Age | Commit message (Collapse) | Author | Files | Lines |
|
Use this_cpu_ptr() instead of open coding the equivalent in various
user return MSR helpers.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240802201630.339306-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is enough to return 0 if a guest need not do any preparation.
This is in fact how sev_gmem_prepare() works for non-SNP guests,
and it extends naturally to Intel hosts: the x86 callback for
gmem_prepare is optional and returns 0 if not defined.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_PRE_FAULT_MEMORY for an SNP guest can race with
sev_gmem_post_populate() in bad ways. The following sequence for
instance can potentially trigger an RMP fault:
thread A, sev_gmem_post_populate: called
thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP
thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i);
thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE);
RMP #PF
Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's
initial private memory contents have been finalized via
KVM_SEV_SNP_LAUNCH_FINISH.
Beyond fixing this issue, it just sort of makes sense to enforce this,
since the KVM_PRE_FAULT_MEMORY documentation states:
"KVM maps memory as if the vCPU generated a stage-2 read page fault"
which sort of implies we should be acting on the same guest state that a
vCPU would see post-launch after the initial guest memory is all set up.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduces kvm_x86_call(), to streamline the usage of static calls of
kvm_x86_ops. The current implementation of these calls is verbose and
could lead to alignment challenges. This makes the code susceptible to
exceeding the "80 columns per single line of code" limit as defined in
the coding-style document. Another issue with the existing implementation
is that the addition of kvm_x86_ prefix to hooks at the static_call sites
hinders code readability and navigation. kvm_x86_call() is added to
improve code readability and maintainability, while adhering to the coding
style guidelines.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-3-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The use of static_call_cond() is essentially the same as static_call() on
x86 (e.g. static_call() now handles a NULL pointer as a NOP), so replace
it with static_call() to simplify the code.
Link: https://lore.kernel.org/all/3916caa1dcd114301a49beafa5030eca396745c1.1679456900.git.jpoimboe@kernel.org/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-2-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Reported-by: syzbot+2fb9f8ed752c01bc9a3f@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240712144841.1230591-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM VMX changes for 6.11
- Remove an unnecessary EPT TLB flush when enabling hardware.
- Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
- Misc cleanups
|
|
KVM x86/pmu changes for 6.11
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
|
|
KVM x86 MTRR virtualization removal
Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD
hack, and instead always honor guest PAT on CPUs that support self-snoop.
|
|
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
Wire KVM_PRE_FAULT_MEMORY ioctl to kvm_mmu_do_page_fault() to populate guest
memory. It can be called right after KVM_CREATE_VCPU creates a vCPU,
since at that point kvm_mmu_create() and kvm_init_mmu() are called and
the vCPU is ready to invoke the KVM page fault handler.
The helper function kvm_tdp_map_page() takes care of the logic to
process RET_PF_* return values and convert them to success or errno.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <9b866a0ae7147f96571c439e75429a03dcb659b6.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some variables allocated in kvm_arch_vcpu_ioctl are released when
the function exits, so there is no need to set GFP_KERNEL_ACCOUNT.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20240624012016.46133-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refine the macros which define maximum General Purpose (GP) and fixed
counter numbers.
Currently the macro KVM_INTEL_PMC_MAX_GENERIC is used to represent the
maximum supported General Purpose (GP) counter number ambiguously across
Intel and AMD platforms. This would cause issues if AMD begins to support
more GP counters than Intel.
Thus a bunch of new macros including vendor specific and vendor
independent are introduced to replace the old macros. The vendor
independent macros are used in x86 common code to hide vendor difference
and eliminate the ambiguity.
No logic changes are introduced in this patch.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-1-dapeng1.mi@linux.intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
WARN if a blocking vCPU is awakened by a valid wake event that KVM can't
inject, e.g. because KVM needs to complete a nested VM-enter, or needs to
re-inject an exception. For the nested VM-Enter case, KVM is supposed to
clear "nested_run_pending" if L1 puts L2 into HLT, i.e. entering HLT
"completes" the nested VM-Enter. And for already-injected exceptions, it
should be impossible for the vCPU to be in a blocking state if a VM-Exit
occurred while an exception was being vectored.
Link: https://lore.kernel.org/r/20240607172609.3205077-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Check for a Requested Virtual Interrupt, i.e. a virtual interrupt that is
pending delivery, in vmx_has_nested_events() and drop the one-off
kvm_x86_ops.guest_apic_has_interrupt() hook.
In addition to dropping a superfluous hook, this fixes a bug where KVM
would incorrectly treat virtual interrupts _for L2_ as always enabled due
to kvm_arch_interrupt_allowed(), by way of vmx_interrupt_blocked(),
treating IRQs as enabled if L2 is active and vmcs12 is configured to exit
on IRQs, i.e. KVM would treat a virtual interrupt for L2 as a valid wake
event based on L1's IRQ blocking status.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When requesting an immediate exit from L2 in order to inject a pending
event, do so only if the pending event actually requires manual injection,
i.e. if and only if KVM actually needs to regain control in order to
deliver the event.
Avoiding the "immediate exit" isn't simply an optimization, it's necessary
to make forward progress, as the "already expired" VMX preemption timer
trick that KVM uses to force a VM-Exit has higher priority than events
that aren't directly injected.
At present time, this is a glorified nop as all events processed by
vmx_has_nested_events() require injection, but that will not hold true in
the future, e.g. if there's a pending virtual interrupt in vmcs02.RVI.
I.e. if KVM is trying to deliver a virtual interrupt to L2, the expired
VMX preemption timer will trigger VM-Exit before the virtual interrupt is
delivered, and KVM will effectively hang the vCPU in an endless loop of
forced immediate VM-Exits (because the pending virtual interrupt never
goes away).
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
|
|
Sync pending posted interrupts to the IRR prior to re-scanning I/O APIC
routes, irrespective of whether the I/O APIC is emulated by userspace or
by KVM. If a level-triggered interrupt routed through the I/O APIC is
pending or in-service for a vCPU, KVM needs to intercept EOIs on said
vCPU even if the vCPU isn't the destination for the new routing, e.g. if
servicing an interrupt using the old routing races with I/O APIC
reconfiguration.
Commit fceb3a36c29a ("KVM: x86: ioapic: Fix level-triggered EOI and
userspace I/OAPIC reconfigure race") fixed the common cases, but
kvm_apic_pending_eoi() only checks if an interrupt is in the local
APIC's IRR or ISR, i.e. misses the uncommon case where an interrupt is
pending in the PIR.
Failure to intercept EOI can manifest as guest hangs with Windows 11 if
the guest uses the RTC as its timekeeping source, e.g. if the VMM doesn't
expose a more modern form of time to the guest.
Cc: stable@vger.kernel.org
Cc: Adamos Ttofari <attofari@amazon.de>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240611014845.82795-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run
loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit
was not set.
Replace all references to vcpu->run->immediate_exit with
!vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a
malicious userspace could invoked KVM_RUN with immediate_exit=true and
then after KVM reads it to set wants_to_run=false, flip it to false.
This would result in the vCPU running in KVM_RUN with
wants_to_run=false. This wouldn't cause any real bugs today but is a
dangerous landmine.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If the BSP vCPU ID was already set, ensure it doesn't get excluded when
limiting vCPU IDs via KVM_CAP_MAX_VCPU_ID.
[mks: provide commit message, code by Sean]
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-4-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Do not accept IDs which are definitely invalid by limit checking the
passed value against KVM_MAX_VCPU_IDS and 'max_vcpu_ids' if it was
already set.
This ensures invalid values, especially on 64-bit systems, don't go
unnoticed and lead to a valid id by chance when truncated by the final
assignment.
Fixes: 73880c80aa9c ("KVM: Break dependency between vcpu index in vcpus array and vcpu_id.")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-3-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM unconditionally sets l1tf_flush_l1d in kvm_arch_vcpu_load(),
drop the redundant store from vcpu_run(). The flag is cleared only when
VM-Enter is imminent, deep below vcpu_run(), i.e. barring a KVM bug, it's
impossible for l1tf_flush_l1d to be cleared between loading the vCPU and
calling vcpu_run().
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Always set l1tf_flush_l1d during kvm_arch_vcpu_load() instead of setting
it only when the vCPU is being scheduled back in. The flag is processed
only when VM-Enter is imminent, and KVM obviously needs to load the vCPU
before VM-Enter, so attempting to precisely set l1tf_flush_l1d provides no
meaningful value. I.e. the flag _will_ be set either way, it's simply a
matter of when.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Delete kvm_arch_sched_in() now that all implementations are nops.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fold the guts of kvm_arch_sched_in() into kvm_arch_vcpu_load(), keying
off the recently added kvm_vcpu.scheduled_out as appropriate.
Note, there is a very slight functional change, as PLE shrink updates will
now happen after blasting WBINVD, but that is quite uninteresting as the
two operations do not interact in any way.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM sets up empty IRQ routing during VM creation, don't recreate
empty routing during KVM_CAP_SPLIT_IRQCHIP. Setting IRQ routes during
KVM_CAP_SPLIT_IRQCHIP can result in 20+ milliseconds of delay due to the
synchronize_srcu_expedited() call in kvm_set_irq_routing().
Note, the empty routing is guaranteed to be intact as KVM x86 only allows
changing the IRQ routing after an in-kernel IRQCHIP has been created, and
KVM_CAP_SPLIT_IRQCHIP is disallowed after creating an IRQCHIP.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Link: https://lore.kernel.org/r/20240506101751.3145407-3-foxywang@tencent.com
[sean: massage changelog, remove unused empty_routing array]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When a vCPU is interrupted by a signal while running a nested guest,
KVM will exit to userspace with L2 state. However, userspace has no
way to know whether it sees L1 or L2 state (besides calling
KVM_GET_STATS_FD, which does not have a stable ABI).
This causes multiple problems:
The simplest one is L2 state corruption when userspace marks the sregs
as dirty. See this mailing list thread [1] for a complete discussion.
Another problem is that if userspace decides to continue by emulating
instructions, it will unknowingly emulate with L2 state as if L1
doesn't exist, which can be considered a weird guest escape.
Introduce a new flag, KVM_RUN_X86_GUEST_MODE, in the kvm_run data
structure, which is set when the vCPU exited while running a nested
guest. Also introduce a new capability, KVM_CAP_X86_GUEST_MODE, to
advertise the functionality to userspace.
[1] https://lore.kernel.org/kvm/20240416123558.212040-1-julian.stecklina@cyberus-technology.de/T/#m280aadcb2e10ae02c191a7dc4ed4b711a74b1f55
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Link: https://lore.kernel.org/r/20240508132502.184428-1-julian.stecklina@cyberus-technology.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use guest_cpuid_is_intel_compatible() to determine whether SYSCALL in
32-bit Protected Mode (including Compatibility Mode) should #UD or succeed.
The existing code already does the exact equivalent of
guest_cpuid_is_intel_compatible(), just in a rather roundabout way.
No functional change intended.
Link: https://lore.kernel.org/r/20240405235603.1173076-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Treat code #DBs as inhibited in MOV/POP-SS shadows for vCPU models that
are Intel compatible, not just strictly vCPUs with vendor==Intel. The
behavior is explicitly called out in the SDM, and thus architectural, i.e.
applies to all CPUs that implement Intel's architecture, and isn't a quirk
that is unique to CPUs manufactured by Intel:
However, if an instruction breakpoint is placed on an instruction located
immediately after a POP SS/MOV SS instruction, the breakpoint will be
suppressed as if EFLAGS.RF were 1.
Applying the behavior strictly to Intel wasn't intentional, KVM simply
didn't have a concept of "Intel compatible" as of commit baf67ca8e545
("KVM: x86: Suppress code #DBs on Intel if MOV/POP SS blocking is active").
Link: https://lore.kernel.org/r/20240405235603.1173076-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend Intel's check on MSR_TSC_AUX[63:32] to all vCPU models that are
Intel compatible, i.e. aren't AMD or Hygon in KVM's world, as the behavior
is architectural, i.e. applies to any CPU that is compatible with Intel's
architecture. Applying the behavior strictly to Intel wasn't intentional,
KVM simply didn't have a concept of "Intel compatible" as of commit
61a05d444d2c ("KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to
guest CPU model").
Link: https://lore.kernel.org/r/20240405235603.1173076-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Ensure a full memory barrier is emitted in the VM-Exit path, as a full
barrier is required on Intel CPUs to evict WC buffers. This will allow
unconditionally honoring guest PAT on Intel CPUs that support self-snoop.
As srcu_read_lock() is always called in the VM-Exit path and it internally
has a smp_mb(), call smp_mb__after_srcu_read_lock() to avoid adding a
second fence and make sure smp_mb() is called without dependency on
implementation details of srcu_read_lock().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
[sean: massage changelog]
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240309010929.1403984-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop KVM's emulation of CR0.CD=1 on Intel CPUs now that KVM no longer
honors guest MTRR memtypes, as forcing UC memory for VMs with
non-coherent DMA only makes sense if the guest is using something other
than PAT to configure the memtype for the DMA region.
Furthermore, KVM has forced WB memory for CR0.CD=1 since commit
fb279950ba02 ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED"), and no known
VMM in existence disables KVM_X86_QUIRK_CD_NW_CLEARED, let alone does
so with non-coherent DMA.
Lastly, commit fb279950ba02 ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED") was
from the same author as commit b18d5431acc7 ("KVM: x86: fix CR0.CD
virtualization"), and followed by a mere month. I.e. forcing UC memory
was likely the result of code inspection or perhaps misdiagnosed failures,
and not the necessitate by a concrete use case.
Update KVM's documentation to note that KVM_X86_QUIRK_CD_NW_CLEARED is now
AMD-only, and to take an erratum for lack of CR0.CD virtualization on
Intel.
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240309010929.1403984-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove KVM's support for virtualizing guest MTRR memtypes, as full MTRR
adds no value, negatively impacts guest performance, and is a maintenance
burden due to it's complexity and oddities.
KVM's approach to virtualizating MTRRs make no sense, at all. KVM *only*
honors guest MTRR memtypes if EPT is enabled *and* the guest has a device
that may perform non-coherent DMA access. From a hardware virtualization
perspective of guest MTRRs, there is _nothing_ special about EPT. Legacy
shadowing paging doesn't magically account for guest MTRRs, nor does NPT.
Unwinding and deciphering KVM's murky history, the MTRR virtualization
code appears to be the result of misdiagnosed issues when EPT + VT-d with
passthrough devices was enabled years and years ago. And importantly, the
underlying bugs that were fudged around by honoring guest MTRR memtypes
have since been fixed (though rather poorly in some cases).
The zapping GFNs logic in the MTRR virtualization code came from:
commit efdfe536d8c643391e19d5726b072f82964bfbdb
Author: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Date: Wed May 13 14:42:27 2015 +0800
KVM: MMU: fix MTRR update
Currently, whenever guest MTRR registers are changed
kvm_mmu_reset_context is called to switch to the new root shadow page
table, however, it's useless since:
1) the cache type is not cached into shadow page's attribute so that
the original root shadow page will be reused
2) the cache type is set on the last spte, that means we should sync
the last sptes when MTRR is changed
This patch fixs this issue by drop all the spte in the gfn range which
is being updated by MTRR
which was a fix for:
commit 0bed3b568b68e5835ef5da888a372b9beabf7544
Author: Sheng Yang <sheng@linux.intel.com>
AuthorDate: Thu Oct 9 16:01:54 2008 +0800
Commit: Avi Kivity <avi@redhat.com>
CommitDate: Wed Dec 31 16:51:44 2008 +0200
KVM: Improve MTRR structure
As well as reset mmu context when set MTRR.
which was part of a "MTRR/PAT support for EPT" series that also added:
+ if (mt_mask) {
+ mt_mask = get_memory_type(vcpu, gfn) <<
+ kvm_x86_ops->get_mt_mask_shift();
+ spte |= mt_mask;
+ }
where get_memory_type() was a truly gnarly helper to retrieve the guest
MTRR memtype for a given memtype. And *very* subtly, at the time of that
change, KVM *always* set VMX_EPT_IGMT_BIT,
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT |
VMX_EPT_IGMT_BIT);
which came in via:
commit 928d4bf747e9c290b690ff515d8f81e8ee226d97
Author: Sheng Yang <sheng@linux.intel.com>
AuthorDate: Thu Nov 6 14:55:45 2008 +0800
Commit: Avi Kivity <avi@redhat.com>
CommitDate: Tue Nov 11 21:00:37 2008 +0200
KVM: VMX: Set IGMT bit in EPT entry
There is a potential issue that, when guest using pagetable without vmexit when
EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory,
which would be inconsistent with host side and would cause host MCE due to
inconsistent cache attribute.
The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default
memory type to protect host (notice that all memory mapped by KVM should be WB).
Note the CommitDates! The AuthorDates strongly suggests Sheng Yang added
the whole "ignoreIGMT things as a bug fix for issues that were detected
during EPT + VT-d + passthrough enabling, but it was applied earlier
because it was a generic fix.
Jumping back to 0bed3b568b68 ("KVM: Improve MTRR structure"), the other
relevant code, or rather lack thereof, is the handling of *host* MMIO.
That fix came in a bit later, but given the author and timing, it's safe
to say it was all part of the same EPT+VT-d enabling mess.
commit 2aaf69dcee864f4fb6402638dd2f263324ac839f
Author: Sheng Yang <sheng@linux.intel.com>
AuthorDate: Wed Jan 21 16:52:16 2009 +0800
Commit: Avi Kivity <avi@redhat.com>
CommitDate: Sun Feb 15 02:47:37 2009 +0200
KVM: MMU: Map device MMIO as UC in EPT
Software are not allow to access device MMIO using cacheable memory type, the
patch limit MMIO region with UC and WC(guest can select WC using PAT and
PCD/PWT).
In addition to the host MMIO and IGMT issues, KVM's MTRR virtualization
was obviously never tested on NPT until much later, which lends further
credence to the theory/argument that this was all the result of
misdiagnosed issues.
Discussion from the EPT+MTRR enabling thread[*] more or less confirms that
Sheng Yang was trying to resolve issues with passthrough MMIO.
* Sheng Yang
: Do you mean host(qemu) would access this memory and if we set it to guest
: MTRR, host access would be broken? We would cover this in our shadow MTRR
: patch, for we encountered this in video ram when doing some experiment with
: VGA assignment.
And in the same thread, there's also what appears to be confirmation of
Intel running into issues with Windows XP related to a guest device driver
mapping DMA with WC in the PAT.
* Avi Kavity
: Sheng Yang wrote:
: > Yes... But it's easy to do with assigned devices' mmio, but what if guest
: > specific some non-mmio memory's memory type? E.g. we have met one issue in
: > Xen, that a assigned-device's XP driver specific one memory region as buffer,
: > and modify the memory type then do DMA.
: >
: > Only map MMIO space can be first step, but I guess we can modify assigned
: > memory region memory type follow guest's?
: >
:
: With ept/npt, we can't, since the memory type is in the guest's
: pagetable entries, and these are not accessible.
[*] https://lore.kernel.org/all/1223539317-32379-1-git-send-email-sheng@linux.intel.com
So, for the most part, what likely happened is that 15 years ago, a few
engineers (a) fixed a #MC problem by ignoring guest PAT and (b) initially
"fixed" passthrough device MMIO by emulating *guest* MTRRs. Except for
the below case, everything since then has been a result of those two
intertwined changes.
The one exception, which is actually yet more confirmation of all of the
above, is the revert of Paolo's attempt at "full" virtualization of guest
MTRRs:
commit 606decd67049217684e3cb5a54104d51ddd4ef35
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Oct 1 13:12:47 2015 +0200
Revert "KVM: x86: apply guest MTRR virtualization on host reserved pages"
This reverts commit fd717f11015f673487ffc826e59b2bad69d20fe5.
It was reported to cause Machine Check Exceptions (bug 104091).
...
commit fd717f11015f673487ffc826e59b2bad69d20fe5
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jul 7 14:38:13 2015 +0200
KVM: x86: apply guest MTRR virtualization on host reserved pages
Currently guest MTRR is avoided if kvm_is_reserved_pfn returns true.
However, the guest could prefer a different page type than UC for
such pages. A good example is that pass-throughed VGA frame buffer is
not always UC as host expected.
This patch enables full use of virtual guest MTRRs.
I.e. Paolo tried to add back KVM's behavior before "Map device MMIO as UC
in EPT" and got the same result: machine checks, likely due to the guest
MTRRs not being trustworthy/sane at all times.
Note, Paolo also tried to enable MTRR virtualization on SVM+NPT, but that
too got reverted. Unfortunately, it doesn't appear that anyone ever found
a smoking gun, i.e. exactly why emulating guest MTRRs via NPT PAT caused
extremely slow boot times doesn't appear to have a definitive root cause.
commit fc07e76ac7ffa3afd621a1c3858a503386a14281
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Oct 1 13:20:22 2015 +0200
Revert "KVM: SVM: use NPT page attributes"
This reverts commit 3c2e7f7de3240216042b61073803b61b9b3cfb22.
Initializing the mapping from MTRR to PAT values was reported to
fail nondeterministically, and it also caused extremely slow boot
(due to caching getting disabled---bug 103321) with assigned devices.
...
commit 3c2e7f7de3240216042b61073803b61b9b3cfb22
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jul 7 14:32:17 2015 +0200
KVM: SVM: use NPT page attributes
Right now, NPT page attributes are not used, and the final page
attribute depends solely on gPAT (which however is not synced
correctly), the guest MTRRs and the guest page attributes.
However, we can do better by mimicking what is done for VMX.
In the absence of PCI passthrough, the guest PAT can be ignored
and the page attributes can be just WB. If passthrough is being
used, instead, keep respecting the guest PAT, and emulate the guest
MTRRs through the PAT field of the nested page tables.
The only snag is that WP memory cannot be emulated correctly,
because Linux's default PAT setting only includes the other types.
In short, honoring guest MTRRs for VMX was initially a workaround of
sorts for KVM ignoring guest PAT *and* for KVM not forcing UC for host
MMIO. And while there *are* known cases where honoring guest MTRRs is
desirable, e.g. passthrough VGA frame buffers, the desired behavior in
that case is to get WC instead of UC, i.e. at this point it's for
performance, not correctness.
Furthermore, the complete absence of MTRR virtualization on NPT and
shadow paging proves that, while KVM theoretically can do better, it's
by no means necessary for correctnesss.
Lastly, since kernels mostly rely on firmware to do MTRR setup, and the
host typically provides guest firmware, honoring guest MTRRs is effectively
honoring *host* userspace memtypes, which is also backwards. I.e. it
would be far better for host userspace to communicate its desired memtype
directly to KVM (or perhaps indirectly via VMAs in the host kernel), not
through guest MTRRs.
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240309010929.1403984-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Keep kvm_apicv_inhibit enum naming consistent with the current pattern by
renaming the reason/enumerator defined as APICV_INHIBIT_REASON_DISABLE to
APICV_INHIBIT_REASON_DISABLED.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-3-alejandro.j.jimenez@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the tracing infrastructure helper __print_flags() for printing flag
bitfields, to enhance the trace output by displaying a string describing
each of the inhibit reasons set.
The kvm_apicv_inhibit_changed tracepoint currently shows the raw bitmap
value, requiring the user to consult the source file where the inhibit
reasons are defined to decode the trace output.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-2-alejandro.j.jimenez@oracle.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add KVM_CAP_X86_APIC_BUS_CYCLES_NS capability to configure the APIC
bus clock frequency for APIC timer emulation.
Allow KVM_ENABLE_CAPABILITY(KVM_CAP_X86_APIC_BUS_CYCLES_NS) to set the
frequency in nanoseconds. When using this capability, the user space
VMM should configure CPUID leaf 0x15 to advertise the frequency.
Vishal reported that the TDX guest kernel expects a 25MHz APIC bus
frequency but ends up getting interrupts at a significantly higher rate.
The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.
In addition, per Intel SDM:
"The APIC timer frequency will be the processor’s bus clock or core
crystal clock frequency (when TSC/core crystal clock ratio is
enumerated in CPUID leaf 0x15) divided by the value specified in
the divide configuration register."
The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.
The KVM doesn't enumerate CPUID leaf 0x15 to the guest unless the user
space VMM sets it using KVM_SET_CPUID. If the CPUID leaf 0x15 is
enumerated, the guest kernel uses it as the APIC bus frequency. If not,
the guest kernel measures the frequency based on other known timers like
the ACPI timer or the legacy PIT. As reported by Vishal the TDX guest
kernel expects a 25MHz timer frequency but gets timer interrupt more
frequently due to the 1GHz frequency used by KVM.
To ensure that the guest doesn't have a conflicting view of the APIC bus
frequency, allow the userspace to tell KVM to use the same frequency that
TDX mandates instead of the default 1Ghz.
Reported-by: Vishal Annapurve <vannapurve@google.com>
Closes: https://lore.kernel.org/lkml/20231006011255.4163884-1-vannapurve@google.com
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/6748a4c12269e756f0c48680da8ccc5367c31ce7.1714081726.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Introduce the VM variable "nanoseconds per APIC bus cycle" in
preparation to make the APIC bus frequency configurable.
The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.
In addition, per Intel SDM:
"The APIC timer frequency will be the processor’s bus clock or core
crystal clock frequency (when TSC/core crystal clock ratio is
enumerated in CPUID leaf 0x15) divided by the value specified in
the divide configuration register."
The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.
Introduce the VM variable "nanoseconds per APIC bus cycle" to prepare
for allowing userspace to tell KVM to use the frequency that TDX mandates
instead of the default 1Ghz. Doing so ensures that the guest doesn't have
a conflicting view of the APIC bus frequency.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
[reinette: rework changelog]
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/ae75ce37c6c38bb4efd10a0a41932984c40b24ac.1714081726.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth:
* add some basic infrastructure and introduces a new KVM_X86_SNP_VM
vm_type to handle differences versus the existing KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM types.
* implement the KVM API to handle the creation of a cryptographic
launch context, encrypt/measure the initial image into guest memory,
and finalize it before launching it.
* implement handling for various guest-generated events such as page
state changes, onlining of additional vCPUs, etc.
* implement the gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges as well as
cleaning them up prior to returning them to the host for use as
normal memory. Because those cleanup hooks supplant certain
activities like issuing WBINVDs during KVM MMU invalidations, avoid
duplicating that work to avoid unecessary overhead.
This merge leaves out support support for attestation guest requests
and for loading the signing keys to be used for attestation requests.
|
|
Remove support for specifying a static local APIC timer advancement value,
and instead present a read-only boolean parameter to let userspace enable
or disable KVM's dynamic APIC timer advancement. Realistically, it's all
but impossible for userspace to specify an advancement that is more
precise than what KVM's adaptive tuning can provide. E.g. a static value
needs to be tuned for the exact hardware and kernel, and if KVM is using
hrtimers, likely requires additional tuning for the exact configuration of
the entire system.
Dropping support for a userspace provided value also fixes several flaws
in the interface. E.g. KVM interprets a negative value other than -1 as a
large advancement, toggling between a negative and positive value yields
unpredictable behavior as vCPUs will switch from dynamic to static
advancement, changing the advancement in the middle of VM creation can
result in different values for vCPUs within a VM, etc. Those flaws are
mostly fixable, but there's almost no justification for taking on yet more
complexity (it's minimal complexity, but still non-zero).
The only arguments against using KVM's adaptive tuning is if a setup needs
a higher maximum, or if the adjustments are too reactive, but those are
arguments for letting userspace control the absolute max advancement and
the granularity of each adjustment, e.g. similar to how KVM provides knobs
for halt polling.
Link: https://lore.kernel.org/all/20240520115334.852510-1-zhoushuling@huawei.com
Cc: Shuling Zhou <zhoushuling@huawei.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522010304.1650603-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This MSR reads as 0, and any host-initiated writes are ignored, so
there's no reason to enumerate it in KVM_GET_MSR_INDEX_LIST.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20231113184854.2344416-1-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add "struct kvm_host_values kvm_host" to hold the various host values
that KVM snapshots during initialization. Bundling the host values into
a single struct simplifies adding new MSRs and other features with host
state/values that KVM cares about, and provides a one-stop shop. E.g.
adding a new value requires one line, whereas tracking each value
individual often requires three: declaration, definition, and export.
No functional change intended.
Link: https://lore.kernel.org/r/20240423221521.2923759-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
This will handle the RMP table updates needed to put a page into a
private state before mapping it into an SEV-SNP guest.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-14-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for the SEV-SNP AP Creation NAE event. This allows SEV-SNP
guests to alter the register state of the APs on their own. This allows
the guest a way of simulating INIT-SIPI.
A new event, KVM_REQ_UPDATE_PROTECTED_GUEST_STATE, is created and used
so as to avoid updating the VMSA pointer while the vCPU is running.
For CREATE
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID. The GPA is saved in the svm struct of the
target vCPU, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is added
to the vCPU and then the vCPU is kicked.
For CREATE_ON_INIT:
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID the next time an INIT is performed. The GPA is
saved in the svm struct of the target vCPU.
For DESTROY:
The guest indicates it wishes to stop the vCPU. The GPA is cleared
from the svm struct, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is
added to vCPU and then the vCPU is kicked.
The KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event handler will be invoked
as a result of the event or as a result of an INIT. If a new VMSA is to
be installed, the VMSA guest page is set as the VMSA in the vCPU VMCB
and the vCPU state is set to KVM_MP_STATE_RUNNABLE. If a new VMSA is not
to be installed, the VMSA is cleared in the vCPU VMCB and the vCPU state
is set to KVM_MP_STATE_HALTED to prevent it from being run.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-13-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When SEV-SNP is enabled in the guest, the hardware places restrictions
on all memory accesses based on the contents of the RMP table. When
hardware encounters RMP check failure caused by the guest memory access
it raises the #NPF. The error code contains additional information on
the access type. See the APM volume 2 for additional information.
When using gmem, RMP faults resulting from mismatches between the state
in the RMP table vs. what the guest expects via its page table result
in KVM_EXIT_MEMORY_FAULTs being forwarded to userspace to handle. This
means the only expected case that needs to be handled in the kernel is
when the page size of the entry in the RMP table is larger than the
mapping in the nested page table, in which case a PSMASH instruction
needs to be issued to split the large RMP entry into individual 4K
entries so that subsequent accesses can succeed.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-12-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Common patches for the target-independent functionality and hooks
that are needed by SEV-SNP and TDX.
|
|
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.10
1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.
|
|
In some cases, like with SEV-SNP, guest memory needs to be updated in a
platform-specific manner before it can be safely freed back to the host.
Wire up arch-defined hooks to the .free_folio kvm_gmem_aops callback to
allow for special handling of this sort when freeing memory in response
to FALLOC_FL_PUNCH_HOLE operations and when releasing the inode, and go
ahead and define an arch-specific hook for x86 since it will be needed
for handling memory used for SEV-SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|