summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-01-21powerpc/rtas_flash: Use simple_read_from_bufferAkinobu Mita1-47/+6
Simplify read file operation for /proc/powerpc/rtas/* interface by using simple_read_from_buffer. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/spufs: Use simple_write_to_bufferAkinobu Mita1-20/+7
Simplify several write fileoperations for spufs by using simple_write_to_buffer(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/ppc32/tracing: Add stack frame to calls of trace_hardirqs_on/offSteven Rostedt1-0/+11
32-bit variant of the previous patch for 64-bit: << When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack.... >> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/offSteven Rostedt1-10/+30
When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack. Add a second stack when calling trace_hardirqs_on/off() otherwise the following oops might occur: Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 PA Semi PWRficient last sysfs file: /sys/block/sda/size Modules linked in: ohci_hcd ehci_hcd usbcore NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440 REGS: c00000003e2f3af0 TRAP: 0300 Not tainted (2.6.37-rc6+) MSR: 9000000000001032 <ME,IR,DR> CR: 48044444 XER: 20000000 DAR: 00000001ffb9db50, DSISR: 0000000040000000 TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1 GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8 GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000 GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000 GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008 GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950 GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000 GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38 GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70 NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0 LR [c0000000000034d4] decrementer_common+0xd4/0x100 Call Trace: [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable) [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100 Instruction dump: 81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000 80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050 ---[ end trace 4ec7fd2be9240928 ]--- Reported-by: Joerg Sommer <joerg@alea.gnuu.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Ensure the else case of feature sections will fitMichael Ellerman2-12/+34
When we create an alternative feature section, the else case must be the same size or smaller than the body. This is because when we patch the else case in we just overwrite the body, so there must be room. Up to now we just did this by inspection, but it's quite easy to enforce it in the assembler, so we should. The only change is to add the ifgt block, but that effects the alignment of the tabs and so the whole macro is modified. Also add a test, but #if 0 it because we don't want to break the build. Anyone who's modifying the feature macros should enable the test. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21Merge remote branch 'kumar/next' into mergeBenjamin Herrenschmidt9-16/+58
2011-01-19x86: Unify "numa=" command line option handlingJan Beulich5-20/+30
In order to be able to suppress the use of SRAT tables that 32-bit Linux can't deal with (in one case known to lead to a non-bootable system, unless disabling ACPI altogether), move the "numa=" option handling to common code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Renninger <trenn@suse.de> LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-19Revert "x86: Make relocatable kernel work with new binutils"Ingo Molnar1-9/+2
This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with new binutils"). Markus Trippelsdorf reported a boot failure caused by this patch. The real solution to the original patch will likely involve an arch-generic solution to define an overlaid jiffies_64 and jiffies variables. Until that's done and tested on all architectures revert this commit to solve the regression. Reported-and-bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <4D36A759.60704@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
2011-01-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds55-129/+3107
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
2011-01-18MIPS: Malta: enable Cirrus FB consoleAurelien Jarno1-0/+3
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: add CONFIG_VIRTUALIZATION for virtio supportAurelien Jarno1-0/+16
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Implement __read_mostlyDavid Daney2-1/+3
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common WMAC device for AR913X based boardsGabor Juhos6-0/+92
Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: Add initial support for the Atheros AP81 reference boardGabor Juhos4-0/+104
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common SPI controller deviceGabor Juhos6-0/+84
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos1-0/+23
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO buttons deviceGabor Juhos5-0/+113
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common watchdog deviceGabor Juhos3-0/+12
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO LEDs deviceGabor Juhos5-0/+100
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add initial support for the Atheros PB44 reference boardGabor Juhos4-0/+73
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: utilize the MIPS multi-machine supportGabor Juhos3-0/+37
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add GPIOLIB supportGabor Juhos7-2/+252
This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCsGabor Juhos20-0/+1365
This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: jump label: Add MIPS support.David Daney5-0/+110
In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/1923/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use WARN() in uasm for better diagnostics.David Daney1-24/+16
On the off chance that uasm ever warns about overflow, there is no way to know what the offending instruction is. Change the printks to WARNs, so we can get a nice stack trace. It has the added benefit of being much more noticeable than the short single line warning message, so is less likely to be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1905/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Optimize TLB handlers for Octeon CPUsDavid Daney1-51/+310
Octeon can use scratch registers in the TLB handlers. Octeon II can use LDX instructions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1904/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add LDX and LWX instructions to uasm.David Daney3-1/+24
Needed by Octeon II optimized TLB handlers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Pachwork: https://patchwork.linux-mips.org/patch/1903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use BBIT instructions in TLB handlersDavid Daney1-29/+90
If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they are more efficient than an AND followed by an branch and then restoring the clobbered register. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Declare uasm bbit0 and bbit1 functions.David Daney1-0/+2
these are already defined, but declaring them allow them to be used outside of uasm.c. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use C0_KScratch (if present) to hold PGD pointer.David Daney3-18/+108
Decide at runtime to use either Context or KScratch to hold the PGD pointer. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add DINSM to uasm.David Daney2-1/+11
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Probe for presence of KScratch registers.David Daney3-0/+5
Probe c0_config4 for KScratch registers and report them in /proc/cpuinfo. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1877/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add generic support for multiple machines within a single kernelGabor Juhos6-1/+157
This patch adds a generic solution to support multiple machines based on a given SoC within a single kernel image. It is implemented already for several other architectures but MIPS has no generic support for that yet. [Ralf: This competes with DT but DT is a much more complex solution and this code has been used by OpenWRT for a long time so for now DT is a bad reason to stop the merge but longer term this should be migrated to DT.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: kaloz@openwrt.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1814/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use printf extension %pR for struct resourceJoe Perches1-5/+2
Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1772/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Sibyte: Use vzalloc in sbbus profilerJoe Perches1-2/+1
Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18Merge branch 'fixes' of ↵Linus Torvalds1-12/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: parisc: fix compile breakage caused by inlining maybe_mkwrite parisc : Remove broken line wrapping handling pdc_iodc_print()
2011-01-18Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds2-2/+5
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix asm/pgtable.h microblaze: Fix missing pagemap.h
2011-01-18Merge branch 'for-linus' of ↵Linus Torvalds38-623/+727
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits) m68knommu: fix broken setting of irq_chip and handler m68knommu: switch to using -mcpu= flags for ColdFire targets m68knommu: arch/m68knommu/Kconfig whitespace cleanup m68knommu: create optimal separate instruction and data cache for ColdFire m68knommu: support ColdFire caches that do copyback and write-through m68knommu: support version 2 ColdFire split cache m68knommu: make cache push code ColdFire generic m68knommu: clean up ColdFire cache control code m68knommu: move inclusion of ColdFire v4 cache registers m68knommu: merge bit definitions for version 3 ColdFire cache controller m68knommu: create bit definitions for the version 2 ColdFire cache controller m68knommu: remove empty __iounmap() it is no used m68knommu: remove kernel_map() code, it is not used m68knommu: remove do_page_fault(), it is not used m68knommu: use user stack pointer hardware on some ColdFire cores m68knommu: remove command line printing DEBUG m68knommu: remove fasthandler interrupt code m68knommu: move UART addressing to part specific includes m68knommu: fix clock rate value reported for ColdFire 54xx parts m68knommu: move ColdFire CPU names into their headers ...
2011-01-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix tracepoint id to string perf.data header table perf tools: Fix handling of wildcards in tracepoint event selectors powerpc: perf: Fix frequency calculation for overflowing counters
2011-01-18x86: Clear irqstack thread_infoBrian Gerst1-5/+2
Mathias Merz reported that v2.6.37 failed to boot on his system. Make sure that the thread_info part of the irqstack is initialized to zeroes. Reported-and-Tested-by: Matthias Merz <linux@merz-ka.de> Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <AANLkTimyKXfJ1x8tgwrr1hYnNLrPfgE1NTe4z7L6tUDm@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18x86: Make relocatable kernel work with new binutilsShaohua Li1-2/+9
The CONFIG_RELOCATABLE=y option is broken with new binutils, which will make boot panic. According to Lu Hongjiu, the affected binutils are from 2.20.51.0.12 to 2.21.51.0.3, which are release since Oct 22 this year. At least ubuntu 10.10 is using such binutils. See: http://sourceware.org/bugzilla/show_bug.cgi?id=12327 The reason of the boot panic is that we have 'jiffies = jiffies_64;' in vmlinux.lds.S. The jiffies isn't in any section. In kernel build, there is warning saying jiffies is an absolute address and can't be relocatable. At runtime, jiffies will have virtual address 0. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Lu Hongjiu<hongjiu.lu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1295312269.1949.725.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18ARM: S5PV310: Add missing virtual ASoC DMA deviceJassi Brar2-2/+4
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5PV210: Add missing virtual ASoC DMA deviceJassi Brar2-0/+2
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6450: Add missing virtual ASoC DMA deviceJassi Brar1-0/+1
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6440: Add missing virtual ASoC DMA deviceJassi Brar1-0/+1
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6442: Enable I2S device to work on SMDK6442Jassi Brar1-0/+1
Add missing virtual ASoC DMA device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-17Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-8/+6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: spi/spi_sh_msiof: fix a wrong free_irq() parameter dt/flattree: Return virtual address from early_init_dt_alloc_memory_arch()
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds2-0/+18
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds28-504/+159
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix WARN_ON in __local_bh_enable() alpha: fix breakage caused by df9ee29270 alpha: add GENERIC_HARDIRQS_NO__DO_IRQ to Kconfig alpha/osf_sys: remove unused MAX_SELECT_SECONDS alpha: change to new Makefile flag variables alpha: kill off alpha_do_IRQ alpha: irq clean up alpha: use set_irq_chip and push down __do_IRQ to the machine types
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-25 23:28:20 +0300