Age | Commit message (Collapse) | Author | Files | Lines |
|
Silence "warning: no previous prototype for ... [-Wmissing-prototypes]"
warnings from string.h when building under W=1.
[ bp: Clarify commit message. ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211119175325.3668419-1-keescook@chromium.org
|
|
Since commits
c041b5ad8640 ("x86, boot: Create a separate string.h file to provide standard string functions")
fb4cac573ef6 ("x86, boot: Move memcmp() into string.h and string.c")
the decompressor stub has been using the compiler's builtin memcpy,
memset and memcmp functions, _except_ where it would likely have the
largest impact, in the decompression code itself.
Remove the #undef's of memcpy and memset in misc.c so that the
decompressor code also uses the compiler builtins.
The rationale given in the comment doesn't really apply: just because
some functions use the out-of-line version is no reason to not use the
builtin version in the rest.
Replace the comment with an explanation of why memzero and memmove are
being #define'd.
Drop the suggestion to #undef in boot/string.h as well: the out-of-line
versions are not really optimized versions, they're generic code that's
good enough for the preboot environment. The compiler will likely
generate better code for constant-size memcpy/memset/memcmp if it is
allowed to.
Most decompressors' performance is unchanged, with the exception of LZ4
and 64-bit ZSTD.
Before After ARCH
LZ4 73ms 10ms 32
LZ4 120ms 10ms 64
ZSTD 90ms 74ms 64
Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels.
Decompressor code size has small differences, with the largest being
that 64-bit ZSTD decreases just over 2k. The largest code size increase
was on 64-bit XZ, of about 400 bytes.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Nick Terrell <nickrterrell@gmail.com>
Tested-by: Nick Terrell <nickrterrell@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add kstrtoul() to ../boot/ to be used by facilities there too.
[
bp: Massage, make _kstrtoul() static. Prepend function names with
"boot_". This is a temporary workaround for build errors like:
ld: arch/x86/boot/compressed/acpi.o: in function `count_immovable_mem_regions':
acpi.c:(.text+0x463): undefined reference to `_kstrtoul'
make[2]: *** [arch/x86/boot/compressed/Makefile:117: arch/x86/boot/compressed/vmlinux] Error 1
due to the namespace clash between x86/boot/ and kernel proper.
Future reorg will get rid of the linux/linux/ namespace as much as
possible so that x86/boot/ can be independent from kernel proper. ]
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1587645588-7130-2-git-send-email-vamshi.k.sthambamkadi@gmail.com
|
|
Copy kstrtoull() and the other necessary functions from lib/kstrtox.c
to boot/string.c so that code in boot/ can use kstrtoull() and the old
simple_strtoull() can gradually be phased out.
Using div_u64() from math64.h directly will cause the dividend to be
handled as a 64-bit value and cause the infamous __divdi3 linker error
due to gcc trying to use its library function for the 64-bit division.
Therefore, separate the dividend into an upper and lower part.
[ bp: Rewrite commit message. ]
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: indou.takao@jp.fujitsu.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kasong@redhat.com
Cc: Kees Cook <keescook@chromium.org>
Cc: msys.mizuma@gmail.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190123110850.12433-2-fanc.fnst@cn.fujitsu.com
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Sparse static analyzer emits this warning:
symbol 'strchr' was not declared. Should it be static?
This patch adds the appropriate extern declaration to string.h
to fix the warning.
Signed-off-by: Tommy Nguyen <remyabel@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170623143601.GA20743@NoChina
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add the missing declarations of basic string functions to string.h to allow
a clean build.
Fixes: 5be865661516 ("String-handling functions for the new x86 setup code.")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Link: http://lkml.kernel.org/r/1483781911-21399-1-git-send-email-hofrat@osadl.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Try to treat memcmp() in same way as memcpy() and memset(). Provide a
declaration in boot/string.h and by default user gets a memcmp() which
maps to builtin function.
Move optimized definition of memcmp() in boot/string.c. Now a user can
do #undef memcmp and link against string.c to use optimzied memcmp().
It also simplifies boot/compressed/string.c where we had to redefine
memcmp(). That extra definition is gone now.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1395170800-11059-5-git-send-email-vgoyal@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Create a separate arch/x86/boot/string.h file to provide declaration of
some of the common string functions.
By default memcpy, memset and memcmp functions will default to gcc
builtin functions. If code wants to use an optimized version of any
of these functions, they need to #undef the respective macro and link
against a local file providing definition of undefed function.
For example, arch/x86/boot/* code links against copy.S to get memcpy()
and memcmp() definitions. arch/86/boot/compressed/* links against
compressed/string.c.
There are quite a few places in arch/x86/ where these functions are
used. Idea is to try to consilidate their declaration and possibly
definitions so that it can be reused.
I am planning to reuse boot/string.h in arch/x86/purgatory/ and use
gcc builtin functions for memcpy, memset and memcmp.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1395170800-11059-3-git-send-email-vgoyal@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|