM: Change handler_addr type to void pointer efi: Simplify arch_efi_call_virt() macro drivers: fix typo in firmware/efi/memmap.c efi: vars: Drop __efivar_entry_iter() helper which is no longer used efi: vars: Use locking version to iterate over efivars linked lists efi: pstore: Omit efivars caching EFI varstore access layer efi: vars: Add thin wrapper around EFI get/set variable interface efi: vars: Don't drop lock in the middle of efivar_init() pstore: Add priv field to pstore_record for backend specific use Input: applespi - avoid efivars API and invoke EFI services directly selftests/kexec: remove broken EFI_VARS secure boot fallback check brcmfmac: Switch to appropriate helper to load EFI variable contents iwlwifi: Switch to proper EFI variable store interface media: atomisp_gmin_platform: stop abusing efivar API efi: efibc: avoid efivar API for setting variables efi: avoid efivars layer when loading SSDTs from variables efi: Correct comment on efi_memmap_alloc memblock: Disable mirror feature if kernelcore is not specified ...
2022-08-03Merge tag 'rcu.2022.07.26a' of ↵Linus Torvalds2-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...
2022-08-01Merge tag 'locking-core-2022-08-01' of ↵Linus Torvalds1-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "This was a fairly quiet cycle for the locking subsystem: - lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives that can lose the lock_type & cause false reports. No such mishap was observed in the wild. - jump_label improvements: simplify the cross-arch support of initial NOP patching by making it arch-specific code (used on MIPS only), and remove the s390 initial NOP patching that was superfluous" * tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix lockdep_init_map_*() confusion jump_label: make initial NOP patching the special case jump_label: mips: move module NOP patching into arch code jump_label: s390: avoid pointless initial NOP patching
2022-08-01Merge remote-tracking branch 'kvm/next' into kvm-next-5.20Paolo Bonzini1-5/+4
KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID
2022-07-30profile: setup_profiling_timer() is moslty not implementedBen Dooks1-6/+0
The setup_profiling_timer() is mostly un-implemented by many architectures. In many places it isn't guarded by CONFIG_PROFILE which is needed for it to be used. Make it a weak symbol in kernel/profile.c and remove the 'return -EINVAL' implementations from the kenrel. There are a couple of architectures which do return 0 from the setup_profiling_timer() function but they don't seem to do anything else with it. To keep the /proc compatibility for now, leave these for a future update or removal. On ARM, this fixes the following sparse warning: arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29Merge tag 'riscv-for-linus-5.19-rc9' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "A build fix for 'make vdso_install' that avoids an issue trying to install the compat VDSO" * tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: compat: vdso: Fix vdso_install target
2022-07-29RISC-V: KVM: Add support for Svpbmt inside Guest/VMAnup Patel3-0/+33
The Guest/VM can use Svpbmt in VS-stage page tables when allowed by the Hypervisor using the henvcfg.PBMTE bit. We add Svpbmt support for the KVM Guest/VM which can be enabled/disabled by the KVM user-space (QEMU/KVMTOOL) using the ISA extension ONE_REG interface. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()Anup Patel1-1/+1
When the host has Svpbmt extension, we should use page based memory type 2 (i.e. IO) for IO mappings in the G-stage page table. To achieve this, we replace use of PAGE_KERNEL with PAGE_KERNEL_IO in the kvm_riscv_gstage_ioremap(). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Add G-stage ioremap() and iounmap() functionsAnup Patel2-4/+19
The in-kernel AIA IMSIC support requires on-demand mapping / unmapping of Guest IMSIC address to Host IMSIC guest files. To help achieve this, we add kvm_riscv_stage2_ioremap() and kvm_riscv_stage2_iounmap() functions. These new functions for updating G-stage page table mappings will be called in atomic context so we have special "in_atomic" parameter for this purpose. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Add extensible CSR emulation frameworkAnup Patel4-16/+201
We add an extensible CSR emulation framework which is based upon the existing system instruction emulation. This will be useful to upcoming AIA, PMU, Nested and other virtualization features. The CSR emulation framework also has provision to emulate CSR in user space but this will be used only in very specific cases such as AIA IMSIC CSR emulation in user space or vendor specific CSR emulation in user space. By default, all CSRs not handled by KVM RISC-V will be redirected back to Guest VCPU as illegal instruction trap. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Add extensible system instruction emulation frameworkAnup Patel2-9/+82
We will be emulating more system instructions in near future with upcoming AIA, PMU, Nested and other virtualization features. To accommodate above, we add an extensible system instruction emulation framework in vcpu_insn.c. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Factor-out instruction emulation into separate sourcesAnup Patel5-493/+562
The instruction and CSR emulation for VCPU is going to grow over time due to upcoming AIA, PMU, Nested and other virtualization features. Let us factor-out VCPU instruction emulation from vcpu_exit.c to a separate source dedicated for this purpose. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_runNikolay Borisov1-3/+2
local_irq_disable provides stronger guarantees than preempt_disable so calling the latter is redundant when interrupts are disabled. Instead, explicitly disable preemption right before interrupts are enabled/disabled to ensure that the time accounted in guest_timing_exit_irqoff includes time taken by the guest or interrupts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Make kvm_riscv_guest_timer_init a void functionNikolay Borisov3-5/+5
It can never fail so convey that fact explicitly by making the function void. Also in kvm_arch_init_vm it makes it clear that there no need to do any cleanup after kvm_riscv_gstage_vmid_init has been called. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-07-29RISC-V: KVM: Fix variable spelling mistakeZhang Jiaming2-7/+7
There is a spelling mistake in mmu.c and vcpu_exit.c. Fix it. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Signed-off-by: Anup Patel <anup@brainfault.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 23:41:38 +0300