summaryrefslogtreecommitdiff
path: root/arch/x86/pci/acpi.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6FBjorn Helgaas1-0/+10
Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606 Reported-by: Martin Burnicki <martin.burnicki@meinberg.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2015-10-16x86/PCI/ACPI: Use common interface to support PCI host bridgeJiang Liu1-207/+87
Use common interface to simplify ACPI PCI host bridge implementation. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-16ACPI/PCI: Reset acpi_root_dev->domain to 0 when pci_ignore_seg is setJiang Liu1-1/+1
Reset acpi_root_dev->domain to 0 when pci_ignore_seg is set to keep consistence between ACPI PCI root device and PCI host bridge device. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-23Merge tag 'pci-v4.2-changes' of ↵Linus Torvalds1-2/+15
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.2 merge window: Enumeration - Move pci_ari_enabled() to global header (Alex Williamson) - Account for ARI in _PRT lookups (Alex Williamson) - Remove unused pci_scan_bus_parented() (Yijing Wang) Resource management - Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas) - Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas) - Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan) - Add pci_bus_addr_t (Yinghai Lu) PCI device hotplug - Wait for pciehp command completion where necessary (Alex Williamson) - Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki) - Check ignore_hotplug for all downstream devices (Rafael J. Wysocki) - Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki) - Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas) - Clean up pciehp debug logging (Bjorn Helgaas) Power management - Remove redundant PCIe port type checking (Yijing Wang) - Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang) - Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang) - Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas) - Simplify Clock Power Management setting (Bjorn Helgaas) Virtualization - Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus) MSI - Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin) - Remove unused pci_msi_off() (Bjorn Helgaas) - Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Drop pci_msi_off() calls during probe (Michael S. Tsirkin) APM X-Gene host bridge driver - Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang) - Add APM X-Gene PCIe MSI DTS nodes (Duc Dang) - Disable Configuration Request Retry Status for v1 silicon (Duc Dang) - Allow config access to Root Port even when link is down (Duc Dang) Broadcom iProc host bridge driver - Allow override of device tree IRQ mapping function (Hauke Mehrtens) - Add BCMA PCIe driver (Hauke Mehrtens) - Directly add PCI resources (Hauke Mehrtens) - Free resource list after registration (Hauke Mehrtens) Freescale i.MX6 host bridge driver - Add speed change timeout message (Troy Kisky) - Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas) Freescale Layerscape host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) - Factor out ls_pcie_establish_link() (Bjorn Helgaas) Marvell MVEBU host bridge driver - Remove mvebu_pcie_scan_bus() (Yijing Wang) NVIDIA Tegra host bridge driver - Remove tegra_pcie_scan_bus() (Yijing Wang) Synopsys DesignWare host bridge driver - Consolidate outbound iATU programming functions (Jisheng Zhang) - Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang) - Add support for x8 links (Zhou Wang) - Wait for link to come up with consistent style (Bjorn Helgaas) - Use pci_scan_root_bus() for simplicity (Yijing Wang) TI DRA7xx host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) Miscellaneous - Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas) - Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas) - Remove unused pcibios_select_root() (again) (Bjorn Helgaas) - Remove unused pci_dma_burst_advice() (Bjorn Helgaas) - xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)" * tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: pciehp: Inline the "handle event" functions into the ISR PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event() PCI: pciehp: Make queue_interrupt_event() void PCI: xgene: Allow config access to Root Port even when link is down PCI: xgene: Disable Configuration Request Retry Status for v1 silicon PCI: pciehp: Clean up debug logging x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing PCI: imx6: Add #define PCIE_RC_LCSR PCI: imx6: Use "u32", not "uint32_t" PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: imx6: Add speed change timeout message PCI/ASPM: Simplify Clock Power Management setting PCI: designware: Wait for link to come up with consistent style PCI: layerscape: Factor out ls_pcie_establish_link() PCI: layerscape: Use dw_pcie_link_up() consistently PCI: dra7xx: Use dw_pcie_link_up() consistently x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A PCI: pciehp: Wait for hotplug command completion where necessary PCI: Remove unused pci_dma_burst_advice() ...
2015-06-18x86/PCI: Use host bridge _CRS info on systems with >32 bit addressingBjorn Helgaas1-2/+4
We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI. After d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there. On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work. Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB. Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible") Reported-and-tested-by: Juan Dayer <jdayer@outlook.com> Reported-and-tested-by: Alan Horsfield <alan@hazelgarth.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+
2015-06-10x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237ABjorn Helgaas1-0/+11
The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign resources correctly without the information from _CRS that tells us which address ranges are claimed by which bridge. In the bugs mentioned below, we incorrectly assign a sound card address (this example is from 1033299): bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored) pci 0000:80:01.0: [1106:3288] type 0 class 0x000403 pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit] pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] BUG: unable to handle kernel paging request at ffffc90000378000 IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel] We assigned 0xfd_0000_0000, but that is not in any of the host bridge windows, and the sound card doesn't work. Turn on pci=use_crs automatically for this system. Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2015-05-28PCI / ACPI: Do not set ACPI companions for host bridges with parentsRafael J. Wysocki1-3/+10
Commit 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) uncovered a bug in the x86 (and ia64) PCI host bridge initialization code that assumes bridge->bus->sysdata to always point to a struct pci_sysdata object which need not be the case (in particular, the Xen PCI frontend driver sets it to point to a different data type). If it is not the case, an incorrect pointer (or a piece of data that is not a pointer at all) will be passed to ACPI_COMPANION_SET() and that may cause interesting breakage to happen going forward. To work around this problem use the observation that the ACPI host bridge initialization always passes NULL as parent to pci_create_root_bus(), so if pcibios_root_bridge_prepare() sees a non-NULL parent of the bridge, it should not attempt to set an ACPI companion for it, because that means that pci_create_root_bus() has been called by someone else. Fixes: 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-30x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI busJiang Liu1-2/+22
An IO port or MMIO resource assigned to a PCI host bridge may be consumed by the host bridge itself or available to its child bus/devices. The ACPI specification defines a bit (Producer/Consumer) to tell whether the resource is consumed by the host bridge itself, but firmware hasn't used that bit consistently, so we can't rely on it. Before commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored all IO port resources defined by acpi_resource_io and acpi_resource_fixed_io to filter out IO ports consumed by the host bridge itself. Commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation") started accepting all IO port and MMIO resources, which caused a regression that IO port resources consumed by the host bridge itself became available to its child devices. Then commit 63f1789ec716 ("x86/PCI/ACPI: Ignore resources consumed by host bridge itself") ignored resources consumed by the host bridge itself by checking the IORESOURCE_WINDOW flag, which accidently removed MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32 and acpi_resource_fixed_memory32. On x86 and IA64 platforms, all IO port and MMIO resources are assumed to be available to child bus/devices except one special case: IO port [0xCF8-0xCFF] is consumed by the host bridge itself to access PCI configuration space. So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution will also ease the way to consolidate ACPI PCI host bridge common code from x86, ia64 and ARM64. Related ACPI table are archived at: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Related discussions at: http://patchwork.ozlabs.org/patch/461633/ https://lkml.org/lkml/2015/3/29/304 Fixes: 63f1789ec716 (Ignore resources consumed by host bridge itself) Reported-by: Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04x86/PCI/ACPI: Ignore resources consumed by host bridge itselfJiang Liu1-3/+8
When parsing resources for PCI host bridge, we should ignore resources consumed by host bridge itself and only report window resources available to child PCI busses. Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementationJiang Liu1-204/+91
Use common ACPI resource discovery interfaces to simplify PCI host bridge resource enumeration. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05x86/PCI: Fix the range check for IO resourcesJiang Liu1-2/+4
The range check in setup_res() checks the IO range against iomem_resource. That's just wrong. Reworked based on Thomas original patch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-26ACPICA: Resources: Provide common part for struct acpi_resource_address ↵Lv Zheng1-13/+13
structures. struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts just at different offsets. To unify the parsing functions, OSPMs like Linux need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can extract the shared data. This patch also synchronizes the structure changes to the Linux kernel. The usages are searched by matching the following keywords: 1. acpi_resource_address 2. acpi_resource_extended_address 3. ACPI_RESOURCE_TYPE_ADDRESS 4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS And we found and fixed the usages in the following files: arch/ia64/kernel/acpi-ext.c arch/ia64/pci/pci.c arch/x86/pci/acpi.c arch/x86/pci/mmconfig-shared.c drivers/xen/xen-acpi-memhotplug.c drivers/acpi/acpi_memhotplug.c drivers/acpi/pci_root.c drivers/acpi/resource.c drivers/char/hpet.c drivers/pnp/pnpacpi/rsparser.c drivers/hv/vmbus_drv.c Build tests are passed with defconfig/allnoconfig/allyesconfig and defconfig+CONFIG_ACPI=n. Original-by: Thomas Gleixner <tglx@linutronix.de> Original-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-22x86, PCI, ACPI: Use kmalloc_node() to optimize for performanceJiang Liu1-3/+3
Use kmalloc_node() instead of kmalloc() when possible to optimize for performance on NUMA platforms. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-6-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-21x86/PCI: Warn if we have to "guess" host bridge node informationMyron Stowe1-1/+5
The vast majority of platforms are not supplying ACPI _PXM (proximity) information corresponding to host bridge (PNP0A03/PNP0A08) devices resulting in sysfs "numa_node" values of -1 (NUMA_NO_NODE): # for i in /sys/devices/pci0000\:00/*/numa_node; do cat $i; done | uniq -1 # find /sys/ -name "numa_node" | while read fname; do cat $fname; \ done | uniq -1 AMD based platforms provide a fall-back for this situation via amd_bus.c. These platforms snoop out the information by directly reading specific registers from the Northbridge and caching them via alloc_pci_root_info(). Later during boot processing when host bridges are discovered - pci_acpi_scan_root() - the kernel looks for their corresponding ACPI _PXM method - drivers/acpi/numa.c::acpi_get_node(). If the BIOS supplied a _PXM method then that node (proximity) value is associated. If the BIOS did not supply a _PXM method *and* the platform is AMD-based, the fall-back cached values obtained directly from the Northbridge are used; otherwise, "NUMA_NO_NODE" is associated. There are a number of issues with this fall-back mechanism the most notable being that amd_bus.c extracts a 3-bit number from a CPU register and uses it as the node number. The node numbers used by Linux are logical and there's no reason they need to be identical to settings in the CPU registers. So if we have some node information obtained in the normal way (from _PXM, SLIT, SRAT, etc.) and some from amd_bus.c, there's no reason to believe they will be compatible. This patch warns when this situation occurs: pci_root PNP0A08:00: [Firmware Bug]: no _PXM; falling back to node 0 from hardware (may be inconsistent with ACPI node numbers) Link: https://bugzilla.kernel.org/show_bug.cgi?id=72051 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-19Merge branch 'pci/misc' into nextBjorn Helgaas1-18/+12
* pci/misc: PCI: Enable INTx if BIOS left them disabled ia64/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device x86/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device PCI: Update outdated comment for pcibios_bus_report_status() PCI: Cleanup per-arch list of object files PCI: cpqphp: Fix hex vs decimal typo in cpqhpc_probe() x86/PCI: Fix function definition whitespace x86/PCI: Reword comments x86/PCI: Remove unnecessary local variable initialization PCI: Remove unnecessary list_empty(&pci_pme_list) check
2014-02-13x86/PCI: Fix function definition whitespaceBjorn Helgaas1-10/+7
Consistently put the function type, name, and parameters on one line, wrapping only as necessary. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13x86/PCI: Reword commentsBjorn Helgaas1-6/+3
Reword comments so they make sense. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13x86/PCI: Remove unnecessary local variable initializationBjorn Helgaas1-2/+2
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-03x86/PCI: Remove acpi_get_pxm() usageBjorn Helgaas1-17/+2
The PCI host bridge code doesn't care about _PXM values directly; it only needs to know what NUMA node the hardware is on. This uses acpi_get_node() directly and removes the _PXM stuff. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-03x86/PCI: Use NUMA_NO_NODE, not -1, for unknown nodeBjorn Helgaas1-5/+5
NUMA_NO_NODE is the usual value for "we don't know what node this is on," e.g., it is the error return from acpi_get_node(). This changes uses of -1 to NUMA_NO_NODE. NUMA_NO_NODE is #defined to be -1 already, so this is not a functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-03x86/PCI: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node()Bjorn Helgaas1-3/+1
There are no callers of get_mp_bus_to_node(), so we no longer need mp_bus_to_node[], get_mp_bus_to_node(), or set_mp_bus_to_node(). This removes them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-03x86/PCI: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node()Bjorn Helgaas1-1/+1
This replaces all uses of get_mp_bus_to_node() with x86_pci_root_bus_node(). I think these uses are all on root buses, except possibly for blind probing, where NUMA node information is unimportant. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-15ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_nodeRafael J. Wysocki1-2/+2
Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-10-10x86/PCI: Coalesce multiple overlapping host bridge windowsAlexey Neyman1-4/+4
Previously we coalesced windows by expanding the first overlapping one and making the second invalid. But we never look at the expanded first window again, so we fail to notice other windows that overlap it. For example, we coalesced these: [io 0x0000-0x03af] // #0 [io 0x03e0-0x0cf7] // #1 [io 0x0000-0xdfff] // #2 into these, which still overlap: [io 0x0000-0xdfff] // #0 [io 0x03e0-0x0cf7] // #1 The fix is to expand the *second* overlapping resource and ignore the first, so we get this instead with no overlaps: [io 0x0000-0xdfff] // #2 [bhelgaas: changelog] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=62511 Signed-off-by: Alexey Neyman <stilor@att.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22PCI: Simplify pcie_bus_configure_settings() interfaceBjorn Helgaas1-7/+2
Based on a patch by Jon Mason (see URL below). All users of pcie_bus_configure_settings() pass arguments of the form "bus, bus->self->pcie_mpss". The "mpss" argument is redundant since we can easily look it up internally. In addition, all callers check "bus->self" for NULL, which we can also do internally. This patch simplifies the interface and the callers. No functional change. Reference: http://lkml.kernel.org/r/1317048850-30728-2-git-send-email-mason@myri.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-28x86/PCI: Increase info->res_num before checking pci_use_crsYijing Wang1-5/+2
We should increase info->res_num before we checking pci_use_crs return when pci=nocrs set. No functional change, since we don't use res_num and res_offset[] in the "!pci_use_crs" case anyway, but this makes the code read better. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <liuj97@gmail.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Feng Tang <feng.tang@intel.com>
2013-02-26Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-01-14ACPI / PCI: Set root bridge ACPI handle in advanceRafael J. Wysocki1-0/+9
The ACPI handles of PCI root bridges need to be known to acpi_bind_one(), so that it can create the appropriate "firmware_node" and "physical_node" files for them, but currently the way it gets to know those handles is not exactly straightforward (to put it lightly). This is how it works, roughly: 1. acpi_bus_scan() finds the handle of a PCI root bridge, creates a struct acpi_device object for it and passes that object to acpi_pci_root_add(). 2. acpi_pci_root_add() creates a struct acpi_pci_root object, populates its "device" field with its argument's address (device->handle is the ACPI handle found in step 1). 3. The struct acpi_pci_root object created in step 2 is passed to pci_acpi_scan_root() and used to get resources that are passed to pci_create_root_bus(). 4. pci_create_root_bus() creates a struct pci_host_bridge object and passes its "dev" member to device_register(). 5. platform_notify(), which for systems with ACPI is set to acpi_platform_notify(), is called. So far, so good. Now it starts to be "interesting". 6. acpi_find_bridge_device() is used to find the ACPI handle of the given device (which is the PCI root bridge) and executes acpi_pci_find_root_bridge(), among other things, for the given device object. 7. acpi_pci_find_root_bridge() uses the name (sic!) of the given device object to extract the segment and bus numbers of the PCI root bridge and passes them to acpi_get_pci_rootbridge_handle(). 8. acpi_get_pci_rootbridge_handle() browses the list of ACPI PCI root bridges and finds the one that matches the given segment and bus numbers. Its handle is then used to initialize the ACPI handle of the PCI root bridge's device object by acpi_bind_one(). However, this is *exactly* the ACPI handle we started with in step 1. Needless to say, this is quite embarassing, but it may be avoided thanks to commit f3fd0c8 (ACPI: Allow ACPI handles of devices to be initialized in advance), which makes it possible to initialize the ACPI handle of a device before passing it to device_register(). Accordingly, add a new __weak routine, pcibios_root_bridge_prepare(), defaulting to an empty implementation that can be replaced by the interested architecutres (x86 and ia64 at the moment) with functions that will set the root bridge's ACPI handle before its dev member is passed to device_register(). Make both x86 and ia64 provide such implementations of pcibios_root_bridge_prepare() and remove acpi_pci_find_root_bridge() and acpi_get_pci_rootbridge_handle() that aren't necessary any more. Included is a fix for breakage on systems with non-ACPI PCI host bridges from Bjorn Helgaas. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-04X86: drivers: remove __dev* attributes.Greg Kroah-Hartman1-6/+5
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-09Merge branch 'pci/mike-x86-tra' into nextBjorn Helgaas1-3/+18
* pci/mike-x86-tra: x86/PCI: Allow x86 platforms to use translation offsets
2012-11-08x86/PCI: Allow x86 platforms to use translation offsetsMike Yoknis1-3/+18
The memory range descriptors in the _CRS control method contain an address translation offset for host bridges. This value is used to translate addresses across the bridge. The support to use _TRA values is present for other architectures but not for X86 platforms. For existing X86 platforms the _TRA value is zero. Non-zero _TRA values are expected on future X86 platforms. This change will register that value with the resource. Signed-off-by: Mike Yoknis <mike.yoknis@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-08x86/PCI: Ignore _SEG on HP xw9300Bjorn Helgaas1-2/+23
The xw9300 BIOS supplies _SEG methods that are incorrect, which results in some LSI SCSI devices not being discovered. This adds a quirk to ignore _SEG on this machine and default to zero. The xw9300 has three host bridges: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 40-7f]) ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 80-ff]) When the BIOS "ACPI Bus Segmentation" option is enabled (as it is by default), the _SEG methods of the PCI1 and PCI2 bridges return 1 and 2, respectively. However, the BIOS implementation appears to be incomplete, and we can't enumerate devices in those domains. But if we assume PCI1 and PCI2 really lead to buses in domain 0, everything works fine. Windows XP and Vista also seem to ignore these _SEG methods. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543308 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=15362 Reported-and-Tested-by: Sean M. Pappalardo <pegasus@renegadetech.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-22x86/PCI: Clear host bridge aperture struct resourceYinghai Lu1-2/+1
Use kzalloc() so the struct resource doesn't contain garbage in fields we don't initialize. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: x86@kernel.org
2012-06-23x86/PCI: get rid of redundant log messagesJiang Liu1-7/+0
For each resource of a PCI host bridge, the arch code and PCI code log following messages. We don't need both, so drop the arch-specific printing. pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23x86/PCI: update MMCONFIG information when hot-plugging PCI host bridgesJiang Liu1-3/+90
This patch enhances x86 arch-specific code to update MMCONFIG information when PCI host bridge hotplug event happens. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-14x86/PCI: use _CRS bus number aperture for host bridges from ACPIYinghai Lu1-4/+5
Add the host bridge bus number aperture from _CRS to the resource list. Like the MMIO and I/O port apertures, this will be used when assigning resources to hot-added devices or in the case of conflicts. Note that we always use the _CRS bus number aperture, even if we're ignoring _CRS otherwise. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-14PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu1-1/+1
Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-07resources: add resource_overlaps()Wei Yang1-11/+1
Add resource_overlaps(), which returns true if two resources overlap at all. Use this to replace the complicated check in coalesce_windows(). Signed-Off-By: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-01x86/PCI: embed pci_sysdata into pci_root_info on ACPI pathYinghai Lu1-17/+4
Embed the x86 struct pci_sysdata in the struct pci_root_info so it will be automatically freed in the remove path. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-01x86/PCI: embed name into pci_root_info structYinghai Lu1-5/+2
We now keep the pci_root_info struct for the entire lifetime of the host bridge, so just embed the name in the struct rather than allocating it separately. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-01x86/PCI: add host bridge resource release for _CRS pathYinghai Lu1-12/+51
1. Allocate pci_root_info instead of using stack. We need to pass around info for release function. 2. Add release_pci_root_info 3. Set x86 host bridge release function to make sure root bridge related resources get freed during root bus removal. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-01x86/PCI: refactor get_current_resources()Yinghai Lu1-21/+13
Rename get_current_resources() to probe_pci_root_info. 1. Remove resource list head from pci_root_info 2. Make get_current_resources() not pass resources 3. Rename get_current_resources() to probe_pci_root_info() Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30x86/PCI: fix memleak with get_current_resources()Yinghai Lu1-19/+30
In pci_scan_acpi_root(), when pci_use_crs is set, get_current_resources() is used to get pci_root_info, and it will allocate name and resource array. Later if pci_create_root_bus() can not create bus (could be already there...) it will only free bus res list, but the name and res array is not freed. Let get_current_resource() take info pointer instead of using local info. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-03-24Merge branch 'linux-next' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-01x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS versionJonathan Nieder1-1/+0
Carlos was getting WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52() when probing his sound card, and sound did not work. After adding pci=use_crs to the kernel command line, no more trouble. Ok, we can add a quirk. dmidecode output reveals that this is an MSI MS-7253, for which we already have a quirk, but the short-sighted author tied the quirk to a single BIOS version, making it not kick in on Carlos's machine with BIOS V1.2. If a later BIOS update makes it no longer necessary to look at the _CRS info it will still be harmless, so let's stop trying to guess which versions have and don't have accurate _CRS tables. Addresses https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5533 Also see <https://bugzilla.kernel.org/show_bug.cgi?id=42619>. Reported-by: Carlos Luna <caralu74@gmail.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-28x86/PCI: use host bridge _CRS info on MSI MS-7253Jonathan Nieder1-0/+11
In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by default on a board that needs it. This fixes boot failures and oopses introduced in 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res"). The quirk is quite targetted (to a specific board and BIOS version) for two reasons: (1) to emphasize that this method of tackling the problem one quirk at a time is a little insane (2) to give BIOS vendors an opportunity to use simpler tables and allow us to return to generic behavior (whatever that happens to be) with a later BIOS update In other words, I am not at all happy with having quirks like this. But it is even worse for the kernel not to work out of the box on these machines, so... Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619 Reported-by: Svante Signell <svante.signell@telia.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: fix memleak when ACPI _CRS is not used.Yinghai Lu1-5/+7
warning: unreferenced object 0xffff8801f6914200 (size 512): comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s) hex dump (first 32 bytes): 00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00 `X/............. backtrace: [<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43 [<ffffffff8113764f>] __kmalloc+0x121/0x183 [<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6 [<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c [<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421 [<ffffffff81408f50>] acpi_device_probe+0x50/0x190 [<ffffffff8149edc7>] really_probe+0x99/0x126 [<ffffffff8149ef83>] driver_probe_device+0x3b/0x56 [<ffffffff8149effd>] __driver_attach+0x5f/0x82 [<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88 [<ffffffff8149eb87>] driver_attach+0x1e/0x20 [<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d [<ffffffff8149f47b>] driver_register+0x91/0xfe [<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45 [<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28 [<ffffffff810001e7>] do_one_initcall+0x57/0x134 The system has _CRS for root buses, but they are not used because the machine date is before the cutoff date for _CRS usage. Try to free those unused resource arrays and names. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-14x86/PCI: don't fall back to defaults if _CRS has no aperturesBjorn Helgaas1-1/+6
Host bridges that lead to things like the Uncore need not have any I/O port or MMIO apertures. For example, in this case: ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) PCI: root bus ff: using default resources PCI host bridge to bus 0000:ff pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] pci_bus 0000:ff: root bus resource [mem 0x00000000-0x3fffffffffff] we should not pretend those default resources are available on bus ff. CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-07x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()Bjorn Helgaas1-14/+14
x86 has two kinds of PCI root bus scanning: (1) ACPI-based, using _CRS resources. This used pci_create_bus(), not pci_scan_bus(), because ACPI hotplug needed to split the pci_bus_add_devices() into a separate host bridge .start() method. This patch parses the _CRS resources earlier, so we can build a list of resources and pass it to pci_create_root_bus(). Note that as before, we parse the _CRS even if we aren't going to use it so we can print it for debugging purposes. (2) All other, which used either default resources (ioport_resource and iomem_resource) or information read from the hardware via amd_bus.c or similar. This used pci_scan_bus(). This patch converts x86_pci_root_bus_res_quirks() (previously called from pcibios_fixup_bus()) to x86_pci_root_bus_resources(), which builds a list of resources before we call pci_scan_root_bus(). We also use x86_pci_root_bus_resources() if we have ACPI but are ignoring _CRS. CC: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>