| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since commit 778666df60f0 ("s390: compile relocatable kernel without
-fPIE") and commit 00cda11d3b2e ("s390: Compile kernel with -fPIC and
link with -no-pie") the kernel on s390x may have a Global Offset Table
(GOT) whose entries are adjusted for KASLR in kaslr_adjust_got().
The GOT may contain entries for undefined weak symbols that resolved to
zero. That is the resulting GOT entry value is zero. Adjusting those
entries unconditionally in kaslr_adjust_got() is wrong. Otherwise the
following sample code would erroneously assume foo to be defined, due to
the adjustment changing the zero-value to a non-zero one:
extern int foo __attribute__((weak));
if (*foo)
/* foo is defined [or undefined and erroneously adjusted] */
The vmlinux build at commit 00cda11d3b2e ("s390: Compile kernel with
-fPIC and link with -no-pie") with defconfig actually had two GOT
entries for the undefined weak symbols __start_BTF and __stop_BTF:
$ objdump -tw vmlinux | grep -F "*UND*"
0000000000000000 w *UND* 0000000000000000 __stop_BTF
0000000000000000 w *UND* 0000000000000000 __start_BTF
$ readelf -rw vmlinux | grep -E "R_390_GOTENT +0{16}"
000000345760 2776a0000001a R_390_GOTENT 0000000000000000 __stop_BTF + 2
000000345766 2d5480000001a R_390_GOTENT 0000000000000000 __start_BTF + 2
The s390-specific vmlinux linker script sets the section start to
__START_KERNEL, which is currently defined as 0x100000 on s390x. Access
to lowcore is performed via a pointer of 0 and not a symbol in a section
starting at 0. The first 64K are reserved for the loader on s390x. Thus
it is safe to assume that __START_KERNEL will never be 0. As a result
there cannot be any defined symbols resolving to zero in the kernel.
Note that the first three GOT entries are reserved for the dynamic
loader on s390x. [1] In the kernel they are zero. Therefore no extra
handling is required to skip these.
Skip adjusting GOT entries with a value of zero in kaslr_adjust_got().
While at it update the comment when a GOT exists on s390x. Since commit
00cda11d3b2e ("s390: Compile kernel with -fPIC and link with -no-pie")
it no longer only exists when compiling with Clang, but also with GCC.
[1]: s390x ELF ABI, section "Global Offset Table",
https://github.com/IBM/s390x-abi/releases
Fixes: 778666df60f0 ("s390: compile relocatable kernel without -fPIE")
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Since physical and virtual kernel address spaces are uncoupled
the kernel image is not mapped using large segment pages anymore,
which is a regression.
Put the kernel image at the same large segment page offset in
physical memory as in virtual memory. Such approach preserves
the existing number of bits of entropy used for randomization
of the kernel location in virtual memory when KASLR is on.
As result, the kernel is mapped using large segment pages.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Do not allow creation of large pages against physical addresses,
which itself are not aligned on the correct boundary. Failure to
do so might lead to referencing wrong memory as result of the way
DAT works.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
It is nowhere used in the decompressor, therefore remove it.
Fixes: 17e89e1340a3 ("s390/facilities: move stfl information from lowcore to global data")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When the kernel is built with CONFIG_PIE_BUILD option enabled it
uses dynamic symbols, for which the linker does not allow more
than 64K number of entries. This can break features like kpatch.
Hence, whenever possible the kernel is built with CONFIG_PIE_BUILD
option disabled. For that support of unaligned symbols generated by
linker scripts in the compiler is necessary.
However, older compilers might lack such support. In that case the
build process resorts to CONFIG_PIE_BUILD option-enabled build.
Compile object files with -fPIC option and then link the kernel
binary with -no-pie linker option.
As result, the dynamic symbols are not generated and not only kpatch
feature succeeds, but also the whole CONFIG_PIE_BUILD option-enabled
code could be dropped.
[ agordeev: Reworded the commit message ]
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The .vmlinux.relocs section is moved in front of the compressed
kernel. The interim section rescue step is avoided as result.
Suggested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED
kernel configuration variable.
In case CONFIG_KERNEL_UNCOMPRESSED is disabled avoid uncompressing
the kernel to a temporary buffer and copying it to the target
address. Instead, uncompress it directly to the target destination.
In case CONFIG_KERNEL_UNCOMPRESSED is enabled avoid moving the
kernel to default 0x100000 location when KASLR is disabled or
failed. Instead, use the uncompressed kernel image directly.
In case KASLR is disabled or failed .amode31 section location in
memory is not randomized and precedes the kernel image. In case
CONFIG_KERNEL_UNCOMPRESSED is disabled that location overlaps the
area used by the decompression algorithm. That is fine, since that
area is not used after the decompression finished and the size of
.amode31 section is not expected to exceed BOOT_HEAP_SIZE ever.
There is no decompression in case CONFIG_KERNEL_UNCOMPRESSED is
enabled. Therefore, rename decompress_kernel() to deploy_kernel(),
which better describes both uncompressed and compressed cases.
Introduce AMODE31_SIZE macro to avoid immediate value of 0x3000
(the size of .amode31 section) in the decompressor linker script.
Modify the vmlinux linker script to force the size of .amode31
section to AMODE31_SIZE (the value of (_eamode31 - _samode31)
could otherwise differ as result of compiler options used).
Introduce __START_KERNEL macro that defines the kernel ELF image
entry point and set it to the currrent value of 0x100000.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Since kernel virtual and physical address spaces are
uncoupled the kernel is mapped at the top of the virtual
address space in case KASLR is disabled.
That does not pose any issue with regard to the kernel
booting and operation, but makes it difficult to use a
generated vmlinux with some debugging tools (e.g. gdb),
because the exact location of the kernel image in virtual
memory is unknown. Make that location known and introduce
CONFIG_KERNEL_IMAGE_BASE configuration option.
A custom CONFIG_KERNEL_IMAGE_BASE value that would break
the virtual memory layout leads to a build error.
The kernel image size is defined by KERNEL_IMAGE_SIZE
macro and set to 512 MB, by analogy with x86.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The uncoupling physical vs virtual address spaces brings
the following benefits to s390:
- virtual memory layout flexibility;
- closes the address gap between kernel and modules, it
caused s390-only problems in the past (e.g. 'perf' bugs);
- allows getting rid of trampolines used for module calls
into kernel;
- allows simplifying BPF trampoline;
- minor performance improvement in branch prediction;
- kernel randomization entropy is magnitude bigger, as it is
derived from the amount of available virtual, not physical
memory;
The whole change could be described in two pictures below:
before and after the change.
Some aspects of the virtual memory layout setup are not
clarified (number of page levels, alignment, DMA memory),
since these are not a part of this change or secondary
with regard to how the uncoupling itself is implemented.
The focus of the pictures is to explain why __va() and __pa()
macros are implemented the way they are.
Memory layout in V==R mode:
| Physical | Virtual |
+- 0 --------------+- 0 --------------+ identity mapping start
| | S390_lowcore | Low-address memory
| +- 8 KB -----------+
| | |
| | identity | phys == virt
| | mapping | virt == phys
| | |
+- AMODE31_START --+- AMODE31_START --+ .amode31 rand. phys/virt start
|.amode31 text/data|.amode31 text/data|
+- AMODE31_END ----+- AMODE31_END ----+ .amode31 rand. phys/virt start
| | |
| | |
+- __kaslr_offset, __kaslr_offset_phys| kernel rand. phys/virt start
| | |
| kernel text/data | kernel text/data | phys == kvirt
| | |
+------------------+------------------+ kernel phys/virt end
| | |
| | |
| | |
| | |
+- ident_map_size -+- ident_map_size -+ identity mapping end
| |
| ... unused gap |
| |
+---- vmemmap -----+ 'struct page' array start
| |
| virtually mapped |
| memory map |
| |
+- __abs_lowcore --+
| |
| Absolute Lowcore |
| |
+- __memcpy_real_area
| |
| Real Memory Copy|
| |
+- VMALLOC_START --+ vmalloc area start
| |
| vmalloc area |
| |
+- MODULES_VADDR --+ modules area start
| |
| modules area |
| |
+------------------+ UltraVisor Secure Storage limit
| |
| ... unused gap |
| |
+KASAN_SHADOW_START+ KASAN shadow memory start
| |
| KASAN shadow |
| |
+------------------+ ASCE limit
Memory layout in V!=R mode:
| Physical | Virtual |
+- 0 --------------+- 0 --------------+
| | S390_lowcore | Low-address memory
| +- 8 KB -----------+
| | |
| | |
| | ... unused gap |
| | |
+- AMODE31_START --+- AMODE31_START --+ .amode31 rand. phys/virt start
|.amode31 text/data|.amode31 text/data|
+- AMODE31_END ----+- AMODE31_END ----+ .amode31 rand. phys/virt end (<2GB)
| | |
| | |
+- __kaslr_offset_phys | kernel rand. phys start
| | |
| kernel text/data | |
| | |
+------------------+ | kernel phys end
| | |
| | |
| | |
| | |
+- ident_map_size -+ |
| |
| ... unused gap |
| |
+- __identity_base + identity mapping start (>= 2GB)
| |
| identity | phys == virt - __identity_base
| mapping | virt == phys + __identity_base
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+---- vmemmap -----+ 'struct page' array start
| |
| virtually mapped |
| memory map |
| |
+- __abs_lowcore --+
| |
| Absolute Lowcore |
| |
+- __memcpy_real_area
| |
| Real Memory Copy|
| |
+- VMALLOC_START --+ vmalloc area start
| |
| vmalloc area |
| |
+- MODULES_VADDR --+ modules area start
| |
| modules area |
| |
+- __kaslr_offset -+ kernel rand. virt start
| |
| kernel text/data | phys == (kvirt - __kaslr_offset) +
| | __kaslr_offset_phys
+- kernel .bss end + kernel rand. virt end
| |
| ... unused gap |
| |
+------------------+ UltraVisor Secure Storage limit
| |
| ... unused gap |
| |
+KASAN_SHADOW_START+ KASAN shadow memory start
| |
| KASAN shadow |
| |
+------------------+ ASCE limit
Unused gaps in the virtual memory layout could be present
or not - depending on how partucular system is configured.
No page tables are created for the unused gaps.
The relative order of vmalloc, modules and kernel image in
virtual memory is defined by following considerations:
- start of the modules area and end of the kernel should reside
within 4GB to accommodate relative 32-bit jumps. The best way
to achieve that is to place kernel next to modules;
- vmalloc and module areas should locate next to each other
to prevent failures and extra reworks in user level tools
(makedumpfile, crash, etc.) which treat vmalloc and module
addresses similarily;
- kernel needs to be the last area in the virtual memory
layout to easily distinguish between kernel and non-kernel
virtual addresses. That is needed to (again) simplify
handling of addresses in user level tools and make __pa()
macro faster (see below);
Concluding the above, the relative order of the considered
virtual areas in memory is: vmalloc - modules - kernel.
Therefore, the only change to the current memory layout is
moving kernel to the end of virtual address space.
With that approach the implementation of __pa() macro is
straightforward - all linear virtual addresses less than
kernel base are considered identity mapping:
phys == virt - __identity_base
All addresses greater than kernel base are kernel ones:
phys == (kvirt - __kaslr_offset) + __kaslr_offset_phys
By contrast, __va() macro deals only with identity mapping
addresses:
virt == phys + __identity_base
.amode31 section is mapped separately and is not covered by
__pa() macro. In fact, it could have been handled easily by
checking whether a virtual address is within the section or
not, but there is no need for that. Thus, let __pa() code
do as little machine cycles as possible.
The KASAN shadow memory is located at the very end of the
virtual memory layout, at addresses higher than the kernel.
However, that is not a linear mapping and no code other than
KASAN instrumentation or API is expected to access it.
When KASLR mode is enabled the kernel base address randomized
within a memory window that spans whole unused virtual address
space. The size of that window depends from the amount of
physical memory available to the system, the limit imposed by
UltraVisor (if present) and the vmalloc area size as provided
by vmalloc= kernel command line parameter.
In case the virtual memory is exhausted the minimum size of
the randomization window is forcefully set to 2GB, which
amounts to in 15 bits of entropy if KASAN is enabled or 17
bits of entropy in default configuration.
The default kernel offset 0x100000 is used as a magic value
both in the decompressor code and vmlinux linker script, but
it will be removed with a follow-up change.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.
Currently __kaslr_offset is the kernel offset in both
physical memory on boot and in virtual memory after DAT
mode is enabled.
Uncouple these offsets and rename the physical address
space variant to __kaslr_offset_phys while keep the name
__kaslr_offset for the offset in virtual address space.
Do not use __kaslr_offset_phys after DAT mode is enabled
just yet, but still make it a persistent boot variable
for later use.
Use __kaslr_offset and __kaslr_offset_phys offsets in
proper contexts and alter handle_relocs() function to
distinguish between the two.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.
Put virtual memory layout information into a structure
to improve code generation when accessing the structure
members, which are currently only ident_map_size and
__kaslr_offset.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.
Currently the order of virtual memory areas is (the lowcore
and .amode31 section are skipped, as it is irrelevant):
identity mapping (the kernel is contained within)
vmemmap
vmalloc
modules
Absolute Lowcore
Real Memory Copy
In the future the kernel will be mapped separately and placed
to the end of the virtual address space, so the layout would
turn like this:
identity mapping
vmemmap
vmalloc
modules
Absolute Lowcore
Real Memory Copy
kernel
However, the distance between kernel and modules needs to be as
little as possible, ideally - none. Thus, the Absolute Lowcore
and Real Memory Copy areas would stay in the way and therefore
need to be moved as well:
identity mapping
vmemmap
Absolute Lowcore
Real Memory Copy
vmalloc
modules
kernel
To facilitate such layout swap the vmalloc and Absolute Lowcore
together with Real Memory Copy areas. As result, the current
layout turns into:
identity mapping (the kernel is contained within)
vmemmap
Absolute Lowcore
Real Memory Copy
vmalloc
modules
This will allow to locate the kernel directly next to the
modules once it gets mapped separately.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
In case vmemmap array could overlap with vmalloc area on
virtual memory layout setup, the size of vmalloc area
is decreased. That could result in less memory than user
requested with vmalloc= kernel command line parameter.
Instead, reduce the size of identity mapping (and the
size of vmemmap array as result) to avoid such overlap.
Further, currently the virtual memmory allocation "rolls"
from top to bottom and it is only VMALLOC_START that could
get increased due to the overlap. Change that to decrease-
only, which makes the whole allocation algorithm more easy
to comprehend.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The maximum mappable physical address (as returned by
arch_get_mappable_range() callback) is limited by the
value of (1UL << MAX_PHYSMEM_BITS).
The maximum physical address available to a DCSS segment
is 512GB.
In case the available online or offline memory size is less
than the DCSS limit arch_get_mappable_range() would include
never used [512GB..(1UL << MAX_PHYSMEM_BITS)] range.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
vmemmap is forcefully set to start at MAX_PHYSMEM_BITS at most.
That could be needed in the past to limit ident_map_size to
MAX_PHYSMEM_BITS. However since commit 75eba6ec0de1 ("s390:
unify identity mapping limits handling") ident_map_size is
limited in setup_ident_map_size() function, which is called
earlier.
Another reason to limit vmemmap start to MAX_PHYSMEM_BITS is
because it was returned by arch_get_mappable_range() as the
maximum mappable physical address. Since commit f641679dfe55
("s390/mm: rework arch_get_mappable_range() callback") that
is not required anymore.
As result, there is no neccessity to limit vmemmap starting
address with MAX_PHYSMEM_BITS.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Common pattern in non-verbose build output for quiet commands is that the
shorthand of a command including whitespace contains at least eight
characters. Adjust this for the RELOCS command, which comes only with seven
characters.
Before:
SORTTAB vmlinux
CC arch/s390/boot/version.o
RELOCS arch/s390/boot/relocs.S
OBJCOPY arch/s390/boot/info.bin
After:
SORTTAB vmlinux
CC arch/s390/boot/version.o
RELOCS arch/s390/boot/relocs.S
OBJCOPY arch/s390/boot/info.bin
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
pud_large() is always defined as pud_leaf(). Merge their usages. Chose
pud_leaf() because pud_leaf() is a global API, while pud_large() is not.
Link: https://lkml.kernel.org/r/20240305043750.93762-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pmd_large() is always defined as pmd_leaf(). Merge their usages. Chose
pmd_leaf() because pmd_leaf() is a global API, while pmd_large() is not.
Link: https://lkml.kernel.org/r/20240305043750.93762-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The relocation table is not expected to contain a zero-termination
entry. The existing check is likely a left-over from similar x86
code that uses zero-entries as delimiters. s390 does not have ones
and therefore the check could be avoided.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make the type of __vmlinux_relocs_64_start|end symbols as
char array, just like it is done for all other sections.
Function rescue_relocs() is simplified as result.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Do not use vmlinux.image_size within kaslr_adjust_relocs() function
to calculate the upper relocation table boundary. Instead, make both
lower and upper boundaries the function input parameters.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The end of GOT is calculated dynamically on boot. The size of GOT
is calculated on build from the start and end of GOT. Avoid both
calculations and use the end of GOT directly.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Naresh reported this build error on linux-next:
s390x-linux-gnu-ld: Unexpected GOT/PLT entries detected!
make[3]: *** [/builds/linux/arch/s390/boot/Makefile:87:
arch/s390/boot/vmlinux.syms] Error 1
make[3]: Target 'arch/s390/boot/bzImage' not remade because of errors.
The reason for the build error is an incorrect/incomplete assertion which
checks the size of the .got.plt section. Similar to x86 the size is either
zero or 24 bytes (three entries).
See commit 262b5cae67a6 ("x86/boot/compressed: Move .got.plt entries out of
the .got section") for more details. The three reserved/additional entries
for s390 are described in chapter 3.2.2 of the s390x ABI [1] (thanks to
Andreas Krebbel for pointing this out!).
[1] https://github.com/IBM/s390x-abi/releases/download/v1.6.1/lzsabi_s390x.pdf
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYvWp8TY-fMEvc3UhoVtoR_eM5VsfHj3+n+kexcfJJ+Cvw@mail.gmail.com
Fixes: 30226853d6ec ("s390: vmlinux.lds.S: explicitly handle '.got' and '.plt' sections")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with OBJDUMP=llvm-objdump, there are a series of warnings
from the section comparisons that arch/s390/boot/Makefile performs
between vmlinux and arch/s390/boot/vmlinux:
llvm-objdump: warning: section '.boot.preserved.data' mentioned in a -j/--section option, but not found in any input file
llvm-objdump: warning: section '.boot.data' mentioned in a -j/--section option, but not found in any input file
llvm-objdump: warning: section '.boot.preserved.data' mentioned in a -j/--section option, but not found in any input file
llvm-objdump: warning: section '.boot.data' mentioned in a -j/--section option, but not found in any input file
The warning is a little misleading, as these sections do exist in the
input files. It is really pointing out that llvm-objdump does not match
GNU objdump's behavior of respecting '-j' / '--section' in combination
with '-t' / '--syms':
$ s390x-linux-gnu-objdump -t -j .boot.data vmlinux.full
vmlinux.full: file format elf64-s390
SYMBOL TABLE:
0000000001951000 l O .boot.data 0000000000003000 sclp_info_sccb
00000000019550e0 l O .boot.data 0000000000000001 sclp_info_sccb_valid
00000000019550e2 g O .boot.data 0000000000001000 early_command_line
...
$ llvm-objdump -t -j .boot.data vmlinux.full
vmlinux.full: file format elf64-s390
SYMBOL TABLE:
0000000000100040 l O .text 0000000000000010 dw_psw
0000000000000000 l df *ABS* 0000000000000000 main.c
00000000001001b0 l F .text 00000000000000c6 trace_event_raw_event_initcall_level
0000000000100280 l F .text 0000000000000100 perf_trace_initcall_level
...
It may be possible to change llvm-objdump's behavior to match GNU
objdump's behavior but the difficulty of that task has not yet been
explored. The combination of '$(OBJDUMP) -t -j' is not common in the
kernel tree on a whole, so workaround this tool difference by grepping
for the sections in the full symbol table output in a similar manner to
the sed invocation. This results in no visible change for GNU objdump
users while fixing the warnings for OBJDUMP=llvm-objdump, further
enabling use of LLVM=1 for ARCH=s390 with versions of LLVM that have
support for s390 in ld.lld and llvm-objcopy.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/20240219113248.16287-C-hca@linux.ibm.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/859
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240220-s390-work-around-llvm-objdump-t-j-v1-1-47bb0366a831@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On s390, currently kernel uses the '-fPIE' compiler flag for compiling
vmlinux. This has a few problems:
- It uses dynamic symbols (.dynsym), for which the linker refuses to
allow more than 64k sections. This can break features which use
'-ffunction-sections' and '-fdata-sections', including kpatch-build
[1] and Function Granular KASLR.
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses.
Instead of using '-fPIE', resolve all the relocations at link time and
then manually adjust any absolute relocations (R_390_64) during boot.
This is done by first telling the linker to preserve all relocations
during the vmlinux link. (Note this is harmless: they are later
stripped in the vmlinux.bin link.)
Then use the 'relocs' tool to find all absolute relocations (R_390_64)
which apply to allocatable sections. The offsets of those relocations
are saved in a special section which is then used to adjust the
relocations during boot.
(Note: For some reason, Clang occasionally creates a GOT reference, even
without '-fPIE'. So Clang-compiled kernels have a GOT, which needs to
be adjusted.)
On my mostly-defconfig kernel, this reduces kernel text size by ~1.3%.
[1] https://github.com/dynup/kpatch/issues/1284
[2] https://gcc.gnu.org/pipermail/gcc-patches/2023-June/622872.html
[3] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/625986.html
Compiler consideration:
Gcc recently implemented an optimization [2] for loading symbols without
explicit alignment, aligning with the IBM Z ELF ABI. This ABI mandates
symbols to reside on a 2-byte boundary, enabling the use of the larl
instruction. However, kernel linker scripts may still generate unaligned
symbols. To address this, a new -munaligned-symbols option has been
introduced [3] in recent gcc versions. This option has to be used with
future gcc versions.
Older Clang lacks support for handling unaligned symbols generated
by kernel linker scripts when the kernel is built without -fPIE. However,
future versions of Clang will include support for the -munaligned-symbols
option. When the support is unavailable, compile the kernel with -fPIE
to maintain the existing behavior.
In addition to it:
move vmlinux.relocs to safe relocation
When the kernel is built with CONFIG_KERNEL_UNCOMPRESSED, the entire
uncompressed vmlinux.bin is positioned in the bzImage decompressor
image at the default kernel LMA of 0x100000, enabling it to be executed
in-place. However, the size of .vmlinux.relocs could be large enough to
cause an overlap with the uncompressed kernel at the address 0x100000.
To address this issue, .vmlinux.relocs is positioned after the
.rodata.compressed in the bzImage. Nevertheless, in this configuration,
vmlinux.relocs will overlap with the .bss section of vmlinux.bin. To
overcome that, move vmlinux.relocs to a safe location before clearing
.bss and handling relocs.
Compile warning fix from Sumanth Korikkar:
When kernel is built with CONFIG_LD_ORPHAN_WARN and -fno-PIE, there are
several warnings:
ld: warning: orphan section `.rela.iplt' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
ld: warning: orphan section `.rela.head.text' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
ld: warning: orphan section `.rela.init.text' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
ld: warning: orphan section `.rela.rodata.cst8' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
Orphan sections are sections that exist in an object file but don't have
a corresponding output section in the final executable. ld raises a
warning when it identifies such sections.
Eliminate the warning by placing all .rela orphan sections in .rela.dyn
and raise an error when size of .rela.dyn is greater than zero. i.e.
Dont just neglect orphan sections.
This is similar to adjustment performed in x86, where kernel is built
with -fno-PIE.
commit 5354e84598f2 ("x86/build: Add asserts for unwanted sections")
[sumanthk@linux.ibm.com: rebased Josh Poimboeuf patches and move
vmlinux.relocs to safe location]
[hca@linux.ibm.com: merged compile warning fix from Sumanth]
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219132734.22881-4-sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20240219132734.22881-5-sumanthk@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When attempting to boot a kernel compiled with OBJCOPY=llvm-objcopy,
there is a crash right at boot:
Out of memory allocating 6d7800 bytes 8 aligned in range 0:20000000
Reserved memory ranges:
0000000000000000 a394c3c30d90cdaf DECOMPRESSOR
Usable online memory ranges (info source: sclp read info [3]):
0000000000000000 0000000020000000
Usable online memory total: 20000000 Reserved: a394c3c30d90cdaf Free: 0
Call Trace:
(sp:0000000000033e90 [<0000000000012fbc>] physmem_alloc_top_down+0x5c/0x104)
sp:0000000000033f00 [<0000000000011d56>] startup_kernel+0x3a6/0x77c
sp:0000000000033f60 [<00000000000100f4>] startup_normal+0xd4/0xd4
GNU objcopy does not have any issues. Looking at differences between the
object files in each build reveals info.bin does not get properly
populated with llvm-objcopy, which results in an empty .vmlinux.info
section.
$ file {gnu,llvm}-objcopy/arch/s390/boot/info.bin
gnu-objcopy/arch/s390/boot/info.bin: data
llvm-objcopy/arch/s390/boot/info.bin: empty
$ llvm-readelf --section-headers {gnu,llvm}-objcopy/arch/s390/boot/vmlinux | rg 'File:|\.vmlinux\.info|\.decompressor\.syms'
File: gnu-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000078 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034078 035078 000b00 00 WA 0 0 1
File: llvm-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000000 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034000 035000 000b00 00 WA 0 0 1
Ulrich points out that llvm-objcopy only copies sections marked as alloc
with a binary output target, whereas the .vmlinux.info section is only
marked as load. Add 'alloc' in addition to 'load', so that both objcopy
implementations work properly:
$ file {gnu,llvm}-objcopy/arch/s390/boot/info.bin
gnu-objcopy/arch/s390/boot/info.bin: data
llvm-objcopy/arch/s390/boot/info.bin: data
$ llvm-readelf --section-headers {gnu,llvm}-objcopy/arch/s390/boot/vmlinux | rg 'File:|\.vmlinux\.info|\.decompressor\.syms'
File: gnu-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000078 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034078 035078 000b00 00 WA 0 0 1
File: llvm-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000078 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034078 035078 000b00 00 WA 0 0 1
Closes: https://github.com/ClangBuiltLinux/linux/issues/1996
Link: https://github.com/llvm/llvm-project/commit/3c02cb7492fc78fb678264cebf57ff88e478e14f
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240216-s390-fix-boot-with-llvm-objcopy-v1-1-0ac623daf42b@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several series of warnings
from the various discardable sections that the kernel adds for build
purposes that are not needed at runtime:
s390-linux-ld: warning: orphan section `.export_symbol' from `arch/s390/boot/decompressor.o' being placed in section `.export_symbol'
s390-linux-ld: warning: orphan section `.discard.addressable' from `arch/s390/boot/decompressor.o' being placed in section `.discard.addressable'
s390-linux-ld: warning: orphan section `.modinfo' from `arch/s390/boot/decompressor.o' being placed in section `.modinfo'
include/asm-generic/vmlinux.lds.h has a macro for easily discarding
these sections across the kernel named COMMON_DISCARDS, use it to clear
up the warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-9-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there is a warning around the '.comment'
section for each file in arch/s390/boot
s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/als.o' being placed in section `.comment'
s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/startup.o' being placed in section `.comment'
s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/physmem_info.o' being placed in section `.comment'
include/asm-generic/vmlinux.lds.h has a macro for required ELF sections
not related to debugging named ELF_DETAILS, use it to clear up the
warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-8-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several series of warnings for
each file in arch/s390/boot due to the boot linker script not handling
the DWARF debug sections:
s390-linux-ld: warning: orphan section `.debug_line' from `arch/s390/boot/head.o' being placed in section `.debug_line'
s390-linux-ld: warning: orphan section `.debug_info' from `arch/s390/boot/head.o' being placed in section `.debug_info'
s390-linux-ld: warning: orphan section `.debug_abbrev' from `arch/s390/boot/head.o' being placed in section `.debug_abbrev'
s390-linux-ld: warning: orphan section `.debug_aranges' from `arch/s390/boot/head.o' being placed in section `.debug_aranges'
s390-linux-ld: warning: orphan section `.debug_str' from `arch/s390/boot/head.o' being placed in section `.debug_str'
include/asm-generic/vmlinux.lds.h has a macro for DWARF debug sections
named DWARF_DEBUG, use it to clear up the warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-7-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several warnings from
arch/s390/boot/head.o due to the unhandled presence of '.rela' sections:
s390-linux-ld: warning: orphan section `.rela.iplt' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.head.text' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.got' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data.rel.ro' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.iplt' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.head.text' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.got' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data.rel.ro' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
These sections are unneeded for the decompressor and they are not
emitted in the binary currently. In a manner similar to other
architectures, coalesce the sections into '.rela.dyn' and ensure it is
zero sized, which is a safe/tested approach versus full discard.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-6-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there is a warning about the presence of
an '.init.text' section in arch/s390/boot:
s390-linux-ld: warning: orphan section `.init.text' from `arch/s390/boot/sclp_early_core.o' being placed in section `.init.text'
arch/s390/boot/sclp_early_core.c includes a file from the main kernel
build, which picks up a usage of '__init' somewhere. For the
decompressed image, this section can just be coalesced into '.text'.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-5-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are a lot of warnings around the
GOT and PLT sections:
s390-linux-ld: warning: orphan section `.plt' from `arch/s390/kernel/head64.o' being placed in section `.plt'
s390-linux-ld: warning: orphan section `.got' from `arch/s390/kernel/head64.o' being placed in section `.got'
s390-linux-ld: warning: orphan section `.got.plt' from `arch/s390/kernel/head64.o' being placed in section `.got.plt'
s390-linux-ld: warning: orphan section `.iplt' from `arch/s390/kernel/head64.o' being placed in section `.iplt'
s390-linux-ld: warning: orphan section `.igot.plt' from `arch/s390/kernel/head64.o' being placed in section `.igot.plt'
s390-linux-ld: warning: orphan section `.iplt' from `arch/s390/boot/head.o' being placed in section `.iplt'
s390-linux-ld: warning: orphan section `.igot.plt' from `arch/s390/boot/head.o' being placed in section `.igot.plt'
s390-linux-ld: warning: orphan section `.got' from `arch/s390/boot/head.o' being placed in section `.got'
Currently, only the '.got' section is actually emitted in the final
binary. In a manner similar to other architectures, put the '.got'
section near the '.data' section and coalesce the PLT sections,
checking that the final section is zero sized, which is a safe/tested
approach versus full discard.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-3-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
arch/s390/boot/vmlinux uses a different linker script and build rules
than the main vmlinux, so the '--orphan-handling' flag is not applied to
it. Add support for '--orphan-handling' so that all sections are
properly described in the linker script, which helps eliminate bugs
between linker implementations having different orphan section
heuristics.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-1-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The size of vmalloc area depends from various factors
on boot and could be set to:
1. Default size as determined by VMALLOC_DEFAULT_SIZE macro;
2. One half of the virtual address space not occupied by
modules and fixed mappings;
3. The size provided by user with vmalloc= kernel command
line parameter;
In cases [1] and [2] the vmalloc area base address is aligned
on Region3 table type boundary, while in case [3] in might get
aligned on page boundary.
Limit the waste of page tables and always align vmalloc area
size and base address on segment boundary.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Rework the way physical pages are set no-dat / dat:
The old way is:
- Rely on that all pages are initially marked "dat"
- Allocate page tables for the kernel mapping
- Enable dat
- Walk the whole kernel mapping and set PG_arch_1 bit in all struct pages
that belong to pages of kernel page tables
- Walk all struct pages and test and clear the PG_arch_1 bit. If the bit is
not set, set the page state to no-dat
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time
Change this rather complex logic to a simpler approach:
- Set the whole physical memory (all pages) to "no-dat"
- Explicitly set those page table pages to "dat" which are part of the
kernel image (e.g. swapper_pg_dir)
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time
In result the code is simpler, and this also allows to get rid of one
odd usage of the PG_arch_1 bit.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The "cmma=" kernel command line parameter needs to be parsed early for
upcoming changes. Therefore move the parsing code.
Note that EX_TABLE handling of cmma_test_essa() needs to be open-coded,
since the early boot code doesn't have infrastructure for handling expected
exceptions.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Get rid of private VM_FAULT flags
- Add word-at-a-time implementation
- Add DCACHE_WORD_ACCESS support
- Cleanup control register handling
- Disallow CPU hotplug of CPU 0 to simplify its handling complexity,
following a similar restriction in x86
- Optimize pai crypto map allocation
- Update the list of crypto express EP11 coprocessor operation modes
- Fixes and improvements for secure guests AP pass-through
- Several fixes to address incorrect page marking for address
translation with the "cmma no-dat" feature, preventing potential
incorrect guest TLB flushes
- Fix early IPI handling
- Several virtual vs physical address confusion fixes
- Various small fixes and improvements all over the code
* tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/cio: replace deprecated strncpy with strscpy
s390/sclp: replace deprecated strncpy with strtomem
s390/cio: fix virtual vs physical address confusion
s390/cio: export CMG value as decimal
s390: delete the unused store_prefix() function
s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir
s390/cmma: fix detection of DAT pages
s390/sclp: handle default case in sclp memory notifier
s390/pai_crypto: remove per-cpu variable assignement in event initialization
s390/pai: initialize event count once at initialization
s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection
s390/mm: add missing arch_set_page_dat() call to gmap allocations
s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
s390/cmma: fix initial kernel address space page table walk
s390/diag: add missing virt_to_phys() translation to diag224()
s390/mm,fault: move VM_FAULT_ERROR handling to do_exception()
s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS
s390/mm,fault: remove VM_FAULT_SIGNAL
s390/mm,fault: remove VM_FAULT_BADCONTEXT
s390/mm,fault: simplify kfence fault handling
...
|
|
Fix the follow warning reported by sparse:
arch/s390/boot/vmem.c:170:15: warning: unused variable ‘entry’ [-Wunused-variable]
170 | pte_t entry;
| ^~~~~
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When physical memory is defined under z/VM using DEF STOR CONFIG, there
may be memory holes that are not hotpluggable memory. In such cases,
DCSS mapping could be placed in one of these memory holes. Subsequently,
attempting memory access to such DCSS mapping would result in a kasan
failure because there is no shadow memory mapping for it.
To maintain consistency with cases where DCSS mapping is positioned after
the kernel identity mapping, which is then covered by kasan zero shadow
mapping, handle the scenario above by populating zero shadow mapping
for memory holes where DCSS mapping could potentially be placed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use control register bit defines instead of plain numbers where
possible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add struct ctlreg to enforce strict type checking / usage for control
register functions.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Convert all single control register usages of __local_ctl_load() and
__local_ctl_store() to local_ctl_load() and local_ctl_store().
This also requires to change the type of some struct lowcore members
from __u64 to unsigned long.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add local and system prefix to some functions to clarify they change
control register contents on either the local CPU or the on all CPUs.
This results in the following API:
Two defines which load and save multiple control registers.
The defines correlate with the following C prototypes:
void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high);
void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high);
Two functions which locally set or clear one bit for a specified
control register:
void local_ctl_set_bit(unsigned int cr, unsigned int bit);
void local_ctl_clear_bit(unsigned int cr, unsigned int bit);
Two functions which set or clear one bit for a specified control
register on all CPUs:
void system_ctl_set_bit(unsigned int cr, unsigned int bit);
void system_ctl_clear_bit(unsigend int cr, unsigned int bit);
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Rename ctl_reg.h to ctlreg.h so it matches not only ctlreg.c but also
other control register related function, union, and structure names,
which all come with a ctlreg prefix.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Control register handling has nothing to do with low level SMP code.
Move it to a separate file.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The kernel mapping is setup in two stages: in the decompressor map all
pages with RWX permissions, and within the kernel change all mappings to
their final permissions, where most of the mappings are changed from RWX to
RWNX.
Change this and map all pages RWNX from the beginning, however without
enabling noexec via control register modification. This means that
effectively all pages are used with RWX permissions like before. When the
final permissions have been applied to the kernel mapping enable noexec via
control register modification.
This allows to remove quite a bit of non-obvious code.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Do the same like x86 with commit 76ea0025a214 ("x86/cpu: Remove "noexec"")
and remove the "noexec" kernel command line option.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make multi-line comment style consistent across the source.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
