Age | Commit message (Collapse) | Author | Files | Lines |
|
On VMX, if we exit and then re-enter immediately without leaving
the vmx_vcpu_run() function, the kvm_entry event is not logged.
That means we will see one (or more) kvm_exit, without its (their)
corresponding kvm_entry, as shown here:
CPU-1979 [002] 89.871187: kvm_entry: vcpu 1
CPU-1979 [002] 89.871218: kvm_exit: reason MSR_WRITE
CPU-1979 [002] 89.871259: kvm_exit: reason MSR_WRITE
It also seems possible for a kvm_entry event to be logged, but then
we leave vmx_vcpu_run() right away (if vmx->emulation_required is
true). In this case, we will have a spurious kvm_entry event in the
trace.
Fix these situations by moving trace_kvm_entry() inside vmx_vcpu_run()
(where trace_kvm_exit() already is).
A trace obtained with this patch applied looks like this:
CPU-14295 [000] 8388.395387: kvm_entry: vcpu 0
CPU-14295 [000] 8388.395392: kvm_exit: reason MSR_WRITE
CPU-14295 [000] 8388.395393: kvm_entry: vcpu 0
CPU-14295 [000] 8388.395503: kvm_exit: reason EXTERNAL_INTERRUPT
Of course, not calling trace_kvm_entry() in common x86 code any
longer means that we need to adjust the SVM side of things too.
Signed-off-by: Lorenzo Brescia <lorenzo.brescia@edu.unito.it>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <160873470698.11652.13483635328769030605.stgit@Wayrath>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The injection process of smi has two steps:
Qemu KVM
Step1:
cpu->interrupt_request &= \
~CPU_INTERRUPT_SMI;
kvm_vcpu_ioctl(cpu, KVM_SMI)
call kvm_vcpu_ioctl_smi() and
kvm_make_request(KVM_REQ_SMI, vcpu);
Step2:
kvm_vcpu_ioctl(cpu, KVM_RUN, 0)
call process_smi() if
kvm_check_request(KVM_REQ_SMI, vcpu) is
true, mark vcpu->arch.smi_pending = true;
The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as
0x0300 in the intel_perfmon_event_map[]. Correct its usage.
Fixes: 62079d8a4312 ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:
shift exponent 197 is too large for 64-bit type 'long long unsigned int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348
kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177
kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308
kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709
kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210118025800.34620-1-like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add compile-time asserts in rsvd_bits() to guard against KVM passing in
garbage hardcoded values, and cap the upper bound at '63' for dynamic
values to prevent generating a mask that would overflow a u64.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113204515.3473079-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #2
- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
|
|
NanoPi R2S is headless, so rightly does not enable any of the display
interface hardware, which currently provokes an obnoxious error in the
boot log from the fake DRM device failing to find anything to bind to.
It probably isn't *too* hard to obviate the fake device shenanigans
entirely with a bit of driver reshuffling, but for now let's just
disable it here to shut up the spurious error.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c4553dfad1ad6792c4f22454c135ff55de77e2d6.1611186099.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
arm_smccc_1_1_hvc() only adds write contraints for x0-3 in the inline
assembly for the HVC instruction so make sure those are the only
registers that change when __do_hyp_init is called.
Tested-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210125145415.122439-3-ascull@google.com
|
|
We may lose edge interrupts for gpio banks other than the first gpio
bank as they are not always powered. Instead, we must use the padconf
interrupt as that is always powered.
Note that we still also use the gpio for reading the pin state as that
can't be done with the padconf device.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Pull arch/sh updates from Rich Felker:
"Cleanup and warning fixes"
* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
sh/intc: Restore devm_ioremap() alignment
sh: mach-sh03: remove duplicate include
arch: sh: remove duplicate include
sh: Drop ARCH_NR_GPIOS definition
sh: Remove unused HAVE_COPY_THREAD_TLS macro
sh: remove CONFIG_IDE from most defconfig
sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
arch/sh: hyphenate Non-Uniform in Kconfig prompt
sh: dma: fix kconfig dependency for G2_DMA
|
|
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
|
|
The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU. This got lost with the conversion
to the generic implementation.
Override the default map function.
Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().
Use set_pte() like the original MIPS highmem implementation did.
Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83bca1 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".
The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.
This patch (of 4):
The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.
Sparc requires cache flush before map/unmap and tlb flush afterwards.
Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa97807 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bad interaction between the scv handling and the fallback L1D
flush, which could lead to user register corruption. Only affects
people using scv (~no one) on machines with old firmware that are
missing the L1D flush.
- Two small selftest fixes.
Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.
* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: fix scv entry fallback flush vs interrupt
selftests/powerpc: Only test lwm/stmw on big endian
selftests/powerpc: Fix exit status of pkey tests
|
|
Patch series "mm: fix initialization of struct page for holes in memory layout", v3.
Commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions
rather that check each PFN") exposed several issues with the memory map
initialization and these patches fix those issues.
Initially there were crashes during compaction that Qian Cai reported
back in April [1]. It seemed back then that the problem was fixed, but
a few weeks ago Andrea Arcangeli hit the same bug [2] and there was an
additional discussion at [3].
[1] https://lore.kernel.org/lkml/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw
[2] https://lore.kernel.org/lkml/20201121194506.13464-1-aarcange@redhat.com
[3] https://lore.kernel.org/mm-commits/20201206005401.qKuAVgOXr%akpm@linux-foundation.org
This patch (of 2):
The first 4Kb of memory is a BIOS owned area and to avoid its allocation
for the kernel it was not listed in e820 tables as memory. As the result,
pfn 0 was never recognised by the generic memory management and it is not
a part of neither node 0 nor ZONE_DMA.
If set_pfnblock_flags_mask() would be ever called for the pageblock
corresponding to the first 2Mbytes of memory, having pfn 0 outside of
ZONE_DMA would trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
Along with reserving the first 4Kb in e820 tables, several first pages are
reserved with memblock in several places during setup_arch(). These
reservations are enough to ensure the kernel does not touch the BIOS area
and it is not necessary to remove E820_TYPE_RAM for pfn 0.
Remove the update of e820 table that changes the type of pfn 0 and move
the comment describing why it was done to trim_low_memory_range() that
reserves the beginning of the memory.
Link: https://lkml.kernel.org/r/20210111194017.22696-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
interrupt
When an asynchronous interrupt calls irq_exit, it checks for softirqs
that may have been created, and runs them. Running softirqs enables
local irqs, which can replay pending interrupts causing recursion in
replay_soft_interrupts. This abridged trace shows how this can occur:
! NIP replay_soft_interrupts
LR interrupt_exit_kernel_prepare
Call Trace:
interrupt_exit_kernel_prepare (unreliable)
interrupt_return
--- interrupt: ea0 at __rb_reserve_next
NIP __rb_reserve_next
LR __rb_reserve_next
Call Trace:
ring_buffer_lock_reserve
trace_function
function_trace_call
ftrace_call
__do_softirq
irq_exit
timer_interrupt
! replay_soft_interrupts
interrupt_exit_kernel_prepare
interrupt_return
--- interrupt: ea0 at arch_local_irq_restore
This can not be prevented easily, because softirqs must not block hard
irqs, so it has to be dealt with.
The recursion is bounded by design in the softirq code because softirq
replay disables softirqs and loops around again to check for new
softirqs created while it ran, so that's not a problem.
However it does mess up interrupt replay state, causing superfluous
interrupts when the second replay_soft_interrupts clears a pending
interrupt, leaving it still set in the first call in the 'happened'
local variable.
Fix this by not caching a copy of irqs_happened across interrupt
handler calls.
Fixes: 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210123061244.2076145-1-npiggin@gmail.com
|
|
The max_mapnr is the number of PFNs, not absolute PFN offset.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Fixes: d0d8aae64566 ("RISC-V: Set maximum number of mapped pages correctly")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.11, round 2:
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
* tag 'imx-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
Link: https://lore.kernel.org/r/20210119091949.GD4356@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a non-empty dma-ranges so that DMA address translation happens.
Fixes: 2013a4b684b6 ("arm64: dts: broadcom: clear the warnings caused by empty dma-ranges")
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Correctly mask out bits 63:60 in a kernel tag check fault address
(specified as unknown by the architecture). Previously they were just
zeroed but for kernel pointers they need to be all ones.
- Fix a panic (unexpected kernel BRK exception) caused by kprobes being
reentered due to an interrupt.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kprobes: Fix Uexpected kernel BRK exception at EL1
kasan, arm64: fix pointer tags in KASAN reports
|
|
I was hitting the below panic continuously when attaching kprobes to
scheduler functions
[ 159.045212] Unexpected kernel BRK exception at EL1
[ 159.053753] Internal error: BRK handler: f2000006 [#1] PREEMPT SMP
[ 159.059954] Modules linked in:
[ 159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.11.0-rc4-00008-g1e2a199f6ccd #56
[rt-app] <notice> [1] Exiting.[ 159.071166] Hardware name: ARM Juno development board (r2) (DT)
[ 159.079689] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--)
[ 159.085723] pc : 0xffff80001624501c
[ 159.089377] lr : attach_entity_load_avg+0x2ac/0x350
[ 159.094271] sp : ffff80001622b640
[rt-app] <notice> [0] Exiting.[ 159.097591] x29: ffff80001622b640 x28: 0000000000000001
[ 159.105515] x27: 0000000000000049 x26: ffff000800b79980
[ 159.110847] x25: ffff00097ef37840 x24: 0000000000000000
[ 159.116331] x23: 00000024eacec1ec x22: ffff00097ef12b90
[ 159.121663] x21: ffff00097ef37700 x20: ffff800010119170
[rt-app] <notice> [11] Exiting.[ 159.126995] x19: ffff00097ef37840 x18: 000000000000000e
[ 159.135003] x17: 0000000000000001 x16: 0000000000000019
[ 159.140335] x15: 0000000000000000 x14: 0000000000000000
[ 159.145666] x13: 0000000000000002 x12: 0000000000000002
[ 159.150996] x11: ffff80001592f9f0 x10: 0000000000000060
[ 159.156327] x9 : ffff8000100f6f9c x8 : be618290de0999a1
[ 159.161659] x7 : ffff80096a4b1000 x6 : 0000000000000000
[ 159.166990] x5 : ffff00097ef37840 x4 : 0000000000000000
[ 159.172321] x3 : ffff000800328948 x2 : 0000000000000000
[ 159.177652] x1 : 0000002507d52fec x0 : ffff00097ef12b90
[ 159.182983] Call trace:
[ 159.185433] 0xffff80001624501c
[ 159.188581] update_load_avg+0x2d0/0x778
[ 159.192516] enqueue_task_fair+0x134/0xe20
[ 159.196625] enqueue_task+0x4c/0x2c8
[ 159.200211] ttwu_do_activate+0x70/0x138
[ 159.204147] sched_ttwu_pending+0xbc/0x160
[ 159.208253] flush_smp_call_function_queue+0x16c/0x320
[ 159.213408] generic_smp_call_function_single_interrupt+0x1c/0x28
[ 159.219521] ipi_handler+0x1e8/0x3c8
[ 159.223106] handle_percpu_devid_irq+0xd8/0x460
[ 159.227650] generic_handle_irq+0x38/0x50
[ 159.231672] __handle_domain_irq+0x6c/0xc8
[ 159.235781] gic_handle_irq+0xcc/0xf0
[ 159.239452] el1_irq+0xb4/0x180
[ 159.242600] rcu_is_watching+0x28/0x70
[ 159.246359] rcu_read_lock_held_common+0x44/0x88
[ 159.250991] rcu_read_lock_any_held+0x30/0xc0
[ 159.255360] kretprobe_dispatcher+0xc4/0xf0
[ 159.259555] __kretprobe_trampoline_handler+0xc0/0x150
[ 159.264710] trampoline_probe_handler+0x38/0x58
[ 159.269255] kretprobe_trampoline+0x70/0xc4
[ 159.273450] run_rebalance_domains+0x54/0x80
[ 159.277734] __do_softirq+0x164/0x684
[ 159.281406] irq_exit+0x198/0x1b8
[ 159.284731] __handle_domain_irq+0x70/0xc8
[ 159.288840] gic_handle_irq+0xb0/0xf0
[ 159.292510] el1_irq+0xb4/0x180
[ 159.295658] arch_cpu_idle+0x18/0x28
[ 159.299245] default_idle_call+0x9c/0x3e8
[ 159.303265] do_idle+0x25c/0x2a8
[ 159.306502] cpu_startup_entry+0x2c/0x78
[ 159.310436] secondary_start_kernel+0x160/0x198
[ 159.314984] Code: d42000c0 aa1e03e9 d42000c0 aa1e03e9 (d42000c0)
After a bit of head scratching and debugging it turned out that it is
due to kprobe handler being interrupted by a tick that causes us to go
into (I think another) kprobe handler.
The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR
which leads to the Unexpected kernel BRK exception.
Reverting commit ba090f9cafd5 ("arm64: kprobes: Remove redundant
kprobe_step_ctx") seemed to fix the problem for me.
Further analysis showed that kcb->kprobe_status is set to
KPROBE_REENTER when the error occurs. By teaching
kprobe_breakpoint_ss_handler() to handle this status I can no longer
reproduce the problem.
Fixes: ba090f9cafd5 ("arm64: kprobes: Remove redundant kprobe_step_ctx")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210122110909.3324607-1-qais.yousef@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The "modem-remoteproc" property is no longer required for the IPA
driver, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "modem-remoteproc" property is no longer required for the IPA
driver, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull OpenRISC fixes from Stafford Horne:
- Compiler warning fixup for new Litex SoC driver
- Sparse warning fixup for iounmap
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: io: Add missing __iomem annotation to iounmap()
soc: litex: Fix compile warning when device tree is not configured
|
|
Add Alder Lake mobile CPU model number to Intel family.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210121215004.11618-1-tony.luck@intel.com
|
|
The default kernel_fpu_begin() doesn't work on systems that support XMM but
haven't yet enabled CR4.OSFXSR. This causes crashes when _mmx_memcpy() is
called too early because LDMXCSR generates #UD when the aforementioned bit
is clear.
Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly.
Fixes: 7ad816762f9b ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()")
Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
|
|
Currently, requesting kernel FPU access doesn't distinguish which parts of
the extended ("FPU") state are needed. This is nice for simplicity, but
there are a few cases in which it's suboptimal:
- The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do
not use legacy 387 state. These users want MXCSR initialized but don't
care about the FPU control word. Skipping FNINIT would save time.
(Empirically, FNINIT is several times slower than LDMXCSR.)
- Code that wants MMX doesn't want or need MXCSR initialized.
_mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and
initializing MXCSR will fail because LDMXCSR generates an #UD when the
aforementioned CR4 bit is not set.
- Any future in-kernel users of XFD (eXtended Feature Disable)-capable
dynamic states will need special handling.
Add a more specific API that allows callers to specify exactly what they
want.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
|
|
When running on v8.0 HW, make sure we don't try to advertise
events in the 0x4000-0x403f range.
Cc: stable@vger.kernel.org
Fixes: 88865beca9062 ("KVM: arm64: Mask out filtered events in PCMEID{0,1}_EL1")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210121105636.1478491-1-maz@kernel.org
|
|
KASAN in HW_TAGS mode will store MTE tags in the top byte of the
pointer. When computing the offset for TPIDR_EL2 we don't want anything
in the top byte, so remove the tag to ensure the computation is correct
no matter what the tag.
Fixes: 94ab5b61ee16 ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: added comment]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210108161254.53674-1-steven.price@arm.com
|
|
The x64 bpf jit expects bpf images converge within the given passes, but
it could fail to do so with some corner cases. For example:
l0: ja 40
l1: ja 40
[... repeated ja 40 ]
l39: ja 40
l40: ret #0
This bpf program contains 40 "ja 40" instructions which are effectively
NOPs and designed to be replaced with valid code dynamically. Ideally,
bpf jit should optimize those "ja 40" instructions out when translating
the bpf instructions into x64 machine code. However, do_jit() can only
remove one "ja 40" for offset==0 on each pass, so it requires at least
40 runs to eliminate those JMPs and exceeds the current limit of
passes(20). In the end, the program got rejected when BPF_JIT_ALWAYS_ON
is set even though it's legit as a classic socket filter.
To make bpf images more likely converge within 20 passes, this commit
pads some instructions with NOPs in the last 5 passes:
1. conditional jumps
A possible size variance comes from the adoption of imm8 JMP. If the
offset is imm8, we calculate the size difference of this BPF instruction
between the previous and the current pass and fill the gap with NOPs.
To avoid the recalculation of jump offset, those NOPs are inserted before
the JMP code, so we have to subtract the 2 bytes of imm8 JMP when
calculating the NOP number.
2. BPF_JA
There are two conditions for BPF_JA.
a.) nop jumps
If this instruction is not optimized out in the previous pass,
instead of removing it, we insert the equivalent size of NOPs.
b.) label jumps
Similar to condition jumps, we prepend NOPs right before the JMP
code.
To make the code concise, emit_nops() is modified to use the signed len and
return the number of inserted NOPs.
For bpf-to-bpf, we always enable padding for the extra pass since there
is only one extra run and the jump padding doesn't affected the images
that converge without padding.
After applying this patch, the corner case was loaded with the following
jit code:
flen=45 proglen=77 pass=17 image=ffffffffc03367d4 from=jump pid=10097
JIT code: 00000000: 0f 1f 44 00 00 55 48 89 e5 53 41 55 31 c0 45 31
JIT code: 00000010: ed 48 89 fb eb 30 eb 2e eb 2c eb 2a eb 28 eb 26
JIT code: 00000020: eb 24 eb 22 eb 20 eb 1e eb 1c eb 1a eb 18 eb 16
JIT code: 00000030: eb 14 eb 12 eb 10 eb 0e eb 0c eb 0a eb 08 eb 06
JIT code: 00000040: eb 04 eb 02 66 90 31 c0 41 5d 5b c9 c3
0: 0f 1f 44 00 00 nop DWORD PTR [rax+rax*1+0x0]
5: 55 push rbp
6: 48 89 e5 mov rbp,rsp
9: 53 push rbx
a: 41 55 push r13
c: 31 c0 xor eax,eax
e: 45 31 ed xor r13d,r13d
11: 48 89 fb mov rbx,rdi
14: eb 30 jmp 0x46
16: eb 2e jmp 0x46
...
3e: eb 06 jmp 0x46
40: eb 04 jmp 0x46
42: eb 02 jmp 0x46
44: 66 90 xchg ax,ax
46: 31 c0 xor eax,eax
48: 41 5d pop r13
4a: 5b pop rbx
4b: c9 leave
4c: c3 ret
At the 16th pass, 15 jumps were already optimized out, and one jump was
replaced with NOPs at 44 and the image converged at the 17th pass.
v4:
- Add the detailed comments about the possible padding bytes
v3:
- Copy the instructions of prologue separately or the size calculation
of the first BPF instruction would include the prologue.
- Replace WARN_ONCE() with pr_err() and EFAULT
- Use MAX_PASSES in the for loop condition check
- Remove the "padded" flag from x64_jit_data. For the extra pass of
subprogs, padding is always enabled since it won't hurt the images
that converge without padding.
v2:
- Simplify the sample code in the description and provide the jit code
- Check the expected padding bytes with WARN_ONCE
- Move the 'padded' flag to 'struct x64_jit_data'
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210119102501.511-2-glin@suse.com
|
|
Conflicts:
drivers/net/can/dev.c
commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug")
commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir")
Code move.
drivers/net/dsa/b53/b53_common.c
commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"")
commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Field rename.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for build failure showing up in some configurations"
* tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix 'nopvspin' build error
|
|
The L1D flush fallback functions are not recoverable vs interrupts,
yet the scv entry flush runs with MSR[EE]=1. This can result in a
timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting
the EXRFI save area, which ends up corrupting userspace registers for
scv return.
Fix this by disabling RI and EE for the scv entry fallback flush.
Fixes: f79643787e0a0 ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport
Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
|
|
With C=1:
drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void *addr @@ got void [noderef] __iomem *[assigned] base @@
drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: expected void *addr
drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: got void [noderef] __iomem *[assigned] base
Fix this by adding the missing __iomem annotation to iounmap().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Dexuan to fix clockevent initialization"
* tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Initialize clockevents after LAPIC is initialized
|
|
On x86 scale invariace tends to be disabled during resume from
suspend-to-RAM, because the MPERF or APERF MSR values are not as
expected then due to updates taking place after the platform
firmware has been invoked to complete the suspend transition.
That, of course, is not desirable, especially if the schedutil
scaling governor is in use, because the lack of scale invariance
causes it to be less reliable.
To counter that effect, modify init_freq_invariance() to register
a syscore_ops object for scale invariance with the ->resume callback
pointing to init_counter_refs() which will run on the CPU starting
the resume transition (the other CPUs will be taken care of the
"online" operations taking place later).
Fixes: e2b0d619b400 ("x86, sched: check for counters overflow in frequency invariant accounting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lkml.kernel.org/r/1803209.Mvru99baaF@kreacher
|
|
That logic is unused since
320100a5ffe5 ("x86/entry: Remove the TRACE_IRQS cruft")
Remove it.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YAAszZJ2GcIYZmB5@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull ia64 build fix from Mike Rapoport:
"Fix an ia64 build failure caused by memory model changes"
* tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ia64: fix build failure caused by memory model changes
|
|
As of the "arm64: expose FAR_EL1 tag bits in siginfo" patch, the address
that is passed to report_tag_fault has pointer tags in the format of 0x0X,
while KASAN uses 0xFX format (note the difference in the top 4 bits).
Fix up the pointer tag for kernel pointers in do_tag_check_fault by
setting them to the same value as bit 55. Explicitly use __untagged_addr()
instead of untagged_addr(), as the latter doesn't affect TTBR1 addresses.
Fixes: dceec3ff7807 ("arm64: expose FAR_EL1 tag bits in siginfo")
Fixes: 4291e9ee6189 ("kasan, arm64: print report from tag fault handler")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://linux-review.googlesource.com/id/I9ced973866036d8679e8f4ae325de547eb969649
Link: https://lore.kernel.org/r/ff30b0afe6005fd046f9ac72bfb71822aedccd89.1610731872.git.andreyknvl@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: video-codec@ff660000:
'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
The rkvdec driver gets it irq with help of the platform_get_irq()
function, so remove the interrupt-names property from the rk3399
vdec node.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
media/rockchip,vdec.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117181653.24886-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
On i.MX8MP, The GPIO3's secondary gpio-ranges's 'gpio controller offset'
cell value should be 26, so correct it.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Fixes: 6d9b8d20431f ("arm64: dts: freescale: Add i.MX8MP dtsi support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The PHY address bit 2 is configured by the LED pin. Attaching a LED
to this pin is not sufficient to guarantee this configuration pin is
correctly read. This leads to some platforms having their PHY at
address 0 and others at address 4.
If there is no phy-handle specified, the FEC driver will scan the PHY
bus for a PHY and use that. Consequently, adding the DT configuration
of the PHY and the phy properties to the FEC driver broke some boards.
Fix this by removing the phy-handle property, and listing two PHY
entries for both possible PHY addresses, so that the DT configuration
for the PHY can be found by the PHY driver.
Fixes: 86b08bd5b994 ("ARM: dts: imx6-sr-som: add ethernet PHY configuration")
Reported-by: Christoph Mattheis <christoph.mattheis@arcor.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
When the kernel is configured to use the Thumb-2 instruction set
"suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL
(i.MX 6ULL) and Apalis iMX6 (i.MX 6Q).
It looks like the CPU resumes unconditionally in ARM instruction mode
and then chokes on the presented Thumb-2 code it should execute.
Fix this by using the arm instruction set for all code in
suspend-imx6.S.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Fixes: df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q")
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
RTC pcf2127 device driver has changed default behaviour of the watchdog
feature in v5.11-rc1. Now you need to explicitly enable it with a
device tree property, "reset-source", when used in the board design.
Fixes: 71ac13457d9d ("rtc: pcf2127: only use watchdog when explicitly available")
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: Bruno Thomsen <bth@kamstrup.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled.
Fixes this build error:
../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’:
../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function)
nopvspin = true;
Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a lack of alignment in our linker script, that can lead to
crashes depending on configuration etc.
One fix for the 32-bit VDSO after the C VDSO conversion.
Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy"
* tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Fix clock_gettime_fallback for vdso32
powerpc: Fix alignment bug within the init sections
|
|
With commit 4df4cb9e99f8, the Hyper-V direct-mode STIMER is actually
initialized before LAPIC is initialized: see
apic_intr_mode_init()
x86_platform.apic_post_init()
hyperv_init()
hv_stimer_alloc()
apic_bsp_setup()
setup_local_APIC()
setup_local_APIC() temporarily disables LAPIC, initializes it and
re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's
registered, it can be programmed immediately and the timer can fire
very soon:
hv_stimer_init
clockevents_config_and_register
clockevents_register_device
tick_check_new_device
tick_setup_device
tick_setup_periodic(), tick_setup_oneshot()
clockevents_program_event
When the timer fires in the hypervisor, if the LAPIC is in the
disabled state, new versions of Hyper-V ignore the event and don't inject
the timer interrupt into the VM, and hence the VM hangs when it boots.
Note: when the VM starts/reboots, the LAPIC is pre-enabled by the
firmware, so the window of LAPIC being temporarily disabled is pretty
small, and the issue can only happen once out of 100~200 reboots for
a 40-vCPU VM on one dev host, and on another host the issue doesn't
reproduce after 2000 reboots.
The issue is more noticeable for kdump/kexec, because the LAPIC is
disabled by the first kernel, and stays disabled until the kdump/kexec
kernel enables it. This is especially an issue to a Generation-2 VM
(for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000
(rather than CONFIG_HZ=250) is used.
Fix the issue by moving hv_stimer_alloc() to a later place where the
LAPIC timer is initialized.
Fixes: 4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210116223136.13892-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|