Age | Commit message (Collapse) | Author | Files | Lines |
|
Introduces kvm_x86_call(), to streamline the usage of static calls of
kvm_x86_ops. The current implementation of these calls is verbose and
could lead to alignment challenges. This makes the code susceptible to
exceeding the "80 columns per single line of code" limit as defined in
the coding-style document. Another issue with the existing implementation
is that the addition of kvm_x86_ prefix to hooks at the static_call sites
hinders code readability and navigation. kvm_x86_call() is added to
improve code readability and maintainability, while adhering to the coding
style guidelines.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-3-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move guest_cpuid_is_amd_or_hygon() into cpuid.c now that, except for one
Intel quirk in the emulator, KVM checks for AMD vs. Intel *compatible*
vCPUs, not exact vendors, i.e. now that there should not be any reason for
KVM at-large to care about the exact vendor.
Opportunistically refactor the guts of the helper to use "entry" instead
of "best", and short circuit the !entry path to make the common case more
readable.
Link: https://lore.kernel.org/r/20240405235603.1173076-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.10
1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.
|
|
Leave SEV and SEV_ES '0' in kvm_cpu_caps by default, and instead set them
in sev_set_cpu_caps() if SEV and SEV-ES support are fully enabled. Aside
from the fact that sev_set_cpu_caps() is wildly misleading when it *clears*
capabilities, this will allow compiling out sev.c without falsely
advertising SEV/SEV-ES support in KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is
compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with
helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel
vs. AMD behavior related to masking the LVTPC entry, KVM will need to
check for vendor compatibility on every PMI injection, i.e. querying for
AMD will soon be a moderately hot path.
Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's
default behavior, both if userspace omits (or never sets) CPUID 0x0 and if
userspace sets a completely unknown vendor. One could argue that KVM
should treat such vCPUs as not being compatible with Intel *or* AMD, but
that would add useless complexity to KVM.
KVM needs to do *something* in the face of vendor specific behavior, and
so unless KVM conjured up a magic third option, choosing to treat unknown
vendors as neither Intel nor AMD means that checks on AMD compatibility
would yield Intel behavior, and checks for Intel compatibility would yield
AMD behavior. And that's far worse as it would effectively yield random
behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs.
!Intel. And practically speaking, all x86 CPUs follow either Intel or AMD
architecture, i.e. "supporting" an unknown third architecture adds no
value.
Deliberately don't convert any of the existing guest_cpuid_is_intel()
checks, as the Intel side of things is messier due to some flows explicitly
checking for exactly vendor==Intel, versus some flows assuming anything
that isn't "AMD compatible" gets Intel behavior. The Intel code will be
cleaned up in the future.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the GuestPhysBits field in CPUID.0x80000008 to communicate the max
mappable GPA to userspace, i.e. the max GPA that is addressable by the
CPU itself. Typically this is identical to the max effective GPA, except
in the case where the CPU supports MAXPHYADDR > 48 but does not support
5-level TDP (the CPU consults bits 51:48 of the GPA only when walking the
fifth level TDP page table entry).
Enumerating the max mappable GPA via CPUID will allow guest firmware to
map resources like PCI bars in the highest possible address space, while
ensuring that the GPA is addressable by the CPU. Without precise
knowledge about the max mappable GPA, the guest must assume that 5-level
paging is unsupported and thus restrict its mappings to the lower 48 bits.
Advertise the max mappable GPA via KVM_GET_SUPPORTED_CPUID as userspace
doesn't have easy access to whether or not 5-level paging is supported,
and to play nice with userspace VMMs that reflect the supported CPUID
directly into the guest.
AMD's APM (3.35) defines GuestPhysBits (EAX[23:16]) as:
Maximum guest physical address size in bits. This number applies
only to guests using nested paging. When this field is zero, refer
to the PhysAddrSize field for the maximum guest physical address size.
Tom Lendacky confirmed that the purpose of GuestPhysBits is software use
and KVM can use it as described above. Real hardware always returns zero.
Leave GuestPhysBits as '0' when TDP is disabled in order to comply with
the APM's statement that GuestPhysBits "applies only to guest using nested
paging". As above, guest firmware will likely create suboptimal mappings,
but that is a very minor issue and not a functional concern.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240313125844.912415-3-kraxel@redhat.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop KVM's propagation of GuestPhysBits (CPUID leaf 80000008, EAX[23:16])
to HostPhysBits (same leaf, EAX[7:0]) when advertising the address widths
to userspace via KVM_GET_SUPPORTED_CPUID.
Per AMD, GuestPhysBits is intended for software use, and physical CPUs do
not set that field. I.e. GuestPhysBits will be non-zero if and only if
KVM is running as a nested hypervisor, and in that case, GuestPhysBits is
NOT guaranteed to capture the CPU's effective MAXPHYADDR when running with
TDP enabled.
E.g. KVM will soon use GuestPhysBits to communicate the CPU's maximum
*addressable* guest physical address, which would result in KVM under-
reporting PhysBits when running as an L1 on a CPU with MAXPHYADDR=52,
but without 5-level paging.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240313125844.912415-2-kraxel@redhat.com
[sean: rewrite changelog with --verbose, Cc stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit ee3a5f9e3d9b ("KVM: x86: Do runtime CPUID update before updating
vcpu->arch.cpuid_entries") moved tweaking of the supplied CPUID
data earlier in kvm_set_cpuid() but __kvm_update_cpuid_runtime() actually
uses 'vcpu->arch.kvm_cpuid' (though __kvm_find_kvm_cpuid_features()) which
gets set later in kvm_set_cpuid(). In some cases, e.g. when kvm_set_cpuid()
is called for the first time and 'vcpu->arch.kvm_cpuid' is clear,
__kvm_find_kvm_cpuid_features() fails to find KVM PV feature entry and the
logic which clears KVM_FEATURE_PV_UNHALT after enabling
KVM_X86_DISABLE_EXITS_HLT does not work.
The logic, introduced by the commit ee3a5f9e3d9b ("KVM: x86: Do runtime
CPUID update before updating vcpu->arch.cpuid_entries") must stay: the
supplied CPUID data is tweaked by KVM first (__kvm_update_cpuid_runtime())
and checked later (kvm_check_cpuid()) and the actual data
(vcpu->arch.cpuid_*, vcpu->arch.kvm_cpuid, vcpu->arch.xen.cpuid,..) is only
updated on success.
Switch to searching for KVM_SIGNATURE in the supplied CPUID data to
discover KVM PV feature entry instead of using stale 'vcpu->arch.kvm_cpuid'.
While on it, drop pointless "&& (best->eax & (1 << KVM_FEATURE_PV_UNHALT)"
check when clearing KVM_FEATURE_PV_UNHALT bit.
Fixes: ee3a5f9e3d9b ("KVM: x86: Do runtime CPUID update before updating vcpu->arch.cpuid_entries")
Reported-and-tested-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Similar to kvm_find_kvm_cpuid_features()/__kvm_find_kvm_cpuid_features(),
introduce a helper to search for the specific hypervisor signature in any
struct kvm_cpuid_entry2 array, not only in vcpu->arch.cpuid_entries.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
|
|
KVM x86 misc changes for 6.8:
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
|
|
KVM x86 Hyper-V changes for 6.8:
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
|
|
Fix typos, most reported by "codespell arch/x86". Only touches comments,
no code changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org
|
|
Hyper-V emulation in KVM is a fairly big chunk and in some cases it may be
desirable to not compile it in to reduce module sizes as well as the attack
surface. Introduce CONFIG_KVM_HYPERV option to make it possible.
Note, there's room for further nVMX/nSVM code optimizations when
!CONFIG_KVM_HYPERV, this will be done in follow-up patches.
Reorganize Makefile a bit so all CONFIG_HYPERV and CONFIG_KVM_HYPERV files
are grouped together.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-13-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
cpuid.c utilizes vmemdup_user() and array_size() to copy two userspace
arrays. This, currently, does not check for an overflow.
Use the new wrapper vmemdup_array_user() to copy the arrays more safely,
as vmemdup_user() doesn't check for overflow.
Note, KVM explicitly checks the number of entries before duplicating the
array, i.e. adding the overflow check should be a glorified nop.
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20231102181526.43279-2-pstanner@redhat.com
[sean: call out that KVM pre-checks the number of entries]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The low five bits {INTEL_PSFD, IPRED_CTRL, RRSBA_CTRL, DDPD_U, BHI_CTRL}
advertise the availability of specific bits in IA32_SPEC_CTRL. Since KVM
dynamically determines the legal IA32_SPEC_CTRL bits for the underlying
hardware, the hard work has already been done. Just let userspace know
that a guest can use these IA32_SPEC_CTRL bits.
The sixth bit (MCDT_NO) states that the processor does not exhibit MXCSR
Configuration Dependent Timing (MCDT) behavior. This is an inherent
property of the physical processor that is inherited by the virtual
CPU. Pass that information on to userspace.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20231024001636.890236-1-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
LAM is enumerated by CPUID.7.1:EAX.LAM[bit 26]. Advertise the feature to
userspace and enable it as the final step after the LAM virtualization
support for supervisor and user pointers.
SGX LAM support is not advertised yet. SGX LAM support is enumerated in
SGX's own CPUID and there's no hard requirement that it must be supported
when LAM is reported in CPUID leaf 0x7.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-13-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 Xen changes for 6.7:
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering Xen timer
events. Avoid the problematic races with using the fast path by ensuring
the hrtimer isn't running when (re)starting the timer or saving the timer
information (for userspace).
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag.
|
|
KVM x86 misc changes for 6.7:
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
|
|
Define an X86_FEATURE_* flag for CPUID.80000021H:EAX.[bit 1], and
advertise the feature to userspace via KVM_GET_SUPPORTED_CPUID.
Per AMD's "Processor Programming Reference (PPR) for AMD Family 19h
Model 61h, Revision B1 Processors (56713-B1-PUB)," this CPUID bit
indicates that a WRMSR to MSR_FS_BASE, MSR_GS_BASE, or
MSR_KERNEL_GS_BASE is non-serializing. This is a change in previously
architected behavior.
Effectively, this CPUID bit is a "defeature" bit, or a reverse
polarity feature bit. When this CPUID bit is clear, the feature
(serialization on WRMSR to any of these three MSRs) is available. When
this CPUID bit is set, the feature is not available.
KVM_GET_SUPPORTED_CPUID must pass this bit through from the underlying
hardware, if it is set. Leaving the bit clear claims that WRMSR to
these three MSRs will be serializing in a guest running under
KVM. That isn't true. Though KVM could emulate the feature by
intercepting writes to the specified MSRs, it does not do so
today. The guest is allowed direct read/write access to these MSRs
without interception, so the innate hardware behavior is preserved
under KVM.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231005031237.1652871-1-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mask off xfeatures that aren't exposed to the guest only when saving guest
state via KVM_GET_XSAVE{2} instead of modifying user_xfeatures directly.
Preserving the maximal set of xfeatures in user_xfeatures restores KVM's
ABI for KVM_SET_XSAVE, which prior to commit ad856280ddea ("x86/kvm/fpu:
Limit guest user_xfeatures to supported bits of XCR0") allowed userspace
to load xfeatures that are supported by the host, irrespective of what
xfeatures are exposed to the guest.
There is no known use case where userspace *intentionally* loads xfeatures
that aren't exposed to the guest, but the bug fixed by commit ad856280ddea
was specifically that KVM_GET_SAVE{2} would save xfeatures that weren't
exposed to the guest, e.g. would lead to userspace unintentionally loading
guest-unsupported xfeatures when live migrating a VM.
Restricting KVM_SET_XSAVE to guest-supported xfeatures is especially
problematic for QEMU-based setups, as QEMU has a bug where instead of
terminating the VM if KVM_SET_XSAVE fails, QEMU instead simply stops
loading guest state, i.e. resumes the guest after live migration with
incomplete guest state, and ultimately results in guest data corruption.
Note, letting userspace restore all host-supported xfeatures does not fix
setups where a VM is migrated from a host *without* commit ad856280ddea,
to a target with a subset of host-supported xfeatures. However there is
no way to safely address that scenario, e.g. KVM could silently drop the
unsupported features, but that would be a clear violation of KVM's ABI and
so would require userspace to opt-in, at which point userspace could
simply be updated to sanitize the to-be-loaded XSAVE state.
Reported-by: Tyler Stachecki <stachecki.tyler@gmail.com>
Closes: https://lore.kernel.org/all/20230914010003.358162-1-tstachecki@bloomberg.net
Fixes: ad856280ddea ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0")
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Message-Id: <20230928001956.924301-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for the AMD Selective Branch Predictor Barrier (SBPB) by
advertising the CPUID bit and handling PRED_CMD writes accordingly.
Note, like SRSO_NO and IBPB_BRTYPE before it, advertise support for SBPB
even if it's not enumerated by in the raw CPUID. Some CPUs that gained
support via a uCode patch don't report SBPB via CPUID (the kernel forces
the flag).
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/a4ab1e7fe50096d50fde33e739ed2da40b41ea6a.1692919072.git.jpoimboe@kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for the IBPB_BRTYPE CPUID flag, which indicates that IBPB
includes branch type prediction flushing.
Note, like SRSO_NO, advertise support for IBPB_BRTYPE even if it's not
enumerated by in the raw CPUID, i.e. bypass the cpuid_count() in
__kvm_cpu_cap_mask(). Some CPUs that gained support via a uCode patch
don't report IBPB_BRTYPE via CPUID (the kernel forces the flag).
Opportunistically use kvm_cpu_cap_check_and_set() for SRSO_NO instead
of manually querying host support (cpu_feature_enabled() and
boot_cpu_has() yield the same end result in this case).
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/79d5f5914fb42c2c62418ffbcd78f138645ded21.1692919072.git.jpoimboe@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When CONFIG_KVM_XEN=n, the size of kvm_vcpu_arch can be reduced
from 5100+ to 4400+ by adding macro control.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/all/CAPm50aKwbZGeXPK5uig18Br8CF1hOS71CE2j_dLX+ub7oJdpGg@mail.gmail.com
[sean: fix whitespace damage]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 changes for 6.6:
- Misc cleanups
- Retry APIC optimized recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR can diverge from the default iff TSC scaling is enabled, and clean
up related code
- Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
|
|
Now that KVM has a framework for caching guest CPUID feature flags, add
a "rule" that IRQs must be enabled when doing guest CPUID lookups, and
enforce the rule via a lockdep assertion. CPUID lookups are slow, and
within KVM, IRQs are only ever disabled in hot paths, e.g. the core run
loop, fast page fault handling, etc. I.e. querying guest CPUID with IRQs
disabled, especially in the run loop, should be avoided.
Link: https://lore.kernel.org/r/20230815203653.519297-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the governed feature framework to track whether or not the guest can
use 1GiB pages, and drop the one-off helper that wraps the surprisingly
non-trivial logic surrounding 1GiB page usage in the guest.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Introduce yet another X86_FEATURE flag framework to manage and cache KVM
governed features (for lack of a better name). "Governed" in this case
means that KVM has some level of involvement and/or vested interest in
whether or not an X86_FEATURE can be used by the guest. The intent of the
framework is twofold: to simplify caching of guest CPUID flags that KVM
needs to frequently query, and to add clarity to such caching, e.g. it
isn't immediately obvious that SVM's bundle of flags for "optional nested
SVM features" track whether or not a flag is exposed to L1.
Begrudgingly define KVM_MAX_NR_GOVERNED_FEATURES for the size of the
bitmap to avoid exposing governed_features.h in arch/x86/include/asm/, but
add a FIXME to call out that it can and should be cleaned up once
"struct kvm_vcpu_arch" is no longer expose to the kernel at large.
Cc: Zeng Guang <guang.zeng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Latest Intel platform GraniteRapids-D introduces AMX-COMPLEX, which adds
two instructions to perform matrix multiplication of two tiles containing
complex elements and accumulate the results into a packed single precision
tile.
AMX-COMPLEX is enumerated via CPUID.(EAX=7,ECX=1):EDX[bit 8]
Advertise AMX_COMPLEX if it's supported in hardware. There are no VMX
controls for the feature, i.e. the instructions can't be interecepted, and
KVM advertises base AMX in CPUID if AMX is supported in hardware, even if
KVM doesn't advertise AMX as being supported in XCR0, e.g. because the
process didn't opt-in to allocating tile data.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230802022954.193843-1-tao1.su@linux.intel.com
[sean: tweak last paragraph of changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Advertise CPUID 0x80000005 (L1 cache and TLB info) to userspace so that
VMMs that reflect KVM_GET_SUPPORTED_CPUID into KVM_SET_CPUID2 will
enumerate sane cache/TLB information to the guest.
CPUID 0x80000006 (L2 cache and TLB and L3 cache info) has been returned
since commit 43d05de2bee7 ("KVM: pass through CPUID(0x80000006)").
Enumerating both 0x80000005 and 0x80000006 with KVM_GET_SUPPORTED_CPUID
is better than reporting one or the other, and 0x80000005 could be helpful
for VMM to pass it to KVM_SET_CPUID{,2} for the same reason with
0x80000006.
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://lore.kernel.org/all/ZK7NmfKI9xur%2FMop@google.com
Link: https://lore.kernel.org/r/20230712183136.85561-1-itazur@amazon.com
[sean: add link, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for the CPUID flag which denotes that the CPU is not
affected by SRSO.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
KVM x86/pmu changes for 6.5:
- Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
|
|
CPUID leaf 0x80000022 i.e. ExtPerfMonAndDbg advertises some new
performance monitoring features for AMD processors.
Bit 0 of EAX indicates support for Performance Monitoring Version 2
(PerfMonV2) features. If found to be set during PMU initialization,
the EBX bits of the same CPUID function can be used to determine
the number of available PMCs for different PMU types.
Expose the relevant bits via KVM_GET_SUPPORTED_CPUID so that
guests can make use of the PerfMonV2 features.
Co-developed-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an explicit !enable_pmu check as relying on kvm_pmu_cap to be
zeroed isn't obvious. Although when !enable_pmu, KVM will have
zero-padded kvm_pmu_cap to do subsequent CPUID leaf assignments.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Update cpuid->nent if and only if kvm_vcpu_ioctl_get_cpuid2() succeeds.
The sole caller copies @cpuid to userspace only on success, i.e. the
existing code effectively does nothing.
Arguably, KVM should report the number of entries when returning -E2BIG so
that userspace doesn't have to guess the size, but all other similar KVM
ioctls() don't report the size either, i.e. userspace is conditioned to
guess.
Suggested-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://lore.kernel.org/all/20230410141820.57328-1-itazur@amazon.com
Link: https://lore.kernel.org/r/20230526210340.2799158-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM selftests, and an AMX/XCR0 bugfix, for 6.4:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
|
|
KVM x86 PMU changes for 6.4:
- Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, and overhaul the vmx_pmu_caps selftest to better
validate PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- Misc cleanups and fixes
|
|
Add a helper, kvm_get_filtered_xcr0(), to dedup code that needs to account
for XCR0 features that require explicit opt-in on a per-process basis. In
addition to documenting when KVM should/shouldn't consult
xstate_get_guest_group_perm(), the helper will also allow sanitizing the
filtered XCR0 to avoid enumerating architecturally illegal XCR0 values,
e.g. XTILE_CFG without XTILE_DATA.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
[sean: rename helper, move to x86.h, massage changelog]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a helper to query if a vCPU has run so that KVM doesn't have to open
code the check on last_vmentry_cpu being set to a magic value.
No functional change intended.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230311004618.920745-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a common X86_FEATURE_* flag for AMD's PSFD, and suppress it from
/proc/cpuinfo via the standard method of an empty string instead of
hacking in a one-off "private" #define in KVM. The request that led to
KVM defining its own flag was really just that the feature not show up
in /proc/cpuinfo, and additional patches+discussions in the interim have
clarified that defining flags in cpufeatures.h purely so that KVM can
advertise features to userspace is ok so long as the kernel already uses
a word to track the associated CPUID leaf.
No functional change intended.
Link: https://lore.kernel.org/all/d1b1e0da-29f0-c443-6c86-9549bbe1c79d@redhat.como
Link: https://lore.kernel.org/all/YxGZH7aOXQF7Pu5q@nazgul.tnic
Link: https://lore.kernel.org/all/Y3O7UYWfOLfJkwM%2F@zn.tnic
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230124194519.2893234-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add helpers to check if a specific CR0/CR4 bit is set to avoid a plethora
of implicit casts from the "unsigned long" return of kvm_read_cr*_bits(),
and to make each caller's intent more obvious.
Defer converting helpers that do truly ugly casts from "unsigned long" to
"int", e.g. is_pse(), to a future commit so that their conversion is more
isolated.
Opportunistically drop the superfluous pcid_enabled from kvm_set_cr3();
the local variable is used only once, immediately after its declaration.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230322045824.22970-2-binbin.wu@linux.intel.com
[sean: move "obvious" conversions to this commit, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
FLUSH_L1D was already added in 11e34e64e4103, but the feature is not
visible to userspace yet.
The bit definition:
CPUID.(EAX=7,ECX=0):EDX[bit 28]
If the feature is supported by the host, kvm should support it too so
that userspace can choose whether to expose it to the guest or not.
One disadvantage of not exposing it is that the guest will report
a non existing vulnerability in
/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
because the mitigation is present only if the guest supports
(FLUSH_L1D and MD_CLEAR) or FB_CLEAR.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230201132905.549148-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Cache the AMD debug registers in per-CPU variables to avoid MSR
writes where possible, when supporting a debug registers swap feature
for SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which
is part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
* tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd: Cache debug register values in percpu variables
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
x86/cpu: Support AMD Automatic IBRS
x86/cpu, kvm: Add the SMM_CTL MSR not present feature
x86/cpu, kvm: Add the Null Selector Clears Base feature
x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf
x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature
KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code
x86/cpu, kvm: Add support for CPUID_80000021_EAX
x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h>
x86/gsseg: Use the LKGS instruction if available for load_gs_index()
x86/gsseg: Move load_gs_index() to its own new header file
x86/gsseg: Make asm_load_gs_index() take an u16
x86/opcode: Add the LKGS instruction to x86-opcode-map
x86/cpufeature: Add the CPU feature bit for LKGS
x86/bugs: Reset speculation control settings on init
x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
|
|
Add the AMD Automatic IBRS feature bit to those being propagated to the guest,
and enable the guest EFER bit.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230124163319.2277355-9-kim.phillips@amd.com
|
|
The SMM_CTL MSR not present feature was being open-coded for KVM.
Add it to its newly added CPUID leaf 0x80000021 EAX proper.
Also drop the bit description comments now the code is more
self-describing.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230124163319.2277355-7-kim.phillips@amd.com
|
|
The Null Selector Clears Base feature was being open-coded for KVM.
Add it to its newly added native CPUID leaf 0x80000021 EAX proper.
Also drop the bit description comments now it's more self-describing.
[ bp: Convert test in check_null_seg_clears_base() too. ]
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230124163319.2277355-6-kim.phillips@amd.com
|