summaryrefslogtreecommitdiff
path: root/block/blk-lib.c
AgeCommit message (Collapse)AuthorFilesLines
2017-09-11block: fix integer overflow in __blkdev_sectors_to_bio_pages()Mikulas Patocka1-2/+2
Fix possible integer overflow in __blkdev_sectors_to_bio_pages if sector_t is 32-bit. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 615d22a51c04 ("block: Fix __blkdev_issue_zeroout loop") Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-4/+4
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-06block: Fix __blkdev_issue_zeroout loopDamien Le Moal1-5/+18
The BIO issuing loop in __blkdev_issue_zeroout() is allocating BIOs with a maximum number of bvec (pages) equal to min(nr_sects, (sector_t)BIO_MAX_PAGES) This works since the requested number of bvecs will always be limited to the absolute maximum number supported (BIO_MAX_PAGES), but this is ineficient as too many bvec entries may be requested due to the different units being used in the min() operation (number of sectors vs number of pages). To fix this, introduce the helper __blkdev_sectors_to_bio_pages() to correctly calculate the number of bvecs for zeroout BIOs as the issuing loop progresses. The calculation is done using consistent units and makes sure that the number of pages return is at least 1 (for cases where the number of sectors is less that the number of sectors in a page). Also remove a trailing space after the bit shift in the internal loop min() call. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-04-08block: remove the discard_zeroes_data flagChristoph Hellwig1-6/+1
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can kill this hack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: stop using discards for zeroingChristoph Hellwig1-6/+6
Now that we have REQ_OP_WRITE_ZEROES implemented for all devices that support efficient zeroing, we can remove the call to blkdev_issue_discard. This means we only have two ways of zeroing left and can simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a new BLKDEV_ZERO_NOFALLBACK flagChristoph Hellwig1-1/+4
This avoids fallbacks to explicit zeroing in (__)blkdev_issue_zeroout if the caller doesn't want them. Also clean up the convoluted check for the return condition that this new flag is added to. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a REQ_NOUNMAP flag for REQ_OP_WRITE_ZEROESChristoph Hellwig1-14/+5
If this flag is set logical provisioning capable device should release space for the zeroed blocks if possible, if it is not set devices should keep the blocks anchored. Also remove an out of sync kerneldoc comment for a static function that would have become even more out of data with this change. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a flags argument to (__)blkdev_issue_zerooutChristoph Hellwig1-17/+14
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with similar semantics, but without referring to diѕcard. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: stop using blkdev_issue_write_same for zeroingChristoph Hellwig1-4/+0
We'll always use the WRITE ZEROES code for zeroing now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-25block: correct documentation for blkdev_issue_discard() flagsEric Biggers1-1/+1
BLKDEV_IFL_* flags no longer exist; blkdev_issue_discard() now actually takes BLKDEV_DISCARD_* flags. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06block: don't try Write Same from __blkdev_issue_zerooutChristoph Hellwig1-5/+4
Write Same can return an error asynchronously if it turns out the underlying SCSI device does not support Write Same, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a Write Same from blkdev_issue_zeroout an don't try it at all from __blkdev_issue_zeroout as a non-invasive workaround. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-14block: don't try to discard from __blkdev_issue_zerooutChristoph Hellwig1-7/+6
Discard can return -EIO asynchronously if the alignment for the request isn't suitable for the driver, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a sync discard from blkdev_issue_zeroout an don't try discard at all from __blkdev_issue_zeroout as a non-invasive workaround. One more reason why abusing discard for zeroing must die.. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Eryu Guan <eguan@redhat.com> Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-09block: improve handling of the magic discard payloadChristoph Hellwig1-1/+1
Instead of allocating a single unused biovec for discard requests, send them down without any payload. Instead we allow the driver to add a "special" payload using a biovec embedded into struct request (unioned over other fields never used while in the driver), and overloading the number of segments for this case. This has a couple of advantages: - we don't have to allocate the bio_vec - the amount of special casing for discard requests in the block layer is significantly reduced - using this same scheme for other request types is trivial, which will be important for implementing the new WRITE_ZEROES op on devices where it actually requires a payload (e.g. SCSI) - we can get rid of playing games with the request length, as we'll never touch it and completions will work just fine - it will allow us to support ranged discard operations in the future by merging non-contiguous discard bios into a single request - last but not least it removes a lot of code This patch is the common base for my WIP series for ranges discards and to remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES, so it would be good to get it in quickly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: add support for REQ_OP_WRITE_ZEROESChaitanya Kulkarni1-2/+56
This adds a new block layer operation to zero out a range of LBAs. This allows to implement zeroing for devices that don't use either discard with a predictable zero pattern or WRITE SAME of zeroes. The prominent example of that is NVMe with the Write Zeroes command, but in the future, this should also help with improving the way zeroing discards work. For this operation, suitable entry is exported in sysfs which indicate the number of maximum bytes allowed in one write zeroes operation by the device. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: add async variant of blkdev_issue_zerooutChaitanya Kulkarni1-34/+81
Similar to __blkdev_issue_discard this variant allows submitting the final bio asynchronously and chaining multiple ranges into a single completion. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28block: better op and flags encodingChristoph Hellwig1-1/+1
Now that we don't need the common flags to overflow outside the range of a 32-bit type we can encode them the same way for both the bio and request fields. This in addition allows us to place the operation first (and make some room for more ops while we're at it) and to stop having to shift around the operation values. In addition this allows passing around only one value in the block layer instead of two (and eventuall also in the file systems, but we can do that later) and thus clean up a lot of code. Last but not least this allows decreasing the size of the cmd_flags field in struct request to 32-bits. Various functions passing this value could also be updated, but I'd like to avoid the churn for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12block: require write_same and discard requests align to logical block sizeDarrick J. Wong1-0/+15
Make sure that the offset and length arguments that we're using to construct WRITE SAME and DISCARD requests are actually aligned to the logical block size. Failure to do this causes other errors in other parts of the block layer or the SCSI layer because disks don't support partial logical block writes. Link: http://lkml.kernel.org/r/147518379026.22791.4437508871355153928.stgit@birch.djwong.org Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header Cc: Brian Foster <bfoster@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-18/+26
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-27Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-14/+17
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-21block: don't ignore -EOPNOTSUPP blkdev_issue_write_sameChristoph Hellwig1-1/+1
WRITE SAME is a data integrity operation and we can't simply ignore errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-21block: introduce BLKDEV_DISCARD_ZERO to fix zerooutChristoph Hellwig1-6/+11
Currently blkdev_issue_zeroout cascades down from discards (if the driver guarantees that discards zero data), to WRITE SAME and then to a loop writing zeroes. Unfortunately we ignore run-time EOPNOTSUPP errors in the block layer blkdev_issue_discard helper to work around DM volumes that may have mixed discard support underneath. This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to blkdev_issue_discard that indicates we are called for zeroing operation. This allows both to ignore the EOPNOTSUPP hack and actually consolidating the discard_zeroes_data check into the function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09block: add a separate operation type for secure eraseChristoph Hellwig1-11/+14
Instead of overloading the discard support with the REQ_SECURE flag. Use the opportunity to rename the queue flag as well, and remove the dead checks for this flag in the RAID 1 and RAID 10 drivers that don't claim support for secure erase. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block discard: use bio set op accessorMike Christie1-6/+7
This converts the block issue discard helper and users to use the bio_set_op_attrs accessor and only pass in the operation flags like REQ_SEQURE. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie1-2/+2
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie1-9/+11
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: missing bio_put following submit_bio_waitShaun Tancheff1-3/+9
submit_bio_wait() gives the caller an opportunity to examine struct bio and so expects the caller to issue the put_bio() This fixes a memory leak reported by a few people in 4.7-rc2 kmemleak report after 9082e87bfbf8 ("block: remove struct bio_batch") Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Larry Finger@lwfinger.net Tested-by: David Drysdale <drysdale@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-05block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discardMike Snitzer1-2/+5
Commit 38f25255330 ("block: add __blkdev_issue_discard") incorrectly disallowed the early return of -EOPNOTSUPP if the device doesn't support discard (or secure discard). This early return of -EOPNOTSUPP has always been part of blkdev_issue_discard() interface so there isn't a good reason to break that behaviour -- especially when it can be easily reinstated. The nuance of allowing early return of -EOPNOTSUPP vs disallowing late return of -EOPNOTSUPP is: if the overall device never advertised support for discards and one is issued to the device it is beneficial to inform the caller that discards are not supported via -EOPNOTSUPP. But if a device advertises discard support it means that at least a subset of the device does have discard support -- but it could be that discards issued to some regions of a stacked device will not be supported. In that case the late return of -EOPNOTSUPP must be disallowed. Fixes: 38f25255330 ("block: add __blkdev_issue_discard") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02block: add __blkdev_issue_discardChristoph Hellwig1-26/+37
This is a version of blkdev_issue_discard which doesn't wait for the I/O to complete, but instead allows the caller to submit the final bio and/or chain it to others. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02block: remove struct bio_batchChristoph Hellwig1-91/+27
It can be replaced with a combination of bio_chain and submit_bio_wait. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-28block: re-add discard_granularity and alignment checksMing Lin1-9/+22
In commit b49a087("block: remove split code in blkdev_issue_{discard,write_same}"), discard_granularity and alignment checks were removed. Ideally, with bio late splitting, the upper layers shouldn't need to depend on device's limits. Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe device when mkfs.xfs. We have not found the root cause yet. This patch re-adds discard_granularity and alignment checks by reverting the related changes in commit b49a087. The good thing is now we can remove the 2G discard size cap and just use UINT_MAX to avoid bi_size overflow. Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: remove split code in blkdev_issue_{discard,write_same}Ming Lin1-36/+11
The split code in blkdev_issue_{discard,write_same} can go away now that any driver that cares does the split. We have to make sure bio size doesn't overflow. For discard, we set max discard sectors to (1<<31)>>9 to ensure it doesn't overflow bi_size and hopefully it is of the proper granularity as long as the granularity is a power of two. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig1-17/+13
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-05block: Quiesce zeroout wrapperMartin K. Petersen1-19/+7
blkdev_issue_zeroout() printed a warning if a device failed a discard or write same request despite advertising support for these. That's fine for SCSI since we'll disable these commands if we get an error back from the disk saying that they are not supported. And consequently the warning only gets printed once. There are other types of block devices that support discard, however, and these may return -EOPNOTSUPP for each command but leave discard enabled in the queue limits. This will cause a warning message for every blkdev_issue_zeroout() invocation. Remove the offending warning messages. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-21block: Add discard flag to blkdev_issue_zeroout() functionMartin K. Petersen1-4/+26
blkdev_issue_discard() will zero a given block range. This is done by way of explicit writing, thus provisioning or allocating the blocks on disk. There are use cases where the desired behavior is to zero the blocks but unprovision them if possible. The blocks must deterministically contain zeroes when they are subsequently read back. This patch adds a flag to blkdev_issue_zeroout() that provides this variant. If the discard flag is set and a block device guarantees discard_zeroes_data we will use REQ_DISCARD to clear the block range. If the device does not support discard_zeroes_data or if the discard request fails we will fall back to first REQ_WRITE_SAME and then a regular REQ_WRITE. Also update the callers of blkdev_issue_zero() to reflect the new flag and make sb_issue_zeroout() prefer the discard approach. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27block/blk-lib.c: make __blkdev_issue_zeroout staticFabian Frederick1-2/+2
__blkdev_issue_zeroout is only used in blk-lib.c Cc: Jens Axboe <axboe@kernel.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-12block: add cond_resched() to potentially long running ioctl discard loopJens Axboe1-0/+8
When mkfs issues a full device discard and the device only supports discards of a smallish size, we can loop in blkdev_issue_discard() for a long time. If preempt isn't enabled, this can turn into a softlock situation and the kernel will start complaining. Add an explicit cond_resched() at the end of the loop to avoid that. Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2013-11-24block: Abstract out bvec iteratorKent Overstreet1-6/+6
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-11-08block: Do not call sector_div() with a 64-bit divisorGeert Uytterhoeven1-6/+4
do_div() (called by sector_div() if CONFIG_LBDAF=y) is meant for divisions of 64-bit number by 32-bit numbers. Passing 64-bit divisor types caused issues in the past on 32-bit platforms, cfr. commit ea077b1b96e073eac5c3c5590529e964767fc5f7 ("m68k: Truncate base in do_div()"). As queue_limits.max_discard_sectors and .discard_granularity are unsigned int, max_discard_sectors and granularity should be unsigned int. As bdev_discard_alignment() returns int, alignment should be int. Now 2 calls to sector_div() can be replaced by 32-bit arithmetic: - The 64-bit modulo operation can become a 32-bit modulo operation, - The 64-bit division and multiplication can be replaced by a 32-bit modulo operation and a subtraction. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-15block: account iowait time when waiting for completion of IO requestVladimir Davydov1-3/+3
Using wait_for_completion() for waiting for a IO request to be executed results in wrong iowait time accounting. For example, a system having the only task doing write() and fdatasync() on a block device can be reported being idle instead of iowaiting as it should because blkdev_issue_flush() calls wait_for_completion() which in turn calls schedule() that does not increment the iowait proc counter and thus does not turn on iowait time accounting. The patch makes block layer use wait_for_completion_io() instead of wait_for_completion() where appropriate to account iowait time correctly. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-12-14block: add plug for blkdev_issue_discardShaohua Li1-0/+3
Last post of this patch appears lost, so I resend this. Now discard merge works, add plug for blkdev_issue_discard. This will help discard request merge especially for raid0 case. In raid0, a big discard request is split to small requests, and if correct plug is added, such small requests can be merged in low layer. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-12-14block: discard granularity might not be power of 2Shaohua Li1-10/+13
In MD raid case, discard granularity might not be power of 2, for example, a 4-disk raid5 has 3*chunk_size discard granularity. Correct the calculation for such cases. Reported-by: Neil Brown <neilb@suse.de> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20block: Make blkdev_issue_zeroout use WRITE SAMEMartin K. Petersen1-1/+29
If the device supports WRITE SAME, use that to optimize zeroing of blocks. If the device does not support WRITE SAME or if the operation fails, fall back to writing zeroes the old-fashioned way. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20block: Implement support for WRITE SAMEMartin K. Petersen1-0/+74
The WRITE SAME command supported on some SCSI devices allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O. This patch implements support for WRITE SAME in the block layer. The blkdev_issue_write_same() function can be used by filesystems and block drivers to replicate a buffer across a block range. This can be used to efficiently initialize software RAID devices, etc. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-02block: split discard into aligned requestsPaolo Bonzini1-10/+24
When a disk has large discard_granularity and small max_discard_sectors, discards are not split with optimal alignment. In the limit case of discard_granularity == max_discard_sectors, no request could be aligned correctly, so in fact you might end up with no discarded logical blocks at all. Another example that helps showing the condition in the patch is with discard_granularity == 64, max_discard_sectors == 128. A request that is submitted for 256 sectors 2..257 will be split in two: 2..129, 130..257. However, only 2 aligned blocks out of 3 are included in the request; 128..191 may be left intact and not discarded. With this patch, the first request will be truncated to ensure good alignment of what's left, and the split will be 2..127, 128..255, 256..257. The patch will also take into account the discard_alignment. At most one extra request will be introduced, because the first request will be reduced by at most granularity-1 sectors, and granularity must be less than max_discard_sectors. Subsequent requests will run on round_down(max_discard_sectors, granularity) sectors, as in the current code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-02block: reorganize rounding of max_discard_sectorsPaolo Bonzini1-4/+5
Mostly a preparation for the next patch. In principle this fixes an infinite loop if max_discard_sectors < granularity, but that really shouldn't happen. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-07-23block: fix patch import error in max_discard_sectors checkJens Axboe1-1/+1
A '!' snuck in before the unlikely, rendering it useless. Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-06block: eliminate potential for infinite loop in blkdev_issue_discardMike Snitzer1-1/+4
Due to the recently identified overflow in read_capacity_16() it was possible for max_discard_sectors to be zero but still have discards enabled on the associated device's queue. Eliminate the possibility for blkdev_issue_discard to infinitely loop. Interestingly this issue wasn't identified until a device, whose discard_granularity was 0 due to read_capacity_16 overflow, was consumed by blk_stack_limits() to construct limits for a higher-level DM multipath device. The multipath device's resulting limits never had the discard limits stacked because blk_stack_limits() will only do so if the bottom device's discard_granularity != 0. This resulted in the multipath device's limits.max_discard_sectors being 0. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-07blkdev: Do not return -EOPNOTSUPP if discard is supportedLukas Czerner1-7/+2
Currently we return -EOPNOTSUPP in blkdev_issue_discard() if any of the bio fails due to underlying device not supporting discard request. However, if the device is for example dm device composed of devices which some of them support discard and some of them does not, it is ok for some bios to fail with EOPNOTSUPP, but it does not mean that discard is not supported at all. This commit removes the check for bios failed with EOPNOTSUPP and change blkdev_issue_discard() to return operation not supported if and only if the device does not actually supports it, not just part of the device as some bios might indicate. This change also fixes problem with BLKDISCARD ioctl() which now works correctly on such dm devices. Signed-off-by: Lukas Czerner <lczerner@redhat.com> CC: Jens Axboe <jaxboe@fusionio.com> CC: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-07blkdev: Simple cleanup in blkdev_issue_zeroout()Lukas Czerner1-14/+0
In blkdev_issue_zeroout() we are submitting regular WRITE bios, so we do not need to check for -EOPNOTSUPP specifically in case of error. Also there is no need to have label submit: because there is no way to jump out from the while cycle without an error and we really want to exit, rather than try again. And also remove the check for (sz == 0) since at that point sz can never be zero. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> CC: Dmitry Monakhov <dmonakhov@openvz.org> CC: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-07blkdev: Submit discard bio in batches in blkdev_issue_discard()Lukas Czerner1-40/+29
Currently we are waiting for every submitted REQ_DISCARD bio separately, but it can have unwanted consequences of repeatedly flushing the queue, so we rather submit bios in batches and wait for the entire batch, hence narrowing the window of other ios going in. Use bio_batch_end_io() and struct bio_batch for that purpose, the same is used by blkdev_issue_zeroout(). Also change bio_batch_end_io() so we always set !BIO_UPTODATE in the case of error and remove the check for bb, since we are the only user of this function and we always set this. Remove bio_get()/bio_put() from the blkdev_issue_discard() since bio_alloc() and bio_batch_end_io() is doing the same thing, hence it is not needed anymore. I have done simple dd testing with surprising results. The script I have used is: for i in $(seq 10); do echo $i dd if=/dev/sdb1 of=/dev/sdc1 bs=4k & sleep 5 done /usr/bin/time -f %e ./blkdiscard /dev/sdc1 Running time of BLKDISCARD on the whole device: with patch without patch 0.95 15.58 So we can see that in this artificial test the kernel with the patch applied is approx 16x faster in discarding the device. Signed-off-by: Lukas Czerner <lczerner@redhat.com> CC: Dmitry Monakhov <dmonakhov@openvz.org> CC: Jens Axboe <jaxboe@fusionio.com> CC: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>