summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/trace.h
AgeCommit message (Collapse)AuthorFilesLines
2022-11-28KVM: x86/xen: Add CPL to Xen hypercall tracepointDavid Woodhouse1-6/+9
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: L2 TLB flushVitaly Kuznetsov1-8/+13
Handle L2 TLB flush requests by going through all vCPUs and checking whether there are vCPUs running the same VM_ID with a VP_ID specified in the requests. Perform synthetic exit to L2 upon finish. Note, while checking VM_ID/VP_ID of running vCPUs seem to be a bit racy, we count on the fact that KVM flushes the whole L2 VPID upon transition. Also, KVM_REQ_HV_TLB_FLUSH request needs to be done upon transition between L1 and L2 to make sure all pending requests are always processed. For the reference, Hyper-V TLFS refers to the feature as "Direct Virtual Flush". Note, nVMX/nSVM code does not handle VMCALL/VMMCALL from L2 yet. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-24-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-26KVM: x86: Print guest pgd in kvm_nested_vmenter()Mingwei Zhang1-4/+11
Print guest pgd in kvm_nested_vmenter() to enrich the information for tracing. When tdp is enabled, print the value of tdp page table (EPT/NPT); when tdp is disabled, print the value of non-nested CR3. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Link: https://lore.kernel.org/r/20220825225755.907001-4-mizhang@google.com [sean: print nested_cr3 vs. nested_eptp vs. guest_cr3] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-26KVM: x86: Update trace function for nested VM entry to support VMXMingwei Zhang1-12/+19
Update trace function for nested VM entry to support VMX. Existing trace function only supports nested VMX and the information printed out is AMD specific. So, rename trace_kvm_nested_vmrun() to trace_kvm_nested_vmenter(), since 'vmenter' is generic. Add a new field 'isa' to recognize Intel and AMD; Update the output to print out VMX/SVM related naming respectively, eg., vmcb vs. vmcs; npt vs. ept. Opportunistically update the call site of trace_kvm_nested_vmenter() to make one line per parameter. Signed-off-by: Mingwei Zhang <mizhang@google.com> Link: https://lore.kernel.org/r/20220825225755.907001-2-mizhang@google.com [sean: align indentation, s/update/rename in changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-26KVM: x86: Use u64 for address and error code in page fault tracepointSean Christopherson1-5/+4
Track the address and error code as 64-bit values in the page fault tracepoint. When TDP is enabled, the address is a GPA and thus can be a 64-bit value even on 32-bit hosts. And SVM's #NPF genereates 64-bit error codes. Opportunistically clean up the formatting. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-26KVM: Add extra information in kvm_page_fault trace pointWonhyuk Yang1-3/+9
Currently, kvm_page_fault trace point provide fault_address and error code. However it is not enough to find which cpu and instruction cause kvm_page_faults. So add vcpu id and instruction pointer in kvm_page_fault trace point. Cc: Baik Song An <bsahn@etri.re.kr> Cc: Hong Yeon Kim <kimhy@etri.re.kr> Cc: Taeung Song <taeung@reallinux.co.kr> Cc: linuxgeek@linuxgeek.io Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com> Link: https://lore.kernel.org/r/20220510071001.87169-1-vvghjk1234@gmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: x86: move all vcpu->arch.pio* setup in emulator_pio_in_out()Paolo Bonzini1-1/+1
For now, this is basically an excuse to add back the void* argument to the function, while removing some knowledge of vcpu->arch.pio* from its callers. The WARN that vcpu->arch.pio.count is zero is also extended to OUT operations. The vcpu->arch.pio* fields still need to be filled even when the PIO is handled in-kernel as __emulator_pio_in() is always followed by complete_emulator_pio_in(). But after fixing that, it will be possible to to only populate the vcpu->arch.pio* fields on userspace exits. No functional change intended. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: SVM: Add AVIC doorbell tracepointSuravee Suthikulpanit1-0/+18
Add a tracepoint to track number of doorbells being sent to signal a running vCPU to process IRQ after being injected. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-17-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-08KVM: x86: Differentiate Soft vs. Hard IRQs vs. reinjected in tracepointSean Christopherson1-5/+11
In the IRQ injection tracepoint, differentiate between Hard IRQs and Soft "IRQs", i.e. interrupts that are reinjected after incomplete delivery of a software interrupt from an INTn instruction. Tag reinjected interrupts as such, even though the information is usually redundant since soft interrupts are only ever reinjected by KVM. Though rare in practice, a hard IRQ can be reinjected. Signed-off-by: Sean Christopherson <seanjc@google.com> [MSS: change "kvm_inj_virq" event "reinjected" field type to bool] Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <9664d49b3bd21e227caa501cff77b0569bebffe2.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-08KVM: x86: Print error code in exception injection tracepoint iff validSean Christopherson1-3/+4
Print the error code in the exception injection tracepoint if and only if the exception has an error code. Define the entire error code sequence as a set of formatted strings, print empty strings if there's no error code, and abuse __print_symbolic() by passing it an empty array to coerce it into printing the error code as a hex string. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <e8f0511733ed2a0410cbee8a0a7388eac2ee5bac.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-08KVM: x86: Trace re-injected exceptionsSean Christopherson1-4/+8
Trace exceptions that are re-injected, not just those that KVM is injecting for the first time. Debugging re-injection bugs is painful enough as is, not having visibility into what KVM is doing only makes things worse. Delay propagating pending=>injected in the non-reinjection path so that the tracing can properly identify reinjected exceptions. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <25470690a38b4d2b32b6204875dd35676c65c9f2.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29KVM: SVM: Introduce trace point for the slow-path of avic_kic_target_vcpusSuravee Suthikulpanit1-0/+20
This can help identify potential performance issues when handles AVIC incomplete IPI due vCPU not running. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220420154954.19305-3-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: x86: Trace all APICv inhibit changes and capture overall statusSean Christopherson1-8/+10
Trace all APICv inhibit changes instead of just those that result in APICv being (un)inhibited, and log the current state. Debugging why APICv isn't working is frustrating as it's hard to see why APICv is still inhibited, and logging only the first inhibition means unnecessary onion peeling. Opportunistically drop the export of the tracepoint, it is not and should not be used by vendor code due to the need to serialize toggling via apicv_update_lock. Note, using the common flow means kvm_apicv_init() switched from atomic to non-atomic bitwise operations. The VM is unreachable at init, so non-atomic is perfectly ok. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220311043517.17027-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: x86: Add wrappers for setting/clearing APICv inhibitsSean Christopherson1-4/+4
Add set/clear wrappers for toggling APICv inhibits to make the call sites more readable, and opportunistically rename the inner helpers to align with the new wrappers and to make them more readable as well. Invert the flag from "activate" to "set"; activate is painfully ambiguous as it's not obvious if the inhibit is being activated, or if APICv is being activated, in which case the inhibit is being deactivated. For the functions that take @set, swap the order of the inhibit reason and @set so that the call sites are visually similar to those that bounce through the wrapper. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220311043517.17027-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: x86: Make APICv inhibit reasons an enum and cleanup namingSean Christopherson1-6/+6
Use an enum for the APICv inhibit reasons, there is no meaning behind their values and they most definitely are not "unsigned longs". Rename the various params to "reason" for consistency and clarity (inhibit may be confused as a command, i.e. inhibit APICv, instead of the reason that is getting toggled/checked). No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220311043517.17027-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-01KVM: x86: Make kvm_lapic_set_reg() a "private" xAPIC helperSean Christopherson1-3/+3
Hide the lapic's "raw" write helper inside lapic.c to force non-APIC code to go through proper helpers when modification the vAPIC state. Keep the read helper visible to outsiders for now, refactoring KVM to hide it too is possible, it will just take more work to do so. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220204214205.3306634-11-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: x86: Get the number of Hyper-V sparse banks from the VARHEAD fieldSean Christopherson1-6/+8
Get the number of sparse banks from the VARHEAD field, which the guest is required to provide as "The size of a variable header, in QWORDS.", where the variable header is: Variable Header Bytes = {Total Header Bytes - sizeof(Fixed Header)} rounded up to nearest multiple of 8 Variable HeaderSize = Variable Header Bytes / 8 In other words, the VARHEAD should match the number of sparse banks. Keep the manual count as a sanity check, but otherwise rely on the field so as to more closely align with the logic defined in the TLFS and to allow for future cleanups. Tweak the tracepoint output to use "rep_cnt" instead of simply "cnt" now that there is also "var_cnt". Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211207220926.718794-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-09KVM: x86: add a tracepoint for APICv/AVIC interrupt deliveryMaxim Levitsky1-0/+24
This allows to see how many interrupts were delivered via the APICv/AVIC from the host. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211209115440.394441-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-25KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_infoDavid Edmondson1-4/+5
Extend the get_exit_info static call to provide the reason for the VM exit. Modify relevant trace points to use this rather than extracting the reason in the caller. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210920103737.2696756-3-david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-03KVM: x86: Introduce trace_kvm_hv_hypercall_done()Vitaly Kuznetsov1-0/+15
Hypercall failures are unusual with potentially far going consequences so it would be useful to see their results when tracing. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Siddharth Chandrasekaran <sidcha@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210730122625.112848-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17KVM: x86: Rename SMM tracepoint to make it reflect realitySean Christopherson1-1/+1
Rename the SMM tracepoint, which handles both entering and exiting SMM, from kvm_enter_smm to kvm_smm_transition. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-08KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint messageSean Christopherson1-3/+3
Use the __string() machinery provided by the tracing subystem to make a copy of the string literals consumed by the "nested VM-Enter failed" tracepoint. A complete copy is necessary to ensure that the tracepoint can't outlive the data/memory it consumes and deference stale memory. Because the tracepoint itself is defined by kvm, if kvm-intel and/or kvm-amd are built as modules, the memory holding the string literals defined by the vendor modules will be freed when the module is unloaded, whereas the tracepoint and its data in the ring buffer will live until kvm is unloaded (or "indefinitely" if kvm is built-in). This bug has existed since the tracepoint was added, but was recently exposed by a new check in tracing to detect exactly this type of bug. fmt: '%s%s ' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: ' WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0 CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:trace_check_vprintf+0x3be/0x3e0 Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20 RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8 RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4 R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000 FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0 Call Trace: trace_event_printf+0x5e/0x80 trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm] print_trace_line+0x1dd/0x4e0 s_show+0x45/0x150 seq_read_iter+0x2d5/0x4c0 seq_read+0x106/0x150 vfs_read+0x98/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: 380e0055bc7e ("KVM: nVMX: trace nested VM-Enter failures detected by H/W") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Message-Id: <20210607175748.674002-1-seanjc@google.com>
2021-02-04KVM: x86/xen: intercept xen hypercalls if enabledJoao Martins1-0/+36
Add a new exit reason for emulator to handle Xen hypercalls. Since this means KVM owns the ABI, dispense with the facility for the VMM to provide its own copy of the hypercall pages; just fill them in directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page. This behaviour is enabled by a new INTERCEPT_HCALL flag in the KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag being returned from the KVM_CAP_XEN_HVM check. Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it to the nascent xen.c while we're at it, and add a test case. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2021-02-04KVM: x86: use static calls to reduce kvm_x86_ops overheadJason Baron1-2/+2
Convert kvm_x86_ops to use static calls. Note that all kvm_x86_ops are covered here except for 'pmu_ops and 'nested ops'. Here are some numbers running cpuid in a loop of 1 million calls averaged over 5 runs, measured in the vm (lower is better). Intel Xeon 3000MHz: |default |mitigations=off ------------------------------------- vanilla |.671s |.486s static call|.573s(-15%)|.458s(-6%) AMD EPYC 2500MHz: |default |mitigations=off ------------------------------------- vanilla |.710s |.609s static call|.664s(-6%) |.609s(0%) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Message-Id: <e057bf1b8a7ad15652df6eeba3f907ae758d3399.1610680941.git.jbaron@akamai.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15KVM: SVM: Create trace events for VMGEXIT MSR protocol processingTom Lendacky1-0/+44
Add trace events for entry to and exit from VMGEXIT MSR protocol processing. The vCPU will be common for the trace events. The MSR protocol processing is guided by the GHCB GPA in the VMCB, so the GHCB GPA will represent the input and output values for the entry and exit events, respectively. Additionally, the exit event will contain the return code for the event. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <c5b3b440c3e0db43ff2fc02813faa94fa54896b0.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15KVM: SVM: Create trace events for VMGEXIT processingTom Lendacky1-0/+53
Add trace events for entry to and exit from VMGEXIT processing. The vCPU id and the exit reason will be common for the trace events. The exit info fields will represent the input and output values for the entry and exit events, respectively. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <25357dca49a38372e8f483753fb0c1c2a70a6898.1607620209.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Use common definition for kvm_nested_vmexit tracepointSean Christopherson1-33/+1
Use the newly introduced TRACE_EVENT_KVM_EXIT to define the guts of kvm_nested_vmexit so that it captures and prints the same information as kvm_exit. This has the bonus side effect of fixing the interrupt info and error code printing for the case where they're invalid, e.g. if the exit was a failed VM-Entry. This also sets the stage for retrieving EXIT_QUALIFICATION and VM_EXIT_INTR_INFO in nested_vmx_reflect_vmexit() if and only if the VM-Exit is being routed to L1. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923201349.16097-7-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Add macro wrapper for defining kvm_exit tracepointSean Christopherson1-33/+36
Macrofy the definition of kvm_exit so that the definition can be reused verbatim by kvm_nested_vmexit. No functional change intended. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923201349.16097-6-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Add intr/vectoring info and error code to kvm_exit tracepointSean Christopherson1-3/+9
Extend the kvm_exit tracepoint to align it with kvm_nested_vmexit in terms of what information is captured. On SVM, add interrupt info and error code, while on VMX it add IDT vectoring and error code. This sets the stage for macrofying the kvm_exit tracepoint definition so that it can be reused for kvm_nested_vmexit without loss of information. Opportunistically stuff a zero for VM_EXIT_INTR_INFO if the VM-Enter failed, as the field is guaranteed to be invalid. Note, it'd be possible to further filter the interrupt/exception fields based on the VM-Exit reason, but the helper is intended only for tracepoints, i.e. an extra VMREAD or two is a non-issue, the failed VM-Enter case is just low hanging fruit. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923201349.16097-5-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Read guest RIP from within the kvm_nested_vmexit tracepointSean Christopherson1-3/+3
Use kvm_rip_read() to read the guest's RIP for the nested VM-Exit tracepoint instead of having the caller pass in an argument. Params that are passed into a tracepoint are evaluated even if the tracepoint is disabled, i.e. passing in RIP for VMX incurs a VMREAD and retpoline to retrieve a value that may never be used, e.g. if the exit is due to a hardware interrupt. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923201349.16097-3-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: x86: Add RIP to the kvm_entry, i.e. VM-Enter, tracepointSean Christopherson1-4/+6
Add RIP to the kvm_entry tracepoint to help debug if the kvm_exit tracepoint is disabled or if VM-Enter fails, in which case the kvm_exit tracepoint won't be hit. Read RIP from within the tracepoint itself to avoid a potential VMREAD and retpoline if the guest's RIP isn't available. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923201349.16097-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: SVM: Add new intercept word in vmcb_control_areaBabu Moger1-5/+8
The new intercept bits have been added in vmcb control area to support few more interceptions. Here are the some of them. - INTERCEPT_INVLPGB, - INTERCEPT_INVLPGB_ILLEGAL, - INTERCEPT_INVPCID, - INTERCEPT_MCOMMIT, - INTERCEPT_TLBSYNC, Add a new intercept word in vmcb_control_area to support these instructions. Also update kvm_nested_vmrun trace function to support the new addition. AMD documentation for these instructions is available at "AMD64 Architecture Programmer’s Manual Volume 2: System Programming, Pub. 24593 Rev. 3.34(or later)" The documentation can be obtained at the links below: Link: https://www.amd.com/system/files/TechDocs/24593.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <159985251547.11252.16994139329949066945.stgit@bmoger-ubuntu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28KVM: SVM: Modify 64 bit intercept field to two 32 bit vectorsBabu Moger1-7/+11
Convert all the intercepts to one array of 32 bit vectors in vmcb_control_area. This makes it easy for future intercept vector additions. Also update trace functions. Signed-off-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <159985250813.11252.5736581193881040525.stgit@bmoger-ubuntu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-01x86/kvm/hyper-v: Add support for synthetic debugger interfaceJon Doron1-0/+51
Add support for Hyper-V synthetic debugger (syndbg) interface. The syndbg interface is using MSRs to emulate a way to send/recv packets data. The debug transport dll (kdvm/kdnet) will identify if Hyper-V is enabled and if it supports the synthetic debugger interface it will attempt to use it, instead of trying to initialize a network adapter. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200529134543.1127440-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15KVM: x86: Print symbolic names of VMX VM-Exit flags in tracesSean Christopherson1-15/+17
Use __print_flags() to display the names of VMX flags in VM-Exit traces and strip the flags when printing the basic exit reason, e.g. so that a failed VM-Entry due to invalid guest state gets recorded as "INVALID_STATE FAILED_VMENTRY" instead of "0x80000021". Opportunstically fix misaligned variables in the kvm_exit and kvm_nested_vmexit_inject tracepoints. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200508235348.19427-3-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-13/+37
Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...
2020-03-31KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirectionSean Christopherson1-2/+2
Replace the kvm_x86_ops pointer in common x86 with an instance of the struct to save one pointer dereference when invoking functions. Copy the struct by value to set the ops during kvm_init(). Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the ops have been initialized, i.e. a vendor KVM module has been loaded. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-18KVM: x86: Add blurb to CPUID tracepoint when using max basic leaf valuesSean Christopherson1-4/+7
Tack on "used max basic" at the end of the CPUID tracepoint when the output values correspond to the max basic leaf, i.e. when emulating Intel's out-of-range CPUID behavior. Observing "cpuid entry not found" in the tracepoint with non-zero output values is confusing for users that aren't familiar with the out-of-range semantics, and qualifying the "not found" case hopefully makes it clear that "found" means "found the exact entry". Suggested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-18KVM: x86: Add requested index to the CPUID tracepointSean Christopherson1-5/+8
Output the requested index when tracing CPUID emulation; it's basically mandatory for leafs where the index is meaningful, and is helpful for verifying KVM correctness even when the index isn't meaningful, e.g. the trace for a Linux guest's hypervisor_cpuid_base() probing appears to be broken (returns all zeroes) at first glance, but is correct because the index is non-zero, i.e. the output values correspond to a random index in the maximum basic leaf. Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16kvm: svm: Introduce GA Log tracepoint for AVICSuravee Suthikulpanit1-0/+18
GA Log tracepoint is useful when debugging AVIC performance issue as it can be used with perf to count the number of times IOMMU AVIC injects interrupts through the slow-path instead of directly inject interrupts to the target vcpu. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16KVM: x86: Dynamically allocate per-vCPU emulation contextSean Christopherson1-5/+5
Allocate the emulation context instead of embedding it in struct kvm_vcpu_arch. Dynamic allocation provides several benefits: - Shrinks the size x86 vcpus by ~2.5k bytes, dropping them back below the PAGE_ALLOC_COSTLY_ORDER threshold. - Allows for dropping the include of kvm_emulate.h from asm/kvm_host.h and moving kvm_emulate.h into KVM's private directory. - Allows a reducing KVM's attack surface by shrinking the amount of vCPU data that is exposed to usercopy. - Allows a future patch to disable the emulator entirely, which may or may not be a realistic endeavor. Mark the entire struct as valid for usercopy to maintain existing behavior with respect to hardened usercopy. Future patches can shrink the usercopy range to cover only what is necessary. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-17x86/vdso: Use generic VDSO clock mode storageThomas Gleixner1-2/+2
Switch to the generic VDSO clock mode storage. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> (VDSO parts) Acked-by: Juergen Gross <jgross@suse.com> (Xen parts) Acked-by: Paolo Bonzini <pbonzini@redhat.com> (KVM parts) Link: https://lkml.kernel.org/r/20200207124403.152039903@linutronix.de
2020-02-05kvm: x86: Add APICv (de)activate request trace pointsSuravee Suthikulpanit1-0/+19
Add trace points when sending request to (de)activate APICv. Suggested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-11KVM: nVMX: trace nested VM-Enter failures detected by H/WSean Christopherson1-3/+6
Use the recently added tracepoint for logging nested VM-Enter failures instead of spamming the kernel log when hardware detects a consistency check failure. Take the opportunity to print the name of the error code instead of dumping the raw hex number, but limit the symbol table to error codes that can reasonably be encountered by KVM. Add an equivalent tracepoint in nested_vmx_check_vmentry_hw(), e.g. so that tracing of "invalid control field" errors isn't suppressed when nested early checks are enabled. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-11KVM: nVMX: add tracepoint for failed nested VM-EnterSean Christopherson1-0/+18
Debugging a failed VM-Enter is often like searching for a needle in a haystack, e.g. there are over 80 consistency checks that funnel into the "invalid control field" error code. One way to expedite debug is to run the buggy code as an L1 guest under KVM (and pray that the failing check is detected by KVM). However, extracting useful debug information out of L0 KVM requires attaching a debugger to KVM and/or modifying the source, e.g. to log which check is failing. Make life a little less painful for VMM developers and add a tracepoint for failed VM-Enter consistency checks. Ideally the tracepoint would capture both what check failed and precisely why it failed, but logging why a checked failed is difficult to do in a generic tracepoint without resorting to invasive techniques, e.g. generating a custom string on failure. That being said, for the vast majority of VM-Enter failures the most difficult step is figuring out exactly what to look at, e.g. figuring out which bit was incorrectly set in a control field is usually not too painful once the guilty field as been identified. To reach a happy medium between precision and ease of use, simply log the code that detected a failed check, using a macro to execute the check and log the trace event on failure. This approach enables tracing arbitrary code, e.g. it's not limited to function calls or specific formats of checks, and the changes to the existing code are minimally invasive. A macro with a two-character name is desirable as usage of the macro doesn't result in overly long lines or confusing alignment, while still retaining some amount of readability. I.e. a one-character name is a little too terse, and a three-character name results in the contents being passed to the macro aligning with an indented line when the macro is used an in if-statement, e.g.: if (VCC(nested_vmx_check_long_line_one(...) && nested_vmx_check_long_line_two(...))) return -EINVAL; And that is the story of how the CC(), a.k.a. Consistency Check, macro got its name. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: X86: Tune PLE Window tracepointPeter Xu1-16/+6
The PLE window tracepoint triggers even if the window is not changed, and the wording can be a bit confusing too. One example line: kvm_ple_window: vcpu 0: ple_window 4096 (shrink 4096) It easily let people think of "the window now is 4096 which is shrinked", but the truth is the value actually didn't change (4096). Let's only dump this message if the value really changed, and we make the message even simpler like: kvm_ple_window: vcpu 4 old 4096 new 8192 (growed) Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: VMX: Change ple_window type to unsigned intPeter Xu1-4/+5
The VMX ple_window is 32 bits wide, so logically it can overflow with an int. The module parameter is declared as unsigned int which is good, however the dynamic variable is not. Switching all the ple_window references to use unsigned int. The tracepoint changes will also affect SVM, but SVM is using an even smaller width (16 bits) so it's always fine. Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: X86: Remove tailing newline for tracepointsPeter Xu1-2/+2
It's done by TP_printk() already. Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: X86: Trace vcpu_id for vmexitPeter Xu1-1/+4
Tracing the ID helps to pair vmenters and vmexits for guests with multiple vCPUs. Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-22KVM: X86: Add pv tlb shootdown tracepointWanpeng Li1-0/+19
Add pv tlb shootdown tracepoint. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 15:12:28 +0300