summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2015-11-19arm64: bpf: fix buffer pointerZi Shen Lim1-14/+13
During code review, I noticed we were passing a bad buffer pointer to bpf_load_pointer helper function called by jitted code. Point to the buffer allocated by JIT, so we don't silently corrupt other parts of the stack. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18Merge branch 'for-linus' of ↵Linus Torvalds18-243/+160
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Assorted bug fixes, the mlock2 system call gets added, and one improvement. The boot from dasd devices is now possible from a wider range of devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove SALIPL loader s390: wire up mlock2 system call s390: remove g5 elf platform support s390: avoid cache aliasing under z/VM and KVM s390/sclp: _sclp_wait_int(): retain full PSW mask s390/zcrypt: Fix initialisation when zcrypt is built-in s390/zcrypt: Fix kernel crash on systems without AP bus support s390: add support for ipl devices in subchannel sets > 0 s390/ipl: fix out of bounds access in scpdata_write s390/pci_dma: improve debugging of errors during dma map s390/pci_dma: handle dma table failures s390/pci_dma: unify label of invalid translation table entries s390/syscalls: remove system call number calculation s390/cio: simplify css_generate_pgid s390/diag: add a s390 prefix to the diagnose trace point s390/head: fix error message on unsupported hardware
2015-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-8/+42
Pull networking fixes from David Miller: 1) Fix list tests in netfilter ingress support, from Florian Westphal. 2) Fix reversal of input and output interfaces in ingress hook invocation, from Pablo Neira Ayuso. 3) We have a use after free in r8169, caught by Dave Jones, fixed by Francois Romieu. 4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa. 5) Three ipv6 route handling bug fixes from Martin KaFai Lau: a) Don't create clone routes not managed by the fib6 tree b) Don't forget to check expiration of DST_NOCACHE routes. c) Handle rt->dst.from == NULL properly. 6) Several AF_PACKET fixes wrt transport header setting and SKB protocol setting, from Daniel Borkmann. 7) Fix thunder driver crash on shutdown, from Pavel Fedin. 8) Several Mellanox driver fixes (max MTU calculations, use of correct DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich. 9) Several mv88e6060 DSA driver fixes (wrong bit definitions for certain registers, etc.) from Neil Armstrong. 10) Make sure to disable preemption while updating per-cpu stats of ip tunnels, from Jason A. Donenfeld. 11) Various ARM64 bpf JIT fixes, from Yang Shi. 12) Flush icache properly in ARM JITs, from Daniel Borkmann. 13) Fix masking of RX and TX interrupts in ravb driver, from Masaru Nagai. 14) Fix netdev feature propagation for devices not implementing ->ndo_set_features(). From Nikolay Aleksandrov. 15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare. 16) RAW socket code increments incorrect SNMP counters, fix from Ben Cartwright-Cox. 17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman. 18) Fix handling of VLAN headers on stacked devices when REORDER is disabled. From Vlad Yasevich. 19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) MAINTAINERS: Update Mellanox's Eth NIC driver entries net/core: revert "net: fix __netdev_update_features return.." and add comment af_unix: take receive queue lock while appending new skb rtnetlink: fix frame size warning in rtnl_fill_ifinfo net: use skb_clone to avoid alloc_pages failure. packet: Use PAGE_ALIGNED macro packet: Don't check frames_per_block against negative values net: phy: Use interrupts when available in NOLINK state phy: marvell: Add support for 88E1540 PHY arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS macvlan: fix leak in macvlan_handle_frame ipvlan: fix use after free of skb ipvlan: fix leak in ipvlan_rcv_frame vlan: Do not put vlan headers back on bridge and macvlan ports vlan: Fix untag operations of stacked vlans with REORDER_HEADER off via-velocity: unconditionally drop frames with bad l2 length ipg: Remove ipg driver dl2k: Add support for IP1000A-based cards snmp: Remove duplicate OUTMCAST stat increment net: thunder: Check for driver data in nicvf_remove() ...
2015-11-17arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCSYang Shi1-5/+39
Save and restore FP/LR in BPF prog prologue and epilogue, save SP to FP in prologue in order to get the correct stack backtrace. However, ARM64 JIT used FP (x29) as eBPF fp register, FP is subjected to change during function call so it may cause the BPF prog stack base address change too. Use x25 to replace FP as BPF stack base register (fp). Since x25 is callee saved register, so it will keep intact during function call. It is initialized in BPF prog prologue when BPF prog is started to run everytime. Save and restore x25/x26 in BPF prologue and epilogue to keep them intact for the outside of BPF. Actually, x26 is unnecessary, but SP requires 16 bytes alignment. So, the BPF stack layout looks like: high original A64_SP => 0:+-----+ BPF prologue |FP/LR| current A64_FP => -16:+-----+ | ... | callee saved registers +-----+ | | x25/x26 BPF fp register => -80:+-----+ | | | ... | BPF prog stack | | | | current A64_SP => +-----+ | | | ... | Function call stack | | +-----+ low CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16bpf, arm64: start flushing icache range from headerDaniel Borkmann1-1/+1
While recently going over ARM64's BPF code, I noticed that the icache range we're flushing should start at header already and not at ctx.image. Reason is that after b569c1c622c5 ("net: bpf: arm64: address randomize and write protect JIT code"), we also want to make sure to flush the random-sized trap in front of the start of the actual program (analogous to x86). No operational differences from user side. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16bpf, arm: start flushing icache range from headerDaniel Borkmann1-1/+1
During review I noticed that the icache range we're flushing should start at header already and not at ctx.image. Reason is that after 55309dd3d4cd ("net: bpf: arm: address randomize and write protect JIT code"), we also want to make sure to flush the random-sized trap in front of the start of the actual program (analogous to x86). No operational differences from user side. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nicolas Schichan <nschichan@freebox.fr> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16arm64: bpf: fix JIT frame pointer setupYang Shi1-3/+3
BPF fp should point to the top of the BPF prog stack. The original implementation made it point to the bottom incorrectly. Move A64_SP to fp before reserve BPF prog stack space. CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Signed-off-by: Yang Shi <yang.shi@linaro.org> Reviewed-by: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16s390: remove SALIPL loaderHeiko Carstens1-79/+8
There is no known user, therefore remove the code. Acked-by: Rob Van Der Heij <robvdheij@nl.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: wire up mlock2 system callHeiko Carstens3-1/+4
Passes mlock2-tests test case in 64 bit and compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: remove g5 elf platform supportHeiko Carstens1-3/+0
Remove dead code, since this could only happen on a 31 bit machine where the kernel wouldn't IPL. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: avoid cache aliasing under z/VM and KVMMartin Schwidefsky4-86/+23
commit 1f6b83e5e4d3 ("s390: avoid z13 cache aliasing") checks for the machine type to optimize address space randomization and zero page allocation to avoid cache aliases. This check might fail under a hypervisor with migration support. z/VMs "Single System Image and Live Guest Relocation" facility will "fake" the machine type of the oldest system in the group. For example in a group of zEC12 and Z13 the guest appears to run on a zEC12 (architecture fencing within the relocation domain) Remove the machine type detection and always use cache aliasing rules that are known to work for all machines. These are the z13 aliasing rules. Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Mostly updates to the perf tool plus two fixes to the kernel core code: - Handle tracepoint filters correctly for inherited events (Peter Zijlstra) - Prevent a deadlock in perf_lock_task_context (Paul McKenney) - Add missing newlines to some pr_err() calls (Arnaldo Carvalho de Melo) - Print full source file paths when using 'perf annotate --print-line --full-paths' (Michael Petlan) - Fix 'perf probe -d' when just one out of uprobes and kprobes is enabled (Wang Nan) - Add compiler.h to list.h to fix 'make perf-tar-src-pkg' generated tarballs, i.e. out of tree building (Arnaldo Carvalho de Melo) - Add the llvm-src-base.c and llvm-src-kbuild.c files, generated by the 'perf test' LLVM entries, when running it in-tree, to .gitignore (Yunlong Song) - libbpf error reporting improvements, using a strerror interface to more precisely tell the user about problems with the provided scriptlet, be it in C or as a ready made object file (Wang Nan) - Do not be case sensitive when searching for matching 'perf test' entries (Arnaldo Carvalho de Melo) - Inform the user about objdump failures in 'perf annotate' (Andi Kleen) - Improve the LLVM 'perf test' entry, introduce a new ones for BPF and kbuild tests to check the environment used by clang to compile .c scriptlets (Wang Nan)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macro tools include: Add compiler.h to list.h perf probe: Verify parameters in two functions perf session: Add missing newlines to some pr_err() calls perf annotate: Support full source file paths for srcline fix perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignore perf: Fix inherited events vs. tracepoint filters perf: Disable IRQs across RCU RS CS that acquires scheduler lock perf test: Do not be case sensitive when searching for matching tests perf test: Add 'perf test BPF' perf test: Enhance the LLVM tests: add kbuild test perf test: Enhance the LLVM test: update basic BPF test program perf bpf: Improve BPF related error messages perf tools: Make fetch_kernel_version() publicly available bpf tools: Add new API bpf_object__get_kversion() bpf tools: Improve libbpf error reporting perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancy perf annotate: Inform the user about objdump failures in --stdio perf stat: Make stat options global perf sched latency: Fix thread pid reuse issue ...
2015-11-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds9-16/+73
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixes and updates related to x86: - Fix the W+X check regression on XEN - The real fix for the low identity map trainwreck - Probe legacy PIC early instead of unconditionally allocating legacy irqs - Add cpu verification to long mode entry - Adjust the cache topology to AMD Fam17H systems - Let Merrifield use the TSC across S3" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Call verify_cpu() after having entered long mode too x86/setup: Fix low identity map for >= 2GB kernel range x86/mm: Skip the hypervisor range when walking PGD x86/AMD: Fix last level cache topology for AMD Fam17h systems x86/irq: Probe for PIC presence before allocating descs for legacy IRQs x86/cpu/intel: Enable X86_FEATURE_NONSTOP_TSC_S3 for Merrifield
2015-11-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds147-746/+4472
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
2015-11-14Merge tag 'arc-4.4-rc1-part2' of ↵Linus Torvalds7-55/+73
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Found a couple of brown paper bag bugs with the prev pull request (including a SMP build breakage report from Guenter). Since these are urgent I also decided to send over a bunch of other pending fixes which could have otherwise waited an rc or two. Summary: - A bunch of brown paper bag bugs (MAINTAINERS list email, SMP build failure) - cpu_relax() now compiler barrier for UP as well - handling of userspace Bus Errors for ARCompact builds" * tag 'arc-4.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix silly typo in MAINTAINERS file ARC: cpu_relax() to be compiler barrier even for UP ARC: use ASL assembler mnemonic ARC: [arcompact] Handle bus error from userspace as Interrupt not exception ARC: remove extraneous header include ARCv2: lib: memcpy: use local symbols
2015-11-14ARC: cpu_relax() to be compiler barrier even for UPVineet Gupta1-4/+0
cpu_relax() on ARC has been barrier only for SMP (and no-op for UP). Per recent discussions, it is safer to make it a compiler barrier unconditionally. Link: http://lkml.kernel.org/r/53A7D3AA.9020100@synopsys.com Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: use ASL assembler mnemonicVineet Gupta1-3/+3
ARCompact and ARCv2 only have ASL, while binutils used to support LSL as a alias mnemonic. Newer binutils (upstream) don't want to do that so replace it. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: [arcompact] Handle bus error from userspace as Interrupt not exceptionVineet Gupta3-21/+44
Bus errors from userspace on ARCompact based cores are handled by core as a high priority L2 interrupt but current code treated it as interrupt Handling an interrupt like exception is certainly not going to go unnoticed. (and it worked so far as we never saw a Bus error from userspace until IPPK guys tested a DDR controller with ECC error detection etc hence needed to explicitly trigger/handle such errors) - So move mem_service exception handler from common code into ARCv2 code. - In ARCompact code, define mem_service as L2 interrupt handler which just drops down to pure kernel mode and goes of to enqueue SIGBUS Reported-by: Nelson Pereira <npereira@synopsys.com> Tested-by: Ana Martins <amartins@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: remove extraneous header includeVineet Gupta1-1/+0
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-13Merge tag 'arm64-fixes' of ↵Linus Torvalds14-33/+54
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes and clean-ups from Catalin Marinas: "Here's a second pull request for this merging window with some fixes/clean-ups: - __cmpxchg_double*() return type fix to avoid truncation of a long to int and subsequent logical "not" in cmpxchg_double() misinterpreting the operation success/failure - BPF fixes for mod and div by zero - Fix compilation with STRICT_MM_TYPECHECKS enabled - VDSO build fix without libgcov - Some static and __maybe_unused annotations - Kconfig clean-up (FRAME_POINTER) - defconfig update for CRYPTO_CRC32_ARM64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: suspend: make hw_breakpoint_restore static arm64: mmu: make split_pud and fixup_executable static arm64: smp: make of_parse_and_init_cpus static arm64: use linux/types.h in kvm.h arm64: build vdso without libgcov arm64: mark cpus_have_hwcap as __maybe_unused arm64: remove redundant FRAME_POINTER kconfig option and force to select it arm64: fix R/O permissions of FDT mapping arm64: fix STRICT_MM_TYPECHECKS issue in PTE_CONT manipulation arm64: bpf: fix mod-by-zero case arm64: bpf: fix div-by-zero case arm64: Enable CRYPTO_CRC32_ARM64 in defconfig arm64: cmpxchg_dbl: fix return value type
2015-11-13Merge tag 'for-4.4' of git://git.osdn.jp/gitroot/uclinux-h8/linuxLinus Torvalds11-30/+29
Pull h8300 updates from Yoshinori Sato: "Some bug fixes" * tag 'for-4.4' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: enable CLKSRC_OF h8300: Don't set CROSS_COMPILE unconditionally asm-generic: {get,put}_user ptr argument evaluate only 1 time h8300: bit io fix h8300: zImage fix h8300: register address fix h8300: Fix alignment for .data h8300: unaligned divcr register support.
2015-11-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-220/+236
Pull second batch of kvm updates from Paolo Bonzini: "Four changes: - x86: work around two nasty cases where a benign exception occurs while another is being delivered. The endless stream of exceptions causes an infinite loop in the processor, which not even NMIs or SMIs can interrupt; in the virt case, there is no possibility to exit to the host either. - x86: support for Skylake per-guest TSC rate. Long supported by AMD, the patches mostly move things from there to common arch/x86/kvm/ code. - generic: remove local_irq_save/restore from the guest entry and exit paths when context tracking is enabled. The patches are a few months old, but we discussed them again at kernel summit. Andy will pick up from here and, in 4.5, try to remove it from the user entry/exit paths. - PPC: Two bug fixes, see merge commit 370289756becc for details" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: x86: rename update_db_bp_intercept to update_bp_intercept KVM: svm: unconditionally intercept #DB KVM: x86: work around infinite loop in microcode when #AC is delivered context_tracking: avoid irq_save/irq_restore on guest entry and exit context_tracking: remove duplicate enabled check KVM: VMX: Dump TSC multiplier in dump_vmcs() KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSC KVM: VMX: Setup TSC scaling ratio when a vcpu is loaded KVM: VMX: Enable and initialize VMX TSC scaling KVM: x86: Use the correct vcpu's TSC rate to compute time scale KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc() KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset() KVM: x86: Replace call-back compute_tsc_offset() with a common function KVM: x86: Replace call-back set_tsc_khz() with a common function KVM: x86: Add a common TSC scaling function KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_arch KVM: x86: Collect information for setting TSC scaling ratio KVM: x86: declare a few variables as __read_mostly KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_common KVM: PPC: Book3S HV: Don't dynamically split core when already split ...
2015-11-12arm64: suspend: make hw_breakpoint_restore staticJisheng Zhang1-1/+1
hw_breakpoint_restore is only used within suspend.c, so it can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: mmu: make split_pud and fixup_executable staticJisheng Zhang1-2/+2
split_pud and fixup_executable are only called from within mmu.c, so they can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: smp: make of_parse_and_init_cpus staticJisheng Zhang1-1/+1
of_parse_and_init_cpus is only called from within smp.c, so it can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: use linux/types.h in kvm.hArnd Bergmann1-1/+1
We should always use linux/types.h instead of asm/types.h for consistency, and Kbuild actually warns about it: ./usr/include/asm/kvm.h:35: include of <linux/types.h> is preferred over <asm/types.h> This patch does as Kbuild asks us. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: build vdso without libgcovArnd Bergmann1-0/+3
On a cross-toolchain without glibc support, libgcov may not be available, and attempting to build an arm64 kernel with GCOV enabled then results in a build error: /home/arnd/cross-gcc/lib/gcc/aarch64-linux/5.2.1/../../../../aarch64-linux/bin/ld: cannot find -lgcov We don't really want to link libgcov into the vdso anyway, so this patch just disables GCOV in the vdso directory, just as we do for most other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: mark cpus_have_hwcap as __maybe_unusedArnd Bergmann1-1/+1
cpus_have_hwcap() is defined as a 'static' function an only used in one place that is inside of an #ifdef, so we get a warning when the only user is disabled: arch/arm64/kernel/cpufeature.c:699:13: warning: 'cpus_have_hwcap' defined but not used [-Wunused-function] This marks the function as __maybe_unused, so the compiler knows that it can drop the function definition without warning about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 37b01d53ceef ("arm64/HWCAP: Use system wide safe values") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12s390/sclp: _sclp_wait_int(): retain full PSW maskSascha Silbe1-1/+1
There's no reason to clear all PSW mask bits other than the addressing mode bits. Just use the previous PSW mask as-is. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-12Merge branch '4.3-fixes' into mips-for-linux-nextRalf Baechle5-4/+26
2015-11-12MIPS: idle: add case for CPU_5KEAurelien Jarno1-0/+1
While the 5KE processors have never been taped out, they exists though a CP0.PRId and experimental RTLs or QEMU implementations. Add a case entry in the idle code, as they can use the standard idle loop like the 5K processors. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11099/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-12MIPS: Octeon: Support APPENDED_DTBAaro Koskinen1-2/+9
Use appended DTB when available. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11115/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-12MIPS: vmlinux: create a section for appended DTBAaro Koskinen3-0/+23
For bootloaders that support booting only ELF kernels and load only ELF segments to memory there is no easy way to supply DTB without kernel recompilation. For that purpose, create a section called .appended_dtb that can be later updated with board-specific DTB using binutils e.g. at kernel installation time. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11114/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-12MIPS: Clean up compat_siginfo_tAmanieu d'Antras1-28/+34
While mips can't use the generic compat_siginfo_t directly because its si_code and si_errno are inverted, we can still make it as close to the generic version as possible. This makes it easier to update when new members are added to siginfo_t. The main changes are adding a missing _sigsys union member and eliminating the unused _irix_sigchld one. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11455/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-12MIPS: Fix PAGE_MASK definitionDan Williams1-1/+1
Make PAGE_MASK an unsigned long, like it is on x86, to avoid: In file included from arch/mips/kernel/asm-offsets.c:14:0: include/linux/mm.h: In function '__pfn_to_pfn_t': include/linux/mm.h:1050:2: warning: left shift count >= width of type pfn_t pfn_t = { .val = pfn | (flags & PFN_FLAGS_MASK), }; ...where PFN_FLAGS_MASK is: #define PFN_FLAGS_MASK (~PAGE_MASK << (BITS_PER_LONG - PAGE_SHIFT)) Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: ross.zwisler@linux.intel.com Cc: hch@lst.de Cc: linux-mips@linux-mips.org Cc: linux-nvdimm@lists.01.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Patchwork: https://patchwork.linux-mips.org/patch/11280/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-12Merge branch 'kvm-ppc-fixes' of ↵Paolo Bonzini2-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD "Paolo, I have two fixes for HV KVM which I would like to have included in v4.4-rc1. The first one is a fix for a bug identified by Red Hat which causes occasional guest crashes. The second one fixes a bug which causes host stalls and timeouts under certain circumstances when the host is configured for static 2-way micro-threading mode."
2015-11-12perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macroHuang Rui1-6/+0
Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Li <tony.li@amd.com> Link: http://lkml.kernel.org/r/1446630233-3166-1-git-send-email-ray.huang@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-12h8300: enable CLKSRC_OFYoshinori Sato2-0/+3
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-11-11Merge tag 'pwm/for-4.4-rc1' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This round contains a couple of new drivers for the Marvell Berlin family of SoCs, various SoCs from Renesas and Broadcom as well as the backlight PWM present on MediaTek SoCs. Further existing drivers are extended to support a wider range of hardware. The remaining patches are minor fixes and cleanups across the board. Note that one of the patches included in this pull request is against arch/unicore32. I've included it here because I couldn't get a response from Guan Xuetao and I consider the change low-risk. Equivalent patches have been merged and tested in Samsung and PXA trees. The goal is to finally get rid of legacy code paths that have repeatedly been causing headaches" * tag 'pwm/for-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits) pwm: sunxi: Fix whitespace issue pwm: sysfs: Make use of the DEVICE_ATTR_[RW][WO] macro's pwm: sysfs: Remove unnecessary temporary variable unicore32: nb0916: Use PWM lookup table pwm: pwm-rcar: Revise the device tree binding document about compatible pwm: Return -ENODEV if no PWM lookup match is found pwm: sun4i: Add support for PWM controller on sun5i SoCs pwm: Set enable state properly on failed call to enable pwm: lpss: Add support for runtime PM pwm: lpss: Add more Intel Broxton IDs pwm: lpss: Support all four PWMs on Intel Broxton pwm: lpss: Add support for multiple PWMs pwm-pca9685: enable ACPI device found on Galileo Gen2 pwm: Add MediaTek display PWM driver support dt-bindings: pwm: Add MediaTek display PWM bindings pwm: tipwmss: Enable on TI DRA7x and AM437x pwm: atmel-hlcdc: add sama5d2 SoC support. pwm: Add Broadcom BCM7038 PWM controller support Documentation: dt: add Broadcom BCM7038 PWM controller binding pwm: Add support for R-Car PWM Timer ...
2015-11-11s390: add support for ipl devices in subchannel sets > 0Sebastian Ott3-12/+40
Allow to ipl from CCW based devices residing in any subchannel set. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11MIPS: BMIPS: Enable GZIP ramdisk and timed printksFlorian Fainelli2-2/+4
Update bmips_be_defconfig and bmips_stb_defconfig to have GZIP ramdisk support enabled by default as well was timed printks. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kevin Cernekee <cernekee@gmail.com> Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/11307/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11s390/ipl: fix out of bounds access in scpdata_writeSebastian Ott1-12/+5
The input buffer in reipl_fcp_scpdata_write is accessed out of bounds when an offset is specified. The problem is that the offset refers to the data we should write to and not to the buffer we read from. So instead of memcpy(scp_data, buf + off, count); we could just do memcpy(scp_data + off, buf, count); However we not only modify the data but also store its length. For this to work we'd need to remember a state per open FH. Since that's not possible with sysfs callbacks let's just fail when an offset is specified. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11MIPS: Add xilfpga defconfigZubair Lutfullah Kakakhel1-0/+40
Add defconfig for MIPSfpga Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: robh+dt@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: xilfpga: Add mipsfpga platform codeZubair Lutfullah Kakakhel9-0/+184
The xilfpga platform will be DT only. Add required platform code. DT files have already been added separately. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: robh+dt@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: xilfpga: Add xilfpga device tree files.Zubair Lutfullah Kakakhel4-0/+77
Add device tree files for the MIPSfpga platform. See Documentation/devicetree/bindings/mips/img/xilfpga.txt for details about MIPSfpga Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: robh+dt@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11362/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: Make MIPS_CMDLINE_DTB defaultJonas Gorski6-7/+3
Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied the arguments from dtb to arcs_command_line to prevent the kernel from overwriting them. Since there is now an option to keep the dtb arguments, default to the new option remove the "backup" to arcs_command_line in case of USE_OF is enabled, except for those platforms that still take the bootloader arguments or do not use any at all. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: Make the kernel arguments from dtb availableJonas Gorski2-7/+33
Similar to how arm allows using selecting between bootloader arguments, dtb arguments and both, allow to select them on mips. But since we have less control over the place of the dtb do not modify it but instead use the boot_command_line for merging them. The default is "use bootloader arguments" to keep the current behaviour as default. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11284/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: Use USE_OF as the guard for appended dtbJonas Gorski1-1/+1
Since OF is now a user selectable symbol, the choice for appended dtb support should only be visible when USE_OF is selected, as this indicates actual machine support for device tree in MIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11283/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: BCM63XX: Use pr_* instead of printkGregory Fong6-20/+20
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Joe Perches <joe@perches.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11300/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND.Huacai Chen3-7/+2
Now LOONGSON_CHIPCFG register definition doesn't depend on CPUFREQ any more, so CPU_SUPPORTS_CPUFREQ is no longer needed for suspend/resume. Remove CONFIG_LOONGSON_SUSPEND and use CONFIG_SUSPEND instead. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11274/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>