summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-10-14Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-50/+78
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
2014-10-14Merge branch 'kbuild' of ↵Linus Torvalds20-74/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix for handling dependencies of *-objs targets by Masahiro Yamada - lots of cleanups in the kbuild machinery, also by Masahiro - fixes for the kconfig build to use an UTF-8 capable ncurses library if possible and to build on not-so-standard installs - some more minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Do not reference *-n variables in the Makefile kbuild: simplify build, clean, modbuiltin shorthands kbuild: arm: Do not define "comma" twice kbuild: remove obj-n and lib-n handling kbuild: remove unnecessary variable initializaions kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: handle C=... and M=... after entering into build directory kbuild: use $(Q) for sub-make target kbuild: fake the "Entering directory ..." message more simply kconfig/lxdialog: get ncurses CFLAGS with pkg-config kconfig: nconfig: fix multi-byte UTF handling kconfig: lxdialog: fix spelling kbuild: Make scripts executable kbuild: remove redundant clean-files from scripts/kconfig/Makefile kbuild: refactor script/kconfig/Makefile kbuild: handle the dependency of multi-objs hostprogs appropriately kbuild: handle multi-objs dependency appropriately
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds11-71/+96
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14Merge branch 'for-next' of ↵Linus Torvalds59-37/+40
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: "The major change is to remove the arch/m68k/platform directory. The coldfire (and other non-mmu m68k platform) code is moved to the arch/m68k level, making them consistent with the traditional m68k platforms. A couple of other minor miscellaneous fixes as well" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Fix typo 'COFNIG_MBAR' m68knommu: add missing ioport_map() and ioport_unmap() m68k/coldfire: remove second asm/mcfclk.h inclusion in m54xx.c m68knommu: fix size of address field for 5272 interrupt controller m68k: fix crufty 68000 and 68360 intro comments m68k: remove the unused arch/m68k/platform directory m68k: move non-mmu 68360 platform code m68k: move non-mmu 68000 platform code m68k: fix crufty ColdFire intro comments m68k: move coldfire platform code
2014-10-14Merge tag 'please-pull-sys_bpf' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "Wire up bpf syscall for ia64" * tag 'please-pull-sys_bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable bpf syscall for ia64
2014-10-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds11-331/+153
Pull UML update from Richard Weinberger: "Besides of fixes this contains also support for CONFIG_STACKTRACE by Daniel Walter" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: net: Eliminate NULL test after alloc_bootmem um: Add support for CONFIG_STACKTRACE um: ubd: Fix for processes stuck in D state forever um: delete unnecessary bootmem struct page array um: remove csum_partial_copy_generic_i386 to clean up exception table
2014-10-14Merge branch 'for-linus' of ↵Linus Torvalds73-911/+2399
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "This patch set contains the main portion of the changes for 3.18 in regard to the s390 architecture. It is a bit bigger than usual, mainly because of a new driver and the vector extension patches. The interesting bits are: - Quite a bit of work on the tracing front. Uprobes is enabled and the ftrace code is reworked to get some of the lost performance back if CONFIG_FTRACE is enabled. - To improve boot time with CONFIG_DEBIG_PAGEALLOC, support for the IPTE range facility is added. - The rwlock code is re-factored to improve writer fairness and to be able to use the interlocked-access instructions. - The kernel part for the support of the vector extension is added. - The device driver to access the CD/DVD on the HMC is added, this will hopefully come in handy to improve the installation process. - Add support for control-unit initiated reconfiguration. - The crypto device driver is enhanced to enable the additional AP domains and to allow the new crypto hardware to be used. - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/ftrace: simplify enabling/disabling of ftrace_graph_caller s390/ftrace: remove 31 bit ftrace support s390/kdump: add support for vector extension s390/disassembler: add vector instructions s390: add support for vector extension s390/zcrypt: Toleration of new crypto hardware s390/idle: consolidate idle functions and definitions s390/nohz: use a per-cpu flag for arch_needs_cpu s390/vtime: do not reset idle data on CPU hotplug s390/dasd: add support for control unit initiated reconfiguration s390/dasd: fix infinite loop during format s390/mm: make use of ipte range facility s390/setup: correct 4-level kernel page table detection s390/topology: call set_sched_topology early s390/uprobes: architecture backend for uprobes s390/uprobes: common library for kprobes and uprobes s390/rwlock: use the interlocked-access facility 1 instructions s390/rwlock: improve writer fairness s390/rwlock: remove interrupt-enabling rwlock variant. s390/mm: remove change bit override support ...
2014-10-14Merge branches 'x86-ras-for-linus', 'x86-uv-for-linus' and ↵Linus Torvalds3-9/+9
'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ras, uv and vdso fixlets from Ingo Molnar: "ras: tone down a kernel message to only occur during initial bootup, not during suspend/resume cycles. uv: a cleanup commit vdso: a fix to error checking" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid showing repetitive message from intel_init_thermal() * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/uv: Remove unnecessary #ifdef * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso2c's special_pages[] error checking
2014-10-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc smaller fixes that missed the v3.17 cycle" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Add arch/x86/purgatory/ make generated files to gitignore x86: Fix section conflict for numachip x86: Reject x32 executables if x32 ABI not supported x86_64, entry: Filter RFLAGS.NT on entry from userspace x86, boot, kaslr: Fix nuisance warning on 32-bit builds
2014-10-14Merge branch 'x86-seccomp-for-linus' of ↵Linus Torvalds9-67/+184
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 seccomp changes from Ingo Molnar: "This tree includes x86 seccomp filter speedups and related preparatory work, which touches core seccomp facilities as well. The main idea is to split seccomp into two phases, to be able to enter a simple fast path for syscalls with ptrace side effects. There's no substantial user-visible (and ABI) effects expected from this, except a change in how we emit a better audit record for SECCOMP_RET_TRACE events" * 'x86-seccomp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64, entry: Use split-phase syscall_trace_enter for 64-bit syscalls x86_64, entry: Treat regs->ax the same in fastpath and slowpath syscalls x86: Split syscall_trace_enter into two phases x86, entry: Only call user_exit if TIF_NOHZ x86, x32, audit: Fix x32's AUDIT_ARCH wrt audit seccomp: Document two-phase seccomp and arch-provided seccomp_data seccomp: Allow arch code to provide seccomp_data seccomp: Refactor the filter callback and the API seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
2014-10-14Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds6-10/+186
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this tree are: - fix and update Intel Quark [Galileo] SoC platform support - update IOSF chipset side band interface and make it available via debugfs - enable HPETs on Soekris net6501 and other e6xx based systems" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add cpu_detect_cache_sizes to init_intel() add Quark legacy_cache() x86: Quark: Comment setup_arch() to document TLB/PGE bug x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead x86/platform/intel/iosf: Add debugfs config option for IOSF x86/platform/intel/iosf: Add better description of IOSF driver in config x86/platform/intel/iosf: Add Braswell PCI ID x86/platform/pmc_atom: Fix warning when CONFIG_DEBUG_FS=n x86: HPET force enable for e6xx based systems x86/iosf: Add debugfs support x86/iosf: Add Kconfig prompt for IOSF_MBI selection
2014-10-14Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds8-77/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "This tree includes the following changes: - fix memory hotplug - fix hibernation bootup memory layout assumptions - fix hyperv numa guest kernel messages - remove dead code - update documentation" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Update memory map description to list hypervisor-reserved area x86/mm, hibernate: Do not assume the first e820 area to be RAM x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() x86/mm/hotplug: Modify PGD entry when removing memory x86/mm/hotplug: Pass sync_global_pgds() a correct argument in remove_pagetable() x86: Remove set_pmd_pfn
2014-10-14Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds4-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Ingo Molnar: "Misc smaller cleanups" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, intel: Fix total_size computation x86, microcode, intel: Rename apply_microcode and declare it static x86, microcode, intel: Fix typos x86, microcode, intel: Add missing static declarations x86, microcode, amd: Fix missing static declaration
2014-10-14Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds6-19/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU updates from Ingo Molnar: "x86 FPU handling fixes, cleanups and enhancements from Oleg. The signal handling race fix and the __restore_xstate_sig() preemption fix for eager-mode is marked for -stable as well" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: copy_thread: Don't nullify ->ptrace_bps twice x86, fpu: Shift "fpu_counter = 0" from copy_thread() to arch_dup_task_struct() x86, fpu: copy_process: Sanitize fpu->last_cpu initialization x86, fpu: copy_process: Avoid fpu_alloc/copy if !used_math() x86, fpu: Change __thread_fpu_begin() to use use_eager_fpu() x86, fpu: __restore_xstate_sig()->math_state_restore() needs preempt_disable() x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()
2014-10-14Merge branch 'x86-cpufeature-for-linus' of ↵Linus Torvalds6-29/+74
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpufeature updates from Ingo Molnar: "This tree includes the following changes: - Introduce DISABLED_MASK to list disabled CPU features, to simplify CPU feature handling and avoid excessive #ifdefs - Remove the lightly used cpu_has_pae() primitive" * 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add more disabled features x86: Introduce disabled-features x86: Axe the lightly-used cpu_has_pae
2014-10-14ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[]Geert Uytterhoeven1-1/+1
They're already provided by <asm/sections.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14frv: remove unused declarations of __start___ex_table and __stop___ex_tableGeert Uytterhoeven1-2/+0
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14kvm: ensure hard lockup detection is disabled by defaultUlrich Obergfell1-0/+8
Use watchdog_enable_hardlockup_detector() to set hard lockup detection's default value to false. It's risky to run this detection in a guest, as false positives are easy to trigger, especially if the host is overcommitted. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggableXishi Qiu1-44/+45
If all the nodes are marked hotpluggable, alloc node data will fail. Because __next_mem_range_rev() will skip the hotpluggable memory regions. numa_clear_kernel_node_hotplug() is called after alloc node data. numa_init() ... ret = init_func(); // this will mark hotpluggable flag from SRAT ... memblock_set_bottom_up(false); ... ret = numa_register_memblks(&numa_meminfo); // this will alloc node data(pglist_data) ... numa_clear_kernel_node_hotplug(); // in case all the nodes are hotpluggable ... numa_register_memblks() setup_node_data() memblock_find_in_range_node() __memblock_find_range_top_down() for_each_mem_range_rev() __next_mem_range_rev() This patch moves numa_clear_kernel_node_hotplug() into numa_register_memblks(), clear kernel node hotpluggable flag before alloc node data, then alloc node data won't fail even all the nodes are hotpluggable. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Dave Jones <davej@redhat.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14ARM: replace strnicmp with strncasecmpRasmus Villemoes1-6/+6
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14arch/x86/kernel/cpu/common.c: fix unused symbol warningAndrew Morton1-1/+3
x86_64 allnoconfig: arch/x86/kernel/cpu/common.c:968: warning: 'syscall32_cpu_init' defined but not used Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14x86: use optimized ioresource lookup in ioremap functionMike Travis1-4/+16
Use the optimized ioresource lookup, "region_is_ram", for the ioremap function. If the region is not found, it falls back to the "page_is_ram" function. If it is found and it is RAM, then the usual warning message is issued, and the ioremap operation is aborted. Otherwise, the ioremap operation continues. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Alex Thorlton <athorlton@sgi.com> Reviewed-by: Cliff Wickman <cpw@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mark Salter <msalter@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14kexec-bzimage64: fix sparse warningsVivek Goyal1-7/+8
David Howells brought to my attention the mails generated by kbuild test bot and following sparse warnings were present. This patch fixes these warnings. arch/x86/kernel/kexec-bzimage64.c:270:5: warning: symbol 'bzImage64_probe' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:328:6: warning: symbol 'bzImage64_load' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:517:5: warning: symbol 'bzImage64_cleanup' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:531:5: warning: symbol 'bzImage64_verify_sig' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:546:23: warning: symbol 'kexec_bzImage64_ops' was not declared. Should it be static? Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14kexec: check if crashk_res_low exists when exclude it from crash mem rangesBaoquan He1-4/+6
Add a check if crashk_res_low exists just like GART region does. If crashk_res_low doesn't exist, calling exclude_mem_range is unnecessary. Meanwhile, since crashk_res_low has been initialized at definition, it's safe just use "if (crashk_low_res.end)" to check if it's exist. And this can make it consistent with other places of check. Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14arch/x86/purgatory/Makefile: try to use automatic variable in kexec ↵Baoquan He1-1/+2
purgatory makefile Make the Makefile of kexec purgatory be consistent with others in linux src tree, and make it look generic and simple. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14ARM: dts: fix wrong compatible string of Exynos3250 RTC dt nodeChanwoo Choi1-1/+1
Fix wrong compatible string of Exynos3250 RTC (Real-Time Clock) dt node. The RTC of Exynos3250 must need additional source clock (XrtcXTI). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13um: net: Eliminate NULL test after alloc_bootmemHimangi Saraogi1-4/+0
alloc_bootmem and related functions never return NULL. Thus a NULL test or memset after calls to these functions is unnecessary. The following Coccinelle semantic patch was used for making the change: @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E - if (E == NULL) S Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13um: Add support for CONFIG_STACKTRACEDaniel Walter5-53/+142
Add stacktrace support for User Mode Linux Signed-off-by: Daniel Walter <dwalter@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13um: ubd: Fix for processes stuck in D state foreverThorsten Knabe1-2/+3
Starting with Linux 3.12 processes get stuck in D state forever in UserModeLinux under sync heavy workloads. This bug was introduced by commit 805f11a0d5 (um: ubd: Add REQ_FLUSH suppport). Fix bug by adding a check if FLUSH request was successfully submitted to the I/O thread and keeping the FLUSH request on the request queue on submission failures. Fixes: 805f11a0d5 (um: ubd: Add REQ_FLUSH suppport) Signed-off-by: Thorsten Knabe <linux@thorsten-knabe.de> Cc: stable@kernel.org # >= 3.12 Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds1-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu offlining patch from Ingo Molnar: "This tree includes a single commit that speeds up x86 suspend/resume by replacing a naive 100msec sleep based polling loop with proper completion notification. This gives some real suspend/resume benefit on servers with larger core counts" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smpboot: Speed up suspend/resume by avoiding 100ms sleep for CPU offline during S3
2014-10-13Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds2-17/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Three small cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tty/serial/8250: Clean up the asm/serial.h include file a bit x86/tty/serial/8250: Resolve missing-field-initializers warnings x86: Remove obsolete comment in uapi/e820.h
2014-10-13Merge branch 'x86-build-for-linus' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build update from Ingo Molnar: "A single commit that simplifies the no-FPU-ops build options" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kbuild: Eliminate duplicate command line options
2014-10-13Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds4-80/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 bootup updates from Ingo Molnar: "The changes in this cycle were: - Fix rare SMP-boot hang (mostly in virtual environments) - Fix build warning with certain (rare) toolchains" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/relocs: Make per_cpu_load_addr static x86/smpboot: Initialize secondary CPU only if master CPU will wait for it
2014-10-13Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds7-68/+61
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The changes in this cycle were: - Speed up the x86 __preempt_schedule() implementation - Fix/improve low level asm code debug info annotations" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Unwind-annotate thunk_32.S x86: Improve cmpxchg8b_emu.S x86: Improve cmpxchg16b_emu.S x86/lib/Makefile: Remove the unnecessary "+= thunk_64.o" x86: Speed up ___preempt_schedule*() by using THUNK helpers
2014-10-13um: delete unnecessary bootmem struct page arrayHonggang Li3-33/+8
1) uml kernel bootmem managed through bootmem_data->node_bootmem_map, not the struct page array, so the array is unnecessary. 2) the bootmem struct page array has been pointed by a *local* pointer, struct page *map, in init_maps function. The array can be accessed only in init_maps's scope. As a result, uml kernel wastes about 1% of total memory. Signed-off-by: Honggang Li <enjoymindful@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13um: remove csum_partial_copy_generic_i386 to clean up exception tableHonggang Li1-239/+0
arch/x86/um/checksum_32.S had been copy & paste from x86. When build x86 uml, csum_partial_copy_generic_i386 mess up the exception table. In fact, exception table dose not work in uml kernel. And csum_partial_copy_generic_i386 never been called. So, delete it. Signed-off-by: Honggang Li <enjoymindful@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds11-29/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-13Merge branch 'perf-core-for-linus' of ↵Linus Torvalds12-3638/+4588
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side updates: - Fix and enhance poll support (Jiri Olsa) - Re-enable inheritance optimization (Jiri Olsa) - Enhance Intel memory events support (Stephane Eranian) - Refactor the Intel uncore driver to be more maintainable (Zheng Yan) - Enhance and fix Intel CPU and uncore PMU drivers (Peter Zijlstra, Andi Kleen) - [ plus various smaller fixes/cleanups ] User visible tooling updates: - Add +field argument support for --field option, so that one can add fields to the default list of fields to show, ie now one can just do: perf report --fields +pid And the pid will appear in addition to the default fields (Jiri Olsa) - Add +field argument support for --sort option (Jiri Olsa) - Honour -w in the report tools (report, top), allowing to specify the widths for the histogram entries columns (Namhyung Kim) - Properly show submicrosecond times in 'perf kvm stat' (Christian Borntraeger) - Add beautifier for mremap flags param in 'trace' (Alex Snast) - perf script: Allow callchains if any event samples them - Don't truncate Intel style addresses in 'annotate' (Alex Converse) - Allow profiling when kptr_restrict == 1 for non root users, kernel samples will just remain unresolved (Andi Kleen) - Allow configuring default options for callchains in config file (Namhyung Kim) - Support operations for shared futexes. (Davidlohr Bueso) - "perf kvm stat report" improvements by Alexander Yarygin: - Save pid string in opts.target.pid - Enable the target.system_wide flag - Unify the title bar output - [ plus lots of other fixes and small improvements. ] Tooling infrastructure changes: - Refactor unit and scale function parameters for PMU parsing routines (Matt Fleming) - Improve DSO long names lookup with rbtree, resulting in great speedup for workloads with lots of DSOs (Waiman Long) - We were not handling POLLHUP notifications for event file descriptors Fix it by filtering entries in the events file descriptor array after poll() returns, refcounting mmaps so that when the last fd pointing to a perf mmap goes away we do the unmap (Arnaldo Carvalho de Melo) - Intel PT prep work, from Adrian Hunter, including: - Let a user specify a PMU event without any config terms - Add perf-with-kcore script - Let default config be defined for a PMU - Add perf_pmu__scan_file() - Add a 'perf test' for tracking with sched_switch - Add 'flush' callback to scripting API - Use ring buffer consume method to look like other tools (Arnaldo Carvalho de Melo) - hists browser (used in top and report) refactorings, getting rid of unused variables and reducing source code size by handling similar cases in a fewer functions (Namhyung Kim). - Replace thread unsafe strerror() with strerror_r() accross the whole tools/perf/ tree (Masami Hiramatsu) - Rename ordered_samples to ordered_events and allow setting a queue size for ordering events (Jiri Olsa) - [ plus lots of fixes, cleanups and other improvements ]" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (198 commits) perf/x86: Tone down kernel messages when the PMU check fails in a virtual environment perf/x86/intel/uncore: Fix minor race in box set up perf record: Fix error message for --filter option not coming after tracepoint perf tools: Fix build breakage on arm64 targets perf symbols: Improve DSO long names lookup speed with rbtree perf symbols: Encapsulate dsos list head into struct dsos perf bench futex: Sanitize -q option in requeue perf bench futex: Support operations for shared futexes perf trace: Fix mmap return address truncation to 32-bit perf tools: Refactor unit and scale function parameters perf tools: Fix line number in the config file error message perf tools: Convert {record,top}.call-graph option to call-graph.record-mode perf tools: Introduce perf_callchain_config() perf callchain: Move some parser functions to callchain.c perf tools: Move callchain config from record_opts to callchain_param perf hists browser: Fix callchain print bug on TUI perf tools: Use ACCESS_ONCE() instead of volatile cast perf tools: Modify error code for when perf_session__new() fails perf tools: Fix perf record as non root with kptr_restrict == 1 perf stat: Fix --per-core on multi socket systems ...
2014-10-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds5-177/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main updates in this cycle were: - mutex MCS refactoring finishing touches: improve comments, refactor and clean up code, reduce debug data structure footprint, etc. - qrwlock finishing touches: remove old code, self-test updates. - small rwsem optimization - various smaller fixes/cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Revert qrwlock recusive stuff locking/rwsem: Avoid double checking before try acquiring write lock locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code locking/semaphore: Resolve some shadow warnings locking/selftest: Support queued rwlock locking/lockdep: Restrict the use of recursive read_lock() with qrwlock locking/spinlocks: Always evaluate the second argument of spin_lock_nested() locking/Documentation: Update locking/mutex-design.txt disadvantages locking/Documentation: Move locking related docs into Documentation/locking/ locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate locking/mutexes: Refactor optimistic spinning code locking/mcs: Remove obsolete comment locking/mutexes: Document quick lock release when unlocking locking/mutexes: Standardize arguments in lock/unlock slowpaths locking: Remove deprecated smp_mb__() barriers
2014-10-13Merge branch 'locking-arch-for-linus' of ↵Linus Torvalds30-2172/+1462
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull arch atomic cleanups from Ingo Molnar: "This is a series kept separate from the main locking tree, which cleans up and improves various details in the atomics type handling: - Remove the unused atomic_or_long() method - Consolidate and compress atomic ops implementations between architectures, to reduce linecount and to make it easier to add new ops. - Rewrite generic atomic support to only require cmpxchg() from an architecture - generate all other methods from that" * 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read() locking, mips: Fix atomics locking, sparc64: Fix atomics locking,arch: Rewrite generic atomic support locking,arch,xtensa: Fold atomic_ops locking,arch,sparc: Fold atomic_ops locking,arch,sh: Fold atomic_ops locking,arch,powerpc: Fold atomic_ops locking,arch,parisc: Fold atomic_ops locking,arch,mn10300: Fold atomic_ops locking,arch,mips: Fold atomic_ops locking,arch,metag: Fold atomic_ops locking,arch,m68k: Fold atomic_ops locking,arch,m32r: Fold atomic_ops locking,arch,ia64: Fold atomic_ops locking,arch,hexagon: Fold atomic_ops locking,arch,cris: Fold atomic_ops locking,arch,avr32: Fold atomic_ops locking,arch,arm64: Fold atomic_ops locking,arch,arm: Fold atomic_ops ...
2014-10-13Merge branch 'for-linus' of ↵Linus Torvalds2-29/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The big thing in this pile is Eric's unmount-on-rmdir series; we finally have everything we need for that. The final piece of prereqs is delayed mntput() - now filesystem shutdown always happens on shallow stack. Other than that, we have several new primitives for iov_iter (Matt Wilcox, culled from his XIP-related series) pushing the conversion to ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c cleanups and fixes (including the external name refcounting, which gives consistent behaviour of d_move() wrt procfs symlinks for long and short names alike) and assorted cleanups and fixes all over the place. This is just the first pile; there's a lot of stuff from various people that ought to go in this window. Starting with unionmount/overlayfs mess... ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits) fs/file_table.c: Update alloc_file() comment vfs: Deduplicate code shared by xattr system calls operating on paths reiserfs: remove pointless forward declaration of struct nameidata don't need that forward declaration of struct nameidata in dcache.h anymore take dname_external() into fs/dcache.c let path_init() failures treated the same way as subsequent link_path_walk() fix misuses of f_count() in ppp and netlink ncpfs: use list_for_each_entry() for d_subdirs walk vfs: move getname() from callers to do_mount() gfs2_atomic_open(): skip lookups on hashed dentry [infiniband] remove pointless assignments gadgetfs: saner API for gadgetfs_create_file() f_fs: saner API for ffs_sb_create_file() jfs: don't hash direct inode [s390] remove pointless assignment of ->f_op in vmlogrdr ->open() ecryptfs: ->f_op is never NULL android: ->f_op is never NULL nouveau: __iomem misannotations missing annotation in fs/file.c fs: namespace: suppress 'may be used uninitialized' warnings ...
2014-10-12parisc: Reduce SIGRTMIN from 37 to 32 to behave like other Linux architecturesHelge Deller1-10/+6
This patch reduces the value of SIGRTMIN on PARISC from 37 to 32, thus increasing the number of available RT signals and bring it in sync with other Linux architectures. Historically we wanted to natively support HP-UX 32bit binaries with the PA-RISC Linux port. Because of that we carried the various available signals from HP-UX (e.g. SIGEMT and SIGLOST) and folded them in between the native Linux signals. Although this was the right decision at that time, this required us to increase SIGRTMIN to at least 37 which left us with 27 (64-37) RT signals. Those 27 RT signals haven't been a problem in the past, but with the upcoming importance of systemd we now got the problem that systemd alloctes (hardcoded) signals up to SIGRTMIN+29 which is beyond our NSIG of 64. Because of that we have not been able to use systemd on the PARISC Linux port yet. Of course we could ask the systemd developers to not use those hardcoded values, but this change is very unlikely, esp. with PA-RISC being a niche architecture. The other possibility would be to increase NSIG to e.g. 128, but this would mean to duplicate most of the existing Linux signal handling code into the parisc specific Linux kernel tree which would most likely introduce lots of new bugs beside the code duplication. The third option is to drop some HP-UX signals and shuffle some other signals around to bring SIGRTMIN to 32. This is of course an ABI change, but testing has shown that existing Linux installations are not visibly affected by this change - most likely because we move those signals around which are rarely used and move them to slots which haven't been used in Linux yet. In an existing installation I was able to exchange either the Linux kernel or glibc (or both) without affecting the boot process and installed applications. Dropping the HP-UX signals isn't an issue either, since support for HP-UX was basically dropped a few months back with Kernel 3.14 in commit f5a408d53edef3af07ac7697b8bc54a755628450 already, when we changed EWOULDBLOCK to be equal to EAGAIN. So, even if this is an ABI change, it's better to change it now and thus bring PARISC Linux in sync with other architectures to avoid other issues in the future. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Carlos O'Donell <carlos@systemhalted.org> Cc: John David Anglin <dave.anglin@bell.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: PARISC Linux Kernel Mailinglist <linux-parisc@vger.kernel.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
2014-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+31
Pull networking fixes from David Miller: "This set fixes a bunch of fallout from the changes that went in during this merge window, particularly: - Fix fsl_pq_mdio (Claudiu Manoil) and fm10k (Pranith Kumar) build failures. - Several networking drivers do atomic_set() on page counts where that's not exactly legal. From Eric Dumazet. - Make __skb_flow_get_ports() work cleanly with unaligned data, from Alexander Duyck. - Fix some kernel-doc buglets in rfkill and netlabel, from Fabian Frederick. - Unbalanced enable_irq_wake usage in bcmgenet and systemport drivers, from Florian Fainelli. - pxa168_eth needs to depend on HAS_DMA, from Geert Uytterhoeven. - Multi-dequeue in the qdisc layer severely bypasses the fairness limits the previous code used to enforce, reintroduce in a way that at the same time doesn't compromise bulk dequeue opportunities. From Jesper Dangaard Brouer. - macvlan receive path unnecessarily hops through a softirq by using netif_rx() instead of netif_receive_skb(). From Jason Baron" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits) net: systemport: avoid unbalanced enable_irq_wake calls net: bcmgenet: avoid unbalanced enable_irq_wake calls net: bcmgenet: fix off-by-one in incrementing read pointer net: fix races in page->_count manipulation mlx4: fix race accessing page->_count ixgbe: fix race accessing page->_count igb: fix race accessing page->_count fm10k: fix race accessing page->_count net/phy: micrel: Add clock support for KSZ8021/KSZ8031 flow-dissector: Fix alignment issue in __skb_flow_get_ports net: filter: fix the comments Documentation: replace __sk_run_filter with __bpf_prog_run macvlan: optimize the receive path macvlan: pass 'bool' type to macvlan_count_rx() drivers: net: xgene: Add 10GbE ethtool support drivers: net: xgene: Add 10GbE support drivers: net: xgene: Preparing for adding 10GbE support dtb: Add 10GbE node to APM X-Gene SoC device tree Documentation: dts: Update section header for APM X-Gene MAINTAINERS: Update APM X-Gene section ...
2014-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds39-754/+1117
Pull sparc updates from David Miller: 1) Move to 4-level page tables on sparc64 and support up to 53-bits of physical addressing. Kernel static image BSS size reduced by several megabytes. 2) M6/M7 cpu support, from Allan Pais. 3) Move to sparse IRQs, handle hypervisor TLB call errors more gracefully, and add T5 perf_event support. From Bob Picco. 4) Recognize cdroms and compute geometry from capacity in virtual disk driver, also from Allan Pais. 5) Fix memset() return value on sparc32, from Andreas Larsson. 6) Respect gfp flags in dma_alloc_coherent on sparc32, from Daniel Hellstrom. 7) Fix handling of compound pages in virtual disk driver, from Dwight Engen. 8) Fix lockdep warnings in LDC layer by moving IRQ requesting to ldc_alloc() from ldc_bind(). 9) Increase boot string length to 1024 bytes, from Dave Kleikamp. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: (31 commits) sparc64: Fix lockdep warnings on reboot on Ultra-5 sparc64: Increase size of boot string to 1024 bytes sparc64: Kill unnecessary tables and increase MAX_BANKS. sparc64: sparse irq sparc64: Adjust vmalloc region size based upon available virtual address bits. sparc64: Increase MAX_PHYS_ADDRESS_BITS to 53. sparc64: Use kernel page tables for vmemmap. sparc64: Fix physical memory management regressions with large max_phys_bits. sparc64: Adjust KTSB assembler to support larger physical addresses. sparc64: Define VA hole at run time, rather than at compile time. sparc64: Switch to 4-level page tables. sparc64: Fix reversed start/end in flush_tlb_kernel_range() sparc64: Add vio_set_intr() to enable/disable Rx interrupts vio: fix reuse of vio_dring slot sunvdc: limit each sg segment to a page sunvdc: compute vdisk geometry from capacity sunvdc: add cdrom and v1.1 protocol support sparc: VIO protocol version 1.6 sparc64: Fix hibernation code refrence to PAGE_OFFSET. sparc64: Move request_irq() from ldc_bind() to ldc_alloc() ...
2014-10-12Merge branch 'for-linus' of ↵Linus Torvalds198-1551/+3177
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ...
2014-10-12Merge tag 'stable/for-linus-3.18-rc0-tag' of ↵Linus Torvalds16-167/+426
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from David Vrabel: "Features and fixes: - Add pvscsi frontend and backend drivers. - Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses. - Try and keep memory contiguous during PV memory setup (reduces SWIOTLB usage). - Allow front/back drivers to use threaded irqs. - Support large initrds in PV guests. - Fix PVH guests in preparation for Xen 4.5" * tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits) xen: remove DEFINE_XENBUS_DRIVER() macro xen/xenbus: Remove BUG_ON() when error string trucated xen/xenbus: Correct the comments for xenbus_grant_ring() x86/xen: Set EFER.NX and EFER.SCE in PVH guests xen: eliminate scalability issues from initrd handling xen: sync some headers with xen tree xen: make pvscsi frontend dependant on xenbus frontend arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options xen-scsifront: don't deadlock if the ring becomes full x86: remove the Xen-specific _PAGE_IOMAP PTE flag x86/xen: do not use _PAGE_IOMAP PTE flag for I/O mappings x86: skip check for spurious faults for non-present faults xen/efi: Directly include needed headers xen-scsiback: clean up a type issue in scsiback_make_tpg() xen-scsifront: use GFP_ATOMIC under spin_lock MAINTAINERS: Add xen pvscsi maintainer xen-scsiback: Add Xen PV SCSI backend driver xen-scsifront: Add Xen PV SCSI frontend driver xen: Add Xen pvSCSI protocol description xen/events: support threaded irqs for interdomain event channels ...
2014-10-11Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds3-6/+2
Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe ..
2014-10-11Merge branch 'for-v3.18' of ↵Linus Torvalds3-30/+22
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull dma-mapping update from Marek Szyprowski: "Provide the dma write coherent api (available previously on ARM architecture) for all other architectures, which use dma_ops-based dma mapping implementation. This lets one to use the same code in the device drivers regardless of the selected architecture" * 'for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: dma-mapping: Provide write-combine allocations s390: Implement dma_{alloc,free}_attrs()
2014-10-11Merge tag 'restart-handler-for-v3.18' of ↵Linus Torvalds2-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull restart handler infrastructure from Guenter Roeck: "This series was supposed to be pulled through various trees using it, and I did not plan to send a separate pull request. As it turns out, the pinctrl tree did not merge with it, is now upstream, and uses it, meaning there are now build failures. Please pull this series directly to fix those build failures" * tag 'restart-handler-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: arm/arm64: unexport restart handlers watchdog: sunxi: register restart handler with kernel restart handler watchdog: alim7101: register restart handler with kernel restart handler watchdog: moxart: register restart handler with kernel restart handler arm: support restart through restart handler call chain arm64: support restart through restart handler call chain power/restart: call machine_restart instead of arm_pm_restart kernel: add support for kernel restart handler call chain
2014-10-10sparc64: Fix lockdep warnings on reboot on Ultra-5David S. Miller1-3/+4
Inconsistently, the raw_* IRQ routines do not interact with and update the irqflags tracing and lockdep state, whereas the raw_* spinlock interfaces do. This causes problems in p1275_cmd_direct() because we disable hardirqs by hand using raw_local_irq_restore() and then do a raw_spin_lock() which triggers a lockdep trace because the CPU's hw IRQ state doesn't match IRQ tracing's internal software copy of that state. The CPU's irqs are disabled, yet current->hardirqs_enabled is true. ==================== reboot: Restarting system ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3536 check_flags+0x7c/0x240() DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) Modules linked in: openpromfs CPU: 0 PID: 1 Comm: systemd-shutdow Tainted: G W 3.17.0-dirty #145 Call Trace: [000000000045919c] warn_slowpath_common+0x5c/0xa0 [0000000000459210] warn_slowpath_fmt+0x30/0x40 [000000000048f41c] check_flags+0x7c/0x240 [0000000000493280] lock_acquire+0x20/0x1c0 [0000000000832b70] _raw_spin_lock+0x30/0x60 [000000000068f2fc] p1275_cmd_direct+0x1c/0x60 [000000000068ed28] prom_reboot+0x28/0x40 [000000000043610c] machine_restart+0x4c/0x80 [000000000047d2d4] kernel_restart+0x54/0x80 [000000000047d618] SyS_reboot+0x138/0x200 [00000000004060b4] linux_sparc_syscall32+0x34/0x60 ---[ end trace 5c439fe81c05a100 ]--- possible reason: unannotated irqs-off. irq event stamp: 2010267 hardirqs last enabled at (2010267): [<000000000049a358>] vprintk_emit+0x4b8/0x580 hardirqs last disabled at (2010266): [<0000000000499f08>] vprintk_emit+0x68/0x580 softirqs last enabled at (2010046): [<000000000045d278>] __do_softirq+0x378/0x4a0 softirqs last disabled at (2010039): [<000000000042bf08>] do_softirq_own_stack+0x28/0x40 Resetting ... ==================== Use local_* variables of the hw IRQ interfaces so that IRQ tracing sees all of our changes. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>