Age | Commit message (Collapse) | Author | Files | Lines |
|
kvm_riscv_vcpu_set_reg_isa_ext function
In the function kvm_riscv_vcpu_set_reg_isa_ext, the original code
used incorrect reg_subtype labels KVM_REG_RISCV_SBI_MULTI_EN/DIS.
These have been corrected to KVM_REG_RISCV_ISA_MULTI_EN/DIS respectively.
Although they are numerically equivalent, the actual processing
will not result in errors, but it may lead to ambiguous code semantics.
Fixes: 613029442a4b ("RISC-V: KVM: Extend ONE_REG to enable/disable multiple ISA extensions")
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/ff1c6771a67d660db94372ac9aaa40f51e5e0090.1716429371.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When the maximum hart number within groups is 1, hart-index-bit is set to
0. Consequently, there is no need to restore the hart ID from IMSIC
addresses and hart-index-bit settings. Currently, QEMU and kvmtool do not
pass correct hart-index-bit values when the maximum hart number is a
power of 2, thereby avoiding this issue. Corresponding patches for QEMU
and kvmtool will also be dispatched.
Fixes: 89d01306e34d ("RISC-V: KVM: Implement device interface for AIA irqchip")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240415064905.25184-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix x86 IRQ vector leak caused by a CPU offlining race
- Fix build failure in the riscv-imsic irqchip driver
caused by an API-change semantic conflict
- Fix use-after-free in irq_find_at_or_after()
* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix regressions of the new x86 CPU VFM (vendor/family/model)
enumeration/matching code
- Fix crash kernel detection on buggy firmware with
non-compliant ACPI MADT tables
- Address Kconfig warning
* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
crypto: x86/aes-xts - switch to new Intel CPU model defines
x86/topology: Handle bogus ACPI tables correctly
x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
um: virtio_uml: Convert to platform remove callback returning void
um: rtc: Convert to platform remove callback returning void
um: Remove unused do_get_thread_area function
um: Fix -Wmissing-prototypes warnings for __vdso_*
um: Add an internal header shared among the user code
um: Fix the declaration of kasan_map_memory
um: Fix the -Wmissing-prototypes warning for get_thread_reg
um: Fix the -Wmissing-prototypes warning for __switch_mm
um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
um: Stop tracking host PID in cpu_tasks
um: process: remove unused 'n' variable
um: vector: remove unused len variable/calculation
um: vector: fix bpfflash parameter evaluation
um: slirp: remove set but unused variable 'pid'
um: signal: move pid variable where needed
um: Makefile: use bash from the environment
um: Add winch to winch_handlers before registering winch IRQ
um: Fix -Wmissing-prototypes warnings for __warp_* and foo
um: Fix -Wmissing-prototypes warnings for text_poke*
um: Move declarations to proper headers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"Jeff Xu's implementation of the mseal() syscall"
* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftest mm/mseal read-only elf memory segment
mseal: add documentation
selftest mm/mseal memory sealing
mseal: add mseal syscall
mseal: wire up mseal syscall
|
|
Klara Modin reported warnings for a kernel configured with BPF_JIT but
without MODULES:
[ 44.131296] Trying to vfree() bad address (000000004a17c299)
[ 44.138024] WARNING: CPU: 1 PID: 193 at mm/vmalloc.c:3189 remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.146675] CPU: 1 PID: 193 Comm: kworker/1:2 Tainted: G D W 6.9.0-01786-g2c9e5d4a0082 #25
[ 44.158229] Hardware name: Raspberry Pi 3 Model B (DT)
[ 44.164433] Workqueue: events bpf_prog_free_deferred
[ 44.170492] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 44.178601] pc : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.183705] lr : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.188772] sp : ffff800082a13c70
[ 44.193112] x29: ffff800082a13c70 x28: 0000000000000000 x27: 0000000000000000
[ 44.201384] x26: 0000000000000000 x25: ffff00003a44efa0 x24: 00000000d4202000
[ 44.209658] x23: ffff800081223dd0 x22: ffff00003a198a40 x21: ffff8000814dd880
[ 44.217924] x20: 00000000d4202000 x19: ffff8000814dd880 x18: 0000000000000006
[ 44.226206] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000002
[ 44.234460] x14: ffff8000811a6370 x13: 0000000020000000 x12: 0000000000000000
[ 44.242710] x11: ffff8000811a6370 x10: 0000000000000144 x9 : ffff8000811fe370
[ 44.250959] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000811fe370
[ 44.259206] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 44.267457] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000002203240
[ 44.275703] Call trace:
[ 44.279158] remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.283858] vfree (mm/vmalloc.c:3322)
[ 44.287835] execmem_free (mm/execmem.c:70)
[ 44.292347] bpf_jit_free_exec+0x10/0x1c
[ 44.297283] bpf_prog_pack_free (kernel/bpf/core.c:1006)
[ 44.302457] bpf_jit_binary_pack_free (kernel/bpf/core.c:1195)
[ 44.307951] bpf_jit_free (include/linux/filter.h:1083 arch/arm64/net/bpf_jit_comp.c:2474)
[ 44.312342] bpf_prog_free_deferred (kernel/bpf/core.c:2785)
[ 44.317785] process_one_work (kernel/workqueue.c:3273)
[ 44.322684] worker_thread (kernel/workqueue.c:3342 (discriminator 2) kernel/workqueue.c:3429 (discriminator 2))
[ 44.327292] kthread (kernel/kthread.c:388)
[ 44.331342] ret_from_fork (arch/arm64/kernel/entry.S:861)
The problem is because bpf_arch_text_copy() silently fails to write to the
read-only area as a result of patch_map() faulting and the resulting
-EFAULT being chucked away.
Update patch_map() to use CONFIG_EXECMEM instead of
CONFIG_STRICT_MODULE_RWX to check for vmalloc addresses.
Link: https://lkml.kernel.org/r/20240521213813.703309-1-rppt@kernel.org
Fixes: 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/7983fbbf-0127-457c-9394-8d6e4299c685@gmail.com
Tested-by: Klara Modin <klarasmodin@gmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The compression format used for boot images is now configurable at
build time, and these formats are shown in `make help`
- access_ok() has been optimized
- A pair of performance bugs have been fixed in the uaccess handlers
- Various fixes and cleanups, including one for the IMSIC build failure
and one for the early-boot ftrace illegal NOPs bug
* tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix early ftrace nop patching
irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
riscv: selftests: Add signal handling vector tests
riscv: mm: accelerate pagefault when badaccess
riscv: uaccess: Relax the threshold for fast path
riscv: uaccess: Allow the last potential unrolled copy
riscv: typo in comment for get_f64_reg
Use bool value in set_cpu_online()
riscv: selftests: Add hwprobe binaries to .gitignore
riscv: stacktrace: fixed walk_stackframe()
ftrace: riscv: move from REGS to ARGS
riscv: do not select MODULE_SECTIONS by default
riscv: show help string for riscv-specific targets
riscv: make image compression configurable
riscv: cpufeature: Fix extension subset checking
riscv: cpufeature: Fix thead vector hwcap removal
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
riscv: Define TASK_SIZE_MAX for __access_ok()
riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small cleanup in the drivers/xen/xenbus Makefile
- a fix of the Xen xenstore driver to improve connecting to a late
started Xenstore
- an enhancement for better support of ballooning in PVH guests
- a cleanup using try_cmpxchg() instead of open coding it
* tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen: Improve the late XenStore init protocol
xen/xenbus: Use *-y instead of *-objs in Makefile
xen/x86: add extra pages to unpopulated-alloc if available
locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()
|
|
Patch series "Introduce mseal", v10.
This patchset proposes a new mseal() syscall for the Linux kernel.
In a nutshell, mseal() protects the VMAs of a given virtual memory range
against modifications, such as changes to their permission bits.
Modern CPUs support memory permissions, such as the read/write (RW) and
no-execute (NX) bits. Linux has supported NX since the release of kernel
version 2.6.8 in August 2004 [1]. The memory permission feature improves
the security stance on memory corruption bugs, as an attacker cannot
simply write to arbitrary memory and point the code to it. The memory
must be marked with the X bit, or else an exception will occur.
Internally, the kernel maintains the memory permissions in a data
structure called VMA (vm_area_struct). mseal() additionally protects the
VMA itself against modifications of the selected seal type.
Memory sealing is useful to mitigate memory corruption issues where a
corrupted pointer is passed to a memory management system. For example,
such an attacker primitive can break control-flow integrity guarantees
since read-only memory that is supposed to be trusted can become writable
or .text pages can get remapped. Memory sealing can automatically be
applied by the runtime loader to seal .text and .rodata pages and
applications can additionally seal security critical data at runtime. A
similar feature already exists in the XNU kernel with the
VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall
[4]. Also, Chrome wants to adopt this feature for their CFI work [2] and
this patchset has been designed to be compatible with the Chrome use case.
Two system calls are involved in sealing the map: mmap() and mseal().
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
The idea that inspired this patch comes from Stephen Röttger’s work in
V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this
API.
Indeed, the Chrome browser has very specific requirements for sealing,
which are distinct from those of most applications. For example, in the
case of libc, sealing is only applied to read-only (RO) or read-execute
(RX) memory segments (such as .text and .RELRO) to prevent them from
becoming writable, the lifetime of those mappings are tied to the lifetime
of the process.
Chrome wants to seal two large address space reservations that are managed
by different allocators. The memory is mapped RW- and RWX respectively
but write access to it is restricted using pkeys (or in the future ARM
permission overlay extensions). The lifetime of those mappings are not
tied to the lifetime of the process, therefore, while the memory is
sealed, the allocators still need to free or discard the unused memory.
For example, with madvise(DONTNEED).
However, always allowing madvise(DONTNEED) on this range poses a security
risk. For example if a jump instruction crosses a page boundary and the
second page gets discarded, it will overwrite the target bytes with zeros
and change the control flow. Checking write-permission before the discard
operation allows us to control when the operation is valid. In this case,
the madvise will only succeed if the executing thread has PKEY write
permissions and PKRU changes are protected in software by control-flow
integrity.
Although the initial version of this patch series is targeting the Chrome
browser as its first user, it became evident during upstream discussions
that we would also want to ensure that the patch set eventually is a
complete solution for memory sealing and compatible with other use cases.
The specific scenario currently in mind is glibc's use case of loading and
sealing ELF executables. To this end, Stephen is working on a change to
glibc to add sealing support to the dynamic linker, which will seal all
non-writable segments at startup. Once this work is completed, all
applications will be able to automatically benefit from these new
protections.
In closing, I would like to formally acknowledge the valuable
contributions received during the RFC process, which were instrumental in
shaping this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Liam R. Howlett: perf optimization.
Linus Torvalds: assisting in defining system call signature and scope.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
MM perf benchmarks
==================
This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to
check the VMAs’ sealing flag, so that no partial update can be made,
when any segment within the given memory range is sealed.
To measure the performance impact of this loop, two tests are developed.
[8]
The first is measuring the time taken for a particular system call,
by using clock_gettime(CLOCK_MONOTONIC). The second is using
PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have
similar results.
The tests have roughly below sequence:
for (i = 0; i < 1000, i++)
create 1000 mappings (1 page per VMA)
start the sampling
for (j = 0; j < 1000, j++)
mprotect one mapping
stop and save the sample
delete 1000 mappings
calculates all samples.
Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz,
4G memory, Chromebook.
Based on the latest upstream code:
The first test (measuring time)
syscall__ vmas t t_mseal delta_ns per_vma %
munmap__ 1 909 944 35 35 104%
munmap__ 2 1398 1502 104 52 107%
munmap__ 4 2444 2594 149 37 106%
munmap__ 8 4029 4323 293 37 107%
munmap__ 16 6647 6935 288 18 104%
munmap__ 32 11811 12398 587 18 105%
mprotect 1 439 465 26 26 106%
mprotect 2 1659 1745 86 43 105%
mprotect 4 3747 3889 142 36 104%
mprotect 8 6755 6969 215 27 103%
mprotect 16 13748 14144 396 25 103%
mprotect 32 27827 28969 1142 36 104%
madvise_ 1 240 262 22 22 109%
madvise_ 2 366 442 76 38 121%
madvise_ 4 623 751 128 32 121%
madvise_ 8 1110 1324 215 27 119%
madvise_ 16 2127 2451 324 20 115%
madvise_ 32 4109 4642 534 17 113%
The second test (measuring cpu cycle)
syscall__ vmas cpu cmseal delta_cpu per_vma %
munmap__ 1 1790 1890 100 100 106%
munmap__ 2 2819 3033 214 107 108%
munmap__ 4 4959 5271 312 78 106%
munmap__ 8 8262 8745 483 60 106%
munmap__ 16 13099 14116 1017 64 108%
munmap__ 32 23221 24785 1565 49 107%
mprotect 1 906 967 62 62 107%
mprotect 2 3019 3203 184 92 106%
mprotect 4 6149 6569 420 105 107%
mprotect 8 9978 10524 545 68 105%
mprotect 16 20448 21427 979 61 105%
mprotect 32 40972 42935 1963 61 105%
madvise_ 1 434 497 63 63 115%
madvise_ 2 752 899 147 74 120%
madvise_ 4 1313 1513 200 50 115%
madvise_ 8 2271 2627 356 44 116%
madvise_ 16 4312 4883 571 36 113%
madvise_ 32 8376 9319 943 29 111%
Based on the result, for 6.8 kernel, sealing check adds
20-40 nano seconds, or around 50-100 CPU cycles, per VMA.
In addition, I applied the sealing to 5.10 kernel:
The first test (measuring time)
syscall__ vmas t tmseal delta_ns per_vma %
munmap__ 1 357 390 33 33 109%
munmap__ 2 442 463 21 11 105%
munmap__ 4 614 634 20 5 103%
munmap__ 8 1017 1137 120 15 112%
munmap__ 16 1889 2153 263 16 114%
munmap__ 32 4109 4088 -21 -1 99%
mprotect 1 235 227 -7 -7 97%
mprotect 2 495 464 -30 -15 94%
mprotect 4 741 764 24 6 103%
mprotect 8 1434 1437 2 0 100%
mprotect 16 2958 2991 33 2 101%
mprotect 32 6431 6608 177 6 103%
madvise_ 1 191 208 16 16 109%
madvise_ 2 300 324 24 12 108%
madvise_ 4 450 473 23 6 105%
madvise_ 8 753 806 53 7 107%
madvise_ 16 1467 1592 125 8 108%
madvise_ 32 2795 3405 610 19 122%
The second test (measuring cpu cycle)
syscall__ nbr_vma cpu cmseal delta_cpu per_vma %
munmap__ 1 684 715 31 31 105%
munmap__ 2 861 898 38 19 104%
munmap__ 4 1183 1235 51 13 104%
munmap__ 8 1999 2045 46 6 102%
munmap__ 16 3839 3816 -23 -1 99%
munmap__ 32 7672 7887 216 7 103%
mprotect 1 397 443 46 46 112%
mprotect 2 738 788 50 25 107%
mprotect 4 1221 1256 35 9 103%
mprotect 8 2356 2429 72 9 103%
mprotect 16 4961 4935 -26 -2 99%
mprotect 32 9882 10172 291 9 103%
madvise_ 1 351 380 29 29 108%
madvise_ 2 565 615 49 25 109%
madvise_ 4 872 933 61 15 107%
madvise_ 8 1508 1640 132 16 109%
madvise_ 16 3078 3323 245 15 108%
madvise_ 32 5893 6704 811 25 114%
For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30
CPU cycles, there is even decrease in some cases.
It might be interesting to compare 5.10 and 6.8 kernel
The first test (measuring time)
syscall__ vmas t_5_10 t_6_8 delta_ns per_vma %
munmap__ 1 357 909 552 552 254%
munmap__ 2 442 1398 956 478 316%
munmap__ 4 614 2444 1830 458 398%
munmap__ 8 1017 4029 3012 377 396%
munmap__ 16 1889 6647 4758 297 352%
munmap__ 32 4109 11811 7702 241 287%
mprotect 1 235 439 204 204 187%
mprotect 2 495 1659 1164 582 335%
mprotect 4 741 3747 3006 752 506%
mprotect 8 1434 6755 5320 665 471%
mprotect 16 2958 13748 10790 674 465%
mprotect 32 6431 27827 21397 669 433%
madvise_ 1 191 240 49 49 125%
madvise_ 2 300 366 67 33 122%
madvise_ 4 450 623 173 43 138%
madvise_ 8 753 1110 357 45 147%
madvise_ 16 1467 2127 660 41 145%
madvise_ 32 2795 4109 1314 41 147%
The second test (measuring cpu cycle)
syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma %
munmap__ 1 684 1790 1106 1106 262%
munmap__ 2 861 2819 1958 979 327%
munmap__ 4 1183 4959 3776 944 419%
munmap__ 8 1999 8262 6263 783 413%
munmap__ 16 3839 13099 9260 579 341%
munmap__ 32 7672 23221 15549 486 303%
mprotect 1 397 906 509 509 228%
mprotect 2 738 3019 2281 1140 409%
mprotect 4 1221 6149 4929 1232 504%
mprotect 8 2356 9978 7622 953 423%
mprotect 16 4961 20448 15487 968 412%
mprotect 32 9882 40972 31091 972 415%
madvise_ 1 351 434 82 82 123%
madvise_ 2 565 752 186 93 133%
madvise_ 4 872 1313 442 110 151%
madvise_ 8 1508 2271 763 95 151%
madvise_ 16 3078 4312 1234 77 140%
madvise_ 32 5893 8376 2483 78 142%
From 5.10 to 6.8
munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma.
mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma.
madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma.
In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the
increase from 5.10 to 6.8 is significantly larger, approximately ten times
greater for munmap and mprotect.
When I discuss the mm performance with Brian Makin, an engineer who worked
on performance, it was brought to my attention that such performance
benchmarks, which measuring millions of mm syscall in a tight loop, may
not accurately reflect real-world scenarios, such as that of a database
service. Also this is tested using a single HW and ChromeOS, the data
from another HW or distribution might be different. It might be best to
take this data with a grain of salt.
This patch (of 5):
Wire up mseal syscall for all architectures.
Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com> [Bug #2]
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of
interrupt affinity reconfiguration via procfs. Instead, the change is
deferred until the next instance of the interrupt being triggered on the
original CPU.
When the interrupt next triggers on the original CPU, the new affinity is
enforced within __irq_move_irq(). A vector is allocated from the new CPU,
but the old vector on the original CPU remains and is not immediately
reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming
process is delayed until the next trigger of the interrupt on the new CPU.
Upon the subsequent triggering of the interrupt on the new CPU,
irq_complete_move() adds a task to the old CPU's vector_cleanup list if it
remains online. Subsequently, the timer on the old CPU iterates over its
vector_cleanup list, reclaiming old vectors.
However, a rare scenario arises if the old CPU is outgoing before the
interrupt triggers again on the new CPU.
In that case irq_force_complete_move() is not invoked on the outgoing CPU
to reclaim the old apicd->prev_vector because the interrupt isn't currently
affine to the outgoing CPU, and irq_needs_fixup() returns false. Even
though __vector_schedule_cleanup() is later called on the new CPU, it
doesn't reclaim apicd->prev_vector; instead, it simply resets both
apicd->move_in_progress and apicd->prev_vector to 0.
As a result, the vector remains unreclaimed in vector_matrix, leading to a
CPU vector leak.
To address this issue, move the invocation of irq_force_complete_move()
before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the
interrupt is currently or used to be affine to the outgoing CPU.
Additionally, reclaim the vector in __vector_schedule_cleanup() as well,
following a warning message, although theoretically it should never see
apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU.
Fixes: f0383c24b485 ("genirq/cpuhotplug: Add support for cleaning up move in progress")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240522220218.162423-1-dongli.zhang@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Avoid on-stack cpumask variables in a number of places
- Move struct termio to asm/termios.h, matching other architectures and
allowing certain user space applications to build also for sparc
- Fix missing prototype warnings for sparc64
- Fix version generation warnings for sparc32
- Fix bug where non-consecutive CPU IDs lead to some CPUs not starting
- Simplification using swap and cleanup using NULL for pointer
- Convert sparc parport and chmc drivers to use remove callbacks
returning void
* tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/leon: Remove on-stack cpumask var
sparc/pci_msi: Remove on-stack cpumask var
sparc/of: Remove on-stack cpumask var
sparc/irq: Remove on-stack cpumask var
sparc/srmmu: Remove on-stack cpumask var
sparc: chmc: Convert to platform remove callback returning void
sparc: parport: Convert to platform remove callback returning void
sparc: Compare pointers to NULL instead of 0
sparc: Use swap() to fix Coccinelle warning
sparc32: Fix version generation failed warnings
sparc64: Fix number of online CPUs
sparc64: Fix prototype warning for sched_clock
sparc64: Fix prototype warnings in adi_64.c
sparc64: Fix prototype warning for dma_4v_iotsb_bind
sparc64: Fix prototype warning for uprobe_trap
sparc64: Fix prototype warning for alloc_irqstack_bootmem
sparc64: Fix prototype warning for vmemmap_free
sparc64: Fix prototype warnings in traps_64.c
sparc64: Fix prototype warning for init_vdso_image
sparc: move struct termio to asm/termios.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
Commit c97bf629963e ("riscv: Fix text patching when IPI are used")
converted ftrace_make_nop() to use patch_insn_write() which does not
emit any icache flush relying entirely on __ftrace_modify_code() to do
that.
But we missed that ftrace_make_nop() was called very early directly when
converting mcount calls into nops (actually on riscv it converts 2B nops
emitted by the compiler into 4B nops).
This caused crashes on multiple HW as reported by Conor and Björn since
the booting core could have half-patched instructions in its icache
which would trigger an illegal instruction trap: fix this by emitting a
local flush icache when early patching nops.
Fixes: c97bf629963e ("riscv: Fix text patching when IPI are used")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240523115134.70380-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
This series contains two minor fixes for the extension parsing in
cpufeature.c.
Some T-Head boards without vector 1.0 support report "v" in the isa
string in their DT which will cause the kernel to run vector code. The
code to blacklist "v" from these boards was doing so by using
riscv_cached_mvendorid() which has not been populated at the time of
extension parsing. This fix instead greedily reads the mvendorid CSR of
the boot hart to determine if the cpu is from T-Head.
The other fix is for an incorrect indexing bug. riscv extensions
sometimes imply other extensions. When adding these "subset" extensions
to the hardware capabilities array, they need to be checked if they are
valid. The current code only checks if the extension that is including
other extensions is valid and not the subset extensions.
These patches were previously included in:
https://lore.kernel.org/lkml/20240420-dev-charlie-support_thead_vector_6_9-v3-0-67cff4271d1d@rivosinc.com/
* b4-shazam-merge:
riscv: cpufeature: Fix extension subset checking
riscv: cpufeature: Fix thead vector hwcap removal
Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-0-b3d1a088722d@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The access_error() of vma already checked under per-VMA lock, if it
is a bad access, directly handle error, no need to retry with mmap_lock
again. Since the page faut is handled under per-VMA lock, count it as
a vma lock event with VMA_LOCK_SUCCESS.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The bytes copy for unaligned head would cover at most SZREG-1 bytes, so
it's better to set the threshold as >= (SZREG-1 + word_copy stride size)
which equals to 9*SZREG-1.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240313091929.4029960-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When the dst buffer pointer points to the last accessible aligned addr, we
could still run another iteration of unrolled copy.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240313103334.4036554-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Signed-off-by: Xingyou Chen <rockrush@rockwork.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240317055556.9449-1-rockrush@rockwork.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The declaration of set_cpu_online() takes a bool value. So replace
int here to make it consistent with the declaration.
Signed-off-by: Zhao Ke <ke.zhao@shingroup.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240318065404.123668-1-ke.zhao@shingroup.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Nam Cao <namcao@linutronix.de> says:
The debug_pagealloc feature is not functional on RISCV. With this feature
enabled (CONFIG_DEBUG_PAGEALLOC=y and debug_pagealloc=on), kernel crashes
early during boot.
QEMU command that can reproduce this problem:
qemu-system-riscv64 -machine virt \
-kernel Image \
-append "console=ttyS0 root=/dev/vda debug_pagealloc=on" \
-nographic \
-drive "file=root.img,format=raw,id=hd0" \
-device virtio-blk-device,drive=hd0 \
-m 4G \
This series makes debug_pagealloc functional.
* b4-shazam-merge:
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
Link: https://lore.kernel.org/r/cover.1715750938.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If the load access fault occures in a leaf function (with
CONFIG_FRAME_POINTER=y), when wrong stack trace will be displayed:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
---[ end trace 0000000000000000 ]---
Registers dump:
ra 0xffffffff80485758 <regmap_mmio_read+36>
sp 0xffffffc80200b9a0
fp 0xffffffc80200b9b0
pc 0xffffffff804853ba <regmap_mmio_read32le+6>
Stack dump:
0xffffffc80200b9a0: 0xffffffc80200b9e0 0xffffffc80200b9e0
0xffffffc80200b9b0: 0xffffffff8116d7e8 0x0000000000000100
0xffffffc80200b9c0: 0xffffffd8055b9400 0xffffffd8055b9400
0xffffffc80200b9d0: 0xffffffc80200b9f0 0xffffffff8047c526
0xffffffc80200b9e0: 0xffffffc80200ba30 0xffffffff8047fe9a
The assembler dump of the function preambula:
add sp,sp,-16
sd s0,8(sp)
add s0,sp,16
In the fist stack frame, where ra is not stored on the stack we can
observe:
0(sp) 8(sp)
.---------------------------------------------.
sp->| frame->fp | frame->ra (saved fp) |
|---------------------------------------------|
fp->| .... | .... |
|---------------------------------------------|
| | |
and in the code check is performed:
if (regs && (regs->epc == pc) && (frame->fp & 0x7))
I see no reason to check frame->fp value at all, because it is can be
uninitialized value on the stack. A better way is to check frame->ra to
be an address on the stack. After the stacktrace shows as expect:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
[<ffffffff80485758>] regmap_mmio_read+0x24/0x52
[<ffffffff8047c526>] _regmap_bus_reg_read+0x1a/0x22
[<ffffffff8047fe9a>] _regmap_read+0x5c/0xea
[<ffffffff80480376>] _regmap_update_bits+0x76/0xc0
...
---[ end trace 0000000000000000 ]---
As pointed by Samuel Holland it is incorrect to remove check of the stackframe
entirely.
Changes since v2 [2]:
- Add accidentally forgotten curly brace
Changes since v1 [1]:
- Instead of just dropping frame->fp check, replace it with validation of
frame->ra, which should be a stack address.
- Move frame pointer validation into the separate function.
[1] https://lore.kernel.org/linux-riscv/20240426072701.6463-1-dev.mbstr@gmail.com/
[2] https://lore.kernel.org/linux-riscv/20240521131314.48895-1-dev.mbstr@gmail.com/
Fixes: f766f77a74f5 ("riscv/stacktrace: Fix stack output without ra on the stack top")
Signed-off-by: Matthew Bystrin <dev.mbstr@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240521191727.62012-1-dev.mbstr@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This commit replaces riscv's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This is required for the ongoing effort to stop
relying on stop_machine() for RISCV's implementation of ftrace.
The main relevant benefit that this change will bring for the above
use-case is that now we don't have separate ftrace_caller and
ftrace_regs_caller trampolines. This will allow the callsite to call
ftrace_caller by modifying a single instruction. Now the callsite can
do something similar to:
When not tracing: | When tracing:
func: func:
auipc t0, ftrace_caller_top auipc t0, ftrace_caller_top
nop <=========<Enable/Disable>=========> jalr t0, ftrace_caller_bottom
[...] [...]
The above assumes that we are dropping the support of calling a direct
trampoline from the callsite. We need to drop this as the callsite can't
change the target address to call, it can only enable/disable a call to
a preset target (ftrace_caller in the above diagram). We can later optimize
this by calling an intermediate dispatcher trampoline before ftrace_caller.
Currently, ftrace_regs_caller saves all CPU registers in the format of
struct pt_regs and allows the tracer to modify them. We don't need to
save all of the CPU registers because at function entry only a subset of
pt_regs is live:
|----------+----------+---------------------------------------------|
| Register | ABI Name | Description |
|----------+----------+---------------------------------------------|
| x1 | ra | Return address for traced function |
| x2 | sp | Stack pointer |
| x5 | t0 | Return address for ftrace_caller trampoline |
| x8 | s0/fp | Frame pointer |
| x10-11 | a0-1 | Function arguments/return values |
| x12-17 | a2-7 | Function arguments |
|----------+----------+---------------------------------------------|
See RISCV calling convention[1] for the above table.
Saving just the live registers decreases the amount of stack space
required from 288 Bytes to 112 Bytes.
Basic testing was done with this on the VisionFive 2 development board.
Note:
- Moving from REGS to ARGS will mean that RISCV will stop supporting
KPROBES_ON_FTRACE as it requires full pt_regs to be saved.
- KPROBES_ON_FTRACE will be supplanted by FPROBES see [2].
[1] https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
[2] https://lore.kernel.org/all/170887410337.564249.6360118840946697039.stgit@devnote2/
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240405142453.4187-1-puranjay@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series optimizes access_ok() by defining TASK_SIZE_MAX. At Alex's
suggestion, I also tried making TASK_SIZE constant (specifically by
making PGDIR_SHIFT a variable instead of a ternary expression, then
replacing the load with an immediate using ALTERNATIVE). This appeared
to slightly improve performance on some implementations (C906) but
regressed it on others (FU740). So I am leaving further optimizations to
a later series.
* b4-shazam-merge:
riscv: Define TASK_SIZE_MAX for __access_ok()
riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
Link: https://lore.kernel.org/r/20240327143858.711792-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since commit aad15bc85c18 ("riscv: Change code model of module to
medany to improve data accessing"), kernel modules have not been built
with -fPIC, so they wouldn't have R_RISCV_GOT_HI20 or R_RISCV_CALL_PLT
relocations, and handling of those relocations is unnecessary.
If RELOCATABLE=y, kernel modules will be built with -fPIE, which would
reintroduce said relocations, so only select MODULE_SECTIONS when
RELOCATABLE.
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240511015725.1162-1-dqfext@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Define the archhelp variable so that 'make ACRH=riscv help' will show
the targets specific to building a RISC-V kernel like other
architectures.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240504193446.196886-3-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Previously the build process would always set KBUILD_IMAGE to the
uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
unconditionally compress it into Image.gz. However there are already
build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
Image.zstd, so let's make use of those, make the compression method
configurable and set KBUILD_IMAGE accordingly so that targets like
'make install' and 'make bindeb-pkg' will use the chosen image.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240504193446.196886-2-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Merge trivial x86 code generation annoyances
- Introduce helper macros for clang asm input problems
- use said macros to improve trivially stupid code generation issues in
bitops and array_index_mask_nospec
- also improve codegen with 32-bit array index comparisons
None of these really matter, but I look at code generation and profiles
fairly regularly, and these misfeatures caused the generated code to
look really odd and distract from the real issues.
* branch 'x86-codegen' of local tree:
x86: improve bitop code generation with clang
x86: improve array_index_mask_nospec() code generation
clang: work around asm input constraint problems
|
|
This uses the new ASM_INPUT_RM macro to avoid the bad code generation
issue that clang has with more generic asm inputs.
This ends up avoiding generating code like this:
mov %r10,(%rsp)
tzcnt (%rsp),%rcx
which now becomes just
tzcnt %r10,%rcx
and in the process ends up also removing a few unnecessary stack frames
when the only use was that pointless "asm uses memory location off stack".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't force the inputs to be 'unsigned long', when the comparison can
easily be done in 32-bit if that's more appropriate.
Note that while we can look at the inputs to choose an appropriate size
for the compare instruction, the output is fixed at 'unsigned long'.
That's not technically optimal either, since a 32-bit 'sbbl' would often
be sufficient.
But for the outgoing mask we don't know how the mask ends up being used
(ie we have uses that have an incoming 32-bit array index, but end up
using the mask for other things). That said, it only costs the extra
REX prefix to always generate the 64-bit mask.
[ A 'sbbl' also always technically generates a 64-bit mask, but with the
upper 32 bits clear: that's fine for when the incoming index that will
be masked is already 32-bit, but not if you use the mask to mask a
pointer afterwards, like the file table lookup does ]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select some options in Kconfig
- Give a chance to build with !CONFIG_SMP
- Switch to use built-in rustc target
- Add new supported device nodes to dts
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add new supported device nodes to Loongson-2K2000
LoongArch: dts: Add new supported device nodes to Loongson-2K0500
LoongArch: dts: Remove "disabled" state of clock controller node
LoongArch: rust: Switch to use built-in rustc target
LoongArch: Fix callchain parse error with kernel tracepoint events again
LoongArch: Give a chance to build with !CONFIG_SMP
LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
|
|
This loop is supposed to check if ext->subset_ext_ids[j] is valid, rather
than if ext->subset_ext_ids[i] is valid, before setting the extension
id ext->subset_ext_ids[j] in isainfo->isa.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Fixes: 0d8295ed975b ("riscv: add ISA extension parsing for scalar crypto")
Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-2-b3d1a088722d@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The riscv_cpuinfo struct that contains mvendorid and marchid is not
populated until all harts are booted which happens after the DT parsing.
Use the mvendorid/marchid from the boot hart to determine if the DT
contains an invalid V.
Fixes: d82f32202e0d ("RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-1-b3d1a088722d@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull microblaze updates from Michal Simek:
- Cleanup code around removed early_printk
* tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Remove early printk call from cpuinfo-static.c
microblaze: Remove gcc flag for non existing early_printk.c file
|
|
__kernel_map_pages() is a debug function which clears the valid bit in page
table entry for deallocated pages to detect illegal memory accesses to
freed pages.
This function set/clear the valid bit using __set_memory(). __set_memory()
acquires init_mm's semaphore, and this operation may sleep. This is
problematic, because __kernel_map_pages() can be called in atomic context,
and thus is illegal to sleep. An example warning that this causes:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
preempt_count: 2, expected: 0
CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff800060dc>] dump_backtrace+0x1c/0x24
[<ffffffff8091ef6e>] show_stack+0x2c/0x38
[<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72
[<ffffffff8092bb24>] dump_stack+0x14/0x1c
[<ffffffff8003b7ac>] __might_resched+0x104/0x10e
[<ffffffff8003b7f4>] __might_sleep+0x3e/0x62
[<ffffffff8093276a>] down_write+0x20/0x72
[<ffffffff8000cf00>] __set_memory+0x82/0x2fa
[<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4
[<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a
[<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba
[<ffffffff80011904>] copy_process+0x72c/0x17ec
[<ffffffff80012ab4>] kernel_clone+0x60/0x2fe
[<ffffffff80012f62>] kernel_thread+0x82/0xa0
[<ffffffff8003552c>] kthreadd+0x14a/0x1be
[<ffffffff809357de>] ret_from_fork+0xe/0x1c
Rewrite this function with apply_to_existing_page_range(). It is fine to
not have any locking, because __kernel_map_pages() works with pages being
allocated/deallocated and those pages are not changed by anyone else in the
meantime.
Fixes: 5fde3db5eb02 ("riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/1289ecba9606a19917bc12b6c27da8aa23e1e5ae.1715750938.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
debug_pagealloc is a debug feature which clears the valid bit in page table
entry for freed pages to detect illegal accesses to freed memory.
For this feature to work, virtual mapping must have PAGE_SIZE resolution.
(No, we cannot map with huge pages and split them only when needed; because
pages can be allocated/freed in atomic context and page splitting cannot be
done in atomic context)
Force linear mapping to use small pages if debug_pagealloc is enabled.
Note that it is not necessary to force the entire linear mapping, but only
those that are given to memory allocator. Some parts of memory can keep
using huge page mapping (for example, kernel's executable code). But these
parts are minority, so keep it simple. This is just a debug feature, some
extra overhead should be acceptable.
Fixes: 5fde3db5eb02 ("riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/2e391fa6c6f9b3fcf1b41cefbace02ee4ab4bf59.1715750938.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
virtio core already sets the .owner, so driver does not need to.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-5-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
TIF_FOREIGN_FPSTATE is a 'convenience' flag that should reflect whether
the current CPU holds the most recent user mode FP/SIMD state of the
current task. It combines two conditions:
- whether the current CPU's FP/SIMD state belongs to the task;
- whether that state is the most recent associated with the task (as a
task may have executed on other CPUs as well).
When a task is scheduled in and TIF_KERNEL_FPSTATE is set, it means the
task was in a kernel mode NEON section when it was scheduled out, and so
the kernel mode FP/SIMD state is restored. Since this implies that the
current CPU is *not* holding the most recent user mode FP/SIMD state of
the current task, the TIF_FOREIGN_FPSTATE flag is set too, so that the
user mode FP/SIMD state is reloaded from memory when returning to
userland.
However, the task may be scheduled out after completing the kernel mode
NEON section, but before returning to userland. When this happens, the
TIF_FOREIGN_FPSTATE flag will not be preserved, but will be set as usual
the next time the task is scheduled in, and will be based on the above
conditions.
This means that, rather than setting TIF_FOREIGN_FPSTATE when scheduling
in a task with TIF_KERNEL_FPSTATE set, the underlying state should be
updated so that TIF_FOREIGN_FPSTATE will assume the expected value as a
result.
So instead, call fpsimd_flush_cpu_state(), which takes care of this.
Closes: https://lore.kernel.org/all/cb8822182231850108fa43e0446a4c7f@kernel.org
Reported-by: Johannes Nixdorf <mixi@shadowice.org>
Fixes: aefbab8e77eb ("arm64: fpsimd: Preserve/restore kernel mode NEON at context switch")
Cc: Mark Brown <broonie@kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Janne Grunau <j@jannau.net>
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Tested-by: Johannes Nixdorf <mixi@shadowice.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240522091335.335346-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit b8995a18417088bb53f87c49d200ec72a9dd4ec1.
Ard managed to reproduce the dm-crypt corruption problem and got to the
bottom of it, so re-apply the problematic patch in preparation for
fixing things properly.
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */ <--- 443
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
to:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_VFM(INTEL_HASWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_BROADWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_ANY, 1), /* SNC */
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
On an Intel CPU with SNC enabled this code previously matched the rule on line
443 to avoid printing messages about insane cache configuration. The new code
did not match any rules.
Expanding the macros for the intel_cod_cpu[] array shows that the old is
equivalent to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
while the new code expands to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
Looking at the code for x86_match_cpu():
const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
{
const struct x86_cpu_id *m;
struct cpuinfo_x86 *c = &boot_cpu_data;
for (m = match;
m->vendor | m->family | m->model | m->steppings | m->feature;
m++) {
...
}
return NULL;
it is clear that there was no match because the ANY entry in the table (array
index 2) is now the loop termination condition (all of vendor, family, model,
steppings, and feature are zero).
So this code was working before because the "ANY" check was looking for any
Intel CPU in family 6. But fails now because the family is a wild card. So the
root cause is that x86_match_cpu() has never been able to match on a rule with
just X86_VENDOR_INTEL and all other fields set to wildcards.
Add a new flags field to struct x86_cpu_id that has a bit set to indicate that
this entry in the array is valid. Update X86_MATCH*() macros to set that bit.
Change the end-marker check in x86_match_cpu() to just check the flags field
for this bit.
Backporter notes: The commit in Fixes is really the one that is broken:
you can't have m->vendor as part of the loop termination conditional in
x86_match_cpu() because it can happen - as it has happened above
- that that whole conditional is 0 albeit vendor == 0 is a valid case
- X86_VENDOR_INTEL is 0.
However, the only case where the above happens is the SNC check added by
4db64279bc2b1 so you only need this fix if you have backported that
other commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines")
Fixes: 644e9cbbe3fc ("Add driver auto probing for x86 features v4")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable+noautosel@kernel.org> # see above
Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local
|