summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-09-24kvm: x86: fix two typos in commentTiejun Chen2-2/+2
s/drity/dirty and s/vmsc01/vmcs01 Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: vmx: Inject #GP on invalid PAT CRNadav Amit3-2/+7
Guest which sets the PAT CR to invalid value should get a #GP. Currently, if vmx supports loading PAT CR during entry, then the value is not checked. This patch makes the required check in that case. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: x86: emulating descriptor load misses long-mode caseNadav Amit1-0/+9
In 64-bit mode a #GP should be delivered to the guest "if the code segment descriptor pointed to by the selector in the 64-bit gate doesn't have the L-bit set and the D-bit clear." - Intel SDM "Interrupt 13—General Protection Exception (#GP)". This patch fixes the behavior of CS loading emulation code. Although the comment says that segment loading is not supported in long mode, this function is executed in long mode, so the fix is necassary. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: x86: directly use kvm_make_request againLiang Chen4-14/+7
A one-line wrapper around kvm_make_request is not particularly useful. Replace kvm_mmu_flush_tlb() with kvm_make_request(). Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: x86: count actual tlb flushesRadim Krčmář2-2/+7
- we count KVM_REQ_TLB_FLUSH requests, not actual flushes (KVM can have multiple requests for one flush) - flushes from kvm_flush_remote_tlbs aren't counted - it's easy to make a direct request by mistake Solve these by postponing the counting to kvm_check_request(). Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: nested VMX: disable perf cpuid reportingMarcelo Tosatti2-0/+8
Initilization of L2 guest with -cpu host, on L1 guest with -cpu host triggers: (qemu) KVM: entry failed, hardware error 0x7 ... nested_vmx_run: VMCS MSR_{LOAD,STORE} unsupported Nested VMX MSR load/store support is not sufficient to allow perf for L2 guest. Until properly fixed, trap CPUID and disable function 0xA. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: x86: Don't report guest userspace emulation error to userspaceNadav Amit1-1/+1
Commit fc3a9157d314 ("KVM: X86: Don't report L2 emulation failures to user-space") disabled the reporting of L2 (nested guest) emulation failures to userspace due to race-condition between a vmexit and the instruction emulator. The same rational applies also to userspace applications that are permitted by the guest OS to access MMIO area or perform PIO. This patch extends the current behavior - of injecting a #UD instead of reporting it to userspace - also for guest userspace code. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24kvm: Make init_rmode_tss() return 0 on success.Paolo Bonzini1-10/+3
In init_rmode_tss(), there two variables indicating the return value, r and ret, and it return 0 on error, 1 on success. The function is only called by vmx_set_tss_addr(), and ret is redundant. This patch removes the redundant variable, by making init_rmode_tss() return 0 on success, -errno on failure. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: x86: Warn if guest virtual address space is not 48-bitsNadav Amit2-8/+15
The KVM emulator code assumes that the guest virtual address space (in 64-bit) is 48-bits wide. Fail the KVM_SET_CPUID and KVM_SET_CPUID2 ioctl if userspace tries to create a guest that does not obey this restriction. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17kvm: Make init_rmode_identity_map() return 0 on success.Tang Chen1-10/+8
In init_rmode_identity_map(), there two variables indicating the return value, r and ret, and it return 0 on error, 1 on success. The function is only called by vmx_create_vcpu(), and ret is redundant. This patch removes the redundant variable, and makes init_rmode_identity_map() return 0 on success, -errno on failure. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17kvm: Remove ept_identity_pagetable from struct kvm_arch.Tang Chen3-28/+22
kvm_arch->ept_identity_pagetable holds the ept identity pagetable page. But it is never used to refer to the page at all. In vcpu initialization, it indicates two things: 1. indicates if ept page is allocated 2. indicates if a memory slot for identity page is initialized Actually, kvm_arch->ept_identity_pagetable_done is enough to tell if the ept identity pagetable is initialized. So we can remove ept_identity_pagetable. NOTE: In the original code, ept identity pagetable page is pinned in memroy. As a result, it cannot be migrated/hot-removed. After this patch, since kvm_arch->ept_identity_pagetable is removed, ept identity pagetable page is no longer pinned in memory. And it can be migrated/hot-removed. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-17KVM: s390: register flic ops dynamicallyCornelia Huck2-1/+3
Using the new kvm_register_device_ops() interface makes us get rid of an #ifdef in common code. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16KVM: x86: Use kvm_make_request when applicableGuo Hui Liu1-8/+7
This patch replace the set_bit method by kvm_make_request to make code more readable and consistent. Signed-off-by: Guo Hui Liu <liuguohui@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-11KVM: x86: make apic_accept_irq tracepoint more genericPaolo Bonzini2-9/+6
Initially the tracepoint was added only to the APIC_DM_FIXED case, also because it reported coalesced interrupts that only made sense for that case. However, the coalesced argument is not used anymore and tracing other delivery modes is useful, so hoist the call out of the switch statement. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-11kvm: Use APIC_DEFAULT_PHYS_BASE macro as the apic access page address.Tang Chen2-4/+5
We have APIC_DEFAULT_PHYS_BASE defined as 0xfee00000, which is also the address of apic access page. So use this macro. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-11Merge tag 'kvm-s390-next-20140910' of ↵Paolo Bonzini6-20/+74
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: Fixes and features for next (3.18) 1. Crypto/CPACF support: To enable the MSA4 instructions we have to provide a common control structure for each SIE control block 2. Two cleanups found by a static code checker: one redundant assignment and one useless if 3. Fix the page handling of the diag10 ballooning interface. If the guest freed the pages at absolute 0 some checks and frees were incorrect 4. Limit guests to 16TB 5. Add __must_check to interrupt injection code
2014-09-10KVM: s390/interrupt: remove double assignmentChristian Borntraeger1-1/+0
r is already initialized to 0. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2014-09-10KVM: s390/cmm: Fix prefix handling for diag 10 balloonChristian Borntraeger1-8/+18
The old handling of prefix pages was broken in the diag10 ballooner. We now rely on gmap_discard to check for start > end and do a slow path if the prefix swap pages are affected: 1. discard the pages from start to prefix 2. discard the absolute 0 pages 3. discard the pages after prefix swap to end Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2014-09-10KVM: s390: get rid of constant condition in ipte_unlock_simpleChristian Borntraeger1-2/+1
Due to the earlier check we know that ipte_lock_count must be 0. No need to add a useless if. Let's make clear that we are going to always wakeup when we execute that code. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-09-10KVM: s390: unintended fallthrough for external callChristian Borntraeger1-0/+1
We must not fallthrough if the conditions for external call are not met. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: stable@vger.kernel.org
2014-09-10KVM: s390: Limit guest size to 16TBChristian Borntraeger1-1/+1
Currently we fill up a full 5 level page table to hold the guest mapping. Since commit "support gmap page tables with less than 5 levels" we can do better. Having more than 4 TB might be useful for some testing scenarios, so let's just limit ourselves to 16TB guest size. Having more than that is totally untested as I do not have enough swap space/memory. We continue to allow ucontrol the full size. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-10KVM: s390: add __must_check to interrupt deliver functionsChristian Borntraeger2-7/+7
We now propagate interrupt injection errors back to the ioctl. We should mark functions that might fail with __must_check. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
2014-09-10KVM: CPACF: Enable MSA4 instructions for kvm guestTony Krowiak2-1/+46
We have to provide a per guest crypto block for the CPUs to enable MSA4 instructions. According to icainfo on z196 or later this enables CCM-AES-128, CMAC-AES-128, CMAC-AES-192 and CMAC-AES-256. Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split MSA4/protected key into two patches]
2014-09-05KVM: x86: propagate exception from permission checks on the nested page faultPaolo Bonzini4-11/+16
Currently, if a permission error happens during the translation of the final GPA to HPA, walk_addr_generic returns 0 but does not fill in walker->fault. To avoid this, add an x86_exception* argument to the translate_gpa function, and let it fill in walker->fault. The nested_page_fault field will be true, since the walk_mmu is the nested_mmu and translate_gpu instead operates on the "outer" (NPT) instance. Reported-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-05KVM: x86: skip writeback on injection of nested exceptionPaolo Bonzini2-6/+10
If a nested page fault happens during emulation, we will inject a vmexit, not a page fault. However because writeback happens after the injection, we will write ctxt->eip from L2 into the L1 EIP. We do not write back if an instruction caused an interception vmexit---do the same for page faults. Suggested-by: Gleb Natapov <gleb@kernel.org> Reviewed-by: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03KVM: nSVM: propagate the NPF EXITINFO to the guestPaolo Bonzini2-4/+32
This is similar to what the EPT code does with the exit qualification. This allows the guest to see a valid value for bits 33:32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMDPaolo Bonzini2-2/+19
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs, but reserves it in PDPEs and PML4Es. The SVM test is relying on this behavior, so enforce it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03KVM: mmio: cleanup kvm_set_mmio_spte_maskTiejun Chen3-6/+6
Just reuse rsvd_bits() inside kvm_set_mmio_spte_mask() for slightly better code. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03kvm: x86: fix stale mmio cache bugDavid Matlack3-6/+17
The following events can lead to an incorrect KVM_EXIT_MMIO bubbling up to userspace: (1) Guest accesses gpa X without a memory slot. The gfn is cached in struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets the SPTE write-execute-noread so that future accesses cause EPT_MISCONFIGs. (2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION covering the page just accessed. (3) Guest attempts to read or write to gpa X again. On Intel, this generates an EPT_MISCONFIG. The memory slot generation number that was incremented in (2) would normally take care of this but we fast path mmio faults through quickly_check_mmio_pf(), which only checks the per-vcpu mmio cache. Since we hit the cache, KVM passes a KVM_EXIT_MMIO up to userspace. This patch fixes the issue by using the memslot generation number to validate the mmio cache. Cc: stable@vger.kernel.org Signed-off-by: David Matlack <dmatlack@google.com> [xiaoguangrong: adjust the code to make it simpler for stable-tree fix.] Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Tested-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03kvm: fix potentially corrupt mmio cacheDavid Matlack1-8/+12
vcpu exits and memslot mutations can run concurrently as long as the vcpu does not aquire the slots mutex. Thus it is theoretically possible for memslots to change underneath a vcpu that is handling an exit. If we increment the memslot generation number again after synchronize_srcu_expedited(), vcpus can safely cache memslot generation without maintaining a single rcu_dereference through an entire vm exit. And much of the x86/kvm code does not maintain a single rcu_dereference of the current memslots during each exit. We can prevent the following case: vcpu (CPU 0) | thread (CPU 1) --------------------------------------------+-------------------------- 1 vm exit | 2 srcu_read_unlock(&kvm->srcu) | 3 decide to cache something based on | old memslots | 4 | change memslots | (increments generation) 5 | synchronize_srcu(&kvm->srcu); 6 retrieve generation # from new memslots | 7 tag cache with new memslot generation | 8 srcu_read_unlock(&kvm->srcu) | ... | <action based on cache occurs even | though the caching decision was based | on the old memslots> | ... | <action *continues* to occur until next | memslot generation change, which may | be never> | | By incrementing the generation after synchronizing with kvm->srcu readers, we ensure that the generation retrieved in (6) will become invalid soon after (8). Keeping the existing increment is not strictly necessary, but we do keep it and just move it for consistency from update_memslots to install_new_memslots. It invalidates old cached MMIOs immediately, instead of having to wait for the end of synchronize_srcu_expedited, which makes the code more clearly correct in case CPU 1 is preempted right after synchronize_srcu() returns. To avoid halving the generation space in SPTEs, always presume that the low bit of the generation is zero when reconstructing a generation number out of an SPTE. This effectively disables MMIO caching in SPTEs during the call to synchronize_srcu_expedited. Using the low bit this way is somewhat like a seqcount---where the protected thing is a cache, and instead of retrying we can simply punt if we observe the low bit to be 1. Cc: stable@vger.kernel.org Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03KVM: do not bias the generation number in kvm_current_mmio_generationPaolo Bonzini1-6/+1
The next patch will give a meaning (a la seqcount) to the low bit of the generation number. Ensure that it matches between kvm->memslots->generation and kvm_current_mmio_generation(). Cc: stable@vger.kernel.org Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: x86: use guest maxphyaddr to check MTRR valuesPaolo Bonzini1-3/+2
The check introduced in commit d7a2a246a1b5 (KVM: x86: #GP when attempts to write reserved bits of Variable Range MTRRs, 2014-08-19) will break if the guest maxphyaddr is higher than the host's (which sometimes happens depending on your hardware and how QEMU is configured). To fix this, use cpuid_maxphyaddr similar to how the APIC_BASE MSR does already. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: remove garbage arg to *hardware_{en,dis}ableRadim Krčmář14-23/+23
In the beggining was on_each_cpu(), which required an unused argument to kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten. Remove unnecessary arguments that stem from this. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: static inline empty kvm_arch functionsRadim Krčmář11-163/+57
Using static inline is going to save few bytes and cycles. For example on powerpc, the difference is 700 B after stripping. (5 kB before) This patch also deals with two overlooked empty functions: kvm_arch_flush_shadow was not removed from arch/mips/kvm/mips.c 2df72e9bc KVM: split kvm_arch_flush_shadow and kvm_arch_sched_in never made it into arch/ia64/kvm/kvm-ia64.c. e790d9ef6 KVM: add kvm_arch_sched_in Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: forward declare structs in kvm_types.hPaolo Bonzini7-28/+7
Opaque KVM structs are useful for prototypes in asm/kvm_host.h, to avoid "'struct foo' declared inside parameter list" warnings (and consequent breakage due to conflicting types). Move them from individual files to a generic place in linux/kvm_types.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: x86: remove Aligned bit from movntps/movntpdPaolo Bonzini1-3/+3
These are not explicitly aligned, and do not require alignment on AVX. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: x86 emulator: emulate MOVNTDQAlex Williamson1-1/+6
Windows 8.1 guest with NVIDIA driver and GPU fails to boot with an emulation failure. The KVM spew suggests the fault is with lack of movntdq emulation (courtesy of Paolo): Code=02 00 00 b8 08 00 00 00 f3 0f 6f 44 0a f0 f3 0f 6f 4c 0a e0 <66> 0f e7 41 f0 66 0f e7 49 e0 48 83 e9 40 f3 0f 6f 44 0a 10 f3 0f 6f 0c 0a 66 0f e7 41 10 $ as -o a.out .section .text .byte 0x66, 0x0f, 0xe7, 0x41, 0xf0 .byte 0x66, 0x0f, 0xe7, 0x49, 0xe0 $ objdump -d a.out 0: 66 0f e7 41 f0 movntdq %xmm0,-0x10(%rcx) 5: 66 0f e7 49 e0 movntdq %xmm1,-0x20(%rcx) Add the necessary emulation. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: vmx: VMXOFF emulation in vm86 should cause #UDNadav Amit1-6/+8
Unlike VMCALL, the instructions VMXOFF, VMLAUNCH and VMRESUME should cause a UD exception in real-mode or vm86. However, the emulator considers all these instructions the same for the matter of mode checks, and emulation upon exit due to #UD exception. As a result, the hypervisor behaves incorrectly on vm86 mode. VMXOFF, VMLAUNCH or VMRESUME cause on vm86 exit due to #UD. The hypervisor then emulates these instruction and inject #GP to the guest instead of #UD. This patch creates a new group for these instructions and mark only VMCALL as an instruction which can be emulated. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: x86: fix some sparse warningsPaolo Bonzini2-7/+7
Sparse reports the following easily fixed warnings: arch/x86/kvm/vmx.c:8795:48: sparse: Using plain integer as NULL pointer arch/x86/kvm/vmx.c:2138:5: sparse: symbol vmx_read_l1_tsc was not declared. Should it be static? arch/x86/kvm/vmx.c:6151:48: sparse: Using plain integer as NULL pointer arch/x86/kvm/vmx.c:8851:6: sparse: symbol vmx_sched_in was not declared. Should it be static? arch/x86/kvm/svm.c:2162:5: sparse: symbol svm_read_l1_tsc was not declared. Should it be static? Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: nVMX: nested TPR shadow/threshold emulationWanpeng Li1-3/+51
This patch fix bug https://bugzilla.kernel.org/show_bug.cgi?id=61411 TPR shadow/threshold feature is important to speed up the Windows guest. Besides, it is a must feature for certain VMM. We map virtual APIC page address and TPR threshold from L1 VMCS. If TPR_BELOW_THRESHOLD VM exit is triggered by L2 guest and L1 interested in, we inject it into L1 VMM for handling. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> [Add PAGE_ALIGNED check, do not write useless virtual APIC page address if TPR shadowing is disabled. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: nVMX: introduce nested_get_vmcs12_pagesWanpeng Li1-12/+25
Introduce function nested_get_vmcs12_pages() to check the valid of nested apic access page and virtual apic page earlier. Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: s390/mm: fix up indentation of set_guest_storage_keyChristian Borntraeger1-6/+6
commit ab3f285f227f ("KVM: s390/mm: try a cow on read only pages for key ops")' misaligned a code block. Let's fixup the indentation. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-26Merge tag 'kvm-s390-next-20140825' of ↵Paolo Bonzini12-585/+497
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and features for 3.18 part 1 1. The usual cleanups: get rid of duplicate code, use defines, factor out the sync_reg handling, additional docs for sync_regs, better error handling on interrupt injection 2. We use KVM_REQ_TLB_FLUSH instead of open coding tlb flushes 3. Additional registers for kvm_run sync regs. This is usually not needed in the fast path due to eventfd/irqfd, but kvm stat claims that we reduced the overhead of console output by ~50% on my system 4. A rework of the gmap infrastructure. This is the 2nd step towards host large page support (after getting rid of the storage key dependency). We introduces two radix trees to store the guest-to-host and host-to-guest translations. This gets us rid of most of the page-table walks in the gmap code. Only one in __gmap_link is left, this one is required to link the shadow page table to the process page table. Finally this contains the plumbing to support gmap page tables with less than 5 levels.
2014-08-26KVM: s390/mm: remove outdated gmap data structuresMartin Schwidefsky1-23/+0
The radix tree rework removed all code that uses the gmap_rmap and gmap_pgtable data structures. Remove these outdated definitions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-26KVM: s390/mm: support gmap page tables with less than 5 levelsMartin Schwidefsky3-33/+59
Add an addressing limit to the gmap address spaces and only allocate the page table levels that are needed for the given limit. The limit is fixed and can not be changed after a gmap has been created. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-26KVM: s390/mm: use radix trees for guest to host mappingsMartin Schwidefsky7-383/+308
Store the target address for the gmap segments in a radix tree instead of using invalid segment table entries. gmap_translate becomes a simple radix_tree_lookup, gmap_fault is split into the address translation with gmap_translate and the part that does the linking of the gmap shadow page table with the process page table. A second radix tree is used to keep the pointers to the segment table entries for segments that are mapped in the guest address space. On unmap of a segment the pointer is retrieved from the radix tree and is used to carry out the segment invalidation in the gmap shadow page table. As the radix tree can only store one pointer, each host segment may only be mapped to exactly one guest location. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-25kvm: x86: fix tracing for 32-bitPaolo Bonzini1-2/+2
Fix commit 7b46268d29543e313e731606d845e65c17f232e4, which mistakenly included the new tracepoint under #ifdef CONFIG_X86_64. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-25Merge tag 'kvm-s390-20140825' of ↵Paolo Bonzini2-13/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Here are two fixes for s390 KVM code that prevent: 1. a malicious user to trigger a kernel BUG 2. a malicious user to change the storage key of read-only pages
2014-08-25KVM: s390/mm: cleanup gmap function arguments, variable namesMartin Schwidefsky7-70/+72
Make the order of arguments for the gmap calls more consistent, if the gmap pointer is passed it is always the first argument. In addition distinguish between guest address and user address by naming the variables gaddr for a guest address and vmaddr for a user address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-08-25KVM: s390/mm: readd address parameter to gmap_do_ipte_notifyMartin Schwidefsky2-3/+4
Revert git commit c3a23b9874c1 ("remove unnecessary parameter from gmap_do_ipte_notify"). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 22:12:45 +0300