Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 175281f80695569c7f9cf062e5d0ddc4addc109f ]
Chip select pinctrl phandle was missing in several stm32mp15x based boards.
Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 732dbcf52f74b254a7ddd4226e0b9638e1e7aeff ]
Chip select pinctrl phandle was missing in several stm32mp15x based boards.
Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Reinhold Mueller <reinhold.mueller@emtrion.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 21d83512bf2bd25ebed467151fd2bcd0cca7dc9a ]
Chip select pinctrl phandle was missing in several stm32mp15x based boards.
Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ffd2266bd32d9f31a4e918443c733906cff0d19 ]
Chip select pinctrl phandle was missing in several stm32mp15x based boards.
Fixes: ea99a5a02ebc ("ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bfa2544dbd1133f0b0af4e967de3bb9c1e3a497 ]
The 2nd DDR clock for sam9x60 DDR controller is peripheral clock with
id 49.
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221208115241.36312-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69876bc6fd4de3ad2dc7826fe269e91fa2c1807f ]
The memory map was wrong. Fix it to prevent the device from randomly
rebooting.
Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-2-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2bd5ab93335bf2c4d22c8db427822ae637ed8dc3 ]
MSM8992 uses the same mutex hardware as MSM8994. This was wrong
from the start, but never presented as an issue until the sfpb
compatible was given different driver data.
Fixes: 6a6d1978f9c0 ("arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support")
Reported-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80502ffab2fa92ba9777e381efea2efddc348d13 ]
The correct address offset is 0x12100.
Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae066f374687d7dd06bb8c732f66d6ab3c3fd480 ]
The GW7901 has USB2 routed to a USB VBUS supply with over-current
protection via an active-low pin. Define the OC pin polarity properly.
Fixes: 2b1649a83afc ("arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a65c759e4666476a6642ad87b4db8a67cb957d0 ]
Use the correct indention.
Fixes: d50650500064 ("arm64: dts: imx8mp-evk: Add PCIe support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10e2f328bd900787fd2db24e474f87e1d525ccc4 ]
dt_binding_check detects an issue with the pgc_hsiomix power
domain:
pgc: 'power-domains@17' does not match any of the regexes
This is because 'power-domains' should be 'power-domain'
Fixes: 2ae42e0c0b67 ("arm64: dts: imx8mp: add HSIO power-domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3b75ace2085aca623c57e04ea7218ae690090fb ]
The GPC node references an interrupt parent, but it doesn't
state the interrupt itself. According to the TRM, this IRQ
is 87. This also eliminate an error detected from dt_binding_check
Fixes: fc0f05124621 ("arm64: dts: imx8mp: add GPC node with GPU power domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87b30c4b0efb6a194a7b8eac2568a3da520d905f ]
Calling of_find_compatible_node() returns a node pointer with refcount
incremented. Use of_node_put() on it when done.
The patch fixes the same problem on different i.MX platforms.
Fixes: 8b88f7ef31dde ("ARM: mx25: Retrieve IIM base from dt")
Fixes: 94b2bec1b0e05 ("ARM: imx27: Retrieve the SYSCTRL base address from devicetree")
Fixes: 3172225d45bd9 ("ARM: imx31: Retrieve the IIM base address from devicetree")
Fixes: f68ea682d1da7 ("ARM: imx35: Retrieve the IIM base address from devicetree")
Fixes: ee18a7154ee08 ("ARM: imx5: retrieve iim base from device tree")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62f0147fd4d86620853bee027800f988d3013656 ]
For clock and strobe pad of usdhc, need to config as pull down.
Current pad config set these pad as both pull up and pull down,
this is wrong, so fix it here.
Find this issue when enable HS400ES mode on one Micron eMMC chip,
CMD8 always meet CRC error in HS400ES/HS400 mode.
Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c620a30515c494b5eeb3dc0e40d3220ea04c53b ]
Set optional `simple-audio-card,mclk-fs` parameter to ensure a proper
clock to the nau8822 audio codec. Without this change with an audio
stream rate of 44.1 kHz the playback is faster.
Set the MCLK at the right frequency, codec can properly use it to
generate 44.1 kHz I2S-FS.
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5225ba9db112ec4ed67da5e4d8b72e618573955e ]
Early hardware did not support hardware handshaking on the UART, but
final production hardware did. When the hardware was updated the chip
select was changed to facilitate hardware handshaking on UART3. Fix the
ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the
EEPROM to operate again.
Fixes: 4ce01ce36d77 ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d1d030f00f3f3eea04017cbd50ffe44a2842ebc ]
Set optional `simple-audio-card,mclk-fs` parameter to ensure a proper
clock to the wm8904 audio codec. Without this change with an audio
stream rate of 44.1 kHz the playback is completely distorted.
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9dfbc72256b5de608ad10989bcbafdbbd1ac8d4e ]
The following build warning is seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
The imx6qdl-gw560x board does not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
Fixes: b8a559feffb2 ("ARM: dts: imx: add Gateworks Ventana GW5600 support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4dd0845c4f1f5371f1e06fef0e4a1734a2db964 ]
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 8b646cfb84c3 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard")
Fixes: 6418fd92417f ("ARM: dts: imx7d-pico: Add support for the nymph baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94e2cf1e0db5b06c7a6ae0878c5cbec925819a8a ]
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 47246fafef84 ("ARM: dts: imx6ul-pico: Add support for the dwarf baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfd04dd1c4b6c33afc2a934b957d71cf8ddd1539 ]
'regulator-compatible' is not a valid property according to
nxp,pca9450-regulator.yaml and causes the following warning:
DTC_CHK arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb
...
pmic@25: regulators:LDO1: Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Remove the invalid 'regulator-compatible' property.
Cc: Teresa Remmet <t.remmet@phytec.de>
Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee4e530bdde29a69c58656a919545251a782674e ]
The vendor kernel is using the GCC_USB4_DP_PHY_PRIM_BCR and
GCC_USB4_1_DP_PHY_PRIM_BCR resets for the USB4-USB3-DP QMP PHYs.
Update the primary USB-DP PHY node to match.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221121085058.31213-15-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 55228db2697c09abddcb9487c3d9fa5854a932cd upstream.
WG14 N2350 specifies that it is an undefined behavior to have type
definitions within offsetof", see
https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2350.htm
This specification is also part of C23.
Therefore, replace the TYPE_ALIGN macro with the _Alignof builtin to
avoid undefined behavior. (_Alignof itself is C11 and the kernel is
built with -gnu11).
ISO C11 _Alignof is subtly different from the GNU C extension
__alignof__. Latter is the preferred alignment and _Alignof the
minimal alignment. For long long on x86 these are 8 and 4
respectively.
The macro TYPE_ALIGN's behavior matches _Alignof rather than
__alignof__.
[ bp: Massage commit message. ]
Signed-off-by: YingChi Long <me@inclyc.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220925153151.2467884-1-me@inclyc.cn
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18bba1843fc7f264f58c9345d00827d082f9c558 upstream.
Add the missing #include of asm/assembler.h, which is where the ldr_l
macro is defined.
Fixes: ff7a167961d1b97e ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff7a167961d1b97e0e205f245f806e564d3505e7 upstream.
With the introduction of PRMT in the ACPI subsystem, the EFI rts
workqueue is no longer the only caller of efi_call_virt_pointer() in the
kernel. This means the EFI runtime services lock is no longer sufficient
to manage concurrent calls into firmware, but also that firmware calls
may occur that are not marshalled via the workqueue mechanism, but
originate directly from the caller context.
For added robustness, and to ensure that the runtime services have 8 KiB
of stack space available as per the EFI spec, introduce a spinlock
protected EFI runtime stack of 8 KiB, where the spinlock also ensures
serialization between the EFI rts workqueue (which itself serializes EFI
runtime calls) and other callers of efi_call_virt_pointer().
While at it, use the stack pivot to avoid reloading the shadow call
stack pointer from the ordinary stack, as doing so could produce a
gadget to defeat it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 980a637d11fe8dfc734f508a422185c2de55e669 upstream.
While compile-testing randconfig builds for the upcoming boardfile
removal, I noticed that an earlier patch of mine was completely
broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced
one set of build failures with another one, now resulting in
link failures like
ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe':
drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority'
ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources':
drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma'
drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info'
ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma':
drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status'
I tried reworking it, but the resulting patch ended up much bigger than
simply avoiding the original problem of unused-function warnings like
arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable]
As a result, revert the previous fix, and rearrange the code that
produces warnings to hide them. For mcbsp, the #ifdef check can
simply be removed as the cpu_is_omapxxx() checks already achieve
the same result, while in the io.c the easiest solution appears to
be to merge the common map bits into each soc specific portion.
This gets cleaned in a nicer way after omap7xx support gets dropped,
as the remaining SoCs all have the exact same I/O map.
Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected")
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0154252a3b87f77db1e44516d1ed2e82e2d29c30 upstream.
While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
were not updated leading to disabled and misconfigured SDHCI.
Cc: <stable@vger.kernel.org>
Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a1ed98fe0f2e7669f0409de0f46f317b275f8be upstream.
After commit cf7f3f4fa9e5 ("clk: imx8mp: fix usb_root_clk parent"),
usb_root_clk is no longer for suspend clock so update dts accordingly
to use right bus clock and suspend clock.
Fixes: fb8587a2c165 ("arm64: dtsi: imx8mp: add usb nodes")
Cc: stable@vger.kernel.org # ed1f4ccfe947: clk: imx: imx8mp: add shared clk gate for usb suspend clk
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43d5f5d63699724d47f0d9e0eae516a260d232b4 upstream.
The 32-bit memory resource is needed for non-prefetchable memory
allocations on the PCIe bus, however with some cards (such as the
SM768) the system fails to allocate memory from this.
Checking the allocation against the datasheet, it looks like there
has been a mis-calcualation of the resource for the first memory
region (0x0060090000..0x0070ffffff) which in the data-sheet for
the fu740 (v1p2) is from 0x0060000000..0x007fffffff. Changing
this to allocate from 0x0060090000..0x007fffffff fixes the probing
issues.
Fixes: ae80d5148085 ("riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC")
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: stable@vger.kernel.org
Tested-by: Ron Economos <re@w6rz.net> # from IRC
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d52fec86a465355b379e839fa372ead0334d62e6 upstream.
HWCAP_LOONGARCH_CPUCFG is missing in elf_hwcap, so add it for glibc's
later use.
Cc: stable@vger.kernel.org
Reported-by: Yinyu Cai <caiyinyu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 57512b57dcfaf63c52d8ad2fb35321328cde31b0 ]
Emerald Rapids RAPL support is the same as previous Sapphire Rapids.
Add Emerald Rapids model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230104145831.25498-2-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f52853a668bfeddd79f319d536a506f68cc2b478 ]
Meteor Lake RAPL support is the same as previous Sky Lake.
Add Meteor Lake model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230104145831.25498-1-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c07311b5509f6035f1dd828db3e90ff4859cf3b9 ]
Since Tigerlake seems to have inherited its cstates and other RAPL power
caps from Icelake, assume it also follows Icelake for its RAPL events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221228113454.1199118-1-rodrigo.vivi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55d235361fccef573990dfa5724ab453866e7816 ]
Fix a warning: "found `movsd'; assuming `movsl' was meant"
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2a81160d29d65b5876ab3f824fda99ae0219f05e upstream.
When creating a new monitoring group, the RMID allocated for it may have
been used by a group which was previously removed. In this case, the
hardware counters will have non-zero values which should be deducted
from what is reported in the new group's counts.
resctrl_arch_reset_rmid() initializes the prev_msr value for counters to
0, causing the initial count to be charged to the new group. Resurrect
__rmid_read() and use it to initialize prev_msr correctly.
Unlike before, __rmid_read() checks for error bits in the MSR read so
that callers don't need to.
Fixes: 1d81d15db39c ("x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221220164132.443083-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe1f0714385fbcf76b0cbceb02b7277d842014fc upstream.
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90b926e68f500844dff16b5bcea178dc55cf580a upstream.
Since
72cbc8f04fe2 ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
PAT can be enabled without MTRR.
This has resulted in problems e.g. for a SEV-SNP guest running under Hyper-V,
when trying to establish a new mapping via memremap() with WB caching mode, as
pat_x_mtrr_type() will call mtrr_type_lookup(), which in turn is returning
MTRR_TYPE_INVALID due to MTRR being disabled in this configuration.
The result is a mapping with UC- caching, leading to severe performance
degradation.
Fix that by handling MTRR_TYPE_INVALID the same way as MTRR_TYPE_WRBACK
in pat_x_mtrr_type() because MTRR_TYPE_INVALID means MTRRs are disabled.
[ bp: Massage commit message. ]
Fixes: 72cbc8f04fe2 ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
Reported-by: Michael Kelley (LINUX) <mikelley@microsoft.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230110065427.20767-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c6dd961d0c8e7e8f9fdc65071fb09ece702e18d upstream.
With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:
arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S: Assembler messages:
arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
Which is due to:
PR gas/29525
Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
templates taking operands, mixed IsString/non-IsString template groups
(with memory operands) cannot occur anymore. With that
maybe_adjust_templates() becomes unnecessary (and is hence being
removed).
More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525
Borislav Petkov further explains:
" the particular problem here is is that the 'd' suffix is
"conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
and the same thing also for string ops (which is the case here) so apparently
the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
and phase out 'd' slowly... "
Fixes: 7a734e7dd93b ("x86, setup: "glove box" BIOS calls -- infrastructure")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76d588dddc459fefa1da96e0a081a397c5c8e216 upstream.
Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.
Command to trigger the warning:
# perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5
Performance counter stats for 'sleep 5':
0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/
5.002117947 seconds time elapsed
0.000131000 seconds user
0.001063000 seconds sys
Below is snippet of the warning in dmesg:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
preempt_count: 2, expected: 0
4 locks held by perf-exec/2869:
#0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
#1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
#2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
#3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
irq event stamp: 4806
hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
__might_resched+0x2f8/0x310
__mutex_lock+0x6c/0x13f0
thread_imc_event_add+0xf4/0x1b0
event_sched_in+0xe0/0x210
merge_sched_in+0x1f0/0x600
visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
ctx_flexible_sched_in+0xcc/0x140
ctx_sched_in+0x20c/0x2a0
ctx_resched+0x104/0x1c0
perf_event_exec+0x340/0x510
begin_new_exec+0x730/0xef0
load_elf_binary+0x3f8/0x1e10
...
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2)
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000
CFAR: c00000000013fb64 IRQMASK: 1
The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.
Fix the issue by changing the mutex lock to spinlock.
Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Fix comments, trim oops in change log, add reported-by tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74c2f81054510d45b813548cb0a1c4ebf87cdd5f upstream.
The page table check trigger BUG_ON() unexpectedly when split hugepage:
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:119!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748
Hardware name: linux,dummy-virt (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_set.isra.0+0x398/0x468
lr : page_table_check_set.isra.0+0x1c0/0x468
[...]
Call trace:
page_table_check_set.isra.0+0x398/0x468
__page_table_check_pte_set+0x160/0x1c0
__split_huge_pmd_locked+0x900/0x1648
__split_huge_pmd+0x28c/0x3b8
unmap_page_range+0x428/0x858
unmap_single_vma+0xf4/0x1c8
zap_page_range+0x2b0/0x410
madvise_vma_behavior+0xc44/0xe78
do_madvise+0x280/0x698
__arm64_sys_madvise+0x90/0xe8
invoke_syscall.constprop.0+0xdc/0x1d8
do_el0_svc+0xf4/0x3f8
el0_svc+0x58/0x120
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x19c/0x1a0
[...]
On arm64, pmd_leaf() will return true even if the pmd is invalid due to
pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count
will not only decrease once but also increase once. Then in set_pte_at(),
the file_map_count increase again, and so trigger BUG_ON() unexpectedly.
Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the
problem.
Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221121073608.4183459-1-liushixin2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb9a85261e297292c4cc44b628c1373c996cedc2 upstream.
We currently guard REGSET_{SSVE, ZA} using ARM64_SVE for no good reason.
Both enumerations would be pointless without ARM64_SME and create two empty
entries in aarch64_regsets[] which would then become part of a process's
native regset view (they should be ignored though).
Switch to use ARM64_SME instead.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221214135943.379-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 730a11f982e61aaef758ab552dfb7c30de79e99b upstream.
Add check for the executable case in pud_user_accessible_page() too
like what we did for pte and pmd.
Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221122123137.429686-1-liushixin2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7dde62f0687c8856b6c0660066c7ee83a6a6f033 upstream.
Currently we reject an attempt to restore a SVE signal frame on a system
with SME but not SVE supported. This means that it is not possible to
disable streaming mode via signal return as this is configured via the
flags in the SVE signal context. Instead accept the signal frame, we will
require it to have a vector length of 0 specified and no payload since the
task will have no SVE vector length configured.
Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-2-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f26cd7372160da2eba31061d7943348ab9f2c01d upstream.
Currently we only allocate space for SVE signal frames on systems that
support SVE, meaning that SME only systems do not allocate a signal frame
for streaming mode SVE state. Change the check so space is allocated if
either feature is supported.
Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-3-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e3f360db08d55a14112bd27454e616a24296a8b0 upstream.
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82d3edb50a11bf3c5ef63294d5358ba230181413 upstream.
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
For example:
/* Reset trailer (using compare-double-and-swap) */
do {
te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
te_flags |= SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
te->flags, te->overflow,
te_flags, 0ULL));
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19e183b54528f11fafeca60fc6d0821e29ff281e upstream.
A subsequent fix for arm64 will use this parameter to parse the vma
information from the snapshot created by dump_vma_snapshot() rather than
traversing the vma list without the mmap_lock.
Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2337a40e04dde1692b5b0a46ecc59f89aaba8a1 upstream.
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 031af50045ea97ed4386eb3751ca2c134d0fc911 upstream.
The inline assembly for arm64's cmpxchg_double*() implementations use a
+Q constraint to hazard against other accesses to the memory location
being exchanged. However, the pointer passed to the constraint is a
pointer to unsigned long, and thus the hazard only applies to the first
8 bytes of the location.
GCC can take advantage of this, assuming that other portions of the
location are unchanged, leading to a number of potential problems.
This is similar to what we fixed back in commit:
fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable")
... but we forgot to adjust cmpxchg_double*() similarly at the same
time.
The same problem applies, as demonstrated with the following test:
| struct big {
| u64 lo, hi;
| } __aligned(128);
|
| unsigned long foo(struct big *b)
| {
| u64 hi_old, hi_new;
|
| hi_old = b->hi;
| cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78);
| hi_new = b->hi;
|
| return hi_old ^ hi_new;
| }
... which GCC 12.1.0 compiles as:
| 0000000000000000 <foo>:
| 0: d503233f paciasp
| 4: aa0003e4 mov x4, x0
| 8: 1400000e b 40 <foo+0x40>
| c: d2800240 mov x0, #0x12 // #18
| 10: d2800681 mov x1, #0x34 // #52
| 14: aa0003e5 mov x5, x0
| 18: aa0103e6 mov x6, x1
| 1c: d2800ac2 mov x2, #0x56 // #86
| 20: d2800f03 mov x3, #0x78 // #120
| 24: 48207c82 casp x0, x1, x2, x3, [x4]
| 28: ca050000 eor x0, x0, x5
| 2c: ca060021 eor x1, x1, x6
| 30: aa010000 orr x0, x0, x1
| 34: d2800000 mov x0, #0x0 // #0 <--- BANG
| 38: d50323bf autiasp
| 3c: d65f03c0 ret
| 40: d2800240 mov x0, #0x12 // #18
| 44: d2800681 mov x1, #0x34 // #52
| 48: d2800ac2 mov x2, #0x56 // #86
| 4c: d2800f03 mov x3, #0x78 // #120
| 50: f9800091 prfm pstl1strm, [x4]
| 54: c87f1885 ldxp x5, x6, [x4]
| 58: ca0000a5 eor x5, x5, x0
| 5c: ca0100c6 eor x6, x6, x1
| 60: aa0600a6 orr x6, x5, x6
| 64: b5000066 cbnz x6, 70 <foo+0x70>
| 68: c8250c82 stxp w5, x2, x3, [x4]
| 6c: 35ffff45 cbnz w5, 54 <foo+0x54>
| 70: d2800000 mov x0, #0x0 // #0 <--- BANG
| 74: d50323bf autiasp
| 78: d65f03c0 ret
Notice that at the lines with "BANG" comments, GCC has assumed that the
higher 8 bytes are unchanged by the cmpxchg_double() call, and that
`hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and
LL/SC versions of cmpxchg_double().
This patch fixes the issue by passing a pointer to __uint128_t into the
+Q constraint, ensuring that the compiler hazards against the entire 16
bytes being modified.
With this change, GCC 12.1.0 compiles the above test as:
| 0000000000000000 <foo>:
| 0: f9400407 ldr x7, [x0, #8]
| 4: d503233f paciasp
| 8: aa0003e4 mov x4, x0
| c: 1400000f b 48 <foo+0x48>
| 10: d2800240 mov x0, #0x12 // #18
| 14: d2800681 mov x1, #0x34 // #52
| 18: aa0003e5 mov x5, x0
| 1c: aa0103e6 mov x6, x1
| 20: d2800ac2 mov x2, #0x56 // #86
| 24: d2800f03 mov x3, #0x78 // #120
| 28: 48207c82 casp x0, x1, x2, x3, [x4]
| 2c: ca050000 eor x0, x0, x5
| 30: ca060021 eor x1, x1, x6
| 34: aa010000 orr x0, x0, x1
| 38: f9400480 ldr x0, [x4, #8]
| 3c: d50323bf autiasp
| 40: ca0000e0 eor x0, x7, x0
| 44: d65f03c0 ret
| 48: d2800240 mov x0, #0x12 // #18
| 4c: d2800681 mov x1, #0x34 // #52
| 50: d2800ac2 mov x2, #0x56 // #86
| 54: d2800f03 mov x3, #0x78 // #120
| 58: f9800091 prfm pstl1strm, [x4]
| 5c: c87f1885 ldxp x5, x6, [x4]
| 60: ca0000a5 eor x5, x5, x0
| 64: ca0100c6 eor x6, x6, x1
| 68: aa0600a6 orr x6, x5, x6
| 6c: b5000066 cbnz x6, 78 <foo+0x78>
| 70: c8250c82 stxp w5, x2, x3, [x4]
| 74: 35ffff45 cbnz w5, 5c <foo+0x5c>
| 78: f9400480 ldr x0, [x4, #8]
| 7c: d50323bf autiasp
| 80: ca0000e0 eor x0, x7, x0
| 84: d65f03c0 ret
... sampling the high 8 bytes before and after the cmpxchg, and
performing an EOR, as we'd expect.
For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note
that linux-4.9.y is oldest currently supported stable release, and
mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run
on my machines due to library incompatibilities.
I've also used a standalone test to check that we can use a __uint128_t
pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM
3.9.1.
Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double")
Fixes: e9a4b795652f ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/
Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f4c549feb4ecca95ae9abb88887b941d196f83a upstream.
The MTE coredump code in arch/arm64/kernel/elfcore.c iterates over the
vma list without the mmap_lock held. This can race with another process
or userfaultfd concurrently modifying the vma list. Change the
for_each_mte_vma macro and its callers to instead use the vma snapshot
taken by dump_vma_snapshot() and stored in the cprm object.
Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-4-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|