summaryrefslogtreecommitdiff
path: root/block/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2024-06-14block: remove the blk_integrity_profile structureChristoph Hellwig1-6/+2
Block layer integrity configuration is a bit complex right now, as it indirects through operation vectors for a simple two-dimensional configuration: a) the checksum type of none, ip checksum, crc, crc64 b) the presence or absence of a reference tag Remove the integrity profile, and instead add a separate csum_type flag which replaces the existing ip-checksum field and a new flag that indicates the presence of the reference tag. This removes up to two layers of indirect calls, remove the need to offload the no-op verification of non-PI metadata to a workqueue and generally simplifies the code. The downside is that block/t10-pi.c now has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY already, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-09blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOWYu Kuai1-11/+0
One the one hand, it's marked EXPERIMENTAL since 2017, and looks like there are no users since then, and no testers and no developers, it's just not active at all. On the other hand, even if the config is disabled, there are still many fields in throtl_grp and throtl_data and many functions that are only used for throtl low. At last, currently blk-throtl is initialized during disk initialization, and destroyed during disk removal, and it exposes many functions to be called directly from block layer. Remove throtl low to make code much more cleaner and follow up work much easier. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240509121107.3195568-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONEDDamien Le Moal1-1/+0
Now that zone block device write ordering control does not depend anymore on mq-deadline and zone write locking, there is no need to force select the mq-deadline scheduler when CONFIG_BLK_DEV_ZONED is enabled. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-28-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17block: Move zone related debugfs attribute to blk-zoned.cDamien Le Moal1-4/+0
block/blk-mq-debugfs-zone.c contains a single debugfs attribute function. Defining this outside of block/blk-zoned.c does not really help in any way, so move this zone related debugfs attribute to block/blk-zoned.c and delete block/blk-mq-debugfs-zone.c. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-25-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-18block: Add config option to not allow writing to mounted devicesJan Kara1-0/+20
Writing to mounted devices is dangerous and can lead to filesystem corruption as well as crashes. Furthermore syzbot comes with more and more involved examples how to corrupt block device under a mounted filesystem leading to kernel crashes and reports we can do nothing about. Add tracking of writers to each block device and a kernel cmdline argument which controls whether other writeable opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are allowed. We will make filesystems use this flag for used devices. Note that this effectively only prevents modification of the particular block device's page cache by other writers. The actual device content can still be modified by other means - e.g. by issuing direct scsi commands, by doing writes through devices lower in the storage stack (e.g. in case loop devices, DM, or MD are involved) etc. But blocking direct modifications of the block device page cache is enough to give filesystems a chance to perform data validation when loading data from the underlying storage and thus prevent kernel crashes. Syzbot can use this cmdline argument option to avoid uninteresting crashes. Also users whose userspace setup does not need writing to mounted block devices can set this option for hardening. Link: https://lore.kernel.org/all/60788e5d-5c7c-1142-e554-c21d709acfd9@linaro.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20231101174325.10596-3-jack@suse.cz Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-17powerpc/pseries: PLPKS SED Opal keystore supportGreg Joyce1-0/+1
Define operations for SED Opal to read/write keys from POWER LPAR Platform KeyStore(PLPKS). This allows non-volatile storage of SED Opal keys. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Link: https://lore.kernel.org/r/20231004201957.1451669-4-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-22block: sed-opal: keyring support for SED keysGreg Joyce1-0/+2
Extend the SED block driver so it can alternatively obtain a key from a sed-opal kernel keyring. The SED ioctls will indicate the source of the key, either directly in the ioctl data or from the keyring. This allows the use of SED commands in scripts such as udev scripts so that drives may be automatically unlocked as they become available. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-4-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02block: use iomap for writes to block devicesChristoph Hellwig1-0/+1
Use iomap in buffer_head compat mode to write to block devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230801172201.1923299-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-26Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linuxLinus Torvalds1-5/+0
Pull block updates from Jens Axboe: - drbd patches, bringing us closer to unifying the out-of-tree version and the in tree one (Andreas, Christoph) - support for auto-quiesce for the s390 dasd driver (Stefan) - MD pull request via Song: - md/bitmap: Optimal last page size (Jon Derrick) - Various raid10 fixes (Yu Kuai, Li Nan) - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk) - NVMe pull request via Christoph: - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - Validate nvmet module parameters (Chaitanya Kulkarni) - Fence TCP socket on receive error (Chris Leech) - Fix async event trace event (Keith Busch) - Minor cleanups (Chaitanya Kulkarni, zhenwei pi) - Fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - Fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - Fix irq locking in nvme-fcloop (Ming Lei) - Remove queue mapping helper for rdma devices (Sagi Grimberg) - use structured request attribute checks for nbd (Jakub) - fix blk-crypto race conditions between keyslot management (Eric) - add sed-opal support for reading read locking range attributes (Ondrej) - make fault injection configurable for null_blk (Akinobu) - clean up the request insertion API (Christoph) - clean up the queue running API (Christoph) - blkg config helper cleanups (Tejun) - lazy init support for blk-iolatency (Tejun) - various fixes and tweaks to ublk (Ming) - remove hybrid polling. It hasn't really been useful since we got async polled IO support, and these days we don't support sync polled IO at all (Keith) - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming, Chaitanya, me) * tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits) nbd: fix incomplete validation of ioctl arg ublk: don't return 0 in case of any failure sed-opal: geometry feature reporting command null_blk: Always check queue mode setting from configfs block: ublk: switch to ioctl command encoding blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush block, bfq: Fix division by zero error on zero wsum fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m block: store bdev->bd_disk->fops->submit_bio state in bdev block: re-arrange the struct block_device fields for better layout md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer ...
2023-04-17block: make blkcg_punt_bio_submit optionalChristoph Hellwig1-0/+3
Guard all the code to punt bios to a per-cgroup submission helper by a new CONFIG_BLK_CGROUP_PUNT_BIO symbol that is selected by btrfs. This way non-btrfs kernel builds don't need to have this code. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-13blk-mq-rdma: remove queue mapping helper for rdma devicesSagi Grimberg1-5/+0
No rdma device exposes its irq vectors affinity today. So the only mapping that we have left, is the default blk_mq_map_queues, which we fallback to anyways. Also fixup the only consumer of this helper (nvme-rdma). Remove this now dead code. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-03-16block: remove obsolete config BLOCK_COMPATLukas Bulwahn1-3/+0
Before commit bdc1ddad3e5f ("compat_ioctl: block: move blkdev_compat_ioctl() into ioctl.c"), the config BLOCK_COMPAT was used to include compat_ioctl.c into the kernel build. With this commit, the code is moved into ioctl.c and included with the config COMPAT. So, since then, the config BLOCK_COMPAT has no effect and any further purpose. Remove this obsolete config BLOCK_COMPAT. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230316111630.4897-1-lukas.bulwahn@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-05block: Remove "select SRCU"Paul E. McKenney1-1/+0
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-29block: remove "select BLK_RQ_IO_DATA_LEN" from BLK_CGROUP_IOCOST dependencyYing Sun1-1/+0
The configuration item BLK_RQ_IO_DATA_LEN is not declared in the kernel. Select BLK_RQ_IO_DATA_LEN is meaningless which could be removed. Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220629062409.19458-1-sunying@nj.iscas.ac.cn Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-07block: add pi for extended integrityKeith Busch1-0/+1
The NVMe specification defines new data integrity formats beyond the t10 tuple. Add support for the specification defined CRC64 formats, assuming the reference tag does not need to be split with the "storage tag". Cc: Hannes Reinecke <hare@suse.de> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220303201312.3255347-8-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-28block: default BLOCK_LEGACY_AUTOLOAD to yChristoph Hellwig1-5/+3
As Luis reported, losetup currently doesn't properly create the loop device without this if the device node already exists because old scripts created it manually. So default to y for now and remove the aggressive removal schedule. Reported-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220225181440.1351591-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17blk-mq: make the blk-mq stacking code optionalChristoph Hellwig1-0/+3
The code to stack blk-mq drivers is only used by dm-multipath, and will preferably stay that way. Make it optional and only selected by device mapper, so that the buildbots more easily catch abuses like the one that slipped in in the ufs driver in the last merged window. Another positive side effects is that kernel builds without device mapper shrink a little bit as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220215100540.3892965-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02block: deprecate autoloading based on dev_tChristoph Hellwig1-0/+12
Make the legacy dev_t based autoloading optional and add a deprecation warning. This kind of autoloading has ceased to be useful about 20 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220104071647.164918-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16block: only build the icq tracking code when neededChristoph Hellwig1-0/+3
Only bfq needs to code to track icq, so make it conditional. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211209063131.18537-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move menu "Partition type" to block/partitions/KconfigMasahiro Yamada1-4/+0
Move the menu to the relevant place. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210927140000.866249-4-masahiroy@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: simplify Kconfig filesMasahiro Yamada1-11/+7
Everything under block/ depends on BLOCK. BLOCK_HOLDER_DEPRECATED is selected from drivers/md/Kconfig, which is entirely dependent on BLOCK. Extend the 'if BLOCK' ... 'endif' so it covers the whole block/Kconfig. Also, clean up the definition of BLOCK_COMPAT and BLK_MQ_PCI because COMPAT and PCI are boolean. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210927140000.866249-3-masahiroy@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: remove redundant =y from BLK_CGROUP dependencyMasahiro Yamada1-3/+3
CONFIG_BLK_CGROUP is a boolean option, that is, its value is 'y' or 'n'. The comparison to 'y' is redundant. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210927140000.866249-2-masahiroy@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-23/+3
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, qla2xxx, target, smartpqi, lpfc, mpt3sas). The core change causing the most churn was replacing the command request field request with a macro, allowing us to offset map to it and remove the redundant field; the same was also done for the tag field. The most impactful change is the final removal of scsi_ioctl, which has been deprecated for over a decade" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits) scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1 scsi: ufs: ufs-exynos: Fix static checker warning scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Copyright updates for 14.0.0.1 patches scsi: lpfc: Update lpfc version to 14.0.0.1 scsi: lpfc: Add bsg support for retrieving adapter cmf data scsi: lpfc: Add cmf_info sysfs entry scsi: lpfc: Add debugfs support for cm framework buffers scsi: lpfc: Add support for maintaining the cm statistics buffer scsi: lpfc: Add rx monitoring statistics scsi: lpfc: Add support for the CM framework scsi: lpfc: Add cmfsync WQE support scsi: lpfc: Add support for cm enablement buffer scsi: lpfc: Add cm statistics buffer support scsi: lpfc: Add EDC ELS support scsi: lpfc: Expand FPIN and RDF receive logging scsi: lpfc: Add MIB feature enablement support scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware scsi: fc: Add EDC ELS definition ...
2021-08-09block: make the block holder code optionalChristoph Hellwig1-0/+4
Move the block holder code into a separate file as it is not in any way related to the other block_dev.c code, and add a new selectable config option for it so that we don't have to build it without any remapped drivers selected. The Kconfig symbol contains a _DEPRECATED suffix to match the comments added in commit 49731baa41df ("block: restore multiple bd_link_disk_holder() support"). Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20210804094147.459763-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02block: remove cmdline-parser.cChristoph Hellwig1-10/+0
cmdline-parser.c is only used by the cmdline faux partition format, so merge the code into that and avoid an indirect call. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-29scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMONChristoph Hellwig1-3/+0
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small amount of code shared by the SCSI initiator, target, and consumers of the scsi_request passthrough API. Rename it and also allow building it as a module. [mkp: add module license] Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-29scsi: bsg: Move bsg_scsi_ops to drivers/scsi/Christoph Hellwig1-20/+3
Move the SCSI-specific bsg code in the SCSI midlayer instead of in the common bsg code. This just keeps the common bsg code block/ and also allows building it as a module. Link: https://lore.kernel.org/r/20210724072033.1284840-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-04scsi: blkcg: Fix application ID config optionsMartin K. Petersen1-1/+1
Commit d2bcbeab4200 ("scsi: blkcg: Add app identifier support for blkcg") introduced an FC_APPID config option under SCSI. However, the added config option is not used anywhere. Simply remove it. The block layer BLK_CGROUP_FC_APPID config option is what actually controls whether the application ID code should be built or not. Make this option dependent on NVMe over FC since that is currently the only transport which supports the capability. Fixes: d2bcbeab4200 ("scsi: blkcg: Add app identifier support for blkcg") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+9
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
2021-06-22block: Introduce the ioprio rq-qos policyBart Van Assche1-0/+9
Introduce an rq-qos policy that assigns an I/O priority to requests based on blk-cgroup configuration settings. This policy has the following advantages over the ioprio_set() system call: - This policy is cgroup based so it has all the advantages of cgroups. - While ioprio_set() does not affect page cache writeback I/O, this rq-qos controller affects page cache writeback I/O for filesystems that support assiociating a cgroup with writeback I/O. See also Documentation/admin-guide/cgroup-v2.rst. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-5-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/Kconfig: Make the BLK_WBT and BLK_WBT_MQ entries consecutiveBart Van Assche1-7/+7
These entries were consecutive at the time of their introduction but are no longer consecutive. Make these again consecutive. Additionally, modify the help text since it refers to blk-mq and since the legacy block layer has been removed. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20210618004456.7280-2-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10scsi: blkcg: Add app identifier support for blkcgMuneendra Kumar1-0/+9
Add a unique application identifier (i.e fc_app_id member) in blkcg. This allows identification of traffic belonging to an specific both on the host and in the fabric infrastructure. As an example, this allows the storage stack to uniquely identify traffic belong to particular virtual machine. Link: https://lore.kernel.org/r/20210608043556.274139-3-muneendra.kumar@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02blk-wbt: Remove obsolete multiqueue I/O scheduling commentDanny Lin1-2/+0
This comment was added before the multiqueue I/O scheduler framework was introduced; multiqueue has support for I/O scheduling now, so this obsolete comment can be removed. Signed-off-by: Danny Lin <danny@kdrag0n.dev> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08nvme: support for zoned namespacesKeith Busch1-2/+3
Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined in NVM Express TP4053. Zoned namespaces are discovered based on their Command Set Identifier reported in the namespaces Namespace Identification Descriptor list. A successfully discovered Zoned Namespace will be registered with the block layer as a host managed zoned block device with Zone Append command support. A namespace that does not support append is not supported by the driver. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <keith.busch@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-11/+11
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-14block: blk-crypto-fallback for Inline EncryptionSatya Tangirala1-0/+10
Blk-crypto delegates crypto operations to inline encryption hardware when available. The separately configurable blk-crypto-fallback contains a software fallback to the kernel crypto API - when enabled, blk-crypto will use this fallback for en/decryption when inline encryption hardware is not available. This lets upper layers not have to worry about whether or not the underlying device has support for inline encryption before deciding to specify an encryption context for a bio. It also allows for testing without actual inline encryption hardware - in particular, it makes it possible to test the inline encryption code in ext4 and f2fs simply by running xfstests with the inlinecrypt mount option, which in turn allows for things like the regular upstream regression testing of ext4 to cover the inline encryption code paths. For more details, refer to Documentation/block/inline-encryption.rst. Signed-off-by: Satya Tangirala <satyat@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14block: Keyslot Manager for Inline EncryptionSatya Tangirala1-0/+7
Inline Encryption hardware allows software to specify an encryption context (an encryption key, crypto algorithm, data unit num, data unit size) along with a data transfer request to a storage device, and the inline encryption hardware will use that context to en/decrypt the data. The inline encryption hardware is part of the storage device, and it conceptually sits on the data path between system memory and the storage device. Inline Encryption hardware implementations often function around the concept of "keyslots". These implementations often have a limited number of "keyslots", each of which can hold a key (we say that a key can be "programmed" into a keyslot). Requests made to the storage device may have a keyslot and a data unit number associated with them, and the inline encryption hardware will en/decrypt the data in the requests using the key programmed into that associated keyslot and the data unit number specified with the request. As keyslots are limited, and programming keys may be expensive in many implementations, and multiple requests may use exactly the same encryption contexts, we introduce a Keyslot Manager to efficiently manage keyslots. We also introduce a blk_crypto_key, which will represent the key that's programmed into keyslots managed by keyslot managers. The keyslot manager also functions as the interface that upper layers will use to program keys into inline encryption hardware. For more information on the Keyslot Manager, refer to documentation found in block/keyslot-manager.c and linux/keyslot-manager.h. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-01blk-iocost: account for IO size when testing latenciesTejun Heo1-0/+1
On each IO completion, iocost decides whether the IO met or missed its latency target. Currently, the targets are fixed numbers per IO type. While this can be good enough for loose latency targets way higher than typical completion latencies, the effect of IO size makes it difficult to tighten the latency target - a target adequate for 4k IOs might be too tight for 512k IOs and vice-versa. iocost already has all the necessary information to account for different IO sizes when testing whether the latency target is met as iocost can calculate the size vtime cost of a given IO. This patch updates the completion path to calculate the size vtime cost of the IO, deduct the nsec equivalent from the observed latency and use the adjusted value to decide whether the target is met. This makes latency targets independent from IO size and enables determining adequate latency targets with fixed size fio runs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-07block: Allow t10-pi to be modularHerbert Xu1-1/+5
Currently t10-pi can only be built into the block layer which via crc-t10dif pulls in a whole chunk of the Crypto API. In fact all users of t10-pi work as modules and there is no reason for it to always be built-in. This patch adds a new hidden option for t10-pi that is selected automatically based on BLK_DEV_INTEGRITY and whether the users of t10-pi are built-in or not. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTATTejun Heo1-0/+4
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on cgroup1. Let's move it into its own files and gate it behind a config option. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-29blkcg: implement blk-iocostTejun Heo1-0/+10
This patchset implements IO cost model based work-conserving proportional controller. While io.latency provides the capability to comprehensively prioritize and protect IOs depending on the cgroups, its protection is binary - the lowest latency target cgroup which is suffering is protected at the cost of all others. In many use cases including stacking multiple workload containers in a single system, it's necessary to distribute IO capacity with better granularity. One challenge of controlling IO resources is the lack of trivially observable cost metric. The most common metrics - bandwidth and iops - can be off by orders of magnitude depending on the device type and IO pattern. However, the cost isn't a complete mystery. Given several key attributes, we can make fairly reliable predictions on how expensive a given stream of IOs would be, at least compared to other IO patterns. The function which determines the cost of a given IO is the IO cost model for the device. This controller distributes IO capacity based on the costs estimated by such model. The more accurate the cost model the better but the controller adapts based on IO completion latency and as long as the relative costs across differents IO patterns are consistent and sensible, it'll adapt to the actual performance of the device. Currently, the only implemented cost model is a simple linear one with a few sets of default parameters for different classes of device. This covers most common devices reasonably well. All the infrastructure to tune and add different cost models is already in place and a later patch will also allow using bpf progs for cost models. Please see the top comment in blk-iocost.c and documentation for more details. v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix for a divide-by-zero bug in current_hweight() triggered by zero inuse_sum. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-29blk-mq: add optional request->alloc_time_nsTejun Heo1-0/+3
There are currently two start time timestamps - start_time_ns and io_start_time_ns. The former marks the request allocation and and the second issue-to-device time. The planned io.weight controller needs to measure the total time bios take to execute after it leaves rq_qos including the time spent waiting for request to become available, which can easily dominate on saturated devices. This patch adds request->alloc_time_ns which records when the request allocation attempt started. As it isn't used for the usual stats, make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are no users and it's active only on queues which need it even when compiled in. v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME gating as suggested by Jens. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-15docs: cgroup-v1: add it to the admin-guide bookMauro Carvalho Chehab1-1/+1
Those files belong to the admin guide, so add them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: block: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the block documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-09Merge branch 'for-5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Documentation updates and the addition of cgroup_parse_float() which will be used by new controllers including blk-iocost" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: convert docs to ReST and rename to *.rst cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS cgroup: add cgroup_parse_float()
2019-06-14docs: cgroup-v1: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
Convert the cgroup-v1 files to ReST format, in order to allow a later addition to the admin-guide. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-06-13block: force select mq-deadline for zoned block devicesDamien Le Moal1-0/+1
In most use cases of zoned block devices (aka SMR disks), the mq-deadline scheduler is mandatory as it implements sequential write command processing guarantees with zone write locking. So make sure that this scheduler is always enabled if CONFIG_BLK_DEV_ZONED is selected. Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: remove CONFIG_LBDAFChristoph Hellwig1-24/+0
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit architectures. These types are required to support block device and/or file sizes larger than 2 TiB, and have generally defaulted to on for a long time. Enabling the option only increases the i386 tinyconfig size by 145 bytes, and many data structures already always use 64-bit values for their in-core and on-disk data structures anyway, so there should not be a large change in dynamic memory usage either. Dropping this option removes a somewhat weird non-default config that has cause various bugs or compiler warnings when actually used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-30Merge tag 'kconfig-v4.21' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
2018-12-21treewide: surround Kconfig file paths with double quotesMasahiro Yamada1-1/+1
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>