Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov
- Fix for older binutils which do not support C-syntax constant
suffixes
* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Do not use integer constant suffixes in inline asm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for link errors"
* tag 'mips-fixes_6.3_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Define RUNTIME_DISCARD_EXIT in LD script
|
|
Pull kvm fixes from Paolo Bonzini:
"Two serious ARM fixes:
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the user
register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be
lost"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
KVM: arm64: Make vcpu flag updates non-preemptible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #4
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the
user register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be lost.
|
|
MIPS's exit sections are discarded at runtime as well.
Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
|
|
The KVM_REG_SIZE() comes from the ioctl and it can be a power of two
between 0-32768 but if it is more than sizeof(long) this will corrupt
memory.
Fixes: 99adb567632b ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes, some build fixes, a comment fix and a trivial cleanup"
* tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG
LoongArch: Replace hard-coded values in comments with VALEN
LoongArch: Clean up plat_swiotlb_setup() related code
LoongArch: Check unwind_error() in arch_stack_walk()
LoongArch: Adjust user_regset_copyin parameter to the correct offset
LoongArch: Adjust user_watch_state for explicit alignment
LoongArch: module: set section addresses to 0x0
LoongArch: Mark 3 symbol exports as non-GPL
LoongArch: Enable PG when wakeup from suspend
LoongArch: Fix _CONST64_(x) as unsigned
LoongArch: Fix build error if CONFIG_SUSPEND is not set
LoongArch: Fix probing of the CRC32 feature
LoongArch: Make WriteCombine configurable for ioremap()
|
|
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are
concerned with the VA's MSB which is VALEN-1 instead of always being 47.
Fix comments to avoid misleading others.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following messages with CONFIG_PROVE_LOCKING=y on
LoongArch:
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
This is because stack_trace_save() returns a big value after call
arch_stack_walk(), here is the call trace:
save_trace()
stack_trace_save()
arch_stack_walk()
stack_trace_consume_entry()
arch_stack_walk() should return immediately if unwind_next_frame()
failed, no need to do the useless loops to increase the value of c->len
in stack_trace_consume_entry(), then we can fix the above problem.
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Ensure that user_watch_state can be set correctly by the user.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is done in order to easily calculate the number of breakpoints in
hw_break_get()/hw_break_set().
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Per-vcpu flags are updated using a non-atomic RMW operation.
Which means it is possible to get preempted between the read and
write operations.
Another interesting thing to note is that preemption also updates
flags, as we have some flag manipulation in both the load and put
operations.
It is thus possible to lose information communicated by either
load or put, as the preempted flag update will overwrite the flags
when the thread is resumed. This is specially critical if either
load or put has stored information which depends on the physical
CPU the vcpu runs on.
This results in really elusive bugs, and kudos must be given to
Mostafa for the long hours of debugging, and finally spotting
the problem.
Fix it by disabling preemption during the RMW operation, which
ensures that the state stays consistent. Also upgrade vcpu_get_flag
path to use READ_ONCE() to make sure the field is always atomically
accessed.
Fixes: e87abb73e594 ("KVM: arm64: Add helpers to manipulate vcpu flags among a set")
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230418125737.2327972-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit
driver, along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output"
* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
firmware/psci: demote suspend-mode warning to info level
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
tee: Pass a pointer to virt_to_page()
perf/amlogic: adjust register offsets
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
arm64: dts: meson-g12-common: specify full DMC range
arm64: dts: imx8mp: fix address length for LCDIF2
riscv: dts: canaan: drop invalid spi-max-frequency
...
|
|
These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit 5d8591bc0fbaeb6ded
("arm64 module: set plt* section addresses to 0x0").
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
vm_map_base, empty_zero_page and invalid_pmd_table could be accessed
widely by some out-of-tree non-GPL but important file systems or drivers
(e.g. OpenZFS). Let's use EXPORT_SYMBOL() instead of EXPORT_SYMBOL_GPL()
to export them, so as to avoid build errors.
1, Details about vm_map_base:
This is a LoongArch-specific symbol and may be referenced through macros
PCI_IOBASE, VMALLOC_START and VMALLOC_END.
2, Details about empty_zero_page:
As it stands today, only 3 architectures export empty_zero_page as a GPL
symbol: IA64, LoongArch and MIPS. LoongArch gets the GPL export by
inheriting from MIPS, and the MIPS export was first introduced in commit
497d2adcbf50b ("[MIPS] Export empty_zero_page for sake of the ext4
module."). The IA64 export was similar: commit a7d57ecf4216e ("[IA64]
Export three symbols for module use") did so for kvm.
In both IA64 and MIPS, the export of empty_zero_page was done for
satisfying some in-kernel component built as module (kvm and ext4
respectively), and given its reasonably low-level nature, GPL is a
reasonable choice. But looking at the bigger picture it is evident most
other architectures do not regard it as GPL, so in effect the symbol
probably should not be treated as such, in favor of consistency.
3, Details about invalid_pmd_table:
Keep consistency with invalid_pte_table and make it be possible by some
modules.
Cc: stable@vger.kernel.org
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some firmwares don't enable PG when wakeup from suspend, so do it in
kernel. This can improve code compatibility for boot kernel.
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Addresses should all be of unsigned type to avoid unnecessary conversions.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:
ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'
Here is the call trace:
acpi_pm_prepare()
__acpi_pm_prepare()
acpi_sleep_prepare()
acpi_get_wakeup_address()
loongarch_wakeup_start()
Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.
Fixes: 366bb35a8e48 ("LoongArch: Add suspend (ACPI S3) support")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/11215033-fa3c-ecb1-2fc0-e9aeba47be9b@infradead.org/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Not all LoongArch processors support CRC32 instructions. This feature
is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the
previous versions of the ISA manual (and so does in loongarch.h). The
CRC32 feature is set unconditionally now, so fix it.
BTW, expose the CRC32 feature in /proc/cpuinfo.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The usage of the BIT() macro in inline asm code was introduced in 6.3 by
the commit in the Fixes tag. However, this macro uses "1UL" for integer
constant suffixes in its shift operation, while gas before 2.28 does not
support the "L" suffix after a number, and gas before 2.27 does not
support the "U" suffix, resulting in build errors such as the following
with such versions:
./arch/x86/include/asm/uaccess_64.h:124: Error: found 'L', expected: ')'
./arch/x86/include/asm/uaccess_64.h:124: Error: junk at end of line,
first unrecognized character is `L'
However, the currently minimal binutils version the kernel supports is
2.25.
There's a single use of this macro here, revert to (1 << 0) that works
with such older binutils.
As an additional info, the binutils PRs which add support for those
suffixes are:
https://sourceware.org/bugzilla/show_bug.cgi?id=19910
https://sourceware.org/bugzilla/show_bug.cgi?id=20732
[ bp: Massage and extend commit message. ]
Fixes: 5d1dd961e743 ("x86/alternatives: Add alt_instr.flags")
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/lkml/a9aae568-3046-306c-bd71-92c1fc8eeddc@linux.alibaba.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Drop __init annotation from two rtc functions which get called after
boot is done, in order to prevent a crash
* tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Remove __init for runtime functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- A fix for NUMA distance handling in the pseries SCM (pmem) driver.
Thanks to Aneesh Kumar K.V.
* tag 'powerpc-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Update the NUMA distance table for the target node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Drop debug info from purgatory objects again
- Document that kernel.org provides prebuilt LLVM toolchains
- Give up handling untracked files for source package builds
- Avoid creating corrupted cpio when KBUILD_BUILD_TIMESTAMP is given
with a pre-epoch data.
- Change panic_show_mem() to a macro to handle variable-length argument
- Compress tarballs on-the-fly again
* tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: do not create intermediate *.tar for tar packages
kbuild: do not create intermediate *.tar for source tarballs
kbuild: merge cmd_archive_linux and cmd_archive_perf
init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
initramfs: Check negative timestamp to prevent broken cpio archive
kbuild: give up untracked files for source package builds
Documentation/llvm: Add a note about prebuilt kernel.org toolchains
purgatory: fix disabling debug info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a missing fence when generating the NOMMU sigreturn
trampoline
- A set of fixes for early DTB handling of reserved memory nodes
* tag 'riscv-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: No need to relocate the dtb as it lies in the fixmap region
riscv: Do not set initial_boot_params to the linear address of the dtb
riscv: Move early dtb mapping into the fixmap region
riscv: add icache flush for nommu sigreturn trampoline
|
|
Thomas Richter reported a crash in linux-next with a backtrace similar
to the following one:
[<0000000000000000>] 0x0
([<000000000031a182>] bpf_trace_run4+0xc2/0x218)
[<00000000001d59f4>] __bpf_trace_sched_switch+0x1c/0x28
[<0000000000c44a3a>] __schedule+0x43a/0x890
[<0000000000c44ef8>] schedule+0x68/0x110
[<0000000000c4e5ca>] do_nanosleep+0xa2/0x168
[<000000000026e7fe>] hrtimer_nanosleep+0xf6/0x1c0
[<000000000026eb6e>] __s390x_sys_nanosleep+0xb6/0xf0
[<0000000000c3b81c>] __do_syscall+0x1e4/0x208
[<0000000000c50510>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003ff7fda1814>] bpf_prog_65e887c70a835bbf_on_switch+0x1a4/0x1f0
The problem is that bpf_arch_text_poke() with new_addr == NULL is
susceptible to the following race condition:
T1 T2
----------------- -------------------
plt.target = NULL
entry: brcl 0xf,plt
entry.mask = 0
lgrl %r1,plt.target
br %r1
Fix by setting PLT target to the instruction following `brcl 0xf,plt`
instead of 0. This way T2 will simply resume the execution of the eBPF
program, which is the desired effect of passing new_addr == NULL.
Fixes: f1d5df84cd8c ("s390/bpf: Implement bpf_arch_text_poke()")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20230414154755.184502-1-iii@linux.ibm.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We used to access the dtb via its linear mapping address but now that the
dtb early mapping was moved in the fixmap region, we can keep using this
address since it is present in swapper_pg_dir, and remove the dtb
relocation.
Note that the relocation was wrong anyway since early_memremap() is
restricted to 256K whereas the maximum fdt size is 2MB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-4-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
early_init_dt_verify() is already called in parse_dtb() and since the dtb
address does not change anymore (it is now in the fixmap region), no need
to reset initial_boot_params by calling early_init_dt_verify() again.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329081932.79831-3-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
riscv establishes 2 virtual mappings:
- early_pg_dir maps the kernel which allows to discover the system
memory
- swapper_pg_dir installs the final mapping (linear mapping included)
We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.
The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.
So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.
Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96dc ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed92 ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
|
|
set_rtc_noop(), get_rtc_noop() are after booting, therefore their __init
annotation is wrong.
A crash was observed on an x86 platform where CMOS RTC is unused and
disabled via device tree. set_rtc_noop() was invoked from ntp:
sync_hw_clock(), although CONFIG_RTC_SYSTOHC=n, however sync_cmos_clock()
doesn't honour that.
Workqueue: events_power_efficient sync_hw_clock
RIP: 0010:set_rtc_noop
Call Trace:
update_persistent_clock64
sync_hw_clock
Fix this by dropping the __init annotation from set/get_rtc_noop().
Fixes: c311ed6183f4 ("x86/init: Allow DT configured systems to disable RTC at boot time")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/59f7ceb1-446b-1d3d-0bc8-1f0ee94b1e18@nokia.com
|
|
In a NOMMU kernel, sigreturn trampolines are generated on the user
stack by setup_rt_frame. Currently, these trampolines are not instruction
fenced, thus their visibility to ifetch is not guaranteed.
This patch adds a flush_icache_range in setup_rt_frame to fix this
problem.
Signed-off-by: Mathis Salmen <mathis.salmen@matsal.de>
Fixes: 6bd33e1ece52 ("riscv: add nommu support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230406101130.82304-1-mathis.salmen@matsal.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Provide pci_msix_can_alloc_dyn() stub when CONFIG_PCI_MSI unset to
avoid build errors (Reinette Chatre)
- Quirk AMD XHCI controller that loses MSI-X state in D3hot to avoid
broken USB after hotplug or suspend/resume (Basavaraj Natikar)
- Fix use-after-free in pci_bus_release_domain_nr() (Rob Herring)
* tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hot
PCI/MSI: Provide missing stub for pci_msix_can_alloc_dyn()
|
|
Pull kvm fixes from Paolo Bonzini:
"Two ARM fixes:
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs
KVM: arm64: PMU: Restore the guest's EL0 event counting after migration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fix from Richard Weinberger:
- Build regression fix for older gcc versions
* tag 'uml-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Only disable SSE on clang to work around old GCC bugs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel Arrow Lake CPU model number
- Fix a confusion about how to check the version of the ACPI spec which
supports a "online capable" bit in the MADT table which lead to a
bunch of boot breakages with Zen1 systems and VMs
* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add model number for Intel Arrow Lake processor
x86/acpi/boot: Correct acpi_is_processor_usable() check
x86/ACPI/boot: Use FADT version to check support for online capable
|
|
Since 32ef9e5054ec, -Wa,-gdwarf-2 is no longer used in KBUILD_AFLAGS.
Instead, it includes -g, the appropriate -gdwarf-* flag, and also the
-Wa versions of both of those if building with Clang and GNU as. As a
result, debug info was being generated for the purgatory objects, even
though the intention was that it not be.
Fixes: 32ef9e5054ec ("Makefile.debug: re-enable debug info for .S files")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Cc: stable@vger.kernel.org
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-04-08
We've added 4 non-merge commits during the last 11 day(s) which contain
a total of 5 files changed, 39 insertions(+), 6 deletions(-).
The main changes are:
1) Fix BPF TCP socket iterator to use correct helper for dropping
socket's refcount, that is, sock_gen_put instead of sock_put,
from Martin KaFai Lau.
2) Fix a BTI exception splat in BPF trampoline-generated code on arm64,
from Xu Kuohai.
3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo.
4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver
bpf, arm64: Fixed a BTI error on returning to patched function
LoongArch, bpf: Fix jit to skip speculation barrier opcode
bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
====================
Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix uninitialised variable warning (from smatch) in the arm64 compat
alignment fixup code"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Work around uninitialized variable warning
|
|
There are some interop issues seen across a few DP monitors with
HBR3 and herobrine boards where the DP display stays blank with hbr3.
This is still under investigation but in preparation for supporting
higher resolutions, its better to disable HBR3 till the issues are
root-caused as there is really no guarantee which monitors will show
the issue and which would not.
This can be enabled back after successful validation across more DP
sinks.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230329233416.27152-1-quic_abhinavk@quicinc.com
|
|
The AMD [1022:15b8] USB controller loses some internal functional MSI-X
context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot
and D3hot->D0 transitions so it can save and restore that internal context,
but some firmware in the field can't do this because it fails to clear the
AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit.
Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller
initialization during boot.
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Link: https://lore.kernel.org/r/20230329172859.699743-1-Basavaraj.Natikar@amd.com
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.3-final
A solitary fix here from Krzysztof for an invalid property that
should've probably been removed months ago, but was missed due to it
being in a dtb that doesn't build w/ defconfig.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.3-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: canaan: drop invalid spi-max-frequency
Link: https://lore.kernel.org/r/20230406-negate-octagon-0fc2e47dbde5@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #3
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.3, 2nd round:
- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
i.MX8 Verdin boards.
* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: imx8mp: fix address length for LCDIF2
Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.
This is based on the same fix done in commit 0cd5780eb625 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|