summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-11-24MIPS: bcm3384: Initial commit of bcm3384 platform supportKevin Cernekee13-0/+698
This supports SMP Linux running on the BCM3384 Zephyr (BMIPS5000) application processor, with fully functional UART and USB 1.1/2.0. Device Tree is used to configure the following items: - All peripherals - Early console base address - SMP or UP mode - MIPS counter frequency - Memory size / regions - DMA offset - Kernel command line The DT-enabled bootloader and build instructions are posted at https://github.com/Broadcom/aeolus Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8170/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Create a helper function for DT setupKevin Cernekee4-22/+22
A couple of platforms register two buses and call of_platform_populate(). Move this into a common function to reduce duplication. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)Kevin Cernekee2-0/+2
This is a dual core (quad thread) BMIPS5000. It needs a little extra code to boot the second core (CPU2/CPU3), but for now we can treat it the same as a single core BMIPS5000. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Add special cache handling in c-r4k.cKevin Cernekee1-0/+43
BMIPS435x and BMIPS438x have a single shared L1 D$ and load/store unit, so it isn't necessary to raise IPIs to keep both CPUs coherent. BMIPS5000 has VIPT L1 caches that handle aliases in hardware, and its I$ fills from D$. But a special sequence with 2 SYNCs and 32 NOPs is needed to ensure coherency. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Let each platform customize the CPU1 IRQ maskKevin Cernekee2-2/+5
On some chips like bcm3384, "other stuff" gets wired up to CPU1's IE_IRQ1 input, generating spurious IRQs. In this case we want the platform code to be able to mask it off. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Select the appropriate L1_CACHE_SHIFT for 438x and 5000 CPUsKevin Cernekee1-0/+2
BMIPS438x has a 64-byte D$ line size and BMIPS5000 has a 128-byte L2 line size. If L1_CACHE_SHIFT is undersized, DMA buffers will not be cacheline-aligned and terrible things will happen. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Allow MIPS_CPU_SCACHE to be used with different line sizesKevin Cernekee1-1/+1
CONFIG_MIPS_CPU_SCACHE determines whether to build sc-mips.c. However, it is currently hardwired to use an L1_SHIFT of 6 (64 bytes). Move the L1_SHIFT selection into the CPU or SoC section so that other SoCs can select different values. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8162/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Explicitly configure reset vectors prior to secondary bootKevin Cernekee1-21/+8
The secondary CPU's reset vector needs to be set to KSEG1 for a cold boot (release from reset), or KSEG0 for a warm restart. On a cold boot KSEG0 may be unavailable (BMIPS4380), and on a warm restart KSEG1 may be unavailable (XKS01 mode on 4380 or 5000). Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPUJon Fraser1-0/+1
CPU interrupts need to be disabled on a cpu being taken down. When a cpu is hot-plugged out of the system the following sequence occurs. On the CPU where the hotplug sequence was initiated: cpu_down _cpu_down { __cpu_notify(CPU_DOWN_PREPARE __stop_machine(take_cpu_down wait for cpu to run disable code. __cpu_die } On the CPU being disabled: take_cpu_down __cpu_disable { mp_ops->cpu_disable bmips_cpu_disable clear_c0_status(IE_IRQ5) (added) cpu_notify(CPU_DYING... } Before the cpu_notifier is called with CPU_DYING, all interrupts on the dying cpu must be disabled. This guarantees that before tick_notify is called with the CPU_DYING event and sets the clock device pointer to NULL, there can not be any more clock interrupts. When this wasn't done, an unfortunately-timed timer interrupt sometimes caused hangs immediately prior to system suspend: Debug PM is not enabled. To enable partial suspend, rebuild kernel with CONFIG_PM_DEBUG Pass 1 out of 1,PM: Syncing filesystems ... mode=none, tp1=done. 1, flags=5, cycle_tp=, sleep= Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: suspend of devices complete after 54.199 msecs PM: late suspend of devices complete after 0.172 msecs Disabling non-boot CPUs ... SMP: CPU1 is offline INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 0, t=62537 jiffies) Call Trace: [<804baa78>] dump_stack+0x8/0x34 [<8008a2d8>] __rcu_pending+0x4b8/0x55c [<8008adf4>] rcu_check_callbacks+0x78/0x180 [<80037830>] update_process_times+0x40/0x6c [<80072fe4>] tick_sched_timer+0x74/0xe4 [<80050180>] __run_hrtimer.clone.30+0x64/0x140 [<80051150>] hrtimer_interrupt+0x19c/0x4bc [<8000cdb8>] c0_compare_interrupt+0x50/0x88 [<80081b18>] handle_irq_event_percpu+0x5c/0x2f4 [<80086490>] handle_percpu_irq+0x8c/0xc0 [<800811b4>] generic_handle_irq+0x34/0x54 [<800067dc>] do_IRQ+0x18/0x2c [<8000375c>] plat_irq_dispatch+0xd0/0x128 [<80004a04>] ret_from_irq+0x0/0x4 [<80004c40>] r4k_wait+0x20/0x40 [<80006b6c>] cpu_idle+0x98/0xf0 [<805d3988>] start_kernel+0x424/0x440 Signed-off-by: Jon Fraser <jfraser@broadcom.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Allow BMIPS3300 to utilize SMP ebase relocation codeJon Fraser1-0/+1
BMIPS3300 processors do not have the hardware to support SMP, but with a small tweak, the SMP ebase relocation code allows BMIPS3300-based platforms to reuse the S2/S3 power management code from BMIPS4380-based chips. Normally this is as simple as adding one line to prom_init(): board_ebase_setup = &bmips_ebase_setup; Signed-off-by: Jon Fraser <jfraser@broadcom.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Introduce helper function to change the reset vectorKevin Cernekee1-7/+58
This will need to be called from a few different places, and the logic is starting to get a bit hairy (with the need for IPIs, CPU bug workarounds, and hazards). Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8158/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BMIPS: Align secondary boot sequence with latest firmware releasesKevin Cernekee1-11/+1
On some older BMIPS5200 (dual core / quad thread) platforms, the PROM code set up CPU2/CPU3 so they would be started through an NMI instead of through the ACTION register. But this was incompatible with some power management features that were later added, so the scheme was changed so that Linux is fully responsible for booting CPU2/CPU3. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8157/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Add a clockevent/clocksource using PWM TimerKelvin Cheung4-31/+266
This patch add a clockevent/clocksource using PWM Timer for Loongson1B, which is based on earlier work by Tang, Haifeng. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Some fixes/updates for LS1BKelvin Cheung9-31/+283
- Fix hanging ethernet issue of LS1B v2.0 by adding pbl field in plat data. (It seems that the MAC controller of LS1B v2.0 can only accept pbl=1) - Add GMAC1 support and setup MUX in terms of PHY mode. - Add CPUFreq support. - Add MUX Register Definitions. - Add PWM Register Definitions. - Update clock register bitfields according to the latest spec. - Update clock related stuff. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8024/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Improve early printkKelvin Cheung2-17/+14
- Determine serial port for early printk according to kernel command line. - Move to 8250/16550 serial early printk driver. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson1B: Fix reboot problem on LS1BKelvin Cheung2-13/+18
- Correct the header file of watchdog registers - Use ioremap_nocache() to access watchdog registers instead Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: DMA: Explain the lack of special handling for R14000/R16000.Ralf Baechle1-0/+5
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Clean up nvram headerRafał Miłecki3-39/+33
1) Move private defines to the .c file 2) Move SPROM helper to the sprom.c 3) Drop unused code 4) Rename magic to the NVRAM_MAGIC 5) Add const to the char pointer we never modify Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Use mtd as an alternative way/API to get NVRAM contentRafał Miłecki1-4/+38
NVRAM can be read using magic memory offset, but after all it's just a flash partition. On platforms where NVRAM isn't needed early we can get it using mtd subsystem. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8266/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Kconfig option to better exercise/debug hybrid FPRsPaul Burton2-0/+31
The hybrid FPR scheme exists to allow for compatibility between existing FP32 code and newly compiled FP64A code. Such code should hopefully be rare in the real world, and for the moment is difficult to come across. All code except that built for the FP64 ABI can correctly execute using the hybrid FPR scheme, so debugging the hybrid FPR implementation can be eased by forcing all such code to use it. This is undesirable in general due to the trap & emulate overhead of the hybrid FPR implementation, but is a very useful option to have for debugging. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7680/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ELF: Set FP mode according to .MIPS.abiflagsPaul Burton4-20/+211
This patch reads the .MIPS.abiflags section when it is present, and sets the FP mode of the task accordingly. Any loaded ELF files which do not contain a .MIPS.abiflags section will continue to observe the previous behaviour, that is FR=1 if EF_MIPS_FP64 is set else FR=0. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7681/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: ELF: Add definition for the .MIPS.abiflags sectionPaul Burton1-0/+25
New toolchains will generate a .MIPS.abiflags section, referenced by a new PT_MIPS_ABIFLAGS program header. This section will provide information about the requirements of the ELF, including the ISA level the code is built for, the ASEs it requires, the size of various registers and its expectations of the floating point mode. This patch introduces a definition of the structure of this section and the program header, for use in a subsequent patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7682/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Support for hybrid FPRsPaul Burton5-10/+100
Hybrid FPRs is a scheme where scalar FP registers are 64b wide, but accesses to odd indexed single registers use bits 63:32 of the preceeding even indexed 64b register. In this mode all FP code except that built for the plain FP64 ABI can execute correctly. Most notably a combination of FP64A & FP32 code can execute correctly, allowing for existing FP32 binaries to be linked with new FP64A binaries that can make use of 64 bit FP & MSA. Hybrid FPRs are implemented by setting both the FR & FRE bits, trapping & emulating single precision FP instructions (via Reserved Instruction exceptions) whilst allowing others to execute natively. It therefore has a penalty in terms of execution speed, and should only be used when no fully native mode can be. As more binaries are recompiled to use either the FPXX or FP64(A) ABIs, the need for hybrid FPRs should diminish. However in the short to mid term it allows for a gradual transition towards that world, rather than a complete ABI break which is not feasible for some users & not desirable for many. A task will be executed using the hybrid FPR scheme when its TIF_HYBRID_FPREGS flag is set & TIF_32BIT_FPREGS is clear. A further patch will set the flags as necessary, this patch simply adds the infrastructure necessary for the hybrid FPR mode to work. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7683/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Ensure Config5.UFE is clear on bootPaul Burton1-1/+1
As is done for UFR, ensure that userland cannot directly manipulate the mode by clearing the UFE bit during boot. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7677/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: detect presence of the FRE & UFR bitsPaul Burton3-0/+7
Detect the presence of the Config5 FRE & UFE bits, as indicated by the FREP bit in FPIR. Record this as a CPU option bit, and provide a cpu_has_fre macro to ease checking of that option bit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: define bits introduced for hybrid FPRsPaul Burton1-0/+3
Add definitions for the FRE & UFE bits in Config5, and the FREP bit in FPIR. These bits are used to support a hybrid FPR scheme allowing a mixture of FP32 & FP64 code to execute within a task. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add RS780/SBX00 HPET supportHuacai Chen6-1/+350
CPUFreq driver need external timer, so add hpet at first. In Loongson 3, only Core-0 can receive external interrupt. As a result, timekeeping cannot absolutely use HPET timer. We use a hybrid solution: Core-0 use HPET as its clock event device, but other cores still use MIPS; clock source is global and doesn't need interrupt, so use HPET. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add oprofile supportHuacai Chen3-0/+225
Loongson-3 has two groups of performance counters, they are 4 sub- registers of CP0's REG25. This patch add oprofile support. REG25, sel 0: Perf Control of group 0; REG25, sel 1: Perf Counter of group 0; REG25, sel 2: Perf Control of group 1; REG25, sel 3: Perf Counter of group 1. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Improve LEFI firmware interfaceHuacai Chen14-42/+234
Machtypes of Loongson-3 machines become more and more, but there are only small differences among different machtypes. Keeping a large table of machtypes is very ugly and hard to extend. We found that the major machtype differences are UARTs information (number of UARTs, UART IRQs, UART clocks, etc.), platform devices (EC, temperature sensors, fan controllers, etc.) and some workarounds (because of some CPU bugs or mainboard bugs). In this patch we improve the UEFI-like (LEFI) interface to make all Loongson-3 machines use a same machtype "generic-loongson-machine". Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Allow booting from any coreHuacai Chen7-36/+67
By offering Logical->Physical core id mapping, so as to reserve some physical cores via mask. This allow booting from any core when core-0 has problems. Since the maximun cores supported by Loongson-3 is 16, 32-bit cpu_startup_core_id can be split to 16-bit cpu_startup_core_id and 16-bit reserved_cores_mask for compatibility. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add PHYS48_TO_HT40 supportHuacai Chen3-3/+22
The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical address. This implies only node-0's memory is DMAable because high bits (Node ID) will lost. Fortunately, by configuring address windows in firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used now) from Loongson-3's 48-bit address space and embed it into 40-bit (bit 37~38). Every NUMA node can do DMA now (however, maximum memory of each node is reduced to 2^37 = 128GB). Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: R3000: Remove redundant parenthesesIsamu Mogi1-1/+1
Signed-off-by: Isamu Mogi <isamu@leafytree.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8292/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: R3000: Replace magic numbers with macrosIsamu Mogi1-5/+6
Also include asm/mmu_context.h for ASID_MASK. Signed-off-by: Isamu Mogi <isamu@leafytree.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8291/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Remove __strlen_user().Ralf Baechle3-34/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Initialize bcma bus later (with mm available)Rafał Miłecki3-6/+38
Initializaion with memory allocator available will be much simpler, this will allow cleanup in the bcma code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8234/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Move SPROM fallback code into sprom.cRafał Miłecki3-56/+73
This is some general cleanup as well as preparing sprom.c to become a standalone driver. We will need this for bcm53xx ARM arch support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8232/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Make bcma init NVRAM instead of bcm47xx polling itRafał Miłecki1-40/+2
This drops ssb/bcma dependency and will allow us to make it a standalone driver. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/8233/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx polling itRafał Miłecki2-21/+10
This makes NVRAM code less bcm47xx/ssb specific allowing it to become a standalone driver in the future. A similar patch for bcma will follow when it's ready. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7612/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: BCM47XX: Get rid of calls to KSEG1ADDRRafał Miłecki1-12/+32
We should be using ioremap_nocache helper which handles remaps in a smarter way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/7611/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Move gic.h to include/linux/irqchip/mips-gic.hAndrew Bresticker17-342/+16
Now that the MIPS GIC irqchip lives in drivers/irqchip/, move its header over to include/linux/irqchip/. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8129/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24irqchip: mips-gic: Use proper iomem accessorsAndrew Bresticker1-65/+7
Get rid of the ugly GICREAD/GICWRITE/GICBIS macros and use proper iomem accessors instead. Since the GIC registers are not directly accessed outside of the GIC driver any more, make gic_base static and move all the GIC register manipulation macros out of gic.h, converting them to static inline functions. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8127/ Patchwork: https://patchwork.linux-mips.org/patch/8229/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Malta: Stop using GIC REG macrosAndrew Bresticker1-9/+9
Stop using the REG macros from gic.h and instead use proper iomem accessors. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8126/ Patchwork: https://patchwork.linux-mips.org/patch/8227/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: SEAD3: Stop using GIC REG macrosAndrew Bresticker1-4/+4
Stop using the REG macros from gic.h and instead use proper iomem accessors. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8125/ Patchwork: https://patchwork.linux-mips.org/patch/8228/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24irqchip: mips-gic: Export function to read counter widthAndrew Bresticker2-8/+2
Export the function gic_get_count_width to read the width of the GIC global counter from GIC_SH_CONFIG. Update the GIC clocksource driver to use this new function. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8124/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Malta: Use gic_read_count() to read GIC timerAndrew Bresticker1-11/+3
Instead of reading the GIC registers directly, use the interface the GIC driver already exposes for reading the global timer. Also get rid of the unnecessary #ifdefs. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8123/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: SEAD3: Use generic plat_irq_dispatchAndrew Bresticker1-22/+1
The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for dispatching interrupts on SEAD-3 in legacy and vectored interrupt modes. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7822/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Malta: Use generic plat_irq_dispatchAndrew Bresticker1-92/+0
The generic plat_irq_dispatch provided in irq_cpu.c is sufficient for dispatching interrupts on Malta in legacy and vectored interrupt modes. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7821/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24irqchip: mips-gic: Remove unnecessary globalsAndrew Bresticker1-5/+0
Now that all GIC interrupt routing and handling logic is in the GIC driver itself, un-export variables/functions which are no longer used outside the GIC driver. This also allows us to remove gic_compare_int and combine gic_get_int_mask with gic_get_int since these interfaces are no longer used. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7820/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24irqchip: mips-gic: Support local interruptsAndrew Bresticker8-57/+56
The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24irqchip: mips-gic: Use separate edge/level irq_chipsAndrew Bresticker1-1/+0
GIC edge-triggered interrupts must be acknowledged by clearing the edge detector via a write to GIC_SH_WEDGE. Create a separate edge-triggered irq_chip with the appropriate irq_ack() callback. This also allows us to get rid of gic_irq_flags. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7818/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-11 10:44:03 +0300