summaryrefslogtreecommitdiff
path: root/block/blk-core.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-16block: clear REQ_HIPRI if polling is not supportedChristoph Hellwig1-0/+3
This prevents a HIPRI bio from being submitted through a stacking driver that does not support polling and thus won't poll for I/O completion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16blk-mq: replace and kill blk_mq_request_issue_directlyJianchao Wang1-1/+3
Replace blk_mq_request_issue_directly with blk_mq_try_issue_directly in blk_insert_cloned_request and kill it as nobody uses it any more. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: delete part_round_stats and switch to less precise countingMikulas Patocka1-58/+4
We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block: stop passing 'cpu' to all percpu stats methodsMike Snitzer1-19/+15
All of part_stat_* and related methods are used with preempt disabled, so there is no need to pass cpu around to allow of them. Just call smp_processor_id() as needed. Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04block: remove ->poll_fnChristoph Hellwig1-23/+0
This was intended to support users like nvme multipath, but is just getting in the way and adding another indirect call. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-01block: add cmd_flags to print_req_errorBalbir Singh1-4/+5
I ran into a bug where after hibernation due to incompatible backends, the block driver returned BLK_STS_NOTSUPP, with the current message it's hard to find out what the command flags were. Adding req->cmd_flags help make the problem easier to diagnose. Reviewed-by: Eduardo Valentin <eduval@amazon.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29blk-mq: use bd->last == true for list insertsJens Axboe1-1/+1
If we are issuing a list of requests, we know if we're at the last one. If we fail issuing, ensure that we call ->commits_rqs() to flush any potential previous requests. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29block: improve logic around when to sort a plug listJens Axboe1-0/+1
Only do it if we have requests for multiple queues in the same plug. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: sum requests in the plug structureJens Axboe1-26/+4
This isn't exactly the same as the previous count, as it includes requests for all devices. But that really doesn't matter, if we have more than the threshold (16) queued up, flush it. It's not worth it to have an expensive list loop for this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: make blk_poll() take a parameter on whether to spin or notJens Axboe1-3/+6
blk_poll() has always kept spinning until it found an IO. This is fine for SYNC polling, since we need to find one request we have pending, but in preparation for ASYNC polling it can be beneficial to just check if we have any entries available or not. Existing callers are converted to pass in 'spin == true', to retain the old behavior. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26blk-mq: when polling for IO, look for any completionJens Axboe1-2/+11
If we want to support async IO polling, then we have to allow finding completions that aren't just for the one we are looking for. Always pass in -1 to the mq_ops->poll() helper, and have that return how many events were found in this poll loop. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-20block: Initialize BIO I/O priority earlyDamien Le Moal1-4/+1
For the synchronous I/O path case (read(), write() etc system calls), a BIO I/O priority is not initialized until the execution of blk_init_request_from_bio() when the BIO is submitted and a request initialized for the BIO execution. This is due to the ki_ioprio field of the struct kiocb defined on stack being always initialized to IOPRIO_CLASS_NONE, regardless of the calling process I/O context ioprio value set with ioprio_set(). This late initialization can result in the BIO being merged to pending requests even when the I/O priorities differ. Fix this by initializing the ki_iopriority field of on stack struct kiocb using the get_current_ioprio() helper, ensuring that all BIOs allocated and submitted for the system call execution see the correct intended I/O priority early. With this, since a BIO I/O priority is always set to the intended effective value for both the sync and async path, blk_init_request_from_bio() can be simplified. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-20block: prevent merging of requests with different prioritiesDamien Le Moal1-3/+0
Growing in size a high priority request by merging it with a lower priority BIO or request will increase the request execution time. This is the opposite result of the desired effect of high I/O priorities, namely getting low I/O latencies. Prevent merging of requests and BIOs that have different I/O priorities to fix this. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-20block: Introduce get_current_ioprio()Damien Le Moal1-5/+1
Define get_current_ioprio() as an inline helper to obtain the caller I/O priority from its task I/O context. Use this helper in blk_init_request_from_bio() to set a request ioprio. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-20block: Remove bio->bi_iocDamien Le Moal1-1/+1
bio->bi_ioc is never set so always NULL. Remove references to it in bio_disassociate_task() and in rq_ioc() and delete this field from struct bio. With this change, rq_ioc() always returns current->io_context without the need for a bio argument. Further simplify the code and make it more readable by also removing this helper, which also allows to simplify blk_mq_sched_assign_ioc() by removing its bio argument. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-19Merge tag 'v4.20-rc3' into for-4.21/blockJens Axboe1-3/+2
Merge in -rc3 to resolve a few conflicts, but also to get a few important fixes that have gone into mainline since the block 4.21 branch was forked off (most notably the SCSI queue issue, which is both a conflict AND needed fix). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16block: add queue_is_mq() helperJens Axboe1-6/+6
Various spots check for q->mq_ops being non-NULL, but provide a helper to do this instead. Where the ->mq_ops != NULL check is redundant, remove it. Since mq == rq-based now that legacy is gone, get rid of the queue_is_rq_based() and just use queue_is_mq() everywhere. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove the queue_lock indirectionChristoph Hellwig1-9/+1
With the legacy request path gone there is no good reason to keep queue_lock as a pointer, we can always use the embedded lock now. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Fixed floppy and blk-cgroup missing conversions and half done edits. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove the lock argument to blk_alloc_queue_nodeChristoph Hellwig1-13/+3
With the legacy request path gone there is no real need to override the queue_lock. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: use atomic bitops for ->queue_flagsChristoph Hellwig1-47/+7
->queue_flags is generally not set or cleared in the fast path, and also generally set or cleared one flag at a time. Make use of the normal atomic bitops for it so that we don't need to take the queue_lock, which is otherwise mostly unused in the core block layer now. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove QUEUE_FLAG_BYPASS and ->bypassChristoph Hellwig1-21/+0
Unused since the removal of the legacy request code. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14SCSI: fix queue cleanup race before queue initialization is doneMing Lei1-3/+2
c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones <drjones@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Cc: jianchao.wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: remove req->timeout_listChristoph Hellwig1-1/+0
Unused now that the legacy request path is gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: kill request ->cpu memberJens Axboe1-2/+0
This was used for completion placement for the legacy path, but for mq we have rq->mq_ctx->cpu for that. Add a helper to get the request CPU assignment, as the mq_ctx type is private to blk-mq. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: kill request slab cacheJens Axboe1-8/+0
Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove request_list codeJens Axboe1-75/+0
It's now dead code, nobody uses it. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: kill legacy parts of timeout handlingJens Axboe1-1/+0
The only user of legacy timing now is BSG, which is invoked from the mq timeout handler. Kill the legacy code, and rename the q->rq_timed_out_fn to q->bsg_job_timeout_fn. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove __blk_put_request()Jens Axboe1-9/+0
Now there's no difference between blk_put_request() and __blk_put_request() anymore, get rid of the underscore version and convert the few callers. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove dead elevator codeJens Axboe1-1695/+14
This removes a bunch of core and elevator related code. On the core front, we remove anything related to queue running, draining, initialization, plugging, and congestions. We also kill anything related to request allocation, merging, retrieval, and completion. Remove any checking for single queue IO schedulers, as they no longer exist. This means we can also delete a bunch of code related to request issue, adding, completion, etc - and all the SQ related ops and helpers. Also kill the load_default_modules(), as all that did was provide for a way to load the default single queue elevator. Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove legacy rq taggingJens Axboe1-6/+0
It's now unused, kill it. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove q->lld_busy_fn()Jens Axboe1-2/+0
Nobody is using the legacy path for blk_lld_busy() anymore, remove it. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07blk-mq: provide mq_ops->busy() hookJens Axboe1-0/+2
We'll hook into this from blk_lld_busy(), allowing blk-mq to also return whether or not a given queue currently has requests in progress. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-02blkcg: revert blkcg cleanups seriesDennis Zhou1-1/+0
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: d459d853c2ed, b2c3fa546705, 101246ec02b5, b3b9f24f5fcc, e2b0989954ae, f0fcb3ec89f3, c839e7a03f92, bdc2491708c4, 74b7c02a9bc1, 5bf9a1f3b4ef, a7b39b4e961c, 07b05bcc3213, 49f4c2dc2b50, 27e6fa996c53 Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-31block: call rq_qos_exit() after queue is frozenMing Lei1-0/+3
rq_qos_exit() removes the current q->rq_qos, this action has to be done after queue is frozen, otherwise the IO queue path may never be waken up, then IO hang is caused. So fixes this issue by moving rq_qos_exit() after queue is frozen. Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: add a report_zones methodChristoph Hellwig1-1/+0
Dispatching a report zones command through the request queue is a major pain due to the command reply payload rewriting necessary. Given that blkdev_report_zones() is executing everything synchronously, implement report zones as a block device file operation instead, allowing major simplification of the code in many places. sd, null-blk, dm-linear and dm-flakey being the only block device drivers supporting exposing zoned block devices, these drivers are modified to provide the device side implementation of the report_zones() block device file operation. For device mappers, a new report_zones() target type operation is defined so that the upper block layer calls blkdev_report_zones() can be propagated down to the underlying devices of the dm targets. Implementation for this new operation is added to the dm-linear and dm-flakey targets. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Changed method block_device argument to gendisk * Various bug fixes and improvements * Added support for null_blk, dm-linear and dm-flakey. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-21blkcg: reassociate bios when make_request() is called recursivelyDennis Zhou1-0/+1
When submitting a bio, multiple recursive calls to make_request() may occur. This causes the initial associate done in blkcg_bio_issue_check() to be incorrect and reference the prior request_queue. This introduces a helper to do reassociation when make_request() is recursively called. Fixes: a7b39b4e961c ("blkcg: always associate a bio with a blkg") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Dennis Zhou <dennis@kernel.org> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14block: remove bogus check for queue_lock assignmentJens Axboe1-2/+1
We just allocated the queue and haven't even set it up yet, hence we know that checking if ->mq_ops is NULL is always going to be true. In fact we do need to assign a lock to ->queue_lock always, as we need it for the queue flags modifications. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14blk-mq: change gfp flags to GFP_NOIO in blk_mq_realloc_hw_ctxsJianchao Wang1-1/+1
blk_mq_realloc_hw_ctxs could be invoked during update hw queues. At the momemt, IO is blocked. Change the gfp flags from GFP_KERNEL to GFP_NOIO to avoid forever hang during memory allocation in blk_mq_realloc_hw_ctxs. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01Merge tag 'v4.19-rc6' into for-4.20/blockJens Axboe1-3/+1
Merge -rc6 in, for two reasons: 1) Resolve a trivial conflict in the blk-mq-tag.c documentation 2) A few important regression fixes went into upstream directly, so they aren't in the 4.20 branch. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v4.19-rc6': (780 commits) Linux 4.19-rc6 MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c cpufreq: qcom-kryo: Fix section annotations perf/core: Add sanity check to deal with pinned event failure xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" selftests/powerpc: Fix Makefiles for headers_install change blk-mq: I/O and timer unplugs are inverted in blktrace dax: Fix deadlock in dax_lock_mapping_entry() x86/boot: Fix kexec booting failure in the SEV bit detection code bcache: add separate workqueue for journal_write to avoid deadlock drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" xen/blkfront: When purging persistent grants, keep them in the buffer clocksource/drivers/timer-atmel-pit: Properly handle error cases block: fix deadline elevator drain for zoned block devices ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-27block: Make blk_get_request() block for non-PM requests while suspendedBart Van Assche1-29/+8
Instead of allowing requests that are not power management requests to enter the queue in runtime suspended status (RPM_SUSPENDED), make the blk_get_request() caller block. This change fixes a starvation issue: it is now guaranteed that power management requests will be executed no matter how many blk_get_request() callers are waiting. For blk-mq, instead of maintaining the q->nr_pending counter, rely on q->q_usage_counter. Call pm_runtime_mark_last_busy() every time a request finishes instead of only if the queue depth drops to zero. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-27block: Schedule runtime resume earlierBart Van Assche1-1/+2
Instead of scheduling runtime resume of a request queue after a request has been queued, schedule asynchronous resume during request allocation. The new pm_request_resume() calls occur after blk_queue_enter() has increased the q_usage_counter request queue member. This change is needed for a later patch that will make request allocation block while the queue status is not RPM_ACTIVE. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-27block: Split blk_pm_add_request() and blk_pm_put_request()Bart Van Assche1-0/+1
Move the pm_request_resume() and pm_runtime_mark_last_busy() calls into two new functions and thereby separate legacy block layer code from code that works for both the legacy block layer and blk-mq. A later patch will add calls to the new functions in the blk-mq code. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-27block, scsi: Change the preempt-only flag into a counterBart Van Assche1-17/+18
The RQF_PREEMPT flag is used for three purposes: - In the SCSI core, for making sure that power management requests are executed even if a device is in the "quiesced" state. - For domain validation by SCSI drivers that use the parallel port. - In the IDE driver, for IDE preempt requests. Rename "preempt-only" into "pm-only" because the primary purpose of this mode is power management. Since the power management core may but does not have to resume a runtime suspended device before performing system-wide suspend and since a later patch will set "pm-only" mode as long as a block device is runtime suspended, make it possible to set "pm-only" mode from more than one context. Since with this change scsi_device_quiesce() is no longer idempotent, make that function return early if it is called for a quiesced queue. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-27block: Move power management code into a new source fileBart Van Assche1-195/+1
Move the code for runtime power management from blk-core.c into the new source file blk-pm.c. Move the corresponding declarations from <linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out the declarations of the functions that are not used in that mode. This patch not only reduces the number of #ifdefs in the block layer core code but also reduces the size of header file <linux/blkdev.h> and hence should help to reduce the build time of the Linux kernel if CONFIG_PM is not defined. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-22block: use nanosecond resolution for iostatOmar Sandoval1-3/+1
Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: Klaus Kusche <klaus.kusche@computerix.info> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-06block: don't warn when doing fsync on read-only devicesMikulas Patocka1-1/+4
It is possible to call fsync on a read-only handle (for example, fsck.ext2 does it when doing read-only check), and this call results in kernel warning. The patch b089cfd95d32 ("block: don't warn for flush on read-only device") attempted to disable the warning, but it is buggy and it doesn't (op_is_flush tests flags, but bio_op strips off the flags). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+3
Pull more block updates from Jens Axboe: - Set of bcache fixes and changes (Coly) - The flush warn fix (me) - Small series of BFQ fixes (Paolo) - wbt hang fix (Ming) - blktrace fix (Steven) - blk-mq hardware queue count update fix (Jianchao) - Various little fixes * tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits) block/DAC960.c: make some arrays static const, shrinks object size blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter blk-mq: init hctx sched after update ctx and hctx mapping block: remove duplicate initialization tracing/blktrace: Fix to allow setting same value pktcdvd: fix setting of 'ret' error return for a few cases block: change return type to bool block, bfq: return nbytes and not zero from struct cftype .write() method block, bfq: improve code of bfq_bfqq_charge_time block, bfq: reduce write overcharge block, bfq: always update the budget of an entity when needed block, bfq: readd missing reset of parent-entity service blk-wbt: fix IO hang in wbt_wait() block: don't warn for flush on read-only device bcache: add the missing comments for smp_mb()/smp_wmb() bcache: remove unnecessary space before ioctl function pointer arguments bcache: add missing SPDX header bcache: move open brace at end of function definitions to next line bcache: add static const prefix to char * array declarations bcache: fix code comments style ...
2018-08-17block: remove duplicate initializationChaitanya Kulkarni1-1/+0
This patch removes the duplicate initialization of q->queue_head in the blk_alloc_queue_node(). This removes the 2nd initialization so that we preserve the initialization order same as declaration present in struct request_queue. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-14Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-blockLinus Torvalds1-45/+61
Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...
2018-08-14block: don't warn for flush on read-only deviceJens Axboe1-1/+3
Don't warn for a flush issued to a read-only device. It's not strictly a writable command, as it doesn't change any on-media data by itself. Reported-by: Stefan Agner <stefan@agner.ch> Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions") Signed-off-by: Jens Axboe <axboe@kernel.dk>